Search NASA⌕ Search

SEARCH · Search NASA

Results for “I, 1”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Ring Opening in Cycloheptane and Dissociation of 1-Heptene at High Temperatures

Cycloalkanes and alkenes are important components of real fuels but there is little kinetic and mechanistic data on the dissociation of most large cyclic and olefinic molecules at elevated temperatures. We present here the first experimental and theoretical investigation of dissociation of cycloheptane and the initial product from ring opening, 1-heptene. Experiments were performed in a diaphragmless shock tube using laser schlieren densitometry. Pyrolysis of cycloheptane (0.5-4% in Kr) was studied over 1450-2000 K and 30-120 Torr. Experiments with 1-heptene (1-4% in Kr) covered 1200-1650 K and 30-120 Torr. A newly developed chemical kinetic mechanism for pyrolysis of cycloheptane and 1-heptene is presented herein. Simulations are in very good agreement with the experimental measurements. Rate coefficients for the initial ring-opening process in cycloheptane, k 1 , and dissociation of 1-heptene, k 2 , were determined from the experiments. Both k 1 and k 2 are in falloff, and the pressure and temperature dependencies were well reproduced by theoretical calculations allowing extrapolation to conditions beyond the scope of this work. These calculations yielded the following expressions for k 1 and k 2 with the uncertainties estimated as +/- 40% and +/- 50% respectively: k 1 , infinity = 5 . 94 & times; 10 17 exp ( & minus;44 T, 521 ) s & minus;1 and k 2 , infinity = 8 . 86 & times; 10 16 exp ( & minus;35 , 887 T ) s & minus;1 . The results of this study indicate that cycloheptane dissociates similarly to cyclopentane and cyclohexane, i.e. ring-opening via C -C scission to a diradical that rapidly isomerizes to a conjugate 1-alkene. The secondary chemistry is dominated by the dissociation products of the 1-alkenes i.e. allyl and n-alkyl radicals. Furthermore, rates of dissociation of the cycloalkanes are size dependent and k cyclopentane << k cyclohexane < k cycloheptane . (c) 2020 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Chemical kinetics↗

Characterization of Multiple Trichloroethene, cis-Dichloroethene and 1,1-Dichloroethene Degrading Propanotrophic Communities

Aerobic cometabolism offers a viable strategy for the remediation of chlorinated solvent plumes at oxic sites where anaerobic approaches are limited. In this study, propane-enriched mixed cultures (derived from agricultural soils and an impacted site sediment) which previously degraded 1,4-dioxane, were evaluated for their capacity to also degrade trichloroethene (TCE), cis-1,2-dichloroethene (cDCE), and 1,1-dichloroethene (1,1-DCE) over successive transfers. Sustained biodegradation of TCE and cDCE was observed across multiple enrichments, and cultures enriched on one compound generally degraded the other. In contrast, 1,1-DCE biodegradation was restricted to a subset of cultures and removal times increased over transfers. Further, 1,1-DCE removal was absent at elevated concentrations, both trends consistent with inhibitory or toxic effects. Whole genome sequencing analyses revealed pronounced substrate-dependent selection of microbial communities, with cDCE-degrading cultures being dominated by Mycobacterium and Mycolicibacterium, whereas TCE-degrading cultures were dominated by Rhodococcus. Rhodococcus metagenome-assembled genomes (MAGs) in the TCE degrading cultures classified as R. opacus or R. wratislaviensis. 1,1-DCE degrading cultures were dominated by Pseudonocardia, although the associated MAGs contained a truncated propane monooxygenase alpha subunit. Functional gene analysis identified both group 5 (prmABCD) and putative group 6 propane monooxygenases. The following KBase narratives contain the quality controlled reads, MAGs (fasta assemblies) and the prokka annotations for each assembly TCE Site 1A and B Propanotrophic MAGs (https://narrative.kbase.us/narrative/254918) TCE Soil 2A and B Propanotrophic MAGs (https://narrative.kbase.us/narrative/254919) TCE Soil T3 A and B Propanotrophic MAGs (https://narrative.kbase.us/narrative/254920) TCE Soil T4 A and B Propanotrophic MAGs (https://narrative.kbase.us/narrative/254921) cDCE Site 1A 1B Propanotrophic MAGs (https://narrative.kbase.us/narrative/254915) cDCE Soils T2 A and B Propanotrophic MAGs (https://narrative.kbase.us/narrative/254927) cDCE Soil T3 A and B Propanotrophic MAGs (https://narrative.kbase.us/narrative/254928) cDCE Soil 4A and B Propanotrophic MAGs (https://narrative.kbase.us/narrative/254942) 1,1-DCE T2 T3 Propanotrophic MAGs (https://narrative.kbase.us/narrative/254903)

59 BASIC BIOLOGICAL SCIENCES↗

Unidirectional growth of graphene nano-islands from carbon cluster seeds on Ge(1 1 0)

The anisotropic twofold symmetry of Ge(1 1 0) makes it a unique substrate for the growth of single-crystalline graphene. However, the underlying mechanism during the initial stage of growth of graphene on Ge(1 1 0) surface is not well understood. Here, we use in-situ cryogenic scanning tunneling microscopy (STM) and spectroscopy (STS), to study the initial growth properties of graphene synthesized on Ge(1 1 0) surface with ethylene precursor gases. The STM results reveal that the unidirectional growth of the graphene nanoribbons (GNRs) initiates from carbon cluster seeds on terraces during the early stage of the growth. The orientations of the GNRs show the same directions which are nearly parallel to the direction of the Ge(1 1 0) surface. This orientation is the same as that of the wafer-scale graphene grown on Ge(1 1 0). Subsequent growth, transformed the GNRs to graphene nanoislands (GNIs), which eventually coalesced to form single crystalline monolayer graphene. STS measurements demonstrated that the GNRs have small bandgaps induced by the confinement effect of graphene. Furthermore, this study provides an in-depth understanding of the growth mechanism of graphene on Ge(1 1 0) surface in various synthesis conditions.

36 MATERIALS SCIENCE↗

Determination of the relative orientation between 15 N- 1 H dipolar coupling and 1 H chemical shift anisotropy tensors under fast MAS solid-state NMR

Here, in this work, we have proposed a proton-detected three-dimensional (3D) 15 N- 1 H dipolar coupling (DIP)/ 1 H chemical shift anisotropy (CSA)/ 1 H chemical shift (CS) correlation experiment to measure the relative orientation between the 15 N- 1 H dipolar coupling and the 1 H CSA tensors under fast magic angle spinning (MAS) solid-state NMR. In the 3D correlation experiment, the 15 N- 1 H dipolar coupling and 1 H CSA tensors are recoupled using our recently developed windowless C-symmetry-based $C3^{1}_{3}$-ROCSA (recoupling of chemical shift anisotropy) DIPSHIFT and $C3^{1}_{3}$-ROCSA pulse-based methods, respectively. The 2D 15 N- 1 H DIP/ 1 H CSA powder lineshapes extracted using the proposed 3D correlation method are shown to be sensitive to the sign and asymmetry of the 1 H CSA tensor, a feature that allows the determination of the relative orientation between the two correlating tensors with improved accuracy. The experimental method developed in this study is demonstrated on a powdered U- 15 N L-Histidine.HCl·H 2 O sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enzymes in 3D: Synthesis, remodelling, and hydrolysis of cell wall (1,3;1,4)-β-glucans

Abstract Recent breakthroughs in structural biology have provided valuable new insights into enzymes involved in plant cell wall metabolism. More specifically, the molecular mechanism of synthesis of (1,3;1,4)-β-glucans, which are widespread in cell walls of commercially important cereals and grasses, has been the topic of debate and intense research activity for decades. However, an inability to purify these integral membrane enzymes or apply transgenic approaches without interpretative problems associated with pleiotropic effects has presented barriers to attempts to define their synthetic mechanisms. Following the demonstration that some members of the CslF sub-family of GT2 family enzymes mediate (1,3;1,4)-β-glucan synthesis, the expression of the corresponding genes in a heterologous system that is free of background complications has now been achieved. Biochemical analyses of the (1,3;1,4)-β-glucan synthesized in vitro, combined with 3-dimensional (3D) cryogenic-electron microscopy and AlphaFold protein structure predictions, have demonstrated how a single CslF6 enzyme, without exogenous primers, can incorporate both (1,3)- and (1,4)-β-linkages into the nascent polysaccharide chain. Similarly, 3D structures of xyloglucan endo-transglycosylases and (1,3;1,4)-β-glucan endo- and exohydrolases have allowed the mechanisms of (1,3;1,4)-β-glucan modification and degradation to be defined. X-ray crystallography and multi-scale modeling of a broad specificity GH3 β-glucan exohydrolase recently revealed a previously unknown and remarkable molecular mechanism with reactant trajectories through which a polysaccharide exohydrolase can act with a processive action pattern. The availability of high-quality protein 3D structural predictions should prove invaluable for defining structures, dynamics, and functions of other enzymes involved in plant cell wall metabolism in the immediate future.

59 BASIC BIOLOGICAL SCIENCES↗

Determination of the mutual orientation between proton CSA tensors mediated through band-selective 1 H– 1 H recoupling under fast MAS

We report the mutual orientation of nuclear spin interaction tensors provides critical information on the conformation and arrangement of molecules in chemicals, materials, and biological systems at an atomic level. Proton is a ubiquitous and important element in a variety of substances, and its NMR is highly sensitive due to their virtually 100% natural abundance and large gyromagnetic ratio. Nevertheless, the measurement of mutual orientation between the 1 H CSA tensors has remained largely untouched in the past due to strong 1 H– 1 H homonuclear interactions in a dense network of protons. In this study, we have developed a proton-detected 3D 1 H CSA/ 1 H CSA/ 1 H CS correlation method that utilizes three techniques to manage homonuclear interactions, namely fast magic-angle spinning, windowless C-symmetry-based CSA recoupling (windowless-ROCSA), and a band-selective 1 H– 1 H polarization transfer. The asymmetric 1 H CSA/ 1 H CSA correlated powder patterns produced by the C-symmetry-based methods are highly sensitive to the sign and asymmetry parameter of the 1 H CSA, and the Euler angle β as compared to the symmetric pattern obtained by the existing γ-encoded R-symmetry-based CSA/CSA correlation methods and allows a larger spectral area for data fitting. These features are beneficial for determining the mutual orientation between the nuclear spin interaction tensors with improved accuracy.

1H CSA↗

Mechanisms in the Synthesis of S -Alcohols with 1,4-NADH Biomimetic Co-factor N-Benzyl-1,4-dihydronicotinamide using Horse Liver Alcohol Dehydrogenase: A Hybrid Computational Study

The enantioselective reduction of prochiral ketones catalyzed by horse liver alcohol dehydrogenase (HLADH), was investigated via a hybrid computational approach, for molecular reactions involved in chiral synthesis of S-alcohols, when the natural co-factor, 1,4-dihyronicotinamide adenine dinucleotide, 1,4-NADH, was replaced with biomimetic co-factor, N-benzyl-1,4-dihydronicotinamide, 1. We surmised that different hydride and proton transfer mechanisms were involved using co-factor, 1. An alternative mechanism, where the hydride transfer step occurred, via an η 1 -keto-S-η 2 -5,6-1,4-dihydronicotinamide-Zn(II) complex, was previously investigated with a model of the HLADH-Zn(II) catalytic site (J. Organometal. Chem. 2021, 943, 121810). Presently, we studied canonical and alternative mechanisms compared to models of the entire enzyme structure. We disproved the η 2 -Zn(II) complex, and discovered a canonical hydride transfer from biomimetic 1,4-NADH, 1, to the Zn(II) bound prochiral ketone substrate, followed by a new proton relay, consisting of a water chain connecting His51 to Ser48 that accomplished the S-alkoxy anion's protonation to yield the final S-alcohol product. The HLADH catalysis, with biomimetic co-factor, 1, that replaced the ribose group, the 5'-diphosphate groups, and the adenine nucleotide with a N-benzyl group, has provided a new paradigm for the design of other structures of 1,4-NADH biomimetic co-factors, including their economic value in biocatalysis reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Codesigning Alloy Compositions of CdSe y Te 1− y Absorbers and Mg x Zn 1− x O Contacts to Increase Solar Cell Efficiency

Thin‐film solar cells such as CdTe are a major commercial photovoltaic technology, with more than 25 GW installed worldwide and levelized costs of electricity competitive with fossil fuels. Further progress may result from integrating CdSe y Te 1− y absorbers with Mg x Zn 1− x O contacts, but the device efficiency is difficult to maximize due to coupled dependence on chemical composition of both alloys. Herein, a high‐throughput approach is demonstrated to codesign chemical compositions in alloyed Mg x Zn 1− x O/CdSe y Te 1− y thin‐film solar cells, using combinatorial libraries of PV devices with orthogonal composition gradients in CdSe y Te 1− y absorbers and Mg x Zn 1− x O contacts. It is found that the solar cell performance is a strong and coupled function of both elemental compositions, with efficiency up to 17.7% ( V OC = 836 mV, fill factor = 69%, J SC = 30.6 mA cm −2 ) at atomic compositions of Mg/(Mg + Zn) ≈18% and average Se/(Se + Te) ≈4%. These performance trends among >100 devices are explained by >100 ns lifetime of photoexcited charge carriers at the Mg x Zn 1− x O/CdSe y Te 1− y interface where strong Se accumulation is also observed. This study reports the optimal compositions of the commercially relevant Mg x Zn 1− x O/CdSe y Te 1− y solar cells and demonstrates a general approach to codesigning performance of alloyed thin‐film solar cells and other optoelectronic devices.

14 SOLAR ENERGY↗

Increased inflammation as well as decreased endoplasmic reticulum stress and translation differentiate pancreatic islets from donors with pre-symptomatic stage 1 type 1 diabetes and non-diabetic donors

Aims/hypothesis Progression to type 1 diabetes is associated with genetic factors, the presence of autoantibodies and a decline in beta cell insulin secretion in response to glucose. Very little is known regarding the molecular changes that occur in human insulin-secreting beta cells prior to the onset of type 1 diabetes. Herein, we applied an unbiased proteomics approach to identify changes in proteins and potential mechanisms of islet dysfunction in islet-autoantibody-positive organ donors with pre-symptomatic stage 1 type 1 diabetes (HbA1c ≤42 mmol/mol [6.0%]). We aimed to identify pathways in islets that are indicative of beta cell dysfunction. Methods Multiple islet sections were collected through laser microdissection of frozen pancreatic tissues from organ donors positive for single or multiple islet autoantibodies (AAb + , n=5), and age (±2 years)- and sex-matched non-diabetic (ND) control donors (n=5) obtained from the Network for Pancreatic Organ donors with Diabetes (nPOD). Islet sections were subjected to MS-based proteomics and analysed with label-free quantification followed by pathway and functional annotations. Results Analyses resulted in ~4500 proteins identified with low false discovery rate (<1%), with 2165 proteins reliably quantified in every islet sample. We observed large inter-donor variations that presented a challenge for statistical analysis of proteome changes between donor groups. We therefore focused on only the donors with stage 1 type 1 diabetes who were positive for multiple autoantibodies (mAAb + , n=3) and genetic risk compared with their matched ND controls (n=3) for the final statistical analysis. Approximately 10% of the proteins (n=202) were significantly different (unadjusted p<0.025, q<0.15) for mAAb + vs ND donor islets. The significant alterations clustered around major functions for upregulation in the immune response and glycolysis, and downregulation in endoplasmic reticulum (ER) stress response as well as protein translation and synthesis. The observed proteome changes were further supported by several independent published datasets, including a proteomics dataset from in vitro proinflammatory cytokine-treated human islets and single-cell RNA-seq datasets from AAb + individuals. Conclusions/interpretation In situ human islet proteome alterations in stage 1 type 1 diabetes centred around several major functional categories, including an expected increase in immune response genes (elevated antigen presentation/HLA), with decreases in protein synthesis and ER stress response, as well as compensatory metabolic response. The dataset serves as a proteomics resource for future studies on beta cell changes during type 1 diabetes progression and pathogenesis. Data availability The LC-MS raw datasets that support the findings of this study have been deposited in the online repository: MassIVE (https://massive.ucsd.edu/ProteoSAFe/static/massive.jsp) with accession no. MSV000090212.

Autoantibody-positive↗

Enhanced Low-Temperature Thermoelectric Performance in (PbSe) 1+δ (VSe 2 ) 1 Heterostructures due to Highly Correlated Electrons in Charge Density Waves

We explore the effect of charge density wave (CDW) on the in-plane thermoelectric transport properties of (PbSe) 1+δ (VSe 2 ) 1 and (PbSe) 1+δ (VSe 2 ) 2 heterostructures. In (PbSe) 1+δ (VSe 2 ) 1 we observe an abrupt 86% increase in the Seebeck coefficient, 245% increase in the power factor, and a slight decrease in resistivity over the CDW transition. This behavior is not observed in (PbSe) 1+δ (VSe 2 ) 2 and is rather unusual compared to the general trend observed in other materials. The abrupt transition causes a deviation from the Mott relationship through correlated electron states. Raman spectra of the (PbSe) 1+δ (VSe 2 ) 1 material show the emergence of additional peaks below the CDW transition temperature associated with VSe 2 material. Temperature-dependent in-plane X-ray diffraction (XRD) spectra show a change in the in-plane thermal expansion of VSe 2 in (PbSe) 1+δ (VSe 2 ) 1 due to lattice distortion. Here, the increase in the power factor and decrease in the resistivity due to CDW suggest a potential mechanism for enhancing the thermoelectric performance at the low temperature region.

36 MATERIALS SCIENCE↗

Gas-Phase Formation of 1,3,5,7-Cyclooctatetraene (C 8 H 8 ) through Ring Expansion via the Aromatic 1,3,5-Cyclooctatrien-7-yl Radical (C 8 H 9 • ) Transient

Gas-phase 1,3,5,7-cyclooctatetraene (C 8 H 8 ) and triplet aromatic 1,3,5,7-cyclooctatetraene (C 8 H 8 ) were formed for the first time through the bimolecular methylidyne radicals (CH) - 1,3,5-cycloheptatriene (C 7 H 8 ) reactions under single collision conditions on the doublet surface. The reaction involves methylidyne radical addition to the olefinic pi electron system of 1,3,5-cycloheptatriene followed by isomerization and ring expansion to aromatic 1,3,5-cyclooctatrien-7-yl radical (C 8 H 9 •). The chemically activated doublet radical intermediate undergoes unimolecular decomposition to 1,3,5,7-cyclooctatetraene. Substituted 1,3,5,7-cyclooctatetraene molecules can be prepared in the gas phase with hydrogen atom(s) in the 1,3,5-cycloheptatriene reactant being replaced by organic side groups. Furthermore, these findings are also of potential interest to organometallic chemists by expanding the synthesis of exotic transition metal complexes incorporating substituted 1,3,5,7-cyclooctatetraene dianion (C 8 H 8 2- ) ligands and to untangle the unimolecular decomposition of chemically activated and substituted 1,3,5-cyclooctatrien-7-yl radical eventually gaining a fundamental insight of their bonding chemistry, electronic structures, and stabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A crossed molecular beams and computational study on the unusual reactivity of banana bonds of cyclopropane (c-C 3 H 6 ; X 1 A$^{'}_{1}$ ) through insertion by ground state carbon atoms (C( 3 P j ))

The mechanism and chemical dynamics of the reaction of ground electronic state atomic carbon C( 3 P j ) with cyclopropane c-C 3 H 6 (X 1 A$^{'}_{1}$) have been explored by combining crossed molecular beams experiments with electronic structure calculations of the pertinent triplet C 4 H 6 potential energy surface and statistical computations of product branching ratios under single-collision conditions. The experimental findings suggest that the reaction proceeds via indirect scattering dynamics through triplet C 4 H 6 reaction intermediate(s) leading to C 4 H 5 product(s) plus atomic hydrogen via a tight exit transition state, with the overall reaction exoergicity evaluated as 231 ± 52 kJ mol –1 . The calculations indicate that C( 3 P j ) can easily insert into one of the three equivalent C–C ‘banana’ bonds of cyclopropane overcoming a low barrier of only 2 kJ mol –1 following the formation of a van der Waals reactant complex stabilized by 15 kJ mol –1 . The carbon atom insertion into one of the six C–H bonds is also feasible via a slightly higher barrier of 5 kJ mol –1 . Here, these results highlight an unusual reactivity of cyclopropane's banana C–C bonds, which behave more like unsaturated C–C bonds with a π-character than saturated σ C–C bonds, which are known to be generally unreactive toward the ground electronic state atomic carbon such as in ethane (C 2 H 6 ). The statistical theory predicts the overall product branching ratios at the experimental collision energy as 50% for 1-butyn-4-yl, 33% for 1,3-butadien-2-yl, i-C 4 H 5 , and 11% for 1,3-butadien-1-yl, n-C 4 H 5 , with i-C 4 H 5 (230 kJ mol –1 below the reactants) favored by the C–C insertion providing the best match with the experimentally observed reaction exoergicity. The C( 3 P j ) + c-C 3 H 6 reaction is predicted to be a source of C 4 H 5 radicals under the conditions where its low entrance barriers can be overcome, such as in planetary atmospheres or in circumstellar envelopes but not in cold molecular clouds. Both i- and n-C 4 H 5 can further react with acetylene eventually producing the first aromatic ring and hence, the reaction of the atomic carbon with c-C 3 H 6 can be considered as an initial step toward the formation of benzene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanism of mixed-linkage glucan biosynthesis by barley cellulose synthase–like CslF6 (1,3;1,4)-β-glucan synthase

Mixed-linkage (1,3;1,4)-β-glucans, which are widely distributed in cell walls of the grasses, are linear glucose polymers containing predominantly (1,4)-β-linked glucosyl units interspersed with single (1,3)-β-linked glucosyl units. Their distribution in cereal grains and unique structures are important determinants of dietary fibers that are beneficial to human health. We demonstrate that the barley cellulose synthase-like CslF6 enzyme is sufficient to synthesize a high–molecular weight (1,3;1,4)-β-glucan in vitro. Biochemical and cryo–electron microscopy analyses suggest that CslF6 functions as a monomer. A conserved “switch motif” at the entrance of the enzyme’s transmembrane channel is critical to generate (1,3)-linkages. There, a single-point mutation markedly reduces (1,3)-linkage formation, resulting in the synthesis of cellulosic polysaccharides. Our results suggest that CslF6 monitors the orientation of the nascent polysaccharide’s second or third glucosyl unit. Register-dependent interactions with these glucosyl residues reposition the polymer’s terminal glucosyl unit to form either a (1,3)- or (1,4)-β-linkage.

59 BASIC BIOLOGICAL SCIENCES↗

Enhancing and Extinguishing the Different Emission Features of 2D (EA(1-)(x)FA(x))(4)Pb3Br10 Perovskite Films

2D hybrid perovskites are attractive for optoelectronic devices. In thin films, the color of optical emission and the texture of crystalline domains are often difficult to control. Here, a method for extinguishing or enhancing different emission features is demonstrated for the family of 2D Ruddlesden-Popper perovskites (EA(1-)(x)FA(x))(4)Pb3Br10 (EA = ethylammonium, FA = formamidinium). When grown from aqueous hydrobromic acid, crystals of (EA(1-)(x)FA(x))(4)Pb3Br10 retain all the emission features of their parent compound, (EA)(4)Pb3Br10. Surprisingly, when grown from dimethylformamide (DMF), an emission feature, likely self-trapped exciton (STE), near 2.7 eV is missing. Extinction of this feature is correlated with DMF being incorporated between the 2D Pb-Br sheets, forming (EA(1-)(x)FA(x))(4)Pb3Br10 center dot(DMF)(y). Without FA, films grown from DMF form (EA)(4)Pb3Br10, retain little solvent, and have strong emission near 2.7 eV. Slowing the kinetics of film growth strengthens a different emission feature, likely a different type of STE, which is much broader and present in all compositions. Films of (EA(1-)(x)FA(x))(4)Pb3Br10 center dot(DMF)(y) have large, micron-sized domains and homogeneous orientation of the semiconducting sheets, resulting in low electronic disorder near the absorption edge. The ability to selectively strengthen or extinguish different emission features in films of (EA(1-)(x)FA(x))(4)Pb3Br10 center dot(DMF)(y) reveals a pathway to tune the emission color in these compounds.

2D halide perovskites↗

Internal Conversion between Bright (1 1 B $^+_u$) and Dark (21 A $^-_g$) States in s- trans -Butadiene and s- trans -Hexatriene

Internal conversion (IC) between the two lowest singlet excited states, 1 1 B$_u^+$ and 2 1 A$_g^–$, of s-trans-butadiene and s-trans-hexatriene is investigated using a series of single- and multi- reference wave function and density functional theory (DFT) methodologies. Three independent types of the equation-of-motion coupled-cluster (EOMCC) theory capable of providing an accurate and balanced description of one- as well as two-electron transitions, abbreviated as δ-CR-EOMCC(2,3), DIP-EOMCC(4h2p){N o }, and DEA-EOMCC(4p2h){N u } or DEA-EOMCC(3p1h,4p2h){N u }, consistently predict that the 1 1 B$_u^+$/2 1 A$_g^–$ crossing in both molecules occurs along the bond length alternation coordinate. However, the analogous 1 1 B$_u^+$ and 2 1 A$_g^–$ potentials obtained with some multireference approaches, such as CASSCF and MRCIS(D), as well as with the linear-response formulation of time-dependent DFT (TDDFT), do not cross. Hence, caution needs to be exercised when studying the low-lying singlet excited states of polyenes with conventional multiconfigurational methods and TDDFT. The multistate many-body perturbation theory methods, such as XMCQDPT 2 , do correctly reproduce the curve crossing. Among the simplest and least expensive computational methodologies, the DFT approaches that incorporate the contributions of doubly excited configurations, abbreviated as MRSF (mixed reference spin-flip) TDDFT and SSR( 4,4 ), accurately reproduce our best EOMCC results. This is highly promising for nonadiabatic molecular dynamics simulations in larger systems.

36 MATERIALS SCIENCE↗

Shock‐tube spectroscopic water measurements and detailed kinetics modeling of 1‐pentene and 3‐methyl‐1‐butene

Abstract To understand the effects of the chemical structure of two C 5 alkene isomers on their combustion properties, and to highlight the major chemical reactions occurring during their high‐temperature oxidation, water time histories were measured behind reflected shock waves for the oxidation of 1‐pentene (C 5 H 10 ‐1) and 3‐methyl‐1‐butene (3M1B) in 99.5% Ar. The experiments were carried out at three different equivalence ratios ( φ = 0.5, 1.0, and 2.0) at pressures and temperatures ranging from 1.29 to 1.47 atm and 1 331 to 1 877 K, respectively. The H 2 O quantification extends the database for 1‐pentene and provides new insights for 3M1B. These unique results were used to validate and to develop a new detailed kinetics model. Numerical predictions are presented, and the new model was able to capture the results with suitable accuracy, with 3M1B being notably more reactive than C 5 H 10 ‐1. Sensitivity and rate‐of‐production analyses were performed to help explain the results. Under the present conditions, the reactivity is rapidly initiated by molecular dissociation of a fraction of the pentene isomers. The initiation phase then induces H‐atom abstraction by active radicals (H, OH, O, HO 2 , and CH 3 ) to first produce alkenyl C 5 H 9 radicals (or an alkyl radical and an alkenyl radical by breaking a C─C bond) and subsequent, smaller fragments. The difference in terms of reactivity between the isomers is essentially due to the fact that 3M1B has one particularly weak tertiary allylic C─H bond, which allows for fast H‐atom abstraction compared with 1‐pentene.

Grégoire, Claire M.↗

Kinetic studies of excited singlet oxygen atom O( 1 D) reactions with ethanol

In this work, themultichannel reaction of excited singlet oxygen atom with ethanol, O( 1 D) + C 2 H 5 OH (1), was studied in a photolysis flow reactor coupled with mid-infrared Faraday rotation spectroscopy (FRS) and UV-IR direct absorption spectroscopy (DAS) at 297 K with reactor pressures of 60, 120, and 150 Torr (bath He). The excited singlet oxygen atom was generated through the photolysis of O 3 at 266 nm. The photon flux and O( 1 D) concentrations were determined by in situ actinometry based on O 3 depletion. Temporal profiles of OH and H 2 O were monitored via DAS signals at ca. 3568.62 and 3568.29 cm –1 , while temporal profiles of HO 2 were measured via FRS signals at ca. 1396.90 cm –1 . The branching ratios of the target reaction (1) were determined by fitting temporal profiles to simulations from an in-house reaction mechanism. Two major reaction channels were identified as CH 3 CHOH + OH and CH 3 O + CH 2 OH, and their branching ratios were determined as 0.46 ± 0.12 and 0.42 ± 0.11, respectively. A specific HO 2 + RO 2 reaction between HO 2 and O 2 CH 2 CH 2 OH (β-RO 2 ) at the low-temperature range is estimated in this work as HO 2 + O 2 CH 2 CH 2 OH → products with a rate constant of 7 × 10 –12 cm 3 molecule –1 s –1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗