Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Temperature Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Computational Methods For Composite Structures

Selected methods of computation for simulation of mechanical behavior of fiber/matrix composite materials described in report. For each method, report describes significance of behavior to be simulated, procedure for simulation, and representative results. Following applications discussed: effects of progressive degradation of interply layers on responses of composite structures, dynamic responses of notched and unnotched specimens, interlaminar fracture toughness, progressive fracture, thermal distortions of sandwich composite structure, and metal-matrix composite structures for use at high temperatures. Methods demonstrate effectiveness of computational simulation as applied to complex composite structures in general and aerospace-propulsion structural components in particular.

Chamis, Christos C.↗

Structure-Spin-Transport Anomaly in Quasi-One-Dimensional Ba9Fe3Te15 under High Pressure

Recently, a series of novel compounds Ba3MX5 (M= Fe, Ti, V; X=Se, Te) with hexagonal crystal structures composed of quasi-1-dimensional (1D) magnetic chains has been synthesized by our research team using high-pressure and high-temperature methods. The initial hexagonal phases persist to the maximum achievable pressure, while spin configurations and magnetic interactions may change dramatically as a result of considerable reductions in interchain separations upon pressurization. These compounds therefore offer unique possibilities for studying the evolution of intrinsic electronic structures in quasi-1D magnetic systems. Here we present a systematic investigation of Ba9Fe3Te15, in which the interchain separations between trimerized 1D chains (~10.2 Å) can be effectively modulated by external high pressure. The crystal structure especially along the 1D chains exhibits an abnormal expansion at ~5GPa, which accompanies trimerization entangled anomalous mixed-high-low spin transition. An insulator-metal transition has been observed under high pressure as a result of charge-transfer gap closing. Pressure-induced superconductivity emerges at 26GPa, where the charge-transfer gap fully closes, 3D electronic configuration forms and local spin fully collapses.

Zhang, Jun↗

In situ iron coating on nanocatalysts for efficient and durable oxygen evolution reaction

The oxygen evolution reaction (OER) is essential to many important energy conversion and storage systems. To achieve high-performance and low-cost OER electrocatalysts, great effort has been devoted to the development of noble-metal-free OER nanocatalysts. While nanostructured materials have been shown effective at improving the catalytic activity, the stability of the nanocatalyst has yet to be significantly improved. Furthermore, nanocatalyst syntheses are typically complex, limiting their practical application. Herein, we design a noble-metal-free nanocatalyst which has a CoFeP x core and an in situ Fe coating layer to enhance the material’s catalytic activity and durability for OER. We utilize the vapor pressure difference of Fe and Co at high temperature to synthesize the CoFeP x -Fe core-shell nanoparticles via a one-step high-temperature shock technique. The high-temperature method strongly anchors the CoFeP x nanoparticles onto a carbon substrate. The thin Fe shell layer (~2 nm) coated on the CoFeP x greatly enhances the durability of the CoFeP x catalyst without hampering its activity due to the geometric effect. This nanocatalyst with an in situ Fe shell demonstrates a successful nanocoating approach for fabricating catalytically active protection layers on catalysts with improved activity and durability.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Structural and electrical properties evolution in Ba{sub 1-x}Sr{sub x}RuO{sub 3} synthesized under high pressure

The 6H and 6M Ba{sub 1-x}Sr{sub x}RuO{sub 3} at x<=0.6 with the normal and distorted hexagonal BaTiO{sub 3} structures were synthesized by using high-pressure and high-temperature method. It is found that the unit cell volume deviates from Vegard's law between 0.3 and 0.4 for the solid solutions due to the increasing distortion degree of crystal structure. With the increasing x, the electrical resistivity at the same temperature is increasing. With the substitution of Sr for Ba ion, the 6H BaRuO{sub 3} transforms to a Fermi-liquid metal at x=0.25 from the primal non-Fermi-liquid metal, and then becomes a semiconductor at low temperature when x is larger than 0.4. - Graphical abstract: The 6H (x<=0.3) and 6M (0.4<=x<=0.6) Ba{sub 1-x}Sr{sub x}RuO{sub 3} solutions synthesized under high pressure adopt the normal and distorted hexagonal BaTiO{sub 3} structures, respectively.

36 MATERIALS SCIENCE↗

Structure, bonding, and magnetic response in two complex borides: Zr{sub 2}Fe{sub 1-{delta}}Ru{sub 5+{delta}}B2 and Zr{sub 2}Fe{sub 1-{delta}}(Ru{sub 1-x}Rh{sub x}){sub 5+{delta}}B2

Polycrystalline samples of two complex intermetallic borides Zr{sub 2}Fe{sub 1-{delta}}Ru{sub 5+{delta}}B2 and Zr{sub 2}Fe{sub 1-{delta}}(Ru{sub 1-x}Rh{sub x}){sub 5+{delta}}B2 ({delta}=ca. 0.10; x=0.20) were synthesized by high-temperature methods and characterized by single-crystal X-ray diffraction, energy dispersive spectroscopy, and magnetization measurements. Both structures are variants of Sc{sub 2}Fe(Ru{sub 1-x}Rh{sub x}){sub 5}B{sub 2} and crystallize in the space group P4/mbm (no. 127) with the Ti{sub 3}Co{sub 5}B{sub 2}-type structure. These structures contain single-atom, Fe-rich Fe/Ru or Fe/Ru/Rh chains along the c-axis with an interatomic metal-metal distance of 3.078(1) A, a feature which makes them viable for possible low-dimensional temperature-dependent magnetic behavior. Magnetization measurements indicated weak ferrimagnetic ordering with ordering temperatures ca. 230 K for both specimens. Tight-binding electronic structure calculations on a model 'Zr{sub 2}FeRu{sub 5}B{sub 2}' using LDA yielded a narrow peak at the Fermi level assigned to Fe-Fe antibonding interactions along the c-axis, a result that indicates an electronic instability toward ferromagnetic coupling along these chains. Spin-polarized calculations of various magnetic models were examined to identify possible magnetic ordering within and between the single-atom, Fe-rich chains. -- Graphical abstract: Zr{sub 2}FeRu{sub 5-x}Rh{sub x}B{sub 2} (x=0, 1) crystallizes with magnetic atoms forming chains which have been shown to order magnetically depending on the total valence electron count. Magnetic measurements and tight-binding electronic structure calculations are employed to investigate the ordering. Display Omitted

36 MATERIALS SCIENCE↗

The Y{sub 5−x}Mg{sub 24+x}(1.08(4)≤x≤1.30(1)) series and a ternary derivative Ce{sub 6.9}Y{sub 12.5(7)}Mg{sub 92.2}: A comparison of their crystal and electronic structures

The Y{sub 5−x}Mg{sub 24+x} series and a ternary derivative, Ce{sub 0.36}Y{sub 0.64(2)}Mg{sub 4.76}, have been synthesized using high-temperature methods and characterized by both powder and single crystal X-ray diffraction. The Y{sub 5−x}Mg{sub 24+x} series upon quenching from 580 °C crystallizes over the range 1.08(4)≤x≤1.30(1) in the cubic α-Mn structure type (I4{sup ¯}3m, Z=2, Pearson symbol cI58) with mixed occupancy of Y and Mg at the 8c site. As Mg content increases, the corresponding lattice parameter a increases from 11.2337(6) Å for Y{sub 3.92(4)}Mg{sub 25.08} to 11.256(2) Å for Y{sub 3.70(1)}Mg{sub 25.30}. Attempts to replace Y atoms with larger, isovalent Ce atoms yielded Ce{sub 6.9}Y{sub 12.5(7)}Mg{sub 92.2}(=Ce{sub 0.36}Y{sub 0.64(2)}Mg{sub 4.76}), which adopts a defect Sm{sub 11}Cd{sub 45} structure type (F4{sup ¯}3m, Z=8, Pearson symbol cF446.4), with a lattice parameter a=22.443(2) Å that is nearly twice larger than those of the Y{sub 5−x}Mg{sub 24+x} series. The complex crystal structure of this ternary derivative can be described as an ordered, body-centered cubic packing of four chemically and structurally distinctive “nested-polyhedra,” two 27-atom and two 29-atom, α-Mn units. Electronic structure calculations show nearly free electron like behavior, but with a distinctive pseudogap in the density of states curve for the ternary system. - Graphical abstract: Reported is the Mg-rich intermetallic compounds Y{sub 5−x}Mg{sub 24+x} series adopting the cubic α-Mn type structure and its complex ternary derivative Ce{sub 6.9}Y{sub 12.5}Mg{sub 92.2} crystallized in a defect Sm{sub 11}Cd{sub 45} type structure with a nearly twice larger lattice parameter than those of the Y{sub 5−x}Mg{sub 24+x} series. Electronic structure calculations show nearly free electron like behavior, but with a distinctive pseudogap in the density of states curve for the ternary system. Highlights: • The Y{sub 5−x}Mg{sub 24+x} series and Ce{sub 6.9}Y{sub 12.5}Mg{sub 92.2} have been synthesized. • Ce{sub 6.9}Y{sub 12.5}Mg{sub 92.2} is seen as a body-centered cubic packing of “nested-polyhedra”. • Electronic structures show nearly free electron like behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Γ-brasses in the Mn-Zn system: An experimental and computational study

Here, the synthesis and characterization of Ni 2 Zn 11 -type γ-brasses with composition Mn 2+x Zn 11–x (x = 0.06–0.60) are reported. The synthesis follows standard high temperature methods and characterization by single crystal X-ray diffraction (SCXRD) and powder X-ray Diffraction (PXRD) techniques as well as Energy Dispersive Spectroscopy (EDS). First principles electronic structure calculations showed preferential heteroatomic Mn–Zn bonding and repulsive effects of Zn–Zn 3 d –3 d orbital overlap that influence the metal atom distribution in the structure. Local bonding environments and the relationship of Mn 2+x Zn 11-x to other γ-brasses containing 3 d metals such as PdCoZn 11 and Ni 2 Zn 11 are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cold Seeded Epitaxy and Flexomagnetism in GdAuGe Membranes Exfoliated From Graphene/Ge(111)

Remote and van der Waals epitaxy are promising approaches for synthesizing single crystalline membranes for flexible electronics and discovery of new properties via extreme strain; however, a fundamental challenge is that most materials do not wet the graphene surface. We develop a cold seed approach for synthesizing smooth intermetallic films on graphene that can be exfoliated to form few nanometer thick single crystalline membranes. Our seeded GdAuGe films have narrow X-ray rocking curve widths of 9–24 arc seconds, which is 2 orders of magnitude lower than their counterparts grown by typical high temperature methods, and have atomically sharp interfaces observed by transmission electron microscopy. Upon exfoliation and rippling, strain gradients in GdAuGe membranes induce an antiferromagnetic to ferri/ferromagnetic transition. Finally, our smooth, ultrathin membranes provide a clean platform for discovering new flexomagnetic effects in quantum materials.

36 MATERIALS SCIENCE↗

Large spontaneous polarization in polar perovskites of PbTiO 3 -Bi(Zn 1/2 Ti 1/2 )O 3

PbTiO 3 –Bi(Zn 1/2 Ti 1/2 )O 3 is considered to be a promising high-ferroelectric performance material in the Pb/Bi-based perovskite family. In the present study, a whole set of (1 – x )PbTiO 3 – x Bi(Zn 1/2 Ti 1/2 )O 3 (0 ≤ x ≤ 1) solid solutions have been prepared by the conventional solid-state and high-pressure vs. high-temperature methods. The effect of Bi(Zn 1/2 Ti 1/2 )O 3 on the crystal structure has been investigated by synchrotron X-ray powder diffraction. Unlike most PbTiO 3 -based perovskites, the present system exhibits a continuously enhanced tetragonality (c/a) and large spontaneous polarization (PS) properties. The enhanced c/a is ascribed to the large spontaneous polarization displacements induced by the strong Pb/Bi–O hybridization and coupling interactions between Ti/Zn and Pb/Bi cations, which can be evidenced from the lattice dynamics study and first-principles calculations. Accordingly, the T C ( i.e., x = 0.5) is expected to be approximately 1000 °C if its perovskite structure can be stabilized. In conclusion, the present study provides a route to obtain large-PS in PbTiO 3 -based ferroelectric materials by introducing isostructural perovskites with strong polarity.

36 MATERIALS SCIENCE↗

Target development for {sup 67}Cu, {sup 82}Sr radionuclide production at the RIC-80 facility

A high-current cyclotron C-80 capable of producing 40–80 MeV proton beams with a current of up to 200 μA has been constructed and commissioned at PNPI (Petersburg Nuclear Physics Institute). One of the main goals of cyclotron C-80 is the production of a wide spectrum of medical radionuclides for diagnostics and therapy. To date, the project development of a radioisotope facility RIC-80 (radioisotopes at cyclotron C-80) has been completed. The feature of the project is the use of a mass-separator combined with the ion-target device for obtaining ion beams of radioisotopes with a high purity of separation that is especially important for medical applications. The first results of а new high-temperature method for extracting {sup 82}Sr and {sup 67}Cu radioisotopes from irradiated targets have been presented.

07 ISOTOPE AND RADIATION SOURCES↗

Growth of Ambient Induced Surface Impurity Species on Layered Positive Electrode Materials and Impact on Electrochemical Performance

Surface impurity species, most notably Li 2 CO 3 , that develop on layered oxide positive electrode materials with atmospheric aging have been reported to be highly detrimental to the subsequent electrochemical performance. LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA) was used as a model layered oxide compound to evaluate the growth and subsequent electrochemical impact of H 2 O, LiHCO 3 , LiOH and Li 2 CO 3 . Methodical high temperature annealing enabled the systematic removal of each impurity specie, thus permitting the determination of each specie's individual effect on the host material's electrochemical performance. Extensive cycling of exposed and annealed materials emphasized the cycle life degradation and capacity loss induced by each impurity, while rate capability measurements correlated the electrode impedance to the impurity species present. Based on these characterization results, this work attempts to clarify decades of ambiguity over the growth mechanisms and the electrochemical impact of the specific surface impurity species formed during powder storage in various environments.

25 ENERGY STORAGE↗

Reaction kinetics between fiber and matrix

Interdiffusion and interdiffusion controlled intermediate phase formation in metal matrix composites can be of interest for the prolonged application of these systems at high temperatures. Methods are discussed that address the kinetics of interdiffusion in systems that exhibit solid solution intermixing or the formation of a third intermediate phase at the fiber/matrix interface, or both. The tungsten fiber reinforced niobium and tungsten fiber reinforced superalloy systems are employed as model systems for experimentation and discussion. In an effort to impede interdiffusion, the concept of ion implanted diffusion barriers have been examined. Preliminary results on the feasibility and effectiveness of ion implanted diffusion barriers are presented.

Kopp, M. W.↗

On the Use of Accelerated Aging Methods for Screening High Temperature Polymeric Composite Materials

A rational approach to the problem of accelerated testing of high temperature polymeric composites is discussed. The methods provided are considered tools useful in the screening of new materials systems for long-term application to extreme environments that include elevated temperature, moisture, oxygen, and mechanical load. The need for reproducible mechanisms, indicator properties, and real-time data are outlined as well as the methodologies for specific aging mechanisms.

Gates, Thomas S.↗

High-Temperature Mechanical Tensile Testing of Unidirectional Sic/Sic Composites Using A Versatile Lamp Furnace

Silicon carbide (SiC) based ceramic matrix composites (CMCs) are of interest for high-temperature structural applications, including use in turbine engine components. To understand damage mechanisms and predict durability of these systems, in-depth knowledge of their behavior at ambient and high temperatures is necessary. A method for high temperature testing of SiC/SiC minicomposite specimens up to 1500oC in both tensile fast fracture and creep conditions to investigate their thermomechanical behavior will be presented. This method utilizes a novel radiation heat furnace, equipped with infrared lamps with ellipsoidal reflectors, to heat the specimen at the furnace center in user-defined atmospheres. The housing structure of the lamps allows for observation of the specimen during testing using optical methods and for conducting other experimental studies. The goal is to employ nondestructive health monitoring techniques in-situ, including acoustic emission (AE), electrical resistance (ER), and digital image correlation (DIC) to evaluate damage initiation and evolution in the minicomposite specimens during tensile testing. Results from mechanical testing and nondestructive techniques will be presented. Electron microscopy and X-ray micro-computed tomography were used to further characterize specimen damage after testing.

Aeronautics↗

Hybrid CMOS-MEMS devices adapted for high-temperature operation and method for their manufacture

A silicon carbide based MOS integrated circuit is monolithically integrated with a suspended piezoelectric aluminum nitride member to form a high-temperature-capable hybrid MEMS-over-MOS structure. In the integrated structure, a post-MOS passivation layer of silicon carbide is deposited over the MOS passivation and overlain by a structural layer of the MEMS device. Electrical contact to refractory metal conductors of the MOS integrated circuit is provided by tungsten vias that are formed so as to pass vertically through the structural layer and the post-MOS passivation layer.

42 ENGINEERING↗