Search NASA⌕ Search

SEARCH · Search NASA

Results for “Involute”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Analysis of the vibratory excitation arising from spiral bevel gears

Tools required to understand and predict in terms of its underlying causes the vibratory excitation arising from meshing spiral bevel gears are developed. A generalized three component transmission error of meshing spiral bevel gears is defined. Equations are derived that yield the three components of the generalized transmission error in terms of deviations of tooth running surfaces from equispaced perfect spherical involute surfaces and tooth/gearbody elastic deformations arising from the three components of the generalized force transmitted by the meshing gears. A method for incorporating these equations into the equations of motion of a gear system is described. Equations are derived for the three components of the generalized force transmitted by the gears which are valid whenever inertial effects of the meshing gears and their supports are negligible. Bearing offsets from the positions occupied by the shaft centerlines of perfect spherical involute bevel gears and bearing/bearing support flexibilities enter into the computation of these forces.

Mark, William D.↗

The generalized transmission error of spiral bevel gears

The traditional definition of the transmission error of parallel-axis gear pairs is reviewed and shown to be unsuitable for characterizing the deviation from conjugate action of bevel gear pairs for vibration excitation characterization purposes. This situation is rectified by generalizing the concept of the transmission error of parallel-axis gears to a three-component transmission error for spiral bevel gears of nominal spherical involute design. A general relationship is derived which expresses the contributions to the three-component transmission error from each gear of a meshing spiral bevel pair as a linear transformation of the six coordinates that describe the deviation of the shaft centerline position of each gear of the pair from the position of its rigid perfect involute counterpart.

Mark, W. D.↗

Surface pitting fatigue life of noninvolute, low-contact-ratio gears

Spur gear endurance tests were conducted to investigate the surface pitting fatigue life of noninvolute gears with low numbers of teeth and low contact ratios for use in advanced applications. The results were compared with those for a standard involute design with a low number of teeth. The gear pitch diameter was 8.89 cm (3.50 in.) with 12 teeth on both gear designs. Test conditions were an oil inlet temperature of 320 K (116 F), an oil outlet temperature of 350 K (170 F), a maximum Hertz stress of 1.49 GPa (216 ksi), and a speed of 10 000 rpm. The following results were obtained: the noninvolute gear had a surface pitting fatigue life approximately 1.6 times that of the standard involute gear of a similar design; and the surface pitting fatigue life of the 3.43-pitch AISI 8620 noninvolute gear was approximately equal to the surface pitting fatigue life of an 8-pitch, 28-tooth AISI 9310 gear at the same load but at a considerably higher maximum Hertz stress.

Townsend, Dennis P.↗

Surface pitting fatigue life of noninvolute, low-contact-ratio gears

Spur gear endurance tests were conducted to investigate the surface pitting fatigue life of noninvolute gears with low numbers of teeth and low contact ratios for use in advanced applications. The results were compared with those for a standard involute design with a low number of teeth. The gear pitch diameter was 8.89 cm (3.50 in.) with 12 teeth on both gear designs. Test conditions were an oil inlet temperature of 320 K (116 F), an oil outlet temperature of 350 K (170 F), a maximum Hertz stress of 1.49 GPa (216 ksi), and a speed of 10,000 rpm. The following results were obtained: the noninvolute gear had a surface pitting fatigue life approximately 1.6 times that of the standard involute gear of a similar design; and the surface pitting fatigue life of the 3.43-pitch AISI 8620 noninvolute gear was approximately equal to the surface pitting fatigue life of an 8-pitch, 28-tooth AISI 9310 gear at the same load but at a considerably higher maximum Hertz stress.

Townsend, Dennis P.↗

Advanced Face Gear Surface Durability Evaluations

The surface durability life of helical face gears and isotropic super-finished (ISF) face gears was investigated. Experimental fatigue tests were performed at the NASA Glenn Research Center. Endurance tests were performed on 10 sets of helical face gears in mesh with tapered involute helical pinions, and 10 sets of ISF-enhanced straight face gears in mesh with tapered involute spur pinions. The results were compared to previous tests on straight face gears. The life of the ISF configuration was slightly less than that of previous tests on straight face gears. The life of the ISF configuration was slightly greater than that of the helical configuration.

fatigue↗

Holding fixture facilitates pipe thread gage measurements

Holding fixture that holds the thread gage and three wires in the proper relationship facilitates the measurement of the pitch diameter of the tapered threads of a pipe thread gage. Modified, this device can be used to hold involute spur gears.

Cupps, B.↗

Effect of tip relief on endurance characteristics of super nitralloy and AISI M-50 spur gears

Tests were conducted with two groups of 8.89-centimeter (3.5-in.) pitch diameter spur gears with standard 20 deg involute profile with tip relief made of CVM Super-Nitralloy (5Ni-2Al) and CVM AISI M-50 at a temperature of 350 K (170 F). Super-Nitralloy gears with tip relief had a life 150 percent that of gears without tip relief. An increased scoring phenomenon was noted with the Super-Nitralloy gears with tip relief. Through-hardened AISI M-50 gears with tip relief failed due to tooth fracture. AISI M-50 gears without tip relief had a life approximately 40 times greater than the AISI M-50 gears with tip relief.

Townsend, D. P.↗

Liquid rocket engine turbopump gears

Design and fabrication of gear drives for rocket engine turbopumps are described in the sequence encountered during the design process as follows: (1) selection of overall arrangement; (2) selection of gear type; (3) preliminary sizing; (4) lubrication system design; (5) detail tooth design; (6) selection of gear materials; and (7) gear fabrication and testing as it affects the design. The description is oriented towards the use of involute spur gears, although reference material for helical gears is also cited.

Source record↗

Senescent changes in the ribosomes of animal cells in vivo and in vitro

The paper examines RNA-ribosomal changes observed in protozoa and fixed postmitotic cells, as well as the characteristics of intermitotic cells. Attention is given to a discussion of the implications of the reported ribosomal changes as to the senescent deterioration of protein synthesis and physiological functions. A survey of the literature suggests that, while the data on ribosomal change in dividing cells both in vivo and in vitro are inconclusive, there is strong histological and biochemical evidence in favor of some degree of quantitative ribosomal loss in fixed postmitotic cells. Since these decreases in ribosomes are demonstrated in differential cells from nematodes, insects and mammals, they may represent a universal manifestation of cytoplasmic senescence in certain types of fixed postmitotic animal cells. The observed variability in ribosomal loss for cells belonging to the same type suggests that this involution phenomenon is rather related to the wear and tear suffered by a particular cell.

Miquel, J.↗

Thermal elastohydrodynamic lubrication of spur gears

An analysis and computer program called TELSGE were developed to predict the variations of dynamic load, surface temperature, and lubricant film thickness along the contacting path during the engagement of a pair of involute spur gears. The analysis of dynamic load includes the effect of gear inertia, the effect of load sharing of adjacent teeth, and the effect of variable tooth stiffness which are obtained by a finite-element method. Results obtained from TELSGE for the dynamic load distributions along the contacting path for various speeds of a pair of test gears show patterns similar to that observed experimentally. Effects of damping ratio, contact ratio, tip relief, and tooth error on the dynamic load were examined. In addition, two dimensionless charts are included for predicting the maximum equilibrium surface temperature, which can be used to estimate directly the lubricant film thickness based on well established EHD analysis.

Wang, K. L.↗

Ideal spiral bevel gears: A new approach to surface geometry

The fundamental geometrical characteristics of spiral bevel gear tooth surfaces are discussed. The parametric representation of an ideal spiral bevel tooth is developed based on the elements of involute geometry, differential geometry, and fundamental gearing kinematics. A foundation is provided for the study of nonideal gears and the effects of deviations from ideal geometry on the contact stresses, lubrication, wear, fatigue life, and gearing kinematics.

Huston, R. L.↗

Ideal spiral bevel gears - A new approach to surface geometry

This paper discusses the fundamental geometrical characteristics of spiral bevel gear tooth surfaces. The parametric representation of an ideal spiral bevel tooth is developed. The development is based on the elements of involute geometry, differential geometry, and fundamental gearing kinematics. A foundation is provided for the study of nonideal gears and the effects of deviations from ideal geometry on the contact stresses, lubrication, wear, fatigue life, and gearing kinematics.

Huston, R. L.↗

Surface geometry of circular cut spiral bevel gears

The tooth surface principal radii of curvature of crown (flat) gears were determined. Specific results are presented for involute, straight, and hyperbolic cutter profiles. It is shown that the geometry of circular cut spiral bevel gears is somewhat simpler than a theoretical logarithmic spiral bevel gear.

Huston, R. L.↗

Kinematic precision of gear trains

Kinematic precision is affected by errors which are the result of either intentional adjustments or accidental defects in manufacturing and assembly of gear trains. A method for the determination of kinematic precision of gear trains is described. The method is based on the exact kinematic relations for the contact point motions of the gear tooth surfaces under the influence of errors. An approximate method is also explained. Example applications of the general approximate methods are demonstrated for gear trains consisting of involute (spur and helical) gears, circular arc (Wildhaber-Novikov) gears, and spiral bevel gears. Gear noise measurements from a helicopter transmission are presented and discussed with relation to the kinematic precision theory.

Litvin, F. L.↗

Surface geometry of circular cut spiral bevel gears

An analysis of the surface geometry of spiral bevel gears formed by a circular cutter is presented. The emphasis is upon determining the tooth surface principal radii of curvature of crown (flat) gears. Specific results are presented for involute, straight, and hyperbolic cutter profiles. It is shown that the geometry of circular cut spiral bevel gears is somewhat simpler than a theoretical logarithmic spiral bevel gear.

Huston, R. L.↗

Thermal Elastohydrodynamic Lubrication of Spur Gears

Analysis and computer program (TELSGE) predict variations of dynamic load and surface temperature and lubricant film thickness along contacting path of pair of involute spur gears. Analysis of dynamic load includes effect of gear inertia, effect of load sharing of adjacent teeth, and effect of variable tooth stiffness obtained by element method. TELSGE written in FORTRAN IV.

Wang, K. L.↗

Modifications and testing of a 4-95 Stirling engine for solar applications

The modifications and testing of a standard Stirling engine, required for connection to a 25 kW induction alternator, for use with a solar thermal parabolic dish electric module is described. Power was absorbed by a GE induction alternator connected to the utility grid. Also included are the results from recent testing of another solar engine at the DOE-Georgia Tech solar site. It was done in parallel with the testing at Edwards for the purpose of comparing performance of two solar-only receivers, which were based on the standard 4-95 involute heat exchanger.

Nelving, H. G.↗