SEARCH · Search NASA

Results for “Hydrazines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

49 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Electrochemical Reductive N-Methylation with CO 2 Enabled by a Molecular Catalyst

The development of benign methylation reactions utilizing CO 2 as a one-carbon building block would enable a more sustainable chemical industry. Electrochemical CO 2 reduction has been extensively studied, but its application for reductive methylation reactions remains out of the scope of current electrocatalysis. Here, in this work, we report the first electrochemical reductive N-methylation reaction with CO 2 and demonstrate its compatibility with amines, hydroxylamines, and hydrazine. Catalyzed by cobalt phthalocyanine molecules supported on carbon nanotubes, the N-methylation reaction proceeds in aqueous media via the chemical condensation of an electrophilic carbon intermediate, proposed to be adsorbed or near-electrode formaldehyde formed from the four-electron reduction of CO 2 , with nucleophilic nitrogenous reactants and subsequent reduction. By comparing various amines, we discover that the nucleophilicity of the amine reactant is a descriptor for the C-N coupling efficacy. We extend the scope of the reaction to be compatible with cheap and abundant nitro-compounds by developing a cascade reduction process in which CO 2 and nitro-compounds are reduced concurrently to yield N-methyl amines with high mono-methylation selectivity via the overall transfer of 12 electrons and 12 protons.

amines↗

DOE OSTI2025

Ammonia Synthesis under Ambient Conditions: Insights into Water–Nitrogen–Magnetite Interfaces

New routes for transforming nitrogen into ammonia at ambient conditions would be a milestone toward an energy efficient and economically attractive production route in comparison to the traditional Haber-Bosch process. Recently, the synthesis of ammonia from water and nitrogen at room temperature and atmospheric pressure has been reported to be catalyzed by Fe 3 O 4 at the air-water interface. By integrating ambient pressure X-ray photoelectron spectroscopy and ab initio molecular dynamics and free energy calculations, we investigate the underlying thermodynamic mechanisms governing ammonia and hydrazine formation at the water-Fe 3 O 4 -nanoparticle interface. Here, we find that, unlike pure Fe 3 O 4 where N 2 can only interact with a limited number of Fe sites, hydroxylated species introduce large and diverse adsorption geometries where N 2 can bind through either Fe sites or Fe-OH groups, each of which are capable of independently facilitating proton-coupled electron transfer.

Chandy, Sruthy K. [University of California, Berke↗

DOE OSTI2021

Scalable nanomanufacturing of chalcogenide inks: a case study on thermoelectric V–VI nanoplates

Solution-processed semiconducting main-group chalcogenides (MMCs) have attracted increasing research interest for next-generation device technologies owing to their unique nanostructures and superior properties. To achieve the full potential of MMCs, the development of highly universal, scalable, and sustainable synthesis and processing methods of chalcogenide particles is thus becoming progressively more important. Here we studied scalable factors for the synthesis of two-dimensional (2D) V–VI chalcogenide nanoplates (M 2 Q 3 : M = Sb, Bi; Q = Se, Te) and systematically investigated their colloidal behaviour and chemical stability. Based on a solvent engineering technique, we demonstrated scale-up syntheses of MMCs up to a 900% increase of batch size compared with conventional hydrazine-based gram-level syntheses, and such a scalable approach is highly applicable to various binary and ternary MMCs. Furthermore, we studied the stability of printable chalcogenide nanoparticle inks with several formulation factors including solvents, additives, and pH values, resulting in inks with high chemical stability (>4 months). As a proof of concept, we applied our solution-processed chalcogenide particles to multiple additive manufacturing methods, confirming the high printability and processability of MMC inks. Furthermore, the ability to combine the top-down designing freedom of additive manufacturing with bottom-up scalable synthesis of chalcogenide particles promises great opportunities for large-scale design and manufacturing of chalcogenide-based functional devices for broad application.

36 MATERIALS SCIENCE↗

DOE OSTI2022

How additives for tin halide perovskites influence the Sn 4+ concentration

Tin halide perovskite (Sn-HPs) photovoltaics could potentially equal or exceed the performance of their more toxic Pb-based analogues if defect state densities, particularly originating from the presence of Sn 4+ , can be significantly decreased. Numerous additives are incorporated into Sn-HPs to minimize the amount of Sn 4+ , including SnF 2 , reducing agents such as hydrazine derivatives, and various antioxidants. However, despite the frequent use of additives to reduce Sn 4+ content, there is limited understanding of how they function and consequently limited guidance for the development of new additives. Herein, we use cyclic voltammetry to probe the redox behavior of SnI 2 , SnI 4 , Sn-HP precursor solutions, and 18 different additives. Through 119 Sn NMR measurements we show that hydrochloride containing additives undergo halide exchange with SnI 4 to form SnI x Cl y , which results in decreased Sn 4+ concentrations and less p-type character in the Sn-HP films. We find that the most effective additive at lowering the Sn 4+ content in FASnI 3 is not capable of reducing SnI 4 or forming SnI x Cl y , but rather it acts as a sacrificial and coordinating antioxidant. In general, when selecting additives for Sn-HPs it is important to account for the redox potential, coordination with Sn species, ability to react with oxygen, and the potential for halide exchange.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Recycling organoiridium waste to [(1,5-cyclooctadiene)IrCl] 2

We report the first process for iridium element recovery from organoiridium waste that is quantitative, pyrolysis-free, and generates no iridium metal. Here, the key step is oxidative degradation of the waste by bleach to crude iridium(IV) hydroxide. Its treatment with hydrazine and then hydrogen peroxide gives synthetically important hexachloroiridic acid, which is converted to [(1,5-cyclooctadiene)IrCl] 2 in 87% yield.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Tetrahedral W 4 cluster confined in graphene-like C 2 N enables electrocatalytic nitrogen reduction from theoretical perspective

Abstract Exploring the format of active site is essential to further the understanding of an electrocatalyst working under ambient conditions. Herein, we present a DFT study of electrocatalytic nitrogen reduction (eNRR) on W 4 tetrahedron embedded in graphene-like C 2 N (denoted as W 4 @C 2 N). Our results demonstrate that N-affinity of active sites on W 4 dominate over single-atom site, rendering *NH 2 + (H + + e - ) →*NH 3 invariably the potential-determining step (PDS) of eNRR via consecutive or distal route ( U L = -0.68 V) to ammonia formation. However, *NHNH 2 + (H + + e - ) →*NH 2 NH 2 has become the PDS ( U L = -0.54 V) via enzymatic route towards NH 2 NH 2 formation and thereafter desorption, making W 4 @C 2 N a potentially promising catalyst for hydrazine production from eNRR. Furthermore, eNRR is competitive with hydrogen evolution reaction ( U L = -0.78 V) on W 4 @C 2 N, which demonstrated sufficient thermal stability and electric property for electrode application.

Materials Science↗

DOE OSTI2021

Direct fabrication and characterization of vertically stacked Graphene/h-BN/Graphene tunnel junctions

We have used a lithography free technique for the direct fabrication of vertically stacked two-dimensional (2D) material-based tunnel junctions and characterized by Raman, AFM, XPS. We fabricated Graphene/h-BN/Graphene devices by direct deposition of graphene (bottom layer), h-BN (insulating barrier) and graphene (top layer) sequentially using a plasma enhanced chemical vapor deposition on Si/SiO 2 substrates. The thickness of the h-BN insulating layer was varied by tuning the plasma power and the deposition time. Samples were characterized by Raman, AFM, and XPS. The I-V data follows the barrier thickness dependent quantum tunneling behavior for equally doped graphene layers. The resonant tunneling behavior was observed at room temperature for oppositely doped graphene layers where hydrazine and ammonia were used for n-doping of one of the graphene layers. The resonance with negative differential conductance occurs when the band structures of the two electrodes are aligned. The doping effect of the resonant peak is observed for varying doping levels. The results are explained according to the Bardeen tunneling model.

2D-materials↗

DOE OSTI2020

Materials Data on H6SN2 by Materials Project

NH3NH2H2(NH2)2SHS1 crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of four ammonia molecules, four ammonia molecules, four hydrazine;sulfane molecules, four hydrogen molecules, and four hydrogen sulfide molecules.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Materials Data on CoH15N7ClO5 by Materials Project

CoH5(N2O)2(NH)2(H2)2HNO2H2OHCl crystallizes in the orthorhombic Pna2_1 space group. The structure is zero-dimensional and consists of four hydrazine molecules; four hydrochloric acid molecules; eight hydrogen molecules; four hydroxylamine, n-hydroxy- molecules; four water molecules; and four CoH5(N2O)2 clusters. In each CoH5(N2O)2 cluster, Co3+ is bonded in a rectangular see-saw-like geometry to four N1- atoms. There are a spread of Co–N bond distances ranging from 1.75–2.02 Å. There are four inequivalent N1- sites. In the first N1- site, N1- is bonded in a trigonal planar geometry to one Co3+ and two O2- atoms. There is one shorter (1.24 Å) and one longer (1.25 Å) N–O bond length. In the second N1- site, N1- is bonded in a distorted trigonal planar geometry to one Co3+ and two H1+ atoms. Both N–H bond lengths are 1.02 Å. In the third N1- site, N1- is bonded in a bent 150 degrees geometry to one Co3+ and one H1+ atom. The N–H bond length is 1.03 Å. In the fourth N1- site, N1- is bonded in a distorted trigonal non-coplanar geometry to one Co3+ and two H1+ atoms. Both N–H bond lengths are 1.02 Å. There are five inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one N1- atom. In the second H1+ site, H1+ is bonded in a single-bond geometry to one N1- atom. In the third H1+ site, H1+ is bonded in a single-bond geometry to one N1- atom. In the fourth H1+ site, H1+ is bonded in a single-bond geometry to one N1- atom. In the fifth H1+ site, H1+ is bonded in a single-bond geometry to one N1- atom. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a single-bond geometry to one N1- atom. In the second O2- site, O2- is bonded in a single-bond geometry to one N1- atom.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Preparing large area of thermochromic nanocomposite films for smart window application

The challenges posed by high building energy bill necessitate proactive implementation of energy-efficient strategies to minimize the uses of both electricity and heating gas and promote the use of free solar energy sources. "Smart" window films/glass, leveraging thermochromic vanadium dioxide (VO 2 ), offer an adaptive approach to harness solar energy, significantly reducing the thermal load of buildings. This is achieved by reflecting the infrared portion of the solar spectrum through a phase transition in the monoclinic M-phase (M) of VO 2 induced by heating. In this study, a scalable continuous flow synthesis process invented by Argonne was employed to explore a wide parameter space, targeting the controlled synthesis of monoclinic VO 2 (M) nanoparticles with well-controlled sizes and morphologies. Additionally, a doping strategy and surface modifications were utilized for high-throughput tuning of the metal-to-insulator transition temperature. Strategies to enhance the solar modulation properties of VO 2 nanoparticles in polymer films were investigated through (i) morphological transformation from spherical to nanorod structures, (ii) surface modification with low refractive index ligands, and (iii) incorporation of additional thermochromic materials for improved solar energy modulation and aesthetically appealing colors in smart films. Furthermore, the study outlines scaling-up synthesis methods for VO 2 nanoparticles in a continuous flow reactor using hydrazine monohydrate. This comprehensive investigation provides valuable insights into the upscaling synthesis and design of advanced VO 2 /polymer composite smart window films with enhanced functionality, solar energy modulation and visible light transmittance, driving the technology a step close for industrial application.

14 SOLAR ENERGY↗

DOE OSTI2021

Gamma Radiolysis of Biphasic Acetohydroxamic Acid (AHA) Solvent Systems

Acetohydroxamic acid (AHA) has been proposed as a substitute for uranium(IV) and hydrazine as a plutonium complexant and neptunium reductant for simplified, single-cycle used nuclear fuel reprocessing flowsheets. However, the chemical behavior of AHA in an intense multi-component radiation field is poorly understood, especially under representative biphasic reprocessing solvent system conditions. In response to this critical knowledge gap, this study has investigated the gamma radiolytic integrity of AHA in aqueous nitric solutions in contact with an organic phase, comprising current and future reprocessing ligands (TBP, DEHBA, and DEHiBA) dissolved in n-dodecane diluent. Our data show negligible effect of the organic phase on the radiolytic behavior of AHA compared to complementary single-phase experiments.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2021

Radiolytic evaluation of acetohydroxamic acid (AHA) under biphasic (n-dodecane and TBP/DEHBA/DEHiBA) used nuclear fuel reprocessing conditions

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2022

Dinitrogen Binding and Functionalization

This chapter presents fundamental aspects of the coordination chemistry of N 2 , including structure, spectroscopy, reactivity, and catalysis. We start by comparing and contrasting the binding of N 2 with the isoelectronic CO ligand that is familiar to organometallic chemists, and show that though they are isolobal, there are significant differences. We also describe the numerous practical considerations to bear in mind when preparing, studying, and interpreting the properties and reactions of N 2 complexes, and include pitfalls from the perspective of practitioners. The different binding modes and reactions of N 2 complexes are tabulated, giving representative examples of various complexes and reactions. Formation of new bonds between N 2 and H sources such as protons and H 2 , as well as multiatomic groups containing Si, C, and B, give insight into the status of the field and opportunities for the future.

ammonia↗