Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERCEPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Mitigation of ICRF—edge plasma interaction in Alcator C-Mod

The parasitic interaction between ion cyclotron range of frequencies (ICRF) waves and the edge plasma has long limited high-power ICRF utilization in magnetically confined fusion plasmas. In this paper, we report on the successful mitigation of this interaction by power tapering a four-strap field-aligned (FA) antenna in the Alcator C-Mod tokamak. With the antenna operated in dipole phasing ($0\pi0\pi$), the ratio of the power coupled by the central two straps ($P_\mathrm {cent}$) to the power coupled by the outer two straps was varied at fixed total coupled ICRF power ($P_\mathrm {tot}$). With $P_\mathrm {cent}$/$P_\mathrm {tot} \approx 0.8-0.9$, no enhancement of the plasma potential was measured despite 1 MW of coupled ICRF power. When the antenna is powered, energy deposition increases on its four corners and on neighboring limiter tiles magnetically connected to some of those corners. The energy deposited on the antenna and limiter is minimized together with near-field plasma potentials. Additionally, we show that deviation from $P_\mathrm {cent}$/$P_\mathrm {tot} \approx 0.8$ enhances wave-plasma interactions in places not magnetically connected to the antenna. These far-field effects are correlated with changes in the antenna spectrum. Hence, on C-Mod, near-field and far-field interactions were minimized for about the same range of $P_\mathrm {cent}$/$P_\mathrm {tot}$. Optimal power tapering was also found to improve ICRF heating efficiency and facilitate H-mode access. Finally, we show that the heat flux pattern on the toroidally aligned antennas reverses with the direction of the RF-induced E×B flow in front of the antenna, a correlation not observed for the FA antenna. We argue that the RF-induced E×B flow, which carries high-density plasma from the near-SOL, is aligned with the FA antenna and does not intercept its corners, where the plasma potential is large. This could explain the previously reported smaller impurity generation by the FA antenna (Wukitch et al 2013 Phys. Plasmas 20 056117).

Alcator C-Mod↗
DOE OSTI2025

Aligning thermal and current quenches with a high density low-Z injection

The conventional approach for thermal quench (TQ) mitigation in a tokamak disruption is through a high- Z impurity injection that radiates away the plasma’s thermal energy before it reaches the wall. The downside is a robust Ohmic-to-runaway current conversion due to the radiatively clamped low post-thermal-quench electron temperature. An alternative approach is to deploy a low- Z (either deuterium or hydrogen) injection that aims to slow down the TQ, and ideally aligns it with the current quench (CQ). This approach has been investigated here via 3D MHD simulations using the PIXIE3D code. By boosting the hydrogen density, a fusion-grade plasma is dilutionally cooled at approximately the original pressure. Energy loss to the wall is controlled by a Bohm outflow condition at the boundary where the magnetic field intercepts a thin plasma sheath at the wall, in addition to Bremsstrahlung bulk losses. Robust MHD instabilities proceed as usual, while the collisionality of the plasma has been greatly increased and parallel transport is now in the Braginskii regime. The main conclusion of this study is that the decreased transport loss along open field lines due to a sufficient low- Z injection slows down the TQ rate to the order of 20 ms, aligned with the CQ timescale for a 15 MA ITER plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Proton reconstruction with the TOTEM Roman pot detectors for high- β * LHC data

The TOTEM Roman pot detectors are used to reconstruct the transverse momentum of scattered protons and to estimate the transverse location of the primary interaction. This paper presents new methods of track reconstruction, measurements of strip-level detection efficiencies, cross-checks of the LHC beam optics, and detector alignment techniques, along with their application in the selection of signal collision events. The track reconstruction is performed by exploiting hit cluster information through a novel method using a common polygonal area in the intercept-slope plane. The technique is applied in the relative alignment of detector layers with μm precision. A tag-and-probe method is used to extract strip-level detection efficiencies. The alignment of the Roman pot system is performed through time-dependent adjustments, resulting in a position accuracy of 3 μm in the horizontal and 60 μm in the vertical directions. The goal is to provide an optimal reconstruction tool for central exclusive physics analyses based on the high-β* data-taking period at $\sqrt({s})$ = 13 TeV in 2018.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Effectiveness of street trees in reducing air temperature and outdoor heat exposure in Las Vegas

Urban greening and especially tree planting strategies are being widely planned and implemented to mitigate urban overheating and thermal stress in many urban areas. However, the effectiveness of these strategies depends on multiple factors, including urban morphology, environmental conditions, and tree characteristics. This study investigates the effects of street tree planting strategies on air temperature and outdoor heat exposure in Las Vegas by combining an urbanized mesoscale climate model coupled to a multi-layer street tree model (Weather Research and Forecasting-BEP-Tree; Δ x = 900 m) with a microscale pedestrian heat exposure model (Temperatures of Urban Facets for Pedestrian; Δ x = 1 m). A series of simulations are conducted for July and August 2022. Large city-wide increases of a drought tolerant tree species cool air temperature mainly during the nighttime (up to 1.5 °C), with daytime effects being limited due to leaves shedding sensible instead of latent heat as stomata close in response to high vapor pressure deficits. Increased evaporative cooling is achieved with a different tree species (double at night, and reaching 0.4 °C during the day), but water requirements increase threefold. Despite their relatively small effect on air temperature during the day, trees provide significant shade by intercepting solar radiation, reducing mean radiant temperature (up to 16 °C) and enhancing outdoor thermal comfort, a major benefit of street trees in hot arid climates. The nighttime cooling of trees and the daytime reduction of radiant loading show potential to reduce the heat-related health impacts. Our results highlight the need to evaluate the effects of street trees on a case-by-case basis.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Demonstration of a code coupling framework for modeling beam-collimator impacts in the advanced photon source

The high-brightness beams being produced in current and future accelerators present new machine protection concerns with the potential for high-energy-density (HED) conditions ( >100 J/mm 3 ) in beam-intercepting components. Simulating HED conditions in accelerators requires utilizing a suite of physics codes for particle dynamics, particle-matter interactions, and hydrodynamics. This paper describes a method of coupling the codes elegant, fluka, and flash to simulate the effects of a rapid beam loss in the advanced photon source storage ring and the resulting interaction of the beam and collimators. This paper expands previous work [J. Dooling et al., Collimator irradiation studies at the advanced photon source, in Proceedings of the IBIC-2023 (2023), pp. 245–249] by introducing a definition of the evolving geometry of the collimator surface as well as providing methods for simulating the absorption of synchrotron radiation and tracking shower particles produced during beam strikes. We demonstrate this framework by simulating machine conditions of the APS ring before and after its recent upgrade. Simulation results are compared with observed damage to collimators and test samples taken from the APS ring.

Accelerator/storage ring control systems↗
DOE OSTI2026

FitCache: A Transparent Drop-In Framework for Multi-Tier Caching to Accelerate Distributed Deep Learning Workloads

Training in Deep learning (DL) remains highly compute- and data-intensive, with I/O becoming a critical bottleneck as models and datasets scale. Recent studies report that data loading can dominate training time, especially on large-scale HPC systems with shared parallel file systems (PFS). Existing caching approaches either rely on single-tier designs or require intrusive modifications to training pipelines, limiting their portability and effectiveness. In this work, we present FitCache, a transparent drop-in framework for multi-tier caching to accelerate distributed DL training by coordinating fast local memory (e.g., DRAM, Persistent Memory (PMem)) and NVMe as hierarchical caches atop PFS. Our design adapts to hardware diversity, i.e., if NVMe is missing, memory transparently acts as a caching tier, ensuring stable performance. FitCache transparently intercepts I/O requests and issues concurrent fetches across all tiers, returning data from the fastest responder without centralized metadata or static redirection paths. FitCache adapts to dynamic workloads and heterogeneous clusters while maintaining POSIX compatibility. Experiments on Frontier (2048 GPUs) and smaller research clusters show that FitCache reduces training time by up to 40% and per-batch I/O latency by up to 71.6% compared to Lustre Orion PFS, offering a drop-in solution for scalable DL training.

Hu, Guangxing [ORNL] (ORCID:0009000283203614)↗
DOE OSTI2026

A Linear Programming Approach to Backtracking for Single-Axis Trackers on Rolling Terrain

In this article, we present a computationally efficient method for determining optimal backtracking rotations for single-axis solar trackers on nonuniform terrain. The method allows for ganged tracking, mechanical rotation constraints, uneven row spacing, and arbitrary maximum allowable shaded fractions (to enable “fractional backtracking”). As with previous 2-D approaches, the method is suitable for terrain that varies in the transverse direction with respect to the rotation axis of the trackers. The novelty of the method lies in formulating the problem of shade avoidance as a linear problem, which is achieved by using the row interception width as the optimization variable instead of rotation angles. Formulating backtracking as a linear problem enables the use of extremely efficient linear programming algorithms, making the method highly scalable, requiring less than 1 min to compute optimal rotation schedules for hundreds of trackers. It also produces more effective backtracking rotations, reducing the frequency of shading by 4× and improving system energy output by 1%–2%.

Optimization↗
DOE OSTI2024

Dispatching Grid-Forming Inverters in Grid-Connected and Islanded Mode

This paper explores the dispatchability of grid-forming (GFM) inverters in grid-connected and islanded mode. GFM inverters usually use droop control to automatically share power with other GFM sources (inverters and synchronous generators) and follow the change in the load demand; however, they can be dispatched like their grid-following (GFL) counterparts to output the target active and reactive power. This will help grid operators better manage their inverter-based resources (IBRs) to improve operation efficiency and reliability; therefore, this paper proposes an innovative concept of dispatching GFM sources (inverters and synchronous generators) to output the target power in both grid-connected and islanded mode by adjusting their droop intercepts. The fundamental principle is that the GFM inverter's active and reactive power is dictated by its frequency and voltage, and thus dispatching the active and reactve power of a GFM inverter can be achieved through dispatching its frequency and voltage. Moreover, the concept distinguishes the dispatch rules for grid-connected and islanded mode. Finally, the concept is validated with an example microgrid system with two GFM inverters, one diesel generator, one GFL inverter, and the load in both grid-connected and islanded mode. This pioneering work results in practical guidance for the development of energy management systems for future electric grids with GFM and GFL inverters.

dispatching↗
DOE OSTI2024

Search for baryon junctions in e+A collisions at the electron ion collider

Constituent quarks in a nucleon are the essential elements in the standard “quark model” associated with the electric charge, spin, mass, and baryon number of a nucleon. Quantum chromodynamics (QCD) describes nucleon as a composite object containing current quarks (valence quarks and sea (anti-)quarks) and gluons. These subatomic elements and their interactions are known to contribute in complex ways to the overall nucleon spin and mass. In the early development of QCD theory in the 1970s, an alternative hypothesis postulated that the baryon number might manifest itself through a non-perturbative configuration of gluon fields forming a Y-shaped topology known as the gluon junction. In this work, we propose to test such hypothesis by measuring (i) the Regge intercept of the net-baryon distributions for e+(p)Au collisions, (ii) baryon and charge transport in the isobaric ratio between e+Ru and e+Zr collisions, and (iii) target flavor dependence of proton and antiproton yields at large rapidity, transported from the hydrogen and deuterium targets in e+p(d) collisions. Our study indicates that these measurements at the EIC can help determine what carries the baryon number.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

2013 Metropolitan Area Planning Agency External Travel Survey

# 2013 Metropolitan Area Planning Agency External Travel Survey The 2013 Metropolitan Area Planning Agency (MAPA) External Travel Survey was conducted to measure and identify travel patterns into, within, and out of the greater Omaha/Council Bluffs metropolitan area in Nebraska. MAPA sponsored the survey in conjunction with the Federal Highway Administration, the Nebraska Department of Roads, and the Iowa Department of Transportation. ## Data Collection Agency MAPA conducted the survey. ## Methodology The purpose of the survey was to collect information and data needed as input for MAPA’s travel-demand model. The survey employed a combination of nine survey methods and data-collection activities, including Bluetooth technology, intercept surveys, postcard handouts, travel-time studies, vehicle classification counts, and a web-based survey. ## Survey Records Survey records include a total of 729 participants. ## Transportation Data This study provides Bluetooth records and supplementary data for 17,434 passenger trips and 3,123 commercial trips, accounting for 714,218 vehicle miles traveled. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2013 Metropolitan Area Planning Agency External Travel Survey

# 2013 Metropolitan Area Planning Agency External Travel Survey The 2013 Metropolitan Area Planning Agency (MAPA) External Travel Survey was conducted to measure and identify travel patterns into, within, and out of the greater Omaha/Council Bluffs metropolitan area in Nebraska. MAPA sponsored the survey in conjunction with the Federal Highway Administration, the Nebraska Department of Roads, and the Iowa Department of Transportation. ## Data Collection Agency MAPA conducted the survey. ## Methodology The purpose of the survey was to collect information and data needed as input for MAPA’s travel-demand model. The survey employed a combination of nine survey methods and data-collection activities, including Bluetooth technology, intercept surveys, postcard handouts, travel-time studies, vehicle classification counts, and a web-based survey. ## Survey Records Survey records include a total of 729 participants. ## Transportation Data This study provides Bluetooth records and supplementary data for 17,434 passenger trips and 3,123 commercial trips, accounting for 714,218 vehicle miles traveled. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2013 Metropolitan Area Planning Agency External Travel Survey

# 2013 Metropolitan Area Planning Agency External Travel Survey The 2013 Metropolitan Area Planning Agency (MAPA) External Travel Survey was conducted to measure and identify travel patterns into, within, and out of the greater Omaha/Council Bluffs metropolitan area in Nebraska. MAPA sponsored the survey in conjunction with the Federal Highway Administration, the Nebraska Department of Roads, and the Iowa Department of Transportation. ## Data Collection Agency MAPA conducted the survey. ## Methodology The purpose of the survey was to collect information and data needed as input for MAPA’s travel-demand model. The survey employed a combination of nine survey methods and data-collection activities, including Bluetooth technology, intercept surveys, postcard handouts, travel-time studies, vehicle classification counts, and a web-based survey. ## Survey Records Survey records include a total of 729 participants. ## Transportation Data This study provides Bluetooth records and supplementary data for 17,434 passenger trips and 3,123 commercial trips, accounting for 714,218 vehicle miles traveled. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2013 Metropolitan Area Planning Agency External Travel Survey

# 2013 Metropolitan Area Planning Agency External Travel Survey The 2013 Metropolitan Area Planning Agency (MAPA) External Travel Survey was conducted to measure and identify travel patterns into, within, and out of the greater Omaha/Council Bluffs metropolitan area in Nebraska. MAPA sponsored the survey in conjunction with the Federal Highway Administration, the Nebraska Department of Roads, and the Iowa Department of Transportation. ## Data Collection Agency MAPA conducted the survey. ## Methodology The purpose of the survey was to collect information and data needed as input for MAPA’s travel-demand model. The survey employed a combination of nine survey methods and data-collection activities, including Bluetooth technology, intercept surveys, postcard handouts, travel-time studies, vehicle classification counts, and a web-based survey. ## Survey Records Survey records include a total of 729 participants. ## Transportation Data This study provides Bluetooth records and supplementary data for 17,434 passenger trips and 3,123 commercial trips, accounting for 714,218 vehicle miles traveled. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2013 Metropolitan Area Planning Agency External Travel Survey

# 2013 Metropolitan Area Planning Agency External Travel Survey The 2013 Metropolitan Area Planning Agency (MAPA) External Travel Survey was conducted to measure and identify travel patterns into, within, and out of the greater Omaha/Council Bluffs metropolitan area in Nebraska. MAPA sponsored the survey in conjunction with the Federal Highway Administration, the Nebraska Department of Roads, and the Iowa Department of Transportation. ## Data Collection Agency MAPA conducted the survey. ## Methodology The purpose of the survey was to collect information and data needed as input for MAPA’s travel-demand model. The survey employed a combination of nine survey methods and data-collection activities, including Bluetooth technology, intercept surveys, postcard handouts, travel-time studies, vehicle classification counts, and a web-based survey. ## Survey Records Survey records include a total of 729 participants. ## Transportation Data This study provides Bluetooth records and supplementary data for 17,434 passenger trips and 3,123 commercial trips, accounting for 714,218 vehicle miles traveled. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2013 Metropolitan Area Planning Agency External Travel Survey

# 2013 Metropolitan Area Planning Agency External Travel Survey The 2013 Metropolitan Area Planning Agency (MAPA) External Travel Survey was conducted to measure and identify travel patterns into, within, and out of the greater Omaha/Council Bluffs metropolitan area in Nebraska. MAPA sponsored the survey in conjunction with the Federal Highway Administration, the Nebraska Department of Roads, and the Iowa Department of Transportation. ## Data Collection Agency MAPA conducted the survey. ## Methodology The purpose of the survey was to collect information and data needed as input for MAPA’s travel-demand model. The survey employed a combination of nine survey methods and data-collection activities, including Bluetooth technology, intercept surveys, postcard handouts, travel-time studies, vehicle classification counts, and a web-based survey. ## Survey Records Survey records include a total of 729 participants. ## Transportation Data This study provides Bluetooth records and supplementary data for 17,434 passenger trips and 3,123 commercial trips, accounting for 714,218 vehicle miles traveled. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2013 Metropolitan Area Planning Agency External Travel Survey

# 2013 Metropolitan Area Planning Agency External Travel Survey The 2013 Metropolitan Area Planning Agency (MAPA) External Travel Survey was conducted to measure and identify travel patterns into, within, and out of the greater Omaha/Council Bluffs metropolitan area in Nebraska. MAPA sponsored the survey in conjunction with the Federal Highway Administration, the Nebraska Department of Roads, and the Iowa Department of Transportation. ## Data Collection Agency MAPA conducted the survey. ## Methodology The purpose of the survey was to collect information and data needed as input for MAPA’s travel-demand model. The survey employed a combination of nine survey methods and data-collection activities, including Bluetooth technology, intercept surveys, postcard handouts, travel-time studies, vehicle classification counts, and a web-based survey. ## Survey Records Survey records include a total of 729 participants. ## Transportation Data This study provides Bluetooth records and supplementary data for 17,434 passenger trips and 3,123 commercial trips, accounting for 714,218 vehicle miles traveled. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2013 Metropolitan Area Planning Agency External Travel Survey

# 2013 Metropolitan Area Planning Agency External Travel Survey The 2013 Metropolitan Area Planning Agency (MAPA) External Travel Survey was conducted to measure and identify travel patterns into, within, and out of the greater Omaha/Council Bluffs metropolitan area in Nebraska. MAPA sponsored the survey in conjunction with the Federal Highway Administration, the Nebraska Department of Roads, and the Iowa Department of Transportation. ## Data Collection Agency MAPA conducted the survey. ## Methodology The purpose of the survey was to collect information and data needed as input for MAPA’s travel-demand model. The survey employed a combination of nine survey methods and data-collection activities, including Bluetooth technology, intercept surveys, postcard handouts, travel-time studies, vehicle classification counts, and a web-based survey. ## Survey Records Survey records include a total of 729 participants. ## Transportation Data This study provides Bluetooth records and supplementary data for 17,434 passenger trips and 3,123 commercial trips, accounting for 714,218 vehicle miles traveled. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2013 Metropolitan Area Planning Agency External Travel Survey

# 2013 Metropolitan Area Planning Agency External Travel Survey The 2013 Metropolitan Area Planning Agency (MAPA) External Travel Survey was conducted to measure and identify travel patterns into, within, and out of the greater Omaha/Council Bluffs metropolitan area in Nebraska. MAPA sponsored the survey in conjunction with the Federal Highway Administration, the Nebraska Department of Roads, and the Iowa Department of Transportation. ## Data Collection Agency MAPA conducted the survey. ## Methodology The purpose of the survey was to collect information and data needed as input for MAPA’s travel-demand model. The survey employed a combination of nine survey methods and data-collection activities, including Bluetooth technology, intercept surveys, postcard handouts, travel-time studies, vehicle classification counts, and a web-based survey. ## Survey Records Survey records include a total of 729 participants. ## Transportation Data This study provides Bluetooth records and supplementary data for 17,434 passenger trips and 3,123 commercial trips, accounting for 714,218 vehicle miles traveled. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗