Search NASA⌕ Search

SEARCH · Search NASA

Results for “HYPERSONIC NOZZLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Fluid flow analysis of a hot-core hypersonic wind-tunnel nozzle concept

A hypersonic-wind-tunnel nozzle concept which incorporates a hot-core flow surrounded by an annular flow of cold air offers a promising technique for maximizing the model size while minimizing the power required to heat the test core. This capability becomes especially important when providing the true-temperature duplication needed for hypersonic propulsion testing. Several two-dimensional wind-tunnel nozzle configurations that are designed according to this concept are analyzed by using recently developed analytical techniques for prediction of the boundary-layer growth and the mixing between the hot and cold coaxial supersonic airflows. The analyses indicate that introduction of the cold annular flow near the throat results in an unacceptable test core for the nozzle size and stagnation conditions considered because of both mixing and condensation effects. Use of a half-nozzle with a ramp on the flat portion does not appear promising because of the thick boundary layer associated with the extra length. However, the analyses indicate that if the cold annular flow is introduced at the exit of a full two-dimensional nozzle, an acceptable test core will be produced. Predictions of the mixing between the hot and cold supersonic streams for this configuration show that mixing effects from the cold flow do not appreciably penetrate into the hot core for the large downstream distances of interest.

Anders, J. B.↗
DOE OSTI2024

Particle Image Velocimetry and Total Temperature Characterization of Arc-Heated Mach 4.5 Free Jet

Particle image velocimetry (PIV) measurements were conducted in the Arc-Heated Combustion Tunnel (ACT-II) on a high-enthalpy Mach 4.5 nozzle flow. The primary motivation for the current work is to establish the feasibility of PIV as a high-quality flow diagnostic technique in hypersonic arc-heated flows and produce a high-resolution hypersonic nozzle flow characterization, including nozzle free jet shear layer velocity profiles. Due to the uncertain nature of the gas composition in the flowfield of interest, PIV measurements of a supersonic wedge flow were used to couple the flow velocities to the oblique shock relations. This enabled a PIV-derived total temperature calculation that does not require a priori assumptions of the exact gas composition. A PIV expansion module was developed for this study, and proper seed sizing and material were selected for the present flow. An analysis of the seed particle response from the PIV measurements provided an initial validation of the seed performance while revealing potential issues with consistent seed sizing. These measurements and derived conditions represent a means of acquiring high-resolution velocimetry and temperature datasets that consider uncertainties in the experimental generation of hypersonic high-enthalpy flows.

Engineering↗
NASA NTRS2000

Inviscid Design of Hypersonic Wind Tunnel Nozzles for a Real Gas

A straightforward procedure has been developed to quickly determine an inviscid design of a hypersonic wind tunnel nozzle when the test crash is both calorically and thermally imperfect. This real gas procedure divides the nozzle into four distinct parts: subsonic, throat to conical, conical, and turning flow regions. The design process is greatly simplified by treating the imperfect gas effects only in the source flow region. This simplification can be justified for a large class of hypersonic wind tunnel nozzle design problems. The final nozzle design is obtained either by doing a classical boundary layer correction or by using this inviscid design as the starting point for a viscous design optimization based on computational fluid dynamics. An example of a real gas nozzle design is used to illustrate the method. The accuracy of the real gas design procedure is shown to compare favorably with an ideal gas design based on computed flow field solutions.

Korte, J. J.↗
NASA NTRS1996

Shock Tunnel Studies of Scramjet Phenomena

Work focussed on a large number of preliminary studies of supersonic combustion in a simple combustion duct - thrust nozzle combination, investigating effects of Mach number, equivalence ratio, combustor divergence, fuel injecting angle and other parameters with an influence on the combustion process. This phase lasted for some three or four years, during which strongest emphasis was placed on responding to the request for preliminary experimental information on high enthalpy effects, to support the technology maturation activities of the NASP program. As the need for preliminary data became less urgent, it was possible to conduct more systematic studies of high enthalpy combustion phenomena, and to initiate other projects aimed at improving the facilities and instrumentation used for studying scramjet phenomena at high enthalpies. The combustion studies were particularly directed towards hypersonic combustion, and to the effects of injecting fuel along the combustion chamber wall. A substantial effort was directed towards a study of the effect of scale on the supersonic combustion process. The influence of wave phenomena (both compression waves and expansion waves) on the realization of thrust from a supersonic combustion process was also investigated. The effect of chemical kinetics was looked into, particularly as it affected the composition of the test flow provided by a ground facility. The effect of injection of the fuel through wall orifices was compared with injection from a strut spanning the stream, and the effect of heating the fuel prior to injection was investigated. Studies of fuel-air mixing by shock impingement were also done, as well as mass spectrometer surveys of a combustion wake. The use of hypersonic nozzles with an expansion tube was investigated. A new method was developed for measuring the forces acting of a model in less than one millisecond. Also included in this report are listings of published journal papers and conference presentations.

Stalker, R. J.↗
NASA NTRS1972

Initial development of a hypersonic free mixing layer

A preliminary experimental investigation to establish some of the characteristics and further the understanding of the initial development of a turbulent free mixing layer for hypersonic speeds has been conducted. Mean profile data at about 6 inches downstream of the exit of a hypersonic nozzle have been obtained in nitrogen for a nominal Mach number of 19.5, total temperature of about 1670 K and Reynolds number range from about 50,000 to 110,000 per foot and have been compared with profiles upstream of the nozzle exit. Static pressure varied across the shear layer for the present tests. The outer 80 percent of the high-velocity portion of the free shear layer can be calculated by a rotational method of characteristics. However, turbulent mixing is evidently important in the low-velocity region, and effects of eddy viscosity and eddy conductivity should be included in a theoretical analysis.

Harvey, W. D.↗
NASA NTRS1987

Computational analysis of hypersonic airbreathing aircraft flow fields

The general problem of calculating the flow fields associated with hypersonic airbreathing aircraft is presented. Unique aspects of hypersonic aircraft aerodynamics are introduced and their demands on computational fluid dynamics are outlined. Example calculations associated with inlet/forebody integration and hypersonic nozzle design are presented to illustrate the nature of the problems considered.

Dwoyer, Douglas L.↗
NASA NTRS1987

Computational analysis of hypersonic airbreathing aircraft flow fields

The general problem of calculating the flow fields associated with hypersonic airbreathing aircrafts is presented. Unique aspects of hypersonic airplane aerodynamics are introduced and their demands on CFD are outlined. Example calculations associated with inlet/forebody integration and hypersonic nozzle design are presented to illustrate the nature of the problems considered.

Dwoyer, Douglas L.↗
NASA NTRS1987

Energetic oxygen atom material degradation studies

As part of a study designed to test potential Shuttle surface materials for the extents of degradation and mass loss expected to be suffered in space from the velocity impacts of ambient oxygen atoms, a novel technique was developed for generation of a high flux of energetic oxygen atoms. The generation technique involves laser-induced breakdown of molecular oxygen followed by a rapid expansion of energetic oxygen atoms. The high-velocity streams developed in an evacuated hypersonic nozzle have average O-atom velocities of about 5 to 13 km/s, with an estimated total production of 10 to the 18th atoms per pulse over pulse durations of several microseconds. Results on preliminary material degradation tests conducted with this test facility have been reported by Caledonia et al. (1987). Diagrams of the experimental setup are included.

Caledonia, George E.↗
NASA NTRS1993

Airfoil shape optimization using sensitivity analysis on viscous flow equations

An aerodynamic shape optimization method has previously been developed by the authors using the Euler equations and has been applied to supersonic-hypersonic nozzle designs. This method has also included a flowfield extrapolation (or flow prediction) method based on the Taylor series expansion of an existing CFD solution. The present paper reports on the extension of this method to the thin-layer Navier-Stokes equations in order to account for the viscous effects. Also, to test the method under highly nonlinear conditions, it has been applied to the transonic flows. Initially, the success of the flow prediction method is tested. Then, the overall method is demonstrated by optimizing the shapes of two supercritical transonic airfoils at zero angle of attack. The first one is shape optimized to achieve a minimum drag while obtaining a lift above a specified value. Whereas, the second one is shape optimized for a maximum lift while attaining a drag below a specified value. The results of these two cases indicate that the present method can produce successfully optimized aerodynamic shapes.

Eleshaky, Mohamed E.↗
NASA NTRS1999

The Mach 10 Component of NASA's Hyper-X Ground Test Program

The Mach 10 Hyper-X ground test program is described, in which experimental flowpath parametric testing is being done in the HYPULSE facility. This facility has been upgraded for this effort by adding a reflected-shock-tunnel operating mode to access test conditions at Mach 10 and below. A large test section and hypersonic nozzle have been installed to provide full-scale engine test capability and the instrumentation systems have been expanded. A model of the Hyper-X engine flowpath has been built for freejet testing in the shock tunnel at both Mach 7 and 10 flight conditions. The model has over 180 instrumentation ports, a pitot rake mountable at the engine inlet or exit, and optical windows for visualization of the isolator, combustor, and nozzle. Testing in HYPULSE has been completed at Mach 7 conditions to provide a link between pulse facility data and the large Hyper-X performance database that is being accumulated in long-duration facilities. Comparisons of Mach 7 data with computational predictions and with data recently acquired for an identical flowpath being tested in the NASA 8-foot High Temperature Tunnel are presented.

Bakos, R. J.↗
NASA NTRS1996

Effects of H2O Vapor on Vibrational Relaxation in Expanding and Contracting Flows

As opposed to previous explanations based on the effects of anharmonicity of simple diatomic molecules, traces of water vapor are suggested to be the most likely cause of the anomalously fast vibrational relaxation of such gases observed in supersonic and hypersonic nozzles. The mechanism is the strong V-VR coupling with H2O molecules that dramatically facilitates the collisional transfer of vibrational energy. Slight moisture content is thus a real world aspect of gas dynamics that must be considered in characterizations of shock tubes, reflected shock tunnels, and expansion tubes.

Meador, Willard E.↗
NASA NTRS1987

Aerodynamic design modification of a hypersonic wind tunnel nozzle by CSCM with high order accuracy

An improved version of the CSCM implicit Navier-Stokes solver with a flexible data structure has been applied, in conjunction with a sophisticated patched grid system, to the aerodynamic analysis of hypersonic axisymmetric contoured nozzles of the NASA-Ames 3.5-foot hypersonic wind tunnel. The results obtained are found to be in good agreement with experiment. Based on the analysis, a newly designed throat contour for the Mach 14 nozzle has been recommended.

Yang, J. Y.↗