Search NASA⌕ Search

SEARCH · Search NASA

Results for “Imperfect interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Tool repairs tube components in situ

Two versions of a portable tool repair the seats of tube fittings and the flared ends of tubing. Each version operates on the principle of lapping to remove imperfections from tube and fitting interfacing surfaces.

Rush, R. E.↗

BOLT II Forebody Surface Measurement Analysis

Surface impression molds of the nosetip/forebody interface, discrete tripping elements, and other surface imperfections were formed on the BOLT II flight vehicle prior to its launch in March 2022. The silicon-rubber molds cast on the interface between the nickel nosetip and the stainless steel forebody were measured using a 3D optical measurement system and a stylus profilometer and were evaluated for step direction and height. The step around the nosetip/forebody interface was found to vary in both magnitude and direction, but values were generally modest with most samples below 60 μm across the span and only two samples, both cast in the gutter, with step values larger than 100 μm. Impressions of the secondary-side tripping elements were strictly scanned with the optical device and similar methods were used to calculate trip height as step height. The measured centerline trip height was 2623 ±12 μm, while the leading-edge, quadrant 2 and 3, trip heights were 897 ±5 μm and 891 ±18 μm, respectively. Surface imperfections on the nose and forebody were also evaluated. Surface roughness values and spectra were estimated, and profiles were extracted across the imperfections to quantify the magnitude of those features.

Trip height↗

Impact of interface materials on side permeation in indirect encapsulation of organic electronics

This work demonstrates the impact of the contact interface between barrier films and adhesives on the side permeation of moisture into packaged devices. When barrier films are brought into contact with the adhesive layer during indirect encapsulation, permeation along defects at this interface can occur due to the imperfect nature of contact, resulting in the formation of pores. The connected network of pores can act as capillaries and be an alternative pathway for water permeation as opposed to the bulk of the adhesive or edge seal materials used for barrier attachment to the package. The rate of water permeation through the capillaries is governed by surface energies of the materials at the interfaces. Experimental results demonstrate that the rate of water permeation is significantly lowered by using materials with higher contact angles at the interface.

36 MATERIALS SCIENCE↗

Comparative electron spin resonance study of epi-Lu{sub 2}O{sub 3}/(111)Si and a-Lu{sub 2}O{sub 3}/(100)Si interfaces: Misfit point defects

An electron spin resonance study has been carried out on heteroepitaxial Si/insulator structures obtained through growth of epi-Lu{sub 2}O{sub 3} films on (111)Si ({approx}4.5% mismatch) by molecular-beam epitaxy, with special attention to the inherent quality as well as the thermal stability of interfaces, monitored through occurring paramagnetic point defects. This indicates the presence, in the as-grown state, of P{sub b} defects ({approx}5x10{sup 11} cm{sup -2}) with the unpaired sp{sup 3} Si dangling bond along the [111] interface normal, the archetypical defect (trap) of the standard thermal (111)Si/SiO{sub 2} interface, directly revealing, and identified as the result of, imperfect epitaxy. The occurrence of P{sub b} defects, a major system of electrically detrimental interface traps, is ascribed to lattice mismatch with related introduction of misfit dislocations. This interface nature appears to persist for annealing in vacuum up to a temperature T{sub an{approx}}420 deg. C. Yet, in the range T{sub an{approx}}420-550 deg. C, the interface starts to ''degrade'' to standard Si/SiO{sub 2} properties, as indicated by the gradually increasing P{sub b} density and attendant appearance of the EX center, an SiO{sub 2}-associated defect. At T{sub an{approx}}700 deg. C, [P{sub b}] has increased to about 1.3 times the value for standard thermal (111)Si/SiO{sub 2}, to remain constant up to T{sub an{approx}}1000 deg. C, indicative of an unaltered interface structure. Annealing at T{sub an}>1000 deg. C results in disintegration altogether of the Si/SiO{sub 2}-type interface. Passivation anneal in H{sub 2} (405 deg. C) alarmingly fails to deactivate the P{sub b} system to the device grade (sub) 10{sup 10} cm{sup -2} eV{sup -1} level, which would disfavor c-Lu{sub 2}O{sub 3} as a suitable future high-{kappa} replacement for the a-SiO{sub 2} gate dielectric. Comparison of the thermal stability of the c-Lu{sub 2}O{sub 3}/(111)Si interface with that of molecular-beam deposited amorphous-Lu{sub 2}O{sub 3}/(100)Si shows the former to be superior, yet unlikely to meet technological thermal budget requirements. No Lu{sub 2}O{sub 3}-specific point defects could be observed.

36 MATERIALS SCIENCE↗

Plasticity-mediated deformation instabilities in thin film-compliant substrate systems: direct three-dimensional simulations

Abstract Surface wrinkles driven by mechanical instability commonly form in thin-film structures attached to a compliant substrate. In this study, a recently developed computational approach is employed to simulate the formation and transformation of wrinkles involving plastic yielding of the thin film. The three-dimensional (3D) finite element models contain an embedded imperfection at the film-substrate interface, serving to trigger the bifurcation modes. Successful application of this technique to allow for film plasticity is demonstrated, including the evolution of 3D surface patterns and their correlation with the overall load–displacement response. The simulations reveal that plastic yielding transforms the surface instability patterns into more localized forms. Under uniaxial loading, the sinusoidal elastic wrinkles undergo the wrinkle-to-fold transition. With equi-biaxial loading, the initial square-checkerboard array turns into continuous tall ridges along the 45° directions. In both loading modes, the plasticity-induced instability patterns are only partially relieved upon unloading, leaving permanent features on the surface.

36 MATERIALS SCIENCE↗

Cellular interface morphologies in directional solidification. II - The effect of grain boundaries

A singular perturbation analysis valid for small grain-boundary slopes is used with the one-sided model for solidification to show that grain boundaries introduce imperfections into the symmetry of the developing cellular interfaces which rupture the junction between the family of planar shapes and the bifurcating cellular families. Undulating interfaces are shown to develop first near grain boundaries, and to evolve with decreasing temperature gradient either by a smooth transition from the almost planar family or by a sudden jump to moderate-amplitude cellular forms, depending on the growth rate.

Ungar, Lyle H.↗

Interfacial electron and phonon scattering processes in high-powered nanoscale applications.

The overarching goal of this Truman LDRD project was to explore mechanisms of thermal transport at interfaces of nanomaterials, specifically linking the thermal conductivity and thermal boundary conductance to the structures and geometries of interfaces and boundaries. Deposition, fabrication, and post possessing procedures of nanocomposites and devices can give rise to interatomic mixing around interfaces of materials leading to stresses and imperfections that could affect heat transfer. An understanding of the physics of energy carrier scattering processes and their response to interfacial disorder will elucidate the potentials of applying these novel materials to next-generation high powered nanodevices and energy conversion applications. An additional goal of this project was to use the knowledge gained from linking interfacial structure to thermal transport in order to develop avenues to control, or 'tune' the thermal transport in nanosystems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Characterize traction–separation relation and interfacial imperfections by data-driven machine learning models

Abstract Interfacial mechanical properties are important in composite materials and their applications, including vehicle structures, soft robotics, and aerospace. Determination of traction–separation (T–S) relations at interfaces in composites can lead to evaluations of structural reliability, mechanical robustness, and failures criteria. Accurate measurements on T–S relations remain challenging, since the interface interaction generally happens at microscale. With the emergence of machine learning (ML), data-driven model becomes an efficient method to predict the interfacial behaviors of composite materials and establish their mechanical models. Here, we combine ML, finite element analysis (FEA), and empirical experiments to develop data-driven models that characterize interfacial mechanical properties precisely. Specifically, eXtreme Gradient Boosting (XGBoost) multi-output regressions and classifier models are harnessed to investigate T–S relations and identify the imperfection locations at interface, respectively. The ML models are trained by macroscale force–displacement curves, which can be obtained from FEA and standard mechanical tests. The results show accurate predictions of T–S relations ( R 2 = 0.988) and identification of imperfection locations with 81% accuracy. Our models are experimentally validated by 3D printed double cantilever beam specimens from different materials. Furthermore, we provide a code package containing trained ML models, allowing other researchers to establish T–S relations for different material interfaces.

97 MATHEMATICS AND COMPUTING↗

Improved performance of a near-field thermophotovoltaic device by a back gapped reflector

Various spectral control techniques can be applied to improve the performance of a thermophotovoltaic (TPV) device. For example, a back surface reflector (BSR) is a common structure to improve the performance of TPV devices. A conventional metal BSR structure enhances the photogeneration rate by increasing the absorption probability of photons via back surface reflections, affording a second chance for absorption. However, the effects of surface passivation and external luminescence introduced by BSR structures have been previously ignored, which potentially decreases the performance of TPV devices. Recently, a back gapped reflector (BGR) structure was proposed to greatly improve the performance of far-field TPV devices by reducing imperfect reflections at the semiconductor-metal interface. In the present work, the performance improvement on a thin-film, near-field InAs TPV device with a BGR is investigated, comparing its performance to that with a conventional metal BSR. Surface passivation conditions are also investigated to further improve the performance of TPV devices with back reflectors. Further, the output power and efficiency are calculated using an iterative model combining fluctuational electrodynamics and the full drift diffusion model. For the well-passivated condition, when the BSR is replaced by the BGR, the calculated conversion efficiency of the near-field TPV was improved from 16.4% to 21% and the output power was increased by 10%. Finally, the absorption of the back reflectors and external luminescence loss are analyzed to explain the performance improvement.

external luminescence↗

Atomic-scale analyses of Nb 3 Sn on Nb prepared by vapor diffusion for superconducting radiofrequency cavity applications: a correlative study

We report on atomic-scale analyses of the microstructure of an Nb 3 Sn coating on Nb, prepared by a vapor diffusion process for superconducting radiofrequency (SRF) cavity applications using transmission electron microscopy, electron backscatter diffraction and first-principles calculations. Epitaxial growth of Nb 3 Sn on a Nb substrate is found and four types of orientation relationships (ORs) at the Nb 3 Sn/Nb interface are identified by electron diffraction or high-resolution scanning transmission electron microscopy (HR-STEM) analyses. Thin Nb 3 Sn grains are observed in regions with a low Sn flux and they have a specific OR: Nb 3 Sn (1$\bar{2}$0) //Nb ($\bar{1}$11) and Nb 3 Sn (002) //Nb (0$\bar{1}$1) The Nb 3 Sn/Nb interface of thin grains has a large lattice mismatch, 12.3%, between Nb(0$\bar{1}$1) and Nb 3 Sn (002) and a high density of misfit dislocations as observed by HR-STEM. Based on our microstructural analyses of the thin grains, we conclude that the thin regions are probably a result of a slow interfacial migration with this particular OR. The Sn-deficient regions are seen to form initially at the Nb 3 Sn/Nb interface and remain in the grains due to the slow diffusion of Sn in bulk Nb 3 Sn. The formation of Sn-deficient regions and the effects of interfacial energies on the formation of Sn-deficient regions at different interfaces are estimated by first-principles calculations. The finding of ORs at the Nb 3 Sn/Nb interface provides important information about the formation of imperfections in Nb 3 Sn coatings, such as large thin-regions and Sn-deficient regions, which are critical to the performance of Nb 3 Sn SRF cavities for accelerators.

43 PARTICLE ACCELERATORS↗

Mitigating coherent loss in superconducting circuits using molecular self-assembled monolayers

In planar superconducting circuits, decoherence due to materials imperfections, especially two-level-system (TLS) defects at different interfaces, is a primary hurdle for advancing quantum computing and sensing applications. Traditional methods for mitigating TLS loss, such as etching oxide layers at metal and substrate interfaces, have proven to be inadequate due to the persistent challenge of oxide regrowth. In this work, we introduce a novel approach that employs molecular self-assembled monolayers (SAMs) to chemically bind at different interfaces of superconducting circuits. This technique is specifically tested here on coplanar waveguide (CPW) resonators, in which this method not only impedes oxide regrowth after surface etching but can also tailors the dielectric properties at different resonators interfaces. The deployment of SAMs results in a consistent improvement in the measured quality factors across multiple resonators, surpassing those with only oxide-etched resonators. The efficiency of our approach is supported by microwave measurements of multiple devices conducted at millikelvin temperatures and correlated with detailed X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) characterizations of SAM-passivated resonators. The compatibility of SAMs materials with the established fabrication techniques offers a promising route to improve the performance of superconducting quantum devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Streaking images that appear only in the plane of diffraction in undoped GaAs single crystals: Diffraction imaging (topography) by monochromatic synchrotron radiation

Streaking images restricted to the direction of the diffraction (scattering) vector have been observed on transmission through undoped GaAs. These disruption images (caused by the reduction of diffraction in the direction of observation) appear both in the forward and in Bragg diffracted directions in monochromatic synchrontron radiation diffraction imaging. This previously unobserved phenomenon can be explained in terms of planar defects (interfaces) or platelets which affects the absorption coefficient in anomalous transmission. Such regions of the crystal look perfect despite the presence of imperfections when the scattering vector is not perpendicular to the normal of the platelets. The observed crystallographic orientation of these interfaces strongly indicates that they are antiphase boundaries.

Kuriyama, Masao↗

The effect of surface and interface on Neel transition temperature of low-dimensional antiferromagnetic materials

Incorporating the bond order-length-strength (BOLS) notion with the Ising premise, we have modeled the size dependence of the Neel transition temperature (T{sub N}) of antiferromagnetic nanomaterials. Reproduction of the size trends reveals that surface atomic undercoordination induces bond contraction, and interfacial hetero-coordination induces bond nature alteration. Both surface and interface of nanomaterials modulate the T{sub N} by adjusting the atomic cohesive energy. The T{sub N} is related to the atomic cohesive/exchange energy that is lowered by the coordination number (CN) imperfection of the undercoordinated atoms near the surface and altered by the changed bond nature of epitaxial interface. A numerical match between predictions and measurements reveals that the T{sub N} of antiferromagnetic nanomaterials declines with reduced size and increases with both the strengthening of heterogeneous bond and the increase of the bond number.

36 MATERIALS SCIENCE↗

Oxygen-induced defects at the lead halide perovskite/graphene oxide interfaces

Here, graphene oxide or its reduced derivative (GO/RGO) replace metal oxides in perovskite photovoltaics to achieve energy band alignment for minimization of the energy barriers at the film interfaces allowing efficient charge transport, and eliminate stability issues. However, the power conversion efficiencies fall in a wide range (~0.6–18%). Therefore, the perovskite growth and nucleation on GO/RGO require fundamental understanding to improve device function for controlled fabrication, which remain a major challenge. We analyze the surface morphology and crystallization of the lead halide perovskites (MAPbX 3 ) at 20–300 °C on GO using X-ray diffraction and photoelectron spectroscopy. To determine defect mechanisms and their composition, we perform in situ transmission infrared and micro Raman spectroscopy, and the cross-sectional scanning microscopy that captures interfacial imperfections with the oxygen defects. We demonstrate the oxygen-induced defects at the MAPbX 3 /GO interfaces that initiate at room temperature, and occur through the nucleophilic substitution reactions. Unexpectedly, structural defects nucleate in GO forming chemically reduced GO, and modify the surface morphology that yield a poor perovskite growth. Our theoretical studies also reveal that energetically favorable, exothermic reactions between the halides of the perovskite precursors and the oxygen groups of GO generate acidic reaction by-products ( i.e. HX), that confirm the formation of oxygen-induced defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic Properties and Electronic Structure of Ni/C Multilayer Films

The magnetic properties of Ni/C multilayers were investigated using vibrating sample magnetometer and ferromagnetic resonance (FMR). Spin wave resonances were seen in FMR and the spin wave was found to be sustained through whole layers. The interlayer coupling constant was small pointing out a weak exchange coupling between Ni films through C spacers. The FMR linewidth, in parallel geometry, of the uniform mode decreases with the increase in Ni thickness from 30 to 300 Å which can be understood by considering interfacial effects. The magnetization decreases with decreasing Ni thickness due to the structural imperfections associated with the presence of Ni{sub 1−x}C{sub x} alloys at the interface. Density functional theory (DFT) has been performed to shed light on the decrease in magnetic moment at the interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Density variance dynamics in disparate shock tubes

This report discusses two experiments which investigate thin layer, heavy curtain fragmentation from the perspective of a Reynolds-Averaged mix model, in drastically disparate experimental regimes. The first, the centimeter/millisecond-scale “Horizontal Shock Tube” (HST) is a compressed-gas piston-driven shock tube experiment. The second, the “Multishock thin layer” (Mshock) experiment performed at the National Ignition Facility, is a micrometer/nanosecond-scale laser-driven shock tube experiment. Both are situations in which a heavy plane layer (a ‘curtain’) is initially suspended in a lighter medium. After being shocked from at least one side, the layer translates while its interfaces evolve due to the excitation of the Richtmyer-Meshkov instability at its surfaces. The evolution of density variance, which initially exists only on the surface of the layer, as it comes to encompass the whole layer interior is used as a description of layer fragmentation and dissolution. These experiments have each been simulated in the Los Alamos National Laboratory multi-physics code xRAGE, which includes fundamental hydrodynamics, extended plasma physics and radiation effects which are important to drive the high-energy density experiment, and the Besnard-Harlow-Rauenzahn (BHR) turbulence model. In each, the principal diagnostic for comparison is an experimental metric for the density (co)variance, b, which tracks the moments of the density field at the curtain interfaces and body. Due to experimental constraints in different regimes (i.e. optical diagnostics can be deployed on conventional shock tubes, while the plasma shock tubes must be imaged by x-rays; interfaces can be imposed to specification on laser-driven experiments, which are stored in the solid phase, while conventional experiments have imperfect control of the flow fields which separate the layer, etc.) the experiments are not designed to be perfect scaled cognates of one another. However, despite the separation of six orders of magnitude of scaling in time, and four in space, we are able to demonstrate that the same turbulence model, operating in the same fashion in the same computer code, is able to reproduce results in each experiment, by tracking evolution due to common relevant physics. Additionally, we will present preliminary work toward density variance comparisons in a single-interface Richtmyer-Meshkov configuration, the conventional fluid “Vertical Shock Tube” (VST) experiment, and the Modal Initial Conditions (ModCons) campaign fielded at the OMEGA-EP laser facility.

42 ENGINEERING↗

Ameliorating the sodium storage performance of hard carbon anode through rational modulation of binder

Hard carbon anodes have emerged as promising candidates for sodium-ion batteries due to their inherent advantages. Nevertheless, the surface imperfections in these materials often culminate in irreversible electrolyte consumption, fostering the development of a heterogeneous and fragile solid electrolyte interface (SEI), thereby compromising the initial Coulombic efficiency (ICE). Here, drawing inspiration from the catalytic potential of C=O (carbonyl) bonds in directing preferential salt reduction, we introduce a novel strategy that leverages the modulation of the binder, a long-term overlooked pivotal components in the electrode process. Specifically, Polymethyl methacrylate (PMMA), abundant in C=O groups, is partially substituted for PVDF, ensuring robust adhesion of the electrode material to the current collector while preserving superior mechanical properties. The accurate combination of two binders with delightful compatibility in the state-of-art electrode process, can promote a uniform formation of the SEI on the hard carbon surface enriched in inorganic components, which can ensure long-term interfacial stability and suppresses excessive solvent decomposition and facilitates Na + transfer at the interface. Consequently, the initial Coulombic efficiency of the hard carbon anode with 70 %PMMA binder achieves 86 %, with prominent cycling stability (88 % capacity retention over 500 cycles) at a high current density of 1.2 A g −1 . When paired with high loading cathodes to assemble the pouch cell, it also demonstrates stable operational scenarios.

25 ENERGY STORAGE↗

Entanglement swapping systems toward a quantum internet

We demonstrate conditional entanglement swapping, i.e. teleportation of entanglement, between time-bin qubits at the telecommunication wavelength of 1536.4 nm with high fidelity of 87%. Our system is deployable, utilizing modular, off-the-shelf, fiber-coupled, and electrically controlled components such as electro-optic modulators. It leverages the precise timing resolution of superconducting nanowire detectors, which are controlled and read out via a custom developed graphical user interface. The swapping process is described, interpreted, and guided using characteristic function-based analytical modeling that accounts for realistic imperfections. Our system supports quantum networking protocols, including source-independent quantum key distribution, with an estimated secret key rate of approximately 0.5 bits per sifted bit.

Davis, Samantha I. [Caltech] (ORCID:00000001999481↗