SEARCH · Search NASA

Results for “ILLUMINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS2005

Outgassing Measurements for Three Materials, Combined with Vacuum Ultraviolet Radiation Illumination of the Volatile Condensable Materials

The photolysis of three organic materials, by vacuum ultraviolet (VUV) radiation, has been quantified using 15-MHz temperature-controlled quartz microbalances (TQCM's). The rate at which molecular species, released from the individual samples, condensed on two TQCM s was measured for periods of up to 139.9-hours. The individual samples were heated in an effusion cell and the emitted molecular species collected on a pair of TQCM's which were maintained at -40 degrees Celsius. At several points during the deposition measurement, the deposition surface of one TQCM was illuminated by a 30 Watt deuterium lamp, and the loss of material from that surface was observed. V W illumination of the TQCM, concurrent with condensation, reduced the rate that material was lost from the deposition surface. These measurements present a contrasting picture of molecular deposition, in the presence of VUV, to that presented by other investigators who observed an enhanced rate of molecular deposition, when the deposition surface was illuminated by VUV.

Albyn, Keith↗

NASA NTRS2009

Improved Starting Materials for Back-Illuminated Imagers

An improved type of starting materials for the fabrication of silicon-based imaging integrated circuits that include back-illuminated photodetectors has been conceived, and a process for making these starting materials is undergoing development. These materials are intended to enable reductions in dark currents and increases in quantum efficiencies, relative to those of comparable imagers made from prior silicon-on-insulator (SOI) starting materials. Some background information is prerequisite to a meaningful description of the improved starting materials and process. A prior SOI starting material, depicted in the upper part the figure, includes: a) A device layer on the front side, typically between 2 and 20 m thick, made of p-doped silicon (that is, silicon lightly doped with an electron acceptor, which is typically boron); b) A buried oxide (BOX) layer (that is, a buried layer of oxidized silicon) between 0.2 and 0.5 m thick; and c) A silicon handle layer (also known as a handle wafer) on the back side, between about 600 and 650 m thick. After fabrication of the imager circuitry in and on the device layer, the handle wafer is etched away, the BOX layer acting as an etch stop. In subsequent operation of the imager, light enters from the back, through the BOX layer. The advantages of back illumination over front illumination have been discussed in prior NASA Tech Briefs articles.

Pain, Bedabrata↗

NASA NTRS2010

An Illumination Correction ALgorithm on Landsat-TM Data

In this paper, a new illumination correction model, the rotation model, is introduced. The model is based on the empirical correlation between reflectance and the illumination condition (IL). The model eliminates the dependency of reflectance on IL through rotating the data in IL-reflectance space. This model is compared with widely used cosine model and C model over a sample forest region. We found that the newly developed rotation model consistently performs best on both atmospheric uncorrected and corrected Landsat images. Index Terms Landsat, illumination correction, change detection, LEDAPS

Tan, Bin↗

NASA NTRS1973

System description and operating guide for DSAS illumination and moon conflict programs

The DSAS Illumination and Moon Conflict programs are described which during an orbit when the DSAS (Digital Solar Aspect Sensor) will record the direct rays of the sun, and the periods of time when the horizon scanners will come in conflict with the moon. The DSAS Illumination Program makes use of an orbit tape (or epoch time and orbital elements) in addition to an ephemeris tape containing positions of the sun and moon. The Moon Conflict Program makes use of the same ephemeris tape with sun and moon positions, but uses only epoch time and orbital elements for the satellite positions. These programs were designed for the TIROS or ITOS series spacecraft but may be utilized by any spacecraft with similar sensors.

Dunker, S. C.↗

NASA NTRS1974

Temperature, illumination, and fluence dependence of current and voltage in electron irradiated solar cells

Empirical equations have been derived from measurements of solar cell photovoltaic characteristics relating light-generated current and open circuit voltage to cell temperature, intensity of illumination and 1-MeV electron fluence. Both 2-ohm-cm and 10-ohm-cm cells were tested over the temperature range from 120 to 470 K, the illumination intensity range from 5 to 1830 mW/sq cm, and the electron fluence range from 1 x 10 to the 13th to 1 x 10 to the 16th electrons/sq cm. The normalized temperature coefficient of the light generated current varies as the 0.18 power of the fluence for temperatures above approximately 273 K and is independent of fluence at lower temperatures. At 140 mW/sq cm, a power law expression was derived which shows that the light-generated current decreases at a rate proportional to the 0.153 power of the fluence for both resistivities. The coefficient of the expression is larger for 2-ohm-cm cells; consequently, the advantage for 10-ohm-cm cells increased with increasing fluence.

Faith, T. J.↗

NASA NTRS1977

Effects of illumination on the conductivity properties of spacecraft insulating materials

Experimental data on the dark and illuminated conductivities of Kapton V and polyvinylidene fluoride (PVF2) films are described as well as the changes in insulating properties produced in Kapton H, Kapton V, PVF2, and FEP Teflon films as result of prolonged exposure to solar illumination. An overall summary of the results of tests is presented. A general introduction and a description of the experimental apparatus and procedures used are also given.

Adamos, R. C.↗

NASA NTRS1976

Microwave holographic imaging of aircraft with spaceborne illuminating source

The conceptual development of a method for the high angular resolution and accurate angular position estimates for the surveillance and traffic control of aircraft is considered. A target volume several hundred kilometers in diameter is illuminated by a CW microwave source located on a satellite in geosynchronous orbit. Signals are received by a large array of random, conformally located receiving elements. Each element receives the direct signal from the satellite plus signals reflected from aircraft in the illuminated volume. Coherent combination of the signals received from the individual elements permits the equivalent of holographic imaging or multiple beam formation from which the useful target data can be obtained.

Berkowitz, R. S.↗

NASA NTRS1977

Significance of operator variation and the angle of illumination in lineament analysis on synoptic images

The significance of operator variation and the angle of illumination in acquired imagery is analyzed for lineament analysis. Five operators analyzed a LANDSAT image and four photographs of a plastic relief map illuminated at a low angle from varying directions of the Prescott, Arizona region. Significant differences were found in both number and length of the lineaments recognized by the different investigators for the images. The actual coincidence of lineaments recognized by the investigators for the same image is exceptionally low. Even the directional data on lineament orientation is significantly different from operator to operator and from image to image. Cluster analysis of the orientation data displays a clustering by operators rather than by images. It is recommended that extreme caution be taken before attempting to compare different investigators' results in lineament analysis.

Siegal, B. S.↗

NASA NTRS1977

A first order theory of the p/+/-n-n/+/ edge-illuminated silicon solar cell at very high injection levels

A first order theory of the edge-illuminated p(+)-n-n(+) silicon solar cell under very high injection levels has been derived. The very high injection level illuminated J-V characteristic is derived for any general base width to diffusion length (W/L) ratio and it includes the minority carrier reflection by the n-n(+) high-low junction. The beneficial effects of the high-low junction are shown to be significant until extremely high injection levels are reached. The theoretical dependencies of Jsc and Voc on temperature, incident intensity, and base resistivity are derived and discussed in detail. Some experimental results are given and these are discussed in relation to the theory.

Goradia, C.↗

NASA NTRS1981

Optical Fiber Illumination System for visual flight simulation

An electronically controlled lighting system simulating runway, aircraft carrier, and landing aid lights for flight simulations is described. The various colored lights that would be visible to a pilot by day, at dusk, or at night are duplicated at the distances the lights would normally become visible. Plastic optical fiber illuminators using tungsten halogen lights are distributed behind the model. The tips of the fibers of illuminators simulating runway lights are bevelled in order that they may be seen from long distances and at low angles. Fibers representing taxiway lights are pointed and polished for omni-directional visibility. The electronic intensity controls, which can be operated either manually or remotely, regulate the intensity of the lights to simulate changes in distance. A dichronic mirror, infrared filter system is used to maintain color integrity.

Hollow, R. H.↗

NASA NTRS1981

Canopy reflectance as influenced by solar illumination angle

The interaction of the solar illumination angle and row azimuth angle of the measured reflectance factor (RF) of soybean canopies was investigated. Diurnal changes of nearly 140% were observed in the red wavelength region when canopies covered 64% of the soil. The amount of shadow observed was a function of the plant geometry and row width. As soil cover approached 100%, the diurnal changes diminished. A function tht describes the solar illumination angle with respect to the row azimuth explained most of the diurnal variation in the measured RF. Variation in near infrared response was much less and did not appear to be as strongly related to Sun-row angle interactions. The near infrared/red ratio was highly sensitive to Sun angle-row direction interactions, whereas the greenness function, utilizing all four spectral bands, was not.

Bauer, M. E.↗

NASA NTRS1982

Soybean canopy reflectance as a function of view and illumination geometry

The results of an experiment designed to characterize a soybean field by its reflectance at various view and illumination angles and by its physical and agronomic attributes are presented. Reflectances were calculated from measurements at four wavelength bands through eight view azimuth and seven view zenith directions for various solar zenith and azimuth angles during portions of three days. An ancillary data set consisting of the agronomic and physical characteristics of the soybean field is described. The results indicate that the distribution of reflectance from a soybean field is a function of the solar illumination and viewing geometry, wavelength and row direction, as well as the state of development of the canopy. Shadows between rows greatly affected the reflectance in the visible wavelength bands and to a lesser extent in the near infrared wavelengths. A model is proposed that describes the reflectance variation as a function of projected solar and projected viewing angles. The model appears to approximate the reflectance variations in the visible wavelength bands from a canopy with well defined row structure.

Bauer, M. E.↗

NASA NTRS1983

Silicon solar cell characterization at low temperatures and low illumination as a function of particulate irradiation

Various configurations of back surface reflector silicon solar cells including small (2 x 2) cm and large (approx. 6 x 6) cm cells with conventional and wraparound contacts were subjected to 1 MeV electron irradiation and characterized under both Earth orbital and deep space conditions of temperatures and illuminations. Current-Voltage (I-V) data were generated from +65 C to -150 C and at incident illuminations from 135.3 mW/sq cm to 5.4 mW/sq cm for these cells. Degradation in cell performance which is manifested only under deep space conditions is emphasized. In addition, the effect of particle irradiation on the high temperature and high intensity and low temperature and low intensity performance of the cells is described. The cells with wraparound contacts were found to have lower efficiencies at Earth orbital conditions than the cells with conventional contacts.

Whitaker, A. F.↗

NASA NTRS1983

Illuminated push-button switch

An illuminated push-button switch is described. It is characterized by the fact that is consists of a switch group, an operator button opening and closing the switch group, and a light-emitting element which illuminates the face of the operator button.

Iwagiri, T.↗

NASA NTRS1984

Analysis of SIR-B radar illumination of geometry for depth of penetration and surface feature and vegetation detection, Nevada and California

The measurement capability provided by the Shuttle Imaging Radar (SIR-B) was used to determine: (1) the relationships between radar illumination geometry and depth of penetration in different climatic and physiographic environments in Nevada; and, (2) the relationships between radar illumination geometry and detection and analysis of structural features in different climatic and physiographic environments in Nevada.

Taranik, J. V.↗

NASA NTRS1989

Illumination requirements for orbital SAR - Experience from SIR-B Canadian Shield experiments

Synthetic aperture radar illumination requirements for accurate rendition of geological structure in low-relief regions of uniform radar roughness are considered, along with the effect of illumination azimuth biasing. Results of two Shuttle imaging radar Canadian Shield experiments are discussed with emphasis on look azimuth, look direction, and look angle. It is found out that at least two look azimuths, preferably orthogonal, are essential for adequate rendition of regional structure of the area, while four nearly-orthogonal looks are necessary to compensate for slope orientation. This can be accomplished by orbital design with crossing ground tracks or utilizing a squint mode. Attention is given to the acquisition of coverage from look directions 180 deg apart and to multiple look angles desirable for geological applications.

Lowman, P. D.↗

NASA NTRS1990

Long duration exposure facility solar illumination data package

A post flight solar illumination data package was created by the LDEF thermal analysis data group in support of the LDEF science office data group. The data presented was prepared with the Thermal Radiation Analysis System (TRASYS) program. Ground tracking data was used to calculate daily orbital beta angles for the calculation of resultant fluxes. This data package will be useful in calculation of solar illumination fluent for a variety of beta angle orbital conditions encountered during the LDEF mission.

Berrios, William M.↗

NASA NTRS1992

Extraterrestrial applications of solar optics for interior illumination

Solar optics is a terrestrial technology that has potential extraterrestrial applications. Active solar optics (ASO) and passive solar optics (PSO) are two approaches to the transmission of sunlight to remote interior spaces. Active solar optics is most appropriate for task illumination, while PSO is most appropriate for general illumination. Research into solar optics, motivated by energy conservation, has produced lightweight and low-cost materials, products that have applications to NASA's Controlled Ecological Life Support System (CELSS) program and its lunar base studies. Specifically, prism light guides have great potential in these contexts. Several applications of solar optics to lunar base concepts are illustrated.

Eijadi, David A.↗