SEARCH · Search NASA

Results for “Inversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Aircraft automatic digital flight control system with inversion of the model in the feed-forward path

A full-flight-envelope automatic trajectory control system concept is being investigated at Ames Research Center. This concept was developed for advanced aircraft configurations with severe nonlinear characteristics. A feature of the system is an inverse of the complete nonlinear aircraft model as part of the feed-forward control path. Simulation and flight tests have been reported at previous Digital Avionics Systems conferences. A new method for the continuous real-time inversion of the aircraft model using a Newton-Raphson trim algorithm instead of the original inverse table look-up procedure has been developed. The results of a simulation study of a vertical attitude takeoff and landing aircraft using the new inversion technique are presented. Maneuvers were successfully carried out in all directions in the vertical-attitude hover mode. Transition runs from conventional flight through the region of lift-curve-slope reversal at an angle of attack of about 32 deg and to hover at zero speed in the vertical attitude showed satisfactory transient response. Simulations were also conducted in conventional flight at high subsonic speed in steep climb and with turns up to 4 g. Successful flight tests of the system with the new model-inversion technique in a UH-1H helicopter have recently been carried out.

Smith, G. A.↗

NASA NTRS1987

Inverse kinematic-based robot control

A fundamental problem which must be resolved in virtually all non-trivial robotic operations is the well-known inverse kinematic question. More specifically, most of the tasks which robots are called upon to perform are specified in Cartesian (x,y,z) space, such as simple tracking along one or more straight line paths or following a specified surfacer with compliant force sensors and/or visual feedback. In all cases, control is actually implemented through coordinated motion of the various links which comprise the manipulator; i.e., in link space. As a consequence, the control computer of every sophisticated anthropomorphic robot must contain provisions for solving the inverse kinematic problem which, in the case of simple, non-redundant position control, involves the determination of the first three link angles, theta sub 1, theta sub 2, and theta sub 3, which produce a desired wrist origin position P sub xw, P sub yw, and P sub zw at the end of link 3 relative to some fixed base frame. Researchers outline a new inverse kinematic solution and demonstrate its potential via some recent computer simulations. They also compare it to current inverse kinematic methods and outline some of the remaining problems which will be addressed in order to render it fully operational. Also discussed are a number of practical consequences of this technique beyond its obvious use in solving the inverse kinematic question.

Wolovich, W. A.↗

NASA NTRS1989

Minimal inversion, command matching and disturbance decoupling in multivariable systems

The present treatment of the related problems of minimal inversion and perfect output control in linear multivariable systems uses a simple analytical expression for the inverse of a square multivariate system's transfer-function matrix to construct a minimal-order inverse of the system. Because the poles of the minimal-order inverse are the transmission zeros of the system, necessary and sufficient conditions for the inverse system's stability are simply stated in terms of the zero polynomial of the original system. A necessary and sufficient condition for the existence of the required controllers is that the plant zero polynomial be neither identical to zero nor unstable.

Seraji, H.↗

NASA NTRS1991

Application of direct inverse analogy method (DIVA) and viscous design optimization techniques

A direct-inverse approach to the transonic design problem was presented in its initial state at the First International Conference on Inverse Design Concepts and Optimization in Engineering Sciences (ICIDES-1). Further applications of the direct inverse analogy (DIVA) method to the design of airfoils and incremental wing improvements and experimental verification are reported. First results of a new viscous design code also from the residual correction type with semi-inverse boundary layer coupling are compared with DIVA which may enhance the accuracy of trailing edge design for highly loaded airfoils. Finally, the capabilities of an optimization routine coupled with the two viscous full potential solvers are investigated in comparison to the inverse method.

Greff, E.↗

NASA NTRS1993

Non-recursive augmented Lagrangian algorithms for the forward and inverse dynamics of constrained flexible multibodies

A technique is presented for solving the inverse dynamics of flexible planar multibody systems. This technique yields the non-causal joint efforts (inverse dynamics) as well as the internal states (inverse kinematics) that produce a prescribed nominal trajectory of the end effector. A non-recursive global Lagrangian approach is used in formulating the equations for motion as well as in solving the inverse dynamics equations. Contrary to the recursive method previously presented, the proposed method solves the inverse problem in a systematic and direct manner for both open-chain as well as closed-chain configurations. Numerical simulation shows that the proposed procedure provides an excellent tracking of the desired end effector trajectory.

Bayo, Eduardo↗

NASA NTRS1993

A general rough-surface inversion algorithm: Theory and application to SAR data

Rough-surface inversion has significant applications in interpretation of SAR data obtained over bare soil surfaces and agricultural lands. Due to the sparsity of data and the large pixel size in SAR applications, it is not feasible to carry out inversions based on numerical scattering models. The alternative is to use parameter estimation techniques based on approximate analytical or empirical models. Hence, there are two issues to be addressed, namely, what model to choose and what estimation algorithm to apply. Here, a small perturbation model (SPM) is used to express the backscattering coefficients of the rough surface in terms of three surface parameters. The algorithm used to estimate these parameters is based on a nonlinear least-squares criterion. The least-squares optimization methods are widely used in estimation theory, but the distinguishing factor for SAR applications is incorporating the stochastic nature of both the unknown parameters and the data into formulation, which will be discussed in detail. The algorithm is tested with synthetic data, and several Newton-type least-squares minimization methods are discussed to compare their convergence characteristics. Finally, the algorithm is applied to multifrequency polarimetric SAR data obtained over some bare soil and agricultural fields. Results will be shown and compared to ground-truth measurements obtained from these areas. The strength of this general approach to inversion of SAR data is that it can be easily modified for use with any scattering model without changing any of the inversion steps. Note also that, for the same reason it is not limited to inversion of rough surfaces, and can be applied to any parameterized scattering process.

Moghaddam, M.↗

NASA NTRS1999

Preview-Based Stable-Inversion for Output Tracking

Stable Inversion techniques can be used to achieve high-accuracy output tracking. However, for nonminimum phase systems, the inverse is non-causal - hence the inverse has to be pre-computed using a pre-specified desired-output trajectory. This requirement for pre-specification of the desired output restricts the use of inversion-based approaches to trajectory planning problems (for nonminimum phase systems). In the present article, it is shown that preview information of the desired output can be used to achieve online inversion-based output tracking of linear systems. The amount of preview-time needed is quantified in terms of the tracking error and the internal dynamics of the system (zeros of the system). The methodology is applied to the online output tracking of a flexible structure and experimental results are presented.

Zou, Qing-Ze↗

NASA NTRS1985

Shoot inversion-induced ethylene in Pharbitis nil induces the release of apical dominance by restricting shoot elongation

Shoot inversion induces outgrowth of the highest lateral bud (HLB) adjacent to the bend in the stem in Pharbitis nil. In order to determine whether or not ethylene produced by shoot inversion plays a direct role in promoting or inhibiting bud outgrowth, comparisons were made of endogenous levels of ethylene in the HLB and HLB node of plants with and without inverted shoots. That no changes were found suggests that the control of apical dominance does not involve the direction action of ethylene. This conclusion is further supported by evidence that the direct application of ethylene inhibitors or ethrel to inactive or induced lateral buds has no significant effect on bud outgrowth. The hypothesis that ethylene evolved during shoot inversion indirectly promotes the outgrowth of the highest lateral bud (HLB) in restricting terminal bud (TB) growth is found to be supported by the following observations: (1) the restriction of TB growth appears to occur before the beginning of HLB outgrowth; (2) the treatment of the inverted portion of the shoot with AgNO3, an inhibitor of ethylene action, dramatically eliminates both the restriction of TB growth and the promotion of HLB outgrowth which usually accompany shoot inversion; and (3) the treatment of the upper shoot of an upright plant with ethrel mimics shoot inversion by retarding upper shoot growth and inducing outgrowth of the lateral bud basipetal to the treated region.

NASA Discipline Plant Biology↗

NASA NTRS2009

Chemical Source Inversion using Assimilated Constituent Observations in an Idealized Two-dimensional System

We present a source inversion technique for chemical constituents that uses assimilated constituent observations rather than directly using the observations. The method is tested with a simple model problem, which is a two-dimensional Fourier-Galerkin transport model combined with a Kalman filter for data assimilation. Inversion is carried out using a Green's function method and observations are simulated from a true state with added Gaussian noise. The forecast state uses the same spectral spectral model, but differs by an unbiased Gaussian model error, and emissions models with constant errors. The numerical experiments employ both simulated in situ and satellite observation networks. Source inversion was carried out by either direct use of synthetically generated observations with added noise, or by first assimilating the observations and using the analyses to extract observations. We have conducted 20 identical twin experiments for each set of source and observation configurations, and find that in the limiting cases of a very few localized observations, or an extremely large observation network there is little advantage to carrying out assimilation first. However, in intermediate observation densities, there decreases in source inversion error standard deviation using the Kalman filter algorithm followed by Green's function inversion by 50% to 95%.

Tangborn, Andrew↗

NASA NTRS2019

Implementation and Testing of Inverse Kinematics on Robotic Arm

COSIE (Coronal Spectrographic Imager in the Extreme Ultraviolet) is a proposed solar tracking ISS imaging payload that will help bridge the theoretical gap between the physics of the low corona and the heliosphere. This scientific instrument requires high pointing accuracy, on the order of arc seconds. The instrument is mounted on to a three revolute joint robotic arm in order to track the roll, pitch and yaw motion of the Sun. The goal of this project is to construct a prototype model of the robotic arm and implement the proposed analytical inverse kinematics algorithm. In robotics, the inverse kinematics problem is solving for the set of joint angles that achieve the desired end effect or location and/or orientation. In this case, orientation is the focus. Depending on the configuration, multiple sets of joint angle solutions may exist. Due to the complexity of robotics, typically iterative methods are used to solve for the joint angle solution sets. However, in this case, an analytical solution exists. A small robotic arm representative of the full size hardware was constructed. The inverse kinematics algorithm, originally in MATLAB/Simulink, was converted into C in order to interface with the motors. This C software was implemented on a Windows PC and micro-controller, and serial communication between the two was established, allowing the motors to be directly controlled by the inverse kinematics algorithm. Testing the inverse kinematics on a physical system will allow the validity and accuracy of the analytic solution to be verified.

Franz, Carter↗

NASA NTRS2019

Is There an Optimal CO2 Partial Column for Flux Inversions?

The fidelity of flux estimates from an atmospheric inversion depends on the ability of atmospheric transport models to simulate the measured quantity. For species such as CO2, with surface fluxes and a large network of surface measurements, this means correctly simulating the dynamics of the planetary boundary layer (PBL), which is one of the most uncertain aspects of atmospheric transport modeling. In contrast, the simulated total column average mole fraction of CO2 (XCO2) is largely insensitive to simulated PBL dynamics. Therefore, measurements of XCO2 provided by current and future short wave infrared (SWIR) greenhouse gas (GHG) satellites such as GOSAT and the OCO family would seem to be more appropriate to flux inversions, as far as minimizing transport model errors (the "noise") is concerned. Unfortunately, the flux-induced variation of CO2 (the "signal") is the largest within the PBL and smallest in XCO2. Therefore, assimilating XCO2 as opposed to PBL CO2 need not give us the strongest "signal to noise" in flux inversions. Recent work on GOSAT and OCO2 retrievals suggest that SWIR satellite spectra may be used to estimate a lower partial column CO2, which could be assimilated in a flux inversion, instead of XCO2.Here we report on a study to assess whether there is an optimal partial column average CO2, intermediate between PBL CO2 and XCO2, whose assimilation might yield the best signal to noise in flux inversions, where (as before) "signal" is the flux-induced variation and "noise" is the error in transport modeling. We simulate atmospheric CO2 with five different global transport models and a common surface CO2 flux over ten years. We consider the spread across the five models to be a proxy for transport model error (the "noise"), and the common variation of CO2 in all five models to be a proxy for the "signal". We compare these signals and noises at different spatiotemporal scales for different partial column specifications to investigate whether there exists an optimal partial column that has large surface flux-driven variations and yet is relatively insensitive to errors in transport models. Finally, we comment on the feasibility of estimating such a partial column from current and future SWIR GHG satellites in the light of recent work on vertically resolved CO2 from current SWIR GHG satellites.

Basu, Sourish↗

NASA NTRS2021

Inversion of Magnetic Measurements of the Swarm A Satellite of the Bangui Magnetic Anomaly

We wanted to make a satellite altitude magnetic anomaly map of the large magnetic anomaly in the Central African Republic, the Bangui magnetic anomaly, with data from the Swarm satellites. In the first part of our study, we summarize the earlier investigations and their interpretation. In the second we discuss our data processing applied to produce a magnetic anomaly map. We used the IGRF 12th to remove the long-wavelength regional anomalies. We will use an inverse procedure, which always requires a solution of the direct problem, and a horizontal polygonal prism given in the Descartes coordinate system. For this, reason the total magnetic anomaly was transformed into the Descartes coordinate system. The magnetization and its direction were used from our previous paper. The inverse problem is solved by the Simplex procedure. Our selected polygon has 14 geometrical parameters however, the inverse problem that is the numerical determination of the minimum problem is solved in the 14 dimensions. The result of our inverse problem was the 12 horizontal coordinates and the two upper and lower data of the polygon. The origin of the Bangui anomaly has been discussed in several scientific reports, either as a deep crustal tectonic feature or the result of a large external impactor. However, according to our inversion computations we cannot make any unambiguous finding for the origin of this feature. The inaccuracy in our total anomaly map is given by the Gaussian error propagation.

KI Kis↗

NASA NTRSDate not supplied

NASA’s Prototype Spectral Water Inversion Processor and Emulator (SWIPE): Towards Global Coastal and Inland Water Quality and Algal Biodiversity Monitoring

Degradation of Earth’s inland water resources due to anthropogenic perturbations and climate anomalies at both local and global scales continues to place human health at substantial risk. There is now a growing necessity to develop pragmatic approaches that allow timely and effective extrapolation of local processes, to spatially resolved global products, and to promote operational and sustainable resource policy management. This presentation will provide updates on NASA’s prototype open-source aquatic modeling platform, Spectral Water Inversion Processor and Emulator (SWIPE), which is a comprehensive, multi-faceted modeling platform for both forward and inverse modeling of diverse aquatic ecosystems from the benthos to top-of-atmosphere (TOA). SWIPE provides a cohesive application which leverages recent advancements in particle modeling, Big Data analytics, and machine learning to develop a high-fidelity synthetic training ground for sensitivity studies and algorithm development for multispectral or upcoming hyperspectral missions. Some of the prominent features of SWIPE to be discussed include: 1. Advanced hyperspectral modeling of globally diverse algal and non-algal particles using a novel two-layer coated sphere scattering model and radiative transfer modeling, 2. Massive, highly detailed synthetic spectral libraries of Analysis-Ready-Data (ARD) which include spectral libraries of particle microphysics, water biogeophysical and optical properties, as well as surface and TOA reflectances at 1 nm resolution, 3. An ensemble of pre-built analytic, machine learning, and deep learning inversion algorithms for various water quality and biodiversity related retrieval parameters and uncertainty quantification, 4. Sensor-agnostic water quality inversion at wide ranging spatial and spectral resolutions including a codebase for seamless application in the Google Earth Engine and NASA Earth Exchange (NEX) for planetary scale analysis. SWIPE will be a fully open-source platform based in python with comprehensive documentation, tutorials, and options for distributed computing on high performance computing clusters or on single, local machines. Further, we will discuss how we envision SWIPE contributing towards a global analysis of coastal and inland water quality dynamics.

top-of-atmosphere (TOA)↗

NASA NTRSDate not supplied

Modified Cascading Generalized Inverse Control Allocation

The current aviation revolution towards electric propulsion aircraft (e.g., electric vertical takeoff-and-landing) brings unique control challenges. These vehicles are typically over-actuated (more effectors than desired control outcomes), may require control strategies for the three phases of flight (hover, transition and cruise), and currently have limited electric power availability. These vehicle challenges bring the need for optimal control allocation to the forefront of research. A leading control allocation algorithm, used in current flight vehicles, is the Cascading Generalized Inverse (CGI). Unfortunately, the Cascading Generalized Inverse algorithm is unable to achieve some desired outcomes, it intermittently provides non-optimal allocations, and it may fail to preserve moment direction near maximal achievable outcomes. In this research, the shortcomings of the Cascading Generalized Inverse algorithm are addressed by augmenting the algorithm with Scalar Difference Quadratic unsaturation identification and location at each iteration. Rigorous theory is shown that the Modified Cascading Generalized Inverse performs better at obtaining optimal allocations for all attainable outcomes. Numerical case studies for over-actuated vehicles demonstrate resolution to the aforementioned deficiencies.

Control Allocation↗

NASA NTRSDate not supplied

Modified Cascading Generalized Inverse Control Allocation

Control Allocation↗

NASA NTRS2017

Imaging a Free-Geometry Magma Reservoir Using FEM-Based Linear Inverse Modeling of InSAR Data: Application to Rabaul Caldera, Papua New Guinea

We test an innovative inversion scheme using Green’s functions from an array of pressure sources embedded in finite-element method (FEM) models to image, without assuming an a-priori geometry, the composite and complex shape of a volcano deformation source. We invert interferometric synthetic aperture radar (InSAR) data to estimate the pressurization and shape of the magma reservoir of Rabaul caldera, Papua New Guinea. The results image the extended shallow magmatic system responsible for a broad and long-term subsidence of the caldera between 2007 February and 2010 December. Elastic FEM solutions are integrated into the regularized linear inversion of InSAR data of volcano surface displacements in order to obtain a 3-D image of the source of deformation. The Green’s function matrix is constructed from a library of forward line-of-sight displacement solutions for a grid of cubic elementary deformation sources. Each source is sequentially generated by removing the corresponding cubic elements from a common meshed domain and simulating the injection of a fluid mass flux into the cavity, which results in a pressurization and volumetric change of the fluidfilled cavity. The use of a single mesh for the generation of all FEM models avoids the computationally expensive process of non-linear inversion and remeshing a variable geometry domain. Without assuming an a-priori source geometry other than the configuration of the 3-D grid that generates the library of Green’s functions, the geodetic data dictate the geometry of the magma reservoir as a 3-D distribution of pressure (or flux of magma) within the source array. The inversion of InSAR data of Rabaul caldera shows a distribution of interconnected sources forming an amorphous, shallow magmatic system elongated under two opposite sides of the caldera. The marginal areas at the sides of the imaged magmatic system are the possible feeding reservoirs of the ongoing Tavurvur volcano eruption of andesitic products on the east side and of the past Vulcan volcano eruptions of more evolved materials on the west side. The interconnection and spatial distributions of sources correspond to the petrography of the volcanic products described in the literature and to the dynamics of the single and twin eruptions that characterize the caldera. The ability to image the complex geometry of deformation sources in both space and time can improve our ability to monitor active volcanoes, widen our understanding of the dynamics of active volcanic systems and improve the predictions of eruptions.

Inverse theory↗

NASA NTRS2017

Imaging the Complex Geometry of a Magma Reservoir Using Fem-Based Linear Inverse Modeling of InSAR Data: Application to Rabaul Caldera, Papua New Guinea

We test an innovative inversion scheme using Green’s functions from an array of pressure sources embedded in finite-element method (FEM) models to image, without assuming an a-priori geometry, the composite and complex shape of a volcano deformation source. We invert interferometric synthetic aperture radar (InSAR) data to estimate the pressurization and shape of the magma reservoir of Rabaul caldera, Papua New Guinea. The results image the extended shallow magmatic system responsible for a broad and long-term subsidence of the caldera between 2007 February and 2010 December. Elastic FEM solutions are integrated into the regularized linear inversion of InSAR data of volcano surface displacements in order to obtain a 3-D image of the source of deformation. The Green’s function matrix is constructed from a library of forward line-of-sight displacement solutions for a grid of cubic elementary deformation sources. Each source is sequentially generated by removing the corresponding cubic elements from a common meshed domain and simulating the injection of a fluid mass flux into the cavity, which results in a pressurization and volumetric change of the fluid-filled cavity. The use of a single mesh for the generation of all FEM models avoids the computationally expensive process of non-linear inversion and remeshing a variable geometry domain. Without assuming an a-priori source geometry other than the configuration of the 3-D grid that generates the library of Green’s functions, the geodetic data dictate the geometry of the magma reservoir as a 3-D distribution of pressure (or flux of magma) within the source array. The inversion of InSAR data of Rabaul caldera shows a distribution of interconnected sources forming an amorphous, shallow magmatic system elongated under two opposite sides of the caldera. The marginal areas at the sides of the imaged magmatic system are the possible feeding reservoirs of the ongoing Tavurvur volcano eruption of andesitic products on the east side and of the past Vulcan volcano eruptions of more evolved materials on the west side. The interconnection and spatial distributions of sources correspond to the petrography of the volcanic products described in the literature and to the dynamics of the single and twin eruptions that characterize the caldera. The ability to image the complex geometry of deformation sources in both space and time can improve our ability to monitor active volcanoes, widen our understanding of the dynamics of active volcanic systems and improve the predictions of eruptions.

Inverse theory↗

NASA NTRSDate not supplied

Forward and Inverse Models for Satellite Remote Sensors using Principal Component Analysis

Satellite remote sensors such as AIRS on Aqua, CrIS on S-NPP, NOAA20 and JPSS-2, IASI on Metop A, B, and C make millions of observations each day with thousands of spectral channels for each observation; this poses challenges for efficiently inversion of the inherently large dataset as needed to retrieve atmospheric and surface properties. This presentation will illustrate the use of Principal Component Analysis (PCA) to speed up radiative transfer forward model calculations and to stabilize the inversion algorithms. A Principal Component-based radiative transfer model (PCRTM) developed at NASA Langley Research Center can simulate top of atmosphere (TOA) radiance or reflectance spectra from 50 cm-1 to 50000 cm-1 (200 m to 0.20 m quickly and accurately. PCRTM demonstrated very high accuracy relative to reference line-by-line radiative transfer models and it saves orders of magnitude computational time. Examples of the PCRTM model developed for hyperspectral sensors such as AIRS, CrIS, IASI, NAST-I, SHIS, CPF, TEMPO, SBG, OMI, and SCIAMACHY will be presented. In addition to using the PCRTM as forward model, the NASA Langley developed inversion algorithm also uses PCA to compress the state vector into a compressed dimension to speed up and stabilize the inversion process. Examples of retrieved atmospheric temperature, water vapor, CO2, CO, CH4, N2O, and O3 profiles, cloud properties (optical depth, size, phase, and height), and surface properties (surface emissivity spectra and skin temperatures) will be presented. This algorithm is being transitioned to the NASA Sounder SIPS and NASA's Goddard Earth Sciences Data and Information Services Center (GES DISC).

forward model↗