Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydrothermal carbonization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Laboratory simulated hydrothermal alteration of sedimentary organic matter from Guaymas Basin, Gulf of California

High temperature alteration of sedimentary organic matter associated with marine hydrothermal systems involves complex physical and chemical processes that are not easily measured in most natural systems. Many of these processes can be evaluated indirectly by examining the geochemistry of the hydrothermal system in the laboratory. In this investigation, an experimental organic geochemical approach to studying pyrolysis of sedimentary organic matter is applied to the hydrothermal system in the Guaymas Basin, Gulf of California. A general survey of hydrothermal oils and extractable organic matter (bitumen) in hydrothermally altered sediments identified several homologous series of alkanones associated with a high temperature hydrothermal origin. The alkanones range in carbon number from C11 to C30 with no carbon number preference. Alkan-2-ones are in highest concentrations, with lower amounts of 3-, 4-, 5- (and higher) homologs. The alkanones appear to be pyrolysis products synthesized under extreme hydrothermal conditions. Hydrous pyrolysis and confinement pyrolysis experiments were performed to simulate thermally enhanced diagenetic and catagenetic changes in the immature sedimentary organic matter. The extent of alteration was measured by monitoring the n-alkanes, acyclic isoprenoids, steroid and triterpenoid biomarkers, polycyclic aromatic hydrocarbons and alkanones. The results were compared to bitumen extracts from sediments which have been naturally altered by a sill intrusion and accompanied hydrothermal fluid flow. These pyrolysis experiments duplicated many of the organic matter transformations observed in the natural system. Full hopane and sterane maturation occurred after 48 hr in experiments at 330 deg C with low water/rock mass ratios (0.29). A variety of radical and ionic reactions are responsible for the organic compound conversions which occur under extreme hydrothermal conditions. Short duration pyrolysis experiments revealed that a portion of the hydrocarbons generated from kerogen was observed to go through alkene intermediates, and the rate of alkene isomerization was influenced by the ionic strength and catalytic mineral phases. Confinement of the organic pyrolysate to the bulk sediment accelerated the rates of the biomarker epimerization reactions, suggesting that these reactions are influenced strongly by the association of the inorganic matrix, and that the relative rates of some ionic and radical reactions can be influenced by the water/rock ratio during the pyrolysis experiments.

Leif, Roald N.↗

Assessing Organic Preservation and the Implications for Potential Biosignatures in the Bastide Member of the Séítah Formation, Jezero Crater

Introduction: Olivine has the highest CO2 trapping potential of ultramafic minerals, due to its rapid rate of dissolution and high percentage of divalent cations/unpolymerized silicate tetrahedra [1]. It generates divalent carbonates from CO2 and sequesters CO2 into the mineral matrix of the target lithology. The co-occurrence of olivine and carbonate within abraded targets from the Bastide Member of the Séítah Formation (Fm) of the Jezero crater floor [2] suggests the carbonation of olivine occurred within the mineral matrix hosted in a subsurface system. Hydrothermal origins for the subsurface system are hypothesized from orbital data [3]. This is supported by the detection of hydration features within the rock as well as the carbonate features are solely detected within the abrasion patch but not the rock’s surface. Organic preservation potential of abrasion patches: We incorporated the SHERLOC/WATSON results acquired from the Dourbes, Garde, and Quartier abrasion patches in the Séítah Fm to investigate the organomineral associations, and determine the biosignature preservation potential of these rocks. Dourbes is dominated by olivine and has minor amounts of carbonate, hydrated Ca-sulfate, and amorphous or microcrystalline silicate. Fluorescence features (330-340 nm) are detected in discrete locales and could be consistent with double ring aromatic organic molecules; yet, these features do not appear to be associated with an identified mineral phase. Dark subhedral to euhedral olivine grains within the Garde abrasion patch often co-occur with carbonate-consistent spectral signatures in all analyzed scans. The availability of Fe2+ is a known influence on olivine dissolution rates [1] and SuperCam estimates of the olivine composition (Forsterite-60 average for Sols 202-234) may thereby provide a constraint on the carbonation extent. Carbonated olivine phenocrysts within the matrix may be due to aqueous alteration, as the carbonation of nodules is consistent with observations in other hydrothermal systems and within Martian meteorites (ALH84001) [4]. In comparison, the Quartier abrasion patch represents an extensively altered endmember within the Bastide Member of the Séítah Fm. It contains a fluorescence doublet at 305/325 nm that coexists with multiple species of Na-sulfate and Mg-sulfate, Mg-carbonates, olivine [5]. Aqueous alteration and implications for habitability: The identification of primary and secondary mineral phases observed in the Bastide Member suggests the release of cations from primary ultramafic minerals through aqueous alteration. Within Garde, the carbonate detected appears to be Mg-rich and likely formed from the in situ alteration of Mg-rich olivine within the region as carbonate has only been detected within the rock via in situ analysis. Carbonates derived from abiotic and biotic reactions preserve biosignatures (i.e. indices of habitability) on Earth. The detected carbonate phase found in association with fluorescent features within the rock matrix may also indicate potential organic compounds preserved in a putative hydrothermal system. Fluorescent features (~330 nm) are unique to Garde and Dourbes, though they are co-located to carbonate signatures solely within Garde, and between the light toned minerals. Identification of these fluorescent features may be consistent with 1-2 ring aromatic compounds. The limit of detection for Raman is multiple orders of magnitude greater than the limit of detection required for fluorescence [6]. Implications for provenance: Hydrothermal systems represent disequilibrium chemical conditions that are hypothesized to have supported the emergence of life and also preserve ancient carbon within precipitated carbonates [7]. Hydrothermal system associated carbonates are capable of preserving biosignatures up to an estimated ~3.77 – 4.28 Gya [8]. Thus, carbonated olivine found within the Séítah Fm may represent a high-potential biosignature preserving environment on Mars. The formation of carbonates by an aqueous alteration process, such as carbonation of olivine is also consistent with hypotheses for carbonate within the greater regional-olivine bearing unit [2,3], which contains Garde, Dourbes, and Quartier. Acknowledgments: This work was carried out at the Jet Propulsion Laboratory, The California Institute of Technology under a contract from NASA. References: [1] Wood et al., (2019) ES&T, 6, 10. [2] Stack, K. et al., (2020) Space Sci Rev, 216, 127. [3] Tarnas, J. et al., (2021) JGR: Planets, 126, 11. [4] Steele et al., (2007) Meteorit. Planet. Sci., 42, 9. [5] Murphy, A.E. et al., (2022) LPSC [6] Bhartia et al., (2021) Space Sci Rev, 217, 58. [7] Luther (2021) GRL, 48, e2021GL094869. [8] Dodd et al., (2017) Nature, 543, 60-64

E L Cardarelli↗

230Th Normalization: New Insights on an Essential Tool for Quantifying Sedimentary Fluxes in the Modern and Quaternary Ocean

230Th normalization is a valuable paleoceanographic tool for reconstructing high‐resolution sediment fluxes during the late Pleistocene (last ~500,000 years). As its application has expanded to ever more diverse marine environments, the nuances of 230Th systematics, with regard to particle type, particle size, lateral advective/diffusive redistribution, and other processes, have emerged. We synthesized over 1000 sedimentary records of 230Th from across the global ocean at two time slices, the late Holocene (0–5,000 years ago, or 0–5 ka) and the Last Glacial Maximum (18.5–23.5 ka), and investigated the spatial structure of 230Th‐normalized mass fluxes. On a global scale, sedimentary mass fluxes were significantly higher during the Last Glacial Maximum (1.79–2.17 g/sq.cmkyr, 95% confidence) relative to the Holocene (1.48–1.68 g/sq.cmkyr, 95% confidence). We then examined the potential confounding influences of boundary scavenging, nepheloid layers, hydrothermal scavenging, size‐dependent sediment fractionation, and carbonate dissolution on the efficacy of 230Th as a constant flux proxy. Anomalous 230Th behavior is sometimes observed proximal to hydrothermal ridges and in continental margins where high particle fluxes and steep continental slopes can lead to the combined effects of boundary scavenging and nepheloid interference. Notwithstanding these limitations, we found that 230Th normalization is a robust tool for determining sediment mass accumulation rates in the majority of pelagic marine settings (>1,000 m water depth).

Costa, Kassandra M.↗

Experimental Study of Abiotic Organic Synthesis at High Temperature and Pressure Conditions: Carbon Isotope and Mineral Surface Characterizations

Abiotic organic synthesis processes have been proposed as potential mechanisms for methane generation in subseafloor hydrothermal systems on Earth, and on other planets. To better understand the detailed reaction pathways and carbon isotope fractionations in this process under a wide range of physical and chemical conditions, hydrothermal experiments at high temperature (750 C) and pressure (0.55 GPa) were performed using piston cylinder apparatus. Formic acid was used as the source of CO2 and H2, and magnetite was the mineral catalyst. The chemical and carbon isotopic compositions of dissolved organic products were determined by GC-C-MS-IRMS, while organic intermediaries on the mineral catalyst were characterized by Pyrolysis-GC-MS. Among experimental products, dissolved CO2 was the dominant carbon species with a relative abundance of 88 mol%. Dissolved CH4 and C2H6 were also identified with a mole ratio of CH4 over C2H6 of 15:1. No dissolved CO was detected in the experiment, which might be attributable to the loss of H2 through the Au capsule used in the experiments at high temperature and pressure conditions and corresponding conversion of CO to CO2 by the water-gas shift reaction. Carbon isotope results showed that the 13C values of CH4 and C2H6 were -50.3% and -39.3% (V-PDB), respectively. CO2 derived from decarboxylation of formic acid had a (sigma)C-13 value of -19.2%, which was 3.2% heavier than its source, formic acid. The (sigma)C-13 difference between CO2 and CH4 was 31.1%, which was higher than the value of 9.4% calculated from theoretical isotopic equilibrium predictions at experimental conditions, suggesting the presence of a kinetic isotope effect. This number was also higher than the values (4.6 to 27.1%) observed in similar experiments previously performed at 400 C and 50 MPa with longer reaction times. CH4 is 11.0% less enriched in C-13 than C2H6. Alcohols were observed as carbon compounds on magnetite surfaces by Pyrolysis-GC-MS, which confirms the hypothesis regarding the reaction pathways of hydrothermal abiotic organic synthesis proposed by Fu et al. (2007, 2008). In this proposed pathway, hydroxymethylene (-CHOH) groups serve as organic intermediaries on mineral surfaces while dissolved H2 serves as a chain terminator/breaker to generate short chain hydrocarbons and oxygenated compounds. This pathway is different from the carbide polymerization theory of Fischer- Tropsch-type (FTT) synthesis in a gas phase. The observed increase of (sigma)C-13 values of C1 and C2 alkanes with carbon number in our hydrothermal experiments can be readily interpreted by hydroxymethylene pathway, and might be used to differentiate between hydroxymethylene and carbide polymerization pathways. Carbon isotope analysis of alcohols on mineral catalyst surfaces is under way to provide further constraints on formation of organic compounds by FTT in hydrothermal systems.

Fu, Qi↗

Evaluation of multispectral middle infrared aircraft images for lithologic mapping in the East Tintic Mountains, Utah

Six channels of multispectral middle infrared (8 to 14 micron) aircraft scanner data were acquired over the East Tintic mining district, Utah. This area has high relief and moderate vegetation and consists mainly of Tertiary silicic igneous rocks and Paleozoic quartzite and carbonate rocks that have been locally hydrothermally altered. These digital-image data were computer processed to create a color-composite image based on principal component transformations. Color differences in this image are related to the spectral differences in the surface material and allow discrimination of several rock types, depending primarily on their silica content. When combined with a visible and near infrared color-composite image from a previous flight, with limited field checking, it is possible to discriminate quartzite, carbonate rocks, quartz latitic and quartz monzonitic rocks, latitic and monzonitic rocks, silicified altered rocks, argillized altered rocks, and vegetation.

Kahle, A. B.↗

Determination of the Three-Dimensional Morphology of ALH84001 and Biogenic MV-1 Magnetite: Comparison of Results from Electron Tomography and Classical Transmission Electron Microscopy

Dated at approximately 3.9 billion years of age, carbonate disks, found within fractures of the host rock of Martian meteorite ALH84001, have been interpreted as secondary minerals that formed at low temperature in an aqueous medium. Heterogeneously distributed within these disks are magnetite nanocrystals that are of Martian origin. Approximately one quarter of these magnetites have morphological and chemical similarities to magnetite particles produced by magnetotactic bacteria strain MV-1, which are ubiquitous in aquatic habitats on Earth. Moreover, these types of magnetite particles are not known or expected to be produced by abiotic means either through geological processes or synthetically in the laboratory. The remaining three quarters of the ALH84001 magnetites are likely products of multiple processes including, but not limited to, precipitation from a hydrothermal fluid, thermal decomposition of the carbonate matrix in which they are embedded, and extracellular formation by dissimilatory Fe-reducing bacteria. We have proposed that the origins of magnetites in ALH84001 can be best explained as the products of multiple processes, one of which is biological. Recently the three-dimensional (3-D) external morphology of the purported biogenic fraction of the ALH84001 magnetites has been the subject of considerable debate. We report here the 3-D geometry of biogenic magnetite crystals extracted from MV-1 and of those extracted from ALH84001 carbonate disks using a combination of high resolution classical and tomographic transmission electron microscopy (TEM). We focus on answering the following questions: (1) which technique provides adequate information to deduce the 3-D external crystal morphology?; and, (2) what is the precise 3-D geometry of the ALH84001 and MV-1 magnetites?

Thomas-Keprta, Kathie L.↗

Isotope Geochemistry of Possible Terrestrial Analogue for Martian Meteorite ALH84001

We have studied the microdomain oxygen and carbon isotopic compositions by SIMS of complex carbonate rosettes from spinel therzolite xenoliths, hosted by nepheline basanite, from the island of Spitsbergen (Norway). The Quaternary volcanic rocks containing the xenoliths erupted into a high Arctic environment and through relatively thick continental crust containing carbonate rocks. We have attempted to constrain the sources of the carbonates in these rocks by combined O-18/O-16 and C-13/C-12 ratio measurements in 25 micron diameter spots of the carbonate and compare them to previous work based primarily on trace-element distributions. The origin of these carbonates can be interpreted in terms of either contamination by carbonate country rock during ascent of the xenoliths in the host basalt, or more probably by hydrothermal processes after emplacement. The isotopic composition of these carbonates from a combined delta.18O(sub SMOW) and delta.13C(sub PDB) standpoint precludes a primary origin of these minerals from the mantle. Here a description is given of the analysis procedure, standardization of the carbonates, major element compositions of the carbonates measured by electron microprobe, and their correlated C and O isotope compositions as measured by ion microprobe. Since these carbonate rosettes may represent a terrestrial analogue to the carbonate "globules" found in the martian meteorite ALH84001 interpretations for the origin of the features found in the Spitsbergen may be of interest in constraining the origin of these carbonate minerals on Mars.

Mojzsis, Stephen J.↗

Low temperature hydrothermal maturation of organic matter in sediments from the Atlantis II Deep, Red Sea

Hydrocarbons and bulk organic matter of two sediment cores within the Atlantis II Deep are analyzed, and microbial inputs and minor terrestrial sources are found to represent the major sedimentary organic material. Results show that extensive acid-catalyzed reactions are occurring in the sediments, and the Atlantis II Deep is found to exhibit a lower degree of thermal maturation than other hydrothermal or intrusive systems. The lack of carbon number preference noted among the n-alkanes suggests that the organic matter of these sediments has undergone some degree of catagenesis, though yields of hydrocarbons are much lower than those found in other hydrothermal areas, probably due to the effect of lower temperature and poor source-rock characteristics.

Simoneit, Bernd R. T.↗

Detection of Abiotic Methane in Terrestrial Continental Hydrothermal Systems: Implications for Methane on Mars

The recent detection of methane in the Martian atmosphere and the possibility that its origin could be attributed to biological activity, have highlighted the importance of understanding the mechanisms of methane formation and its usefulness as a biomarker. Much debate has centered on the source of the methane in hydrothermal fluids, whether it is formed biologically by microorganisms, diagenetically through the decomposition of sedimentary organic matter, or inorganically via reduction of CO2 at high temperatures. Ongoing research has now shown that much of the methane present in sea-floor hydrothermal systems is probably formed through inorganic CO2 reduction processes at very high temperatures (greater than 400 C). Experimental results have indicated that methane might form inorganically at temperatures lower still, however these results remain controversial. Currently, methane in continental hydrothermal systems is thought to be formed mainly through the breakdown of sedimentary organic matter and carbon isotope equilibrium between CO2 and CH4 is thought to be rarely present if at all. Based on isotopic measurements of CO2 and CH4 in two continental hydrothermal systems, we suggest that carbon isotope equilibration exists at temperatures as low as 155 C. This would indicate that methane is forming through abiotic CO2 reduction at lower temperatures than previously thought and could bolster arguments for an abiotic origin of the methane detected in the martian atmosphere.

Socki, Richard A.↗

Survey for Life-related Species During a Planetary Surface Exploration; System Type I - UV Stimulated Fluorescent Sensor

The widely accepted minimum requirements for life on Earth include the presence of water and accessible sources of carbon. We assume that the same criteria must hold for putative life on past or present Mars. The evidence for CO2 and H2O at or near the Martian surface, carbon in Martian meteorites, aqueous alteration, and probable hydrothermal activity suggest that conditions conducive to the origin and evolution of life on Mars may have existed for long periods of time and may still obtain at present. Surface exploration on Mars that enables the direct detection of water in minerals and of organic carbon (including not just organic and biogenic materials but their degradation products such as kerogen-like hydrocarbons and graphitized carbon) that might be products or residues of biologic activity, is crucial. The search for evidence of life, past or present, will nevertheless be difficult. The lack of direct evidence for organic carbon and the low amounts of water found in the soils at the Viking sites demonstrated the difficulties. Recent results of GRS experiment of Odyssey mission indicated the existence of abundant water ice beneath the Mars surface. Mineralogical evidence for the presence of carbonate, sulfates, or clay minerals, products of weathering and aqueous deposition, have not been identified unambiguously on Mars. Rocks such as shales and, more particularly, limestones, which we associate with moist and benign environments on Earth, are evidently not abundant. Presumably, then, neither were the photosynthetic organisms that might have produced them. In addition, the harsh present environment on Mars (e.g., dryness, low temperatures, large temperature cycles, high level of UV light on the surface, frequent dust storms, etc.) can both destroy carbon- and water-bearing materials and hide them. Therefore, directly detecting life-related materials on Mars was likened to seeking and examining proverbial needles in haystacks. We argue that survey type instruments, that can frequently and quickly check a relatively large amount of material at many locations during a mission, are essential.

Wang, Alian↗

The Water-Wheel IR (WIR): A Contact Survey Experiment for Water and Carbonates on Mars

Minimum requirements for life include water and accessible carbon. Mars has both in its polar caps and atmosphere. Water (or water-equivalent hydrogen) is present at shallow depths (approx. 10-20 cm) at latitudes =60 and is heterogeneously distributed in other parts of Mars [1]. Mars may have once had surface water that could plausibly have produced carbonate deposits [2-5]. Mars shows signs of hydrothermal activity [6-8] that may have affected soil composition [9, 10]. The Thermal Emission Spectrometer on the Mars Global Surveyor found large and small patches of hematite that may have been water-borne or water-derived [11, 12]. Current orbiting spacecraft (MGS & Odyssey) have not found massive carbonate deposits, however [13]. Shales and limestones, which we associate with moist and benign environments on Earth, are apparently not abundant on Mars. Both carbonate and organic carbon occur as alteration products in Martian meteorites of igneous origin [14]. One study of MGS-TES data suggests 2-5 wt% carbonates (mainly MgCO3) in surface dust, but found no concentrated source [15]. Carbonates and H2O/OH bearing minerals will be sought by the mini-TES and Mossbauer experiments on the Mars Exploration Rovers, one of which landed successfully on Mars on January 3.

Wang, Alian↗

Geologic Settings of Martian Gullies: Implications for Their Origins

Martian gullies are found on steep slopes of all origins, on all sorts of terrains of all ages, scattered across nearly all of Mars. Gullies are observed on all manner of substrates (layered, massive, shattered, rubble), with or without nearby mantling deposits. Gullies are most common in the southern midlatitudes but also occur in the northern hemisphere, in near polar terrain, on equatorial volcanoes, and on northern plains. Most gullies in the southern hemisphere are on south-facing slopes, but they occur on slopes of all orientations. Gullies are among the youngest features on Mars but locally are overlain by eolian deposits and cut by faults. Old or eroded gullies are rare, and those found have been partially stripped from slopes, leaving no rock debris behind. Most gully deposits contain no detectable rocks. These data are inconsistent with published hypotheses of gully formation, including seeps and breakouts of water or brine, hydrothermal activity, cryovolcanism, and breakouts from liquid carbon dioxide. The data are consistent with gullies being dry flows of eolian material (dust and silt), comparable to climax snow avalanches on Earth. Eolian sedimentation should be correlated little with underlying geology: cause of slope, age of terrain, type of terrain, or the nature of the rocks. Eolian sedimentation should be correlated with wind deceleration (which will cause suspended sediment to drop), and areas with common gullies are those with strong wind deceleration (predicted by global circulation model). In such areas, sediment will be deposited preferentially in the lee of obstacles; for the gully-rich areas of the southern midlatitudes, winds blow from the NNW, so that sediment is deposited on SSE-facing slopes (i.e., poleward). These predictions are in accord with observations.

Treiman, Allan H.↗

Mineral Mapping with AVIRIS and EO-1 Hyperion

Imaging Spectrometry data or Hyperspectral Imagery (HSI) acquired using airborne systems have been used in the geologic community since the early 1980 s and represent a mature technology (Goetz et al., 1985; Kruse et al., 1999). The solar spectral range, 0.4 to 2.5 m, provides abundant information about many important Earth-surface minerals (Clark et al., 1990). In particular, the 2.0 to 2.5 m (SWIR) spectral range covers spectral features of hydroxyl-bearing minerals, sulfates, and carbonates common to many geologic units and hydrothermal alteration assemblages. Previous research has proven the ability of airborne and spaceborne hyperspectral systems to uniquely identify and map these and other minerals, even in sub-pixel abundances (Kruse and Lefkoff, 1993; Boardman and Kruse, 1994; Boardman et al., 1995; Kruse, et al., 1999). This paper describes a case history for a site in northern Death Valley, California and Nevada along with selected SNR calculations/results for other sites around the world. Various hyperspectral mineral mapping results for this site have previously been presented and published (Kruse, 1988; Kruse et al., 1993, 1999, 2001, 2002, 2003), however, this paper presents a condensed summary of key details for hyperspectral data from 2000 and 2001 and the results of accuracy assessment for satellite hyperspectral data compared to airborne hyperspectral data used as ground truth.

Kruse, Fred A.↗

In-situ Raman Instrumentation and Measurements in Supercritical Water Oxidation Systems

Due to the advent of recent advances in reactor designs and operational procedures, renewed attention has been given to a host of supercritical water oxidation (SCWO) technology applications. This includes resource recovery, water reclamation, and solid waste destruction. SCWO is often recognized as a “green technology” because of its ability to extract useful energy while producing benign products from environmentally challenging waste streams (e.g., wet organic wastes, pharmaceutical wastes, military wastes). The present work was motivated by NASA’s interests in solid waste management and water recovery for long-duration space missions. To that end, the main focus of this paper is to present work on characterizing the behavior of supercritical water oxidation systems utilizing state of the art laser Raman spectroscopy. The main benefit of Raman diagnostics is its ability to identify chemical composition and to measure concentrations of the compounds involved in the reaction. Two separate Raman systems for SCWO measurements that have been developed for this study will be described. The first system is a 2-D traversing system useful for making in-situ measurements in conditions where spatial gradients of species and temperature are important and has been successfully utilized in making species (ethanol, oxygen, water, nitrogen and carbon dioxide) concentrations and temperature measurements in ethanol hydrothermal jet flames. The second system is a packaged modular Raman probe unit for portable deployment to different reactors and is more suitable for relatively homogeneous systems such as a batch reactor. The design, development, and examples of obtained results from both systems will be presented for various reactant streams. Reaction rate and fuel conversion estimates from chemistry models will also be presented.

supercritical water oxidation↗

Carbonate petrography, kerogen distribution, and carbon and oxygen isotope variations in an early Proterozoic transition from limestone to iron-formation deposition, Transvaal Supergroup, South Africa

The transition zone comprises Campbellrand microbialaminated (replacing "cryptalgalaminate") limestone and shale, with minor dolomite, conformably overlain by the Kuruman Iron Formation of which the basal part is characterized by siderite-rich microbanded iron-formation with minor magnetite and some hematite-containing units. The iron-formation contains subordinate intraclastic and microbialaminated siderite mesobands and was deposited in deeper water than the limestones. The sequence is virtually unaltered with diagenetic mineral assemblages reflecting a temperature interval of about 110 degrees to 170 degrees C and pressures of 2 kbars. Carbonate minerals in the different rock types are represented by primary micritic precipitates (now recrystallized to microsparite), early precompactional sparry cements and concretions, deep burial limpid euhedral sparites, and spar cements precipitated from metamorphic fluids in close contact with diabase sills. Paragenetic pathways of the carbonate minerals are broadly similar in all lithofacies with kerogen intimately associated with them. Kerogen occurs as pigmentation in carbonate crystals, as reworked organic detritus in clastic-textured carbonate units, and as segregations of kerogen pigment around late diagenetic carbonate crystals. Locally kerogen may also be replaced by carbonate spar. Carbon isotope compositions of the carbonate minerals and kerogen are dependent on their mode of occurrence and on the composition of the dominant carbonate species in a specific lithofacies. Integration of sedimentary, petrographic, geochemical, and isotopic results makes it possible to distinguish between depositional, early diagenetic, deep burial, and metamorphic effects on the isotopic compositions of the carbonate minerals and the kerogen in the sequence. Major conclusions are that deep burial thermal decarboxylation led to 13C depletion in euhedral ferroan sparites and 13C enrichment in kerogen (organic carbon). Metamorphic sparites are most depleted in 13C. Carbonates in oxide-rich iron-formations are more depleted in 13C than those in siderite-rich iron-formation whereas the kerogens in oxide banded iron-formations (BIF) are more enriched. This implies that the siderite-rich iron-formations were not derived from oxide-rich iron-formation through reduction of ferric iron by organic matter. Organic matter oxidation by ferric iron did, however, decrease the abundance of kerogen in oxide-rich iron-formation and led to the formation of isotopically very light sparry carbonates. Siderite and calcmicrosparite both represent recrystallized primary micritic precipitates but differ in their 13C composition, with the siderites depleted in 13C by 4.6 per mil on average relative to calcmicrosparite. This means that the siderites were precipitated from water with dissolved inorganic carbon depleted in 13C by about 9 per mil relative to that from which the limestones precipitated. This implies an ocean system stratified with regard to total carbonate, with the deeper water, from which siderite-rich iron-formation formed, depleted in 13C. Iron-formations were deposited in areas of very low organic matter supply. Depletion of 13C may, therefore, derive not from degradation of organic matter but from hydrothermal activity, a conclusion which is supported by 18O composition of the carbonate minerals and trace element and rare earth element (REE) compositions of the iron-formations.

NASA Discipline Number 52-30↗

Development of a Test for Evaluation of the Hydrothermal Stability of Sorbents Used in Closed-Loop CO2 Removal Systems

The International Space Station Carbon Dioxide Removal Assembly uses zeolite 5A molecular sieve material packed into beds for the capture of cabin CO2. The beds are cyclically heated to drive off the CO2 and restore the removal capacity. Over time, the sorbent material has been found to break down resulting in dust that restricts flow through the beds. Humidity adsorbed in the 5A zeolite when it is heated is a suspected cause of this sorbent degradation. To evaluate the impact of adsorbed water during thermal cycling, the Hydrothermal Stability Test was developed. The test configuration provides comparative side-by-side flow restriction data for two sorbent materials at specifically controlled humidity levels. While the initial focus of the testing is on 5A zeolite materials currently used on the ISS, the system will also be used to evaluate future candidate materials. This paper describes the approach, the test system, current results, and future testing.

Knox, James C.↗

Stable light isotope biogeochemistry of hydrothermal systems

The stable isotopic composition of the elements O, H, S and C in minerals and other chemical species can indicate the existence, extent, conditions and the processes (including biological activity) of hydrothermal systems. Hydrothermal alteration of the 18O/16O and D/H values of minerals can be used to detect fossil systems and delineate their areal extent. Water-rock interactions create isotopic signatures which indicate fluid composition, temperature, water-rock ratios, etc. The 18O/16O values of silica and carbonate deposits tend to increase with declining temperature and thus help to map thermal gradients. Measurements of D/H values can help to decipher the origin(s) of hydrothermal fluids. The 34S/32S and 13C/12C values of fluids and minerals reflect the origin of the S and C as well as oxygen fugacities and key redox processes. For example, a wide range of 34S/32S values which are consistent with equilibration below 100 degrees C between sulfide and sulfate can be attributed to sulfur metabolizing bacteria. Depending on its magnitude, the difference in the 13C/12C value of CO2 and carbonates versus organic carbon might be attributed either to equilibrium at hydrothermal temperatures or, if the difference exceeds 1% (10/1000), to organic biosynthesis. Along the thermal gradients of thermal spring outflows, the 13C/12C value of carbonates and 13C-depleted microbial organic carbon increases, principally due to the outgassing of relatively 13C-depleted CO2.

Review, Tutorial↗

Lipid biomarkers for bacterial ecosystems: studies of cultured organisms, hydrothermal environments and ancient sediments

This paper forms part of our long-term goal of using molecular structure and carbon isotopic signals preserved as hydrocarbons in ancient sediments to improve understanding of the early evolution of Earth's surface environment. We are particularly concerned with biomarkers which are informative about aerobiosis. Here, we combine bacterial biochemistry with the organic geochemistry of contemporary and ancient hydrothermal ecosystems to construct models for the nature, behaviour and preservation potential of primitive microbial communities. We use a combined molecular and isotopic approach to characterize lipids produced by cultured bacteria and test a variety of culture conditions which affect their biosynthesis. This information is then compared with lipid mixtures isolated from contemporary hot springs and evaluated for the kinds of chemical change that would accompany burial and incorporation into the sedimentary record. In this study we have shown that growth temperature does not appear to alter isotopic fractionation within the lipid classes produced by a methanotropic bacterium. We also found that cultured cyanobacteria biosynthesize diagnostic methylalkanes and dimethylalkanes with the latter only made when growing under low pCO2. In an examination of a microbial mat sample from Octopus Spring, Yellowstone National Park (USA), we could readily identify chemical structures with 13C contents which were diagnostic for the phototrophic organisms such as cyanobacteria and Chloroflexus. We could not, however, find molecular evidence for operation of a methane cycle in the particular mat samples we studied.

NASA Discipline Exobiology↗