Search NASA⌕ Search

SEARCH · Search NASA

Results for “High salinity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Electrocoagulation of high-salinity produced water: lessons learned from its early applications in unconventional reservoir plays

Ample research has demonstrated that electrocoagulation is a versatile technology capable of facilitating the removal of a wide range of physical, biological, organic, and inorganic constituents such as suspended solids, turbidity, bacteria, viruses, oil and grease, organic carbon (including chemical and biological oxygen demand), silica, fluoride, and so on. Despite its purported advantages and extensive lab-scale evaluations, it has not yet been widely adopted for water and wastewater treatment and reuse at commercial scale. This is symptomatic of a chasm between its technological capabilities on one hand and field performance and reputation on the other. Herein, we opine as to why this might be the case using our collective experiences with the oil and gas industry as an exemplar. In this study, we highlight scientific, technological, engineering, and business issues that need to be addressed to realize the full potential of this promising technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fluorographite-co-polydimethylsiloxane coated polyvinylidene-fluoride membrane for desalination of highly saline water with humic acid in direct contact membrane distillation

Highlights: • Surface modifications by FGi particles with PDMS binder of PVDF microporous membranes shown improvement in DCMD. • LEP with DI water & performance of M2-M4 modified membranes in DCMD was enhanced with 1M NaCl & 10 ppm HA feed solution. • Amphiphobicity was evidenced by CA with low surface tension liquids upto 38 dyne/cm as well as with canola oil. • EDX analysis proved enhancement in FC ratio and membrane surface analysis lead to understand enhanced performance in DCMD. Membranes with amphiphobic properties are crucial for desalination of concentrated saline water with organic foulant by membrane distillation. In this research, we coated Fluorographite (FGi) particles on polyvinylidene-fluoride (PVDF) flat sheet membranes with 0.8% v/v polydimethylsiloxane (PDMS) as binder by filtration coating method. We evaluated its amphiphobicity via contact angles which were observed by DI water, canola oil and organic solutions as mimicking for oleophobicity. Surface modifications by FGi particles on the surface of membranes was introduced with PDMS binder which brought bifunctionality of amphiphobicity to enhance hydrophobicity and oleophobicity. We also investigated performance of coated membranes in direct contact membrane distillation (DCMD) with 1 molar concentrated NaCl solution along with humic acid being organic foulant and compared with virgin membrane (M1 membrane) and Liquid entry pressure (LEP) was also evaluated. LEP was measured by dynamic method which shown considerable improvement in coated membranes. M3 membrane showed overall better performance in terms of salt rejection higher than 99.87% and flux as compared to M1 membrane. Furthermore, the evaluation of surface characterizations was done by FESEM with EDX, AFM and FTIR. Surface morphology confirmed the coating of FGi on membrane surface while EDX evidenced increase in atomic percent of fluorine in turn F:C ratio.

54 ENVIRONMENTAL SCIENCES↗

Oil effect on CO 2 foam stabilized by a switchable amine surfactant at high temperature and high salinity

Despite the possible detrimental effect of oil on foam displacement processes in CO 2 EOR the effect of oil on dense CO 2 foams has received little attention relative to air foams or low density CO 2 foams. Herein, the effect of both a first contact miscible hydrocarbon (dodecane) and crude oil on CO 2 /water (C/W) foams generated by a switchable surfactant, C 12–14 N(EO) 2 was examined at dense CO 2 conditions at temperatures up to 120 °C (393 K) and 3400 psia (23 MPa). Upon increasing the fractional flow of dodecane, a gradual decrease in foam viscosity was observed as the foam becomes unstable. Since only two phases are present, traditional destabilization mechanisms for three phase oil/gas/water systems based on the entering and spreading are invalid. Therefore, an alternative mechanism is suggested whereby added dodecane strengthen the surfactant tail interactions with the nonaqueous phase (mixture of CO 2 and dodecane) to shift the hydrophilic-CO 2 philic balance (HCB) towards an unstable region. This mechanism is supported by a decrease of the CO 2 –water interfacial tension from ~5 mN/m to 0.5 mN/m for dodecane–water systems at 120 °C and 3400 psia. The effect of crude oil was more profound than for dodecane, whereby rapid destabilization of foam occurred at an oil fractional flow as low as 0.2. In this case, the immiscible portion of the crude oil can enter and spread at the lamellae to destabilize the foam as is evident in positive entering and spreading coefficients. Also, other foam destabilizing parameters such as temperature and capillary pressure were studied in the presence of oil and the results were consistent with those in the absence of oil.

nuclear (including radiation effects), carbon sequ↗

Increasing Gas Hydrate Formation Temperature for Desalination of High Salinity Produced Water with Secondary Guests

We suggest a new gas hydrate-based desalination process using water-immiscible hydrate formers; cyclopentane (CP) and cyclohexane (CH) as secondary hydrate guests to alleviate temperature requirements for hydrate formation. The hydrate formation reactions were carried out in an isobaric condition of 3.1 MPa to find the upper temperature limit of CO2 hydrate formation. Simulated produced water (8.95 wt % salinity) mixed with the hydrate formers shows an increased upper temperature limit from -2 °C for simple CO2 hydrate to 16 and 7 °C for double (CO2 + CP) and (CO2 + CH) hydrates, respectively. The resulting conversion rate to double hydrate turned out to be similar to that with simple CO2 hydrate at the upper temperature limit. Hydrate formation rates (Rf) for the double hydrates with CP and CH are shown to be 22 and 16 times higher, respectively, than that of the simple CO2 hydrate at the upper temperature limit. Such mild hydrate formation temperature and fast formation kinetics indicate increased energy efficiency of the double hydrate system for the desalination process. Dissociated water from the hydrates shows greater than 90% salt removal efficiency for the hydrates with the secondary guests, which is also improved from about 70% salt removal efficiency for the simple hydrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An interval of high salinity in ancient Gale crater lake on Mars

Precipitated minerals, including salts, are primary tracers of atmospheric conditions and water chemistry in lake basins. Ongoing in situ exploration by the Curiosity rover of Hesperian (around 3.3–3.7 Gyr old) sedimentary rocks within Gale crater on Mars has revealed clay-bearing fluvio-lacustrine deposits with sporadic occurrences of sulfate minerals, primarily as late-stage diagenetic veins and concretions. In this work, we report bulk enrichments, disseminated in the bedrock, of 30–50 wt% calcium sulfate intermittently over about 150 m of stratigraphy, and of 26–36 wt% hydrated magnesium sulfate within a thinner section of strata. We use geochemical analysis, primarily from the ChemCam laser-induced breakdown spectrometer, combined with results from other rover instruments, to characterize the enrichments and their lithology. The deposits are consistent with early diagenetic, pre-compaction salt precipitation from brines concentrated by evaporation, including magnesium sulfate-rich brines from extreme evaporative concentration. This saline interval represents a substantial hydrological perturbation of the lake basin, which may reflect variations in Mars’ obliquity and orbital parameters. Our findings support stepwise changes in Martian climate during the Hesperian, leading to more arid and sulfate-dominated environments as previously inferred from orbital observations.

58 GEOSCIENCES↗

Energy and exergy analysis of a novel multiple-effect vapor chamber distillation system for high-salinity wastewater treatment

A novel modular thermally-driven multiple-effect vapor chamber distillation (MVCD) system is presented for compact and portable desalination applications. The MVCD system consists of several vapor chambers connected in series with the condenser section of the upstream vapor chambers serving as the evaporator section of the following effect. A heat transfer model accounting for the major thermal resistances was developed to predict the heat transfer and distilled water production rates. A mass transfer analysis was performed to evaluate the effect of the accumulation of the non-condensable gasses within the chambers. An exergy analysis was also conducted to quantify the efficiency of the system from the viewpoint of the second law of thermodynamics. It was found that for a fixed number of effects, increasing the hot-end temperature increased the distillation rate and decreased the second law efficiency. On the other hand, increasing the number of effects at a fixed hot-end temperature resulted in increased distillation rate and second law efficiency. The increased salinity of the feed water resulted in smaller distillation rates and greater second law efficiency. For all the cases, it was found that sensible heat recovery from the discharging fluids could improve the gained output ratio (GOR) and the second law efficiency by about 10%. Here, the quantitatively, at a hot-end temperature of 70°C, feed water salinity of 35 ppt and recovery ratio of 36%, the MVCD system with six effects and energy recovery from the discharging fluids yielded a GOR of 5.0 and a second law efficiency of 3.8%.

42 ENGINEERING↗