Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Electrical properties of methane hydrate + sediment mixtures: The σ of CH 4 Hydrate + Sediment

Knowledge of the electrical properties of multicomponent systems with gas hydrate, sediments, and pore water is needed to help relate electromagnetic (EM) measurements to specific gas hydrate concentration and distribution patterns in nature. We built a pressure cell capable of measuring in situ electrical properties of multicomponent systems such that the effects of individual components and mixing relations can be assessed. We first established the temperature-dependent electrical conductivity (σ) of pure, single-phase methane hydrate to be ~5 orders of magnitude lower than seawater, a substantial contrast that can help differentiate hydrate deposits from significantly more conductive water-saturated sediments in EM field surveys. We report σ measurements of two-component systems in which methane hydrate is mixed with variable amounts of quartz sand or glass beads. Sand by itself has low σ but is found to increase the overall σ of mixtures with well-connected methane hydrate. Alternatively, the overall σ decreases when sand concentrations are high enough to cause gas hydrate to be poorly connected, indicating that hydrate grains provide the primary conduction path. Our measurements suggest that impurities from sand induce chemical interactions and/or doping effects that result in higher electrical conductivity with lower temperature dependence. Finally, these results can be used in the modeling of massive or two-phase gas-hydrate-bearing systems devoid of conductive pore water. Further experiments that include a free water phase are the necessary next steps toward developing complex models relevant to most natural systems.

03 NATURAL GAS↗

The effect of hydrate saturation on water retention curves in hydrate‐bearing sediments

Abstract The experimental measurement of water retention curve in hydrate‐bearing sediments is critically important to understand the behavior of hydrate dissociation and gas production. In this study, tetrahydrofuran (THF) is selected as hydrate former. The pore habit of THF hydrates is investigated by visual observation in a transparent micromodel. It is confirmed that THF hydrates are not wetting phase on the quartz surface of the micromodel and occupy either an entire pore or part of pore space resulting in change in pore size distribution. And the measurement of water retention curves in THF hydrate‐bearing sediments with hydrate saturation ranging from S h = 0 to S h = 0.7 is conducted for excess water condition. The experimental results show that the gas entry pressure and the capillary pressure increase with increasing hydrate saturation. Based on the experimental results, fitting parameters for van Genuchten equation are suggested for different hydrate saturation conditions.

Mahabadi, Nariman↗

Impact of hydrate saturation on water permeability in hydrate-bearing sediments

Permeability of the hydrate-bearing sediments vitally affects the hydrate dissociation process as well as the rate and efficiency of gas production. Reported permeability values are observed to be widely are very scattered owing to the dependence on multiple factors such as experimental conditions and test procedures. It is critical that the permeability is measured accurately to enable prediction of long-term gas production using numerical simulation for an economic development of hydrate-bearing reservoirs. In this study, the tetrahydrofuran (THF) hydrates that exhibit pore habits of the pore-filling pattern are formed in sediments, and the water permeability is quantified as a function of hydrate saturation. The results reveal that a decrease in the permeability for an increase in the hydrate saturation. Based on the measured values that are bounded by Kozeny grain-coating and pore-filling models, the fitting parameters of the empirical permeability models are indicated for use in numerical simulation of long-term hydrate dissociation. Wave velocity measurements reveal pore habits of pore-filling pattern of THF hydrates in the sediments with S h < 0.5, and a gradual transition to patchy and load-bearing pore-habits when S h > 0.6. The numerical simulation results obtained using the complementary pore-network model suggest that the THF hydrates in the sediments may form in small clusters with an average patch size of ~4 pores.

58 GEOSCIENCES↗

Electrical Properties of Carbon Dioxide Hydrate: Implications for Monitoring CO 2 in the Gas Hydrate Stability Zone

CO 2 and CH 4 clathrate hydrates are of keen interest for energy and carbon cycle considerations. While both typically form on Earth as cubic structure I (sI), we find that pure CO 2 hydrate exhibits over an order of magnitude higher electrical conductivity ( σ ) than pure CH 4 hydrate at geologically relevant temperatures. In this study, the conductivity was obtained from frequency-dependent impedance ( Z ) measurements made on polycrystalline CO 2 hydrate (CO 2 ·6.0 ± 0.2H 2 O by methods here) with 25% gas-filled porosity, compared with CH 4 hydrate (CH 4 ·5.9H 2 O) formed and measured in the same apparatus and exhibiting closely matching grain characteristics. The conductivity of CO 2 hydrate is 6.5 × 10 –4 S/m at 273K with an activation energy ( E a ) of 46.5 kJ/mol at 260–281 K, compared with ~5 × 10 –5 S/m and 34.8 kJ/m for CH 4 hydrate. Equivalent circuit modeling indicates that different pathways govern conduction in CO 2 versus CH 4 hydrate. Results show promise for use of electromagnetic methods in monitoring CO 2 hydrate formation in certain natural settings or in CO 2 /CH 4 exchange efforts.

58 GEOSCIENCES↗

Hydration behavior of magnesium potassium phosphate cement and stability analysis of its hydration products through thermodynamic modeling

Magnesium potassium phosphate cement (MKPC) is normally applied in civil engineering because of its short setting time and superior mechanical properties. This study investigates the hydration behavior and hydration products of MKPC influenced by molar ratio between magnesia and phosphate (M/P ratio) through thermodynamic method. Results show that the composition of ultimate hydration products are controlled by concentration of KH{sub 2}PO{sub 4} and MgO, activity of water and pH value of solution. When M/P ratio is lower than 0.64, the hydration product is MgHPO{sub 4}·3H{sub 2}O; When M/P ratio is between 0.64 and 0.67, the hydration products are MgHPO{sub 4}·3H{sub 2}O and Mg{sub 2}KH(PO{sub 4}){sub 2}·15H{sub 2}O. When M/P ratio is between 0.67 and 1.00, hydration products are Mg{sub 2}KH(PO{sub 4}){sub 2}·15H{sub 2}O and KMgPO{sub 4}·6H{sub 2}O; When M/P ratio is higher than 1.00, the hydration product is KMgPO{sub 4}·6H{sub 2}O together with unreacted MgO. This study also investigated the effect of additives, namely B(OH){sub 3}, H{sub 3}PO{sub 4}, K{sub 2}HPO{sub 4} and KH{sub 2}PO{sub 4}. - Highlights: • A database particularly for MKPC system at 25°C, 0.1 MPa was established and verified. • The pH value corresponding to specific M/P ratio in MKPC system is successfully predicted at 25°C, 0.1 MPa. • The composition of hydration products influenced by M/P ratio and some additives is successfully predicted at 25°C, 0.1 MPa.

36 MATERIALS SCIENCE↗

India National Gas Hydrate Program Expedition 02 Summary of Scientific Results: Numerical Simulation of Reservoir Response to Depressurization

The India National Gas Hydrate Program Expedition 02 (NGHP-02) discovered gas hydrate at high saturation in sand reservoirs at several sites in the deepwater Bay of Bengal. To assess the potential response of those deposits to scientific depressurization experiments, comprehensive geologic models were constructed to enable numerical simulation for two sites. Both sites (NGHP-02-09 and NGHP-02-16) feature thick sequences of thinly-interbedded reservoir and non-reservoir facies at sub-seafloor depths less than 300m and sub-sea depths of 2400m or more. These settings pose significant challenges to current modeling capabilities. First, the thinly-interbedded reservoir architecture complicates the determination of basic reservoir parameters from both log and core data due to measurement resolution issues. Secondly, the fine scale variation in sediment properties imparts great contrasts in key parameters over very short distances, creating high gradients at multiple scales and varying orientations that necessitate careful design of high-definition simulation grids. Thirdly, the deposits include internal sources of water, as well as a range of complex boundary conditions, including variable permeability within the overlying mud-rich “seals,” that complicate reservoir depressurization. Lastly, because of the unique combination of great water depth and relatively shallow sub-seafloor depth: models designed to maximize the dissociation rate impose large pressure drawdowns on relatively low-strength sediments. This condition renders the proper evaluation and integration of the geomechanical response to hydrate dissociation critical. In this report, we review the history of gas hydrate reservoir simulation, discuss methods for creating geologic input models, and summarize the key findings and implications of the collaborative NGHP-02 numerical simulation effort. Together, the studies confirm the viability of the modeled accumulations for scientific testing and identify key challenges related to the selection of specific test sites and the design of test wells.

Boswell, Ray↗

Gas Production from Hot Water Circulation through Hydraulic Fractures in Methane Hydrate-Bearing Sediments: THC-Coupled Simulation of Production Mechanisms

Methane hydrates, widely found in permafrost and deep marine sediments, have great potential as a future energy 6 source. Conventional production schemes perform poorly for challenging hydrate reservoirs with low permeability. We propose an 7 efficient production scheme by combining hydraulic fracturing from horizontal wells and hot water circulation through fractures. A 8 fully coupled thermo-hydro-chemical (THC) model is developed to simulate the key physical processes during gas production from 9 a hydrate reservoir representative of typical geological settings in Shenhu, South China Sea. We found that the gas production 10 process has two distinct stages divided by thermal breakthrough: a relatively short prebreakthrough stage and a postbreakthrough 11 stage yielding stable gas production. Heat advection along and near the hydraulic fracture dominates the prebreakthrough stage, 12 whereas conduction-driven thermal recovery in the volume around fractures dominates the postbreakthrough stage. We identified 13 that the steady-state injection temperature has a strong effect on the performance of the proposed scheme while the fluid mass 14 circulation rate has a moderate impact beyond a threshold. The proposed scheme proves to be efficient and robust over a range of 15 reservoir conditions with respect to initial hydrate saturation and intrinsic permeability, including their spatial heterogeneities, 16 thereby offering a promising solution for challenging reservoir conditions.

gas hydrate, fracture flow, gas production, numeri↗

Some thermodynamical aspects of protein hydration water

We study by means of nuclear magnetic resonance the self-diffusion of protein hydration water at different hydration levels across a large temperature range that includes the deeply supercooled regime. Starting with a single hydration shell (h = 0.3), we consider different hydrations up to h = 0.65. Our experimental evidence indicates that two phenomena play a significant role in the dynamics of protein hydration water: (i) the measured fragile-to-strong dynamic crossover temperature is unaffected by the hydration level and (ii) the first hydration shell remains liquid at all hydrations, even at the lowest temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Submarine landslides triggered by destabilization of high-saturation hydrate anomalies: LANDSLIDES CAUSED BY HYDRATE ANOMALIES

Submarine landslides occur along continental margins at depths that often intersect the gas hydrate stability zone, prompting suggestions that slope stability may be affected by perturbations that arise from changes in hydrate stability. Here we develop a numerical model to identify the conditions under which the destabilization of hydrates results in slope failure. Specifically, we focus on high-saturation hydrate anomalies at fine-grained to coarse-grained stratigraphic boundaries that can transmit bridging stresses that decrease the effective stress at sediment contacts and disrupt normal sediment consolidation. We evaluate slope stability before and after hydrate destabilization. Hydrate anomalies act to significantly increase the overall slope stability due to large increases in effective cohesion. However, when hydrate anomalies destabilize there is a loss of cohesion and increase in effective stress that causes the sediment grains to rapidly consolidate and generate pore pressures that can either trigger immediate slope failure or weaken the surrounding sediment until the pore pressure diffuses away. In cases where failure does not occur, the sediment can remain weakened for months. In cases where failure does occur, we quantify landslide dynamics using a rate and state frictional model and find that landslides can display either slow or dynamic (i.e., catastrophic) motion depending on the rate-dependent properties, size of the stress perturbation, and the size of the slip patch relative to a critical nucleation length scale. Our results illustrate the fundamental mechanisms through which the destabilization of gas hydrates can pose a significant geohazard.

58 GEOSCIENCES↗

A preliminary study of the gas hydrate stability zone in a gas hydrate potential region of China

Abstract Due to its significance for gas hydrate accumulation, the gas hydrate stability zone (GHSZ) is an essential condition for successful gas hydrate exploration and is usually controlled by three main factors: gas components, geothermal gradient, and permafrost thickness. Based on the core and conventional log data of gas hydrate potential region, the CSMHYD program was adopted to simulate the influences of above three factors on the thickness of the GHSZ. When the gas components of the gas hydrate were CH 4 , C 2 H 6 , and C 3 H 8 , with the CH 4 percentage ranging from 50% to 100%, the average GHSZ thickness can reach 1000 m according to the forward simulation results. When the gas hydrate was composed of CH 4 and one of C 2 H 6 , C 3 H 8 , H 2 S, and CO 2 , the influence order of the above four gases on the thickness of GHSZ is as follows: H 2 S > C 2 H 6 > C 3 H 8 > CO 2 . Under the gas components of 90% CH 4 , 5% C 2 H 6, and 5% C 3 H 8 , the thickness of GHSZ decreased rapidly as the geothermal gradient increased following an exponential relation with a correlation of 99.92% and increased slowly as permafrost thickness increased following a linear relation with a correlation of 99.9%. In addition, the thickness of a gas hydrate favorable reservoir was determined by comprehensive log methods as 500 m. We conclude that a reservoir within 500 m below the permafrost layer is favorable for gas hydrate reservoir formation.

Xiao, Kun↗

Influence of Countercation Hydration Enthalpies on the Formation of Molecular Complexes: A Thorium–Nitrate Example

The influence of countercations (A(n+)) in directing the composition of monomeric metalligand (ML) complexes that precipitate from solution are often overlooked despite the wide usage of A(n+) in materials synthesis. Herein, we describe a correlation between the composition of ML complexes and A(+) hydration enthalpies found for two related series of thorium (Th)-nitrate molecular compounds obtained by evaporating acidic aqueous Th-nitrate solutions in the presence of A(+) counterions. Analyses of their chemical composition and solid-state structures demonstrate that A(+) not only affects the overall solid-state packing of the Th-nitrato complexes but also influences the composition of the Th-nitrato monomeric anions themselves. Trends in composition and structure are found to correlate with A(+) hydration enthalpies, such that the A(+) with smaller hydration enthalpies associate with less hydrated and more anionic Th-nitrato complexes. This perspective, broader than the general assumption of size and charge as the dominant influence of A(n+), opens a new avenue for the design and synthesis of targeted metal-ligand complexes.

Jin, Geng Bang↗

Benchmarking the performance of density functional theory and point charge force fields in their description of sI methane hydrate against diffusion Monte Carlo

High quality reference data from diffusion Monte Carlo calculations are presented for bulk sI methane hydrate, a complex crystal exhibiting both hydrogen-bond and dispersion dominated interactions. The performance of some commonly used exchange-correlation functionals and all-atom point charge force fields is evaluated. Our results show that none of the exchange-correlation functionals tested are sufficient to describe both the energetics and the structure of methane hydrate accurately, while the point charge force fields perform badly in their description of the cohesive energy but fair well for the dissociation energetics. By comparing to ice I{sub h}, we show that a good prediction of the volume and cohesive energies for the hydrate relies primarily on an accurate description of the hydrogen bonded water framework, but that to correctly predict stability of the hydrate with respect to dissociation to ice I{sub h} and methane gas, accuracy in the water-methane interaction is also required. Our results highlight the difficulty that density functional theory faces in describing both the hydrogen bonded water framework and the dispersion bound methane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methane Hydrate Field Program. Development of a Scientific Plan for a Methane Hydrate-Focused Marine Drilling, Logging and Coring Program

This topical report represents a pathway toward better understanding of the impact of marine methane hydrates on safety and seafloor stability and future collection of data that can be used by scientists, engineers, managers and planners to study climate change and to assess the feasibility of marine methane hydrate as a potential future energy resource. Our understanding of the occurrence, distribution and characteristics of marine methane hydrates is incomplete; therefore, research must continue to expand if methane hydrates are to be used as a future energy source. Exploring basins with methane hydrates has been occurring for over 30 years, but these efforts have been episodic in nature. To further our understanding, these efforts must be more regular and employ new techniques to capture more data. This plan identifies incomplete areas of methane hydrate research and offers solutions by systematically reviewing known methane hydrate “Science Challenges” and linking them with “Technical Challenges” and potential field program locations.

58 GEOSCIENCES↗

Hydration of MgO/SiO{sub 2} and Portland cement mixtures: A structural investigation of the hydrated phases by means of X-ray diffraction and solid state NMR spectroscopy

The phases formed during the hydration of several MgO/SiO{sub 2} and Portland cement mixtures were investigated by performing X-ray diffraction and {sup 29}Si and {sup 27}Al solid state NMR experiments on samples hydrated for 1, 7 and 28 days. The structural properties and relative amount of magnesium silicate hydrate (M-S-H) and calcium silicate hydrate (C-S-H) gels, which form as separate phases, were found to significantly depend on the initial composition of the mixtures. Faster hydration kinetics was observed for all mixtures with respect to the “pure” MgO/SiO{sub 2} and Portland cement samples, pH and excess of silica playing a major role. Moreover, the addition of the MgO/SiO{sub 2} mixture to Portland cement affects the formation of aluminum-containing hydrated phases.

36 MATERIALS SCIENCE↗

Suppression of the dynamic transition in surface water at low hydration levels: A study of water on rutile.

Our quasielastic neutron-scattering experiments and molecular-dynamics simulations probing surface water on rutile (TiO{sub 2}) have demonstrated that a sufficiently high hydration level is a prerequisite for the temperature-dependent crossover in the nanosecond dynamics of hydration water. Below the monolayer coverage of mobile surface water, a weak temperature dependence of the relaxation times with no apparent crossover is observed. We associate the dynamic crossover with interlayer jumps of the mobile water molecules, which become possible only at a sufficiently high hydration level.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulation of Gas Production from Multilayered Hydrate-Bearing Media with Fully Coupled Flow, Thermal, Chemical and Geomechanical Processes Using TOUGH + Millstone. Part 1: Numerical Modeling of Hydrates

TOUGH + Millstone has been developed for the analysis of coupled flow, thermal and geomechanical processes associated with the formation and/or dissociation of CH4-hydrates in geological media. It is composed of two constituent codes: (a) a significantly enhanced version of the TOUGH + HYDRATE simulator, V2.0, that accounts for all known flow, physical, thermodynamic and chemical processes associated with the behavior of hydrate-bearing systems undergoing changes and includes the most recent advances in the description of the system properties, coupled seamlessly with (b) Millstone V1.0, a new code that addresses the conceptual, computational and mathematical shortcomings of earlier codes used to describe the geomechanical response of these systems. The capabilities of TOUGH + Millstone are demonstrated in the simulation and analysis of the system flow, thermal and geomechanical behavior during gas production from a realistic complex offshore hydrate deposit. In the first paper of this series, we discuss the physics underlying the T + H hydrate simulator, the constitutive relationships describing the physical, chemical (equilibrium and kinetic) and thermal processes, the states of the CH 4 + H 2 O system and the sources of critically important data, as well as the mathematical approaches used for the development of the of mass and energy balance equations and their solution. Finally, we provide verification examples of the hydrate code against numerical results from the simulation of laboratory and field experiments.

58 GEOSCIENCES↗

Thermodynamic modeling of hydrated white Portland cement–metakaolin–limestone blends utilizing hydration kinetics from {sup 29}Si MAS NMR spectroscopy

Hydration kinetics for the principal phases of Portland cement blends have been incorporated in thermodynamic modeling (GEMS package), utilizing degrees of hydration from {sup 29}Si MAS NMR. An empirical relationship for the reaction of these phases is established which includes three variable parameters that all can be estimated from the degrees of hydration. This approach is compared with thermodynamic equilibrium modeling (full hydration) for white Portland cement–metakaolin (0–30 wt.%) blends and for ternary blends of white Portland cement (65 wt.%)–metakaolin–limestone. The predicted phase assemblages have been compared with the phases identified by XRD, {sup 27}Al and {sup 29}Si MAS NMR which reveals that the incorporation of hydration kinetics improves the agreement between modeling and experiments. The results show also that the formation of strätlingite depends critically on the quantity of charge-balancing anions in the AFm phases, especially carbonate and sulfate anions, and on the degree of hydration for metakaolin.

36 MATERIALS SCIENCE↗