SEARCH · Search NASA

Results for “Kinematic viscosity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Acceleration wave breakup of liquid jets with airstreams

Characteristic mean drop diameters were determined for downstream and upstream injection into nonswirling and swirling airflows. The effects of the aerodynamic and liquid surface forces on the mean drop size were obtained with a scanning radiometer. Water jet breakup was studied primarily in the acceleration wave regime with values of WeRe 10 to the 6th power and the following empirical expression was obtained: D(o)/D(m) =C (WeRe) to the 0.4, power where D(o) and D(m) are the orifice and mean drop diameters, respectively. We and Re are the Weber and Reynolds numbers defined as repectively, We = rho(a)D(o)V(r)/sigma and Re = D(o)V(r)/nu, where V(r) and rho(a) are airstream relative velocity and density, respectively, and sigma and nu are surface tension and kinematic viscosity of the liquid, respectively. The proportionally constant C was evaluated as follows: for downstream injection, C = 0.023 with nonswirling airflow, and C = 0.027 with swirling airflow. For upstream injection, the empirical expression D(o)/D(m) = 0.0045 (WeRe) to the 0.5 power was obtained with nonswirling airflow. Experimental conditions included a water flow rate of 68 liter per hour and an airflow rate per unit area range of 4.6 to 25.2 gm/sq cm sec at 293 K and atmospheric pressure.

Ingebo, R. D.↗

NASA NTRS1981

Density waves in Saturn's rings

Certain radial brightness variations in the outer Cassini division of Saturn's rings may be spiral density waves driven by Saturn's large moon Iapetus, in which case a value of approximately 16 g/sq cm for the surface density is calculated in the region where the waves are seen. The kinematic viscosity in the same region is approximately 170 sq cm/s and the vertical scale height of the ring is estimated to be a maximum of approximately 40 m.

Cuzzi, J. N.↗

NASA NTRS1982

A hydrodynamic model of an outer hair cell

On the model it is possible to measure the force and the force direction for each individual hair as a function of the flow direction and velocity. Measurements were made at the man flow velocity .01 m/s, which is equivalent to a flow velocity in the real ear of about 1 micrometer/s. The kinematic viscosity of the liquid used in the model was 10,000 times higher than the viscosity of perilymph to attain hydrodynamic equality. Two different geometries for the sterocilia pattern were tested. First the force distribution for a W-shaped sterocilia pattern was recorded. This is the sterocilia pattern found in all real ears. It is found that the forces acting on the hairs are very regular and perpendicular to the legs of the W when the flow is directed from the outside of the W. When the flow is reversed, the forces are not reversed, but are much more irregular. This can eventually explain the half wave rectification of the nerve signals. As a second experiment, the force distribution for a V-shaped sterocilia pattern was recorded. Here the forces were irregular both when the flow was directed into the V and when it was directed against the edge of the V.

Jacobson, B. O.↗

NASA NTRS1982

A high-Reynolds-number seal test facility: Facility description and preliminary test data

A facility has been developed for testing the leakage and rotordynamic characteristics of interstage-seal configurations for the HPFTP (High Pressure Fuel Turbopump) of the SSME (Space Shuttle Main Engine). Axial Reynolds numbers on the order of 400,000 are realized in the test facility by using a Dupont freon fluid called Halon (CBrF3). The kinematic viscosity of Halon is of the same order as the liquid hydrogen used in the HPFTP. Initial testing has focused on the current flight configurations (a three-segment, stepped unit) and a convergent-taper candidate.

Childs, D. W.↗

NASA NTRS1982

Tests of blending and correlation of distillate fuel properties

The development of a fuel test matrix, results from tests of several blends of distillate aircraft fuels, and the use of correlations in formulation determination during a NASA-sponsored program to identify new aircraft fuels are described. The program was initiated in order to characterize fuel blends which are appropriate for different types of combustors in use and under development. The fuels were required to feature a specified range of properties. Attention is given to fuel volatility, hydrogen content, aromatic content, freezing point, kinematic viscosity, and naphthalene content. Paraffinic and naphtenic base stocks were employed, using alkyl benzene, naphthene benzenes, and naphthalenes to adjust the blend properties. Categories for the test fuels comprised source-controlled and composition controlled fuels. Test results and compositions of various fuels are provided.

Erwin, J.↗

NASA NTRS1982

Bubble motion in a rotating liquid body

The behavior of a single gas bubble inside a rotating liquid-filled sphere has been investigated analytically and experimentally as part of ground-based investigations aimed at aiding in the design and interpretation of Shuttle experiments. In the analysis, a quasi-static description of the motion of a bubble was developed in the limit of small values of the Taylor number. A series of rotation experiments using air bubbles and silicone oils were designed to match the conditions specified in the analysis, i.e., the bubble size, sphere rotation rate, and liquid kinematic viscosity were chosen such that the Taylor number was much less than unity. The analytical description predicts the bubble velocity and its asymptotic location. It is shown that the asymptotic position is removed from the axis of rotation.

Annamalai, P.↗

NASA NTRS1985

Numerical study of large-eddy breakup and its effect on the drag characteristics of boundary layers

The break-up of a field of eddies by a flat-plate obstacle embedded in a boundary layer is studied using numerical solutions to the two-dimensional Navier-Stokes equations. The flow is taken to be incompressible and unsteady. The flow field is initiated from rest. A train of eddies of predetermined size and strength are swept into the computational domain upstream of the plate. The undisturbed velocity profile is given by the Blasius solution. The disturbance vorticity generated at the plate and wall, plus that introduced with the eddies, mix with the background vorticity and is transported throughout the entire flow. All quantities are scaled by the plate length, the unidsturbed free-stream velocity, and the fluid kinematic viscosity. The Reynolds number is 1000, the Blasius boundary layer thickness is 2.0, and the plate is positioned a distance of 1.0 above the wall. The computational domain is four units high and sixteen units long.

Kinney, R. B.↗

NASA NTRS1984

Ring particles - Collisional interactions and physical nature

Attention is given to the properties of, and dynamical processes affecting individual particles of Saturn's rings. Because particles tend to be gravitationally bound when located on the surfaces of larger particles, and since net tidal stresses within the particles are small, particle collisions should produce accretion in Saturn's rings. Rapid accretionary processes within the rings are counterbalanced by tidal disruption of the larger accreted aggregates, which are presently designated 'dynamic ephemeral bodies'. The coefficient of restitution is probably very low, implying that the large particles containing most of the rings' mass are in a monolayer, although the small particles responsible for most of the rings' visible cross section form a layer many particles thick. Kinematic viscosity and interparticle erosive process models should incorporate these properties.

Weidenschilling, S. J.↗

NASA NTRS1985

Growth of a diffusion flame in the field of a vortex

In the present study of the growth of a diffusion flame in the field of a vortex, the motion in the core is converted into a solid body rotation. The flame extension and distortion kinematics are presented, and the effect of the local flow field on local flame structure is analyzed in detail. The combustion field is found to consist of a totally reacted core region whose radius is time-dependent, and an external flame region which consists of a pair of spiral arms that extend at large radii toward their original positions on the horizontal axis. Two similarity rules are formulated which are independent of kinematic viscosity.

Marble, F. E.↗

NASA NTRS1986

Crystal-Growing Crucible To Suppress Convection

Platform under growth region stabilizes melt for more uniform crystal growth. In new crucible, platform just below growth interface so melt is too shallow to support convection. Critical depth for onset of pertinent instability calculated from heat flux through surface of melt, volume coefficient of thermal expansion, thermal conductivity, thermal diffusivity, and kinematic viscosity.

Richter, R.↗

NASA NTRS1986

Measurement and prediction of flow through a replica segment of a mildly atherosclerotic coronary artery of man

Pressure distributions were measured along a hollow vascular axisymmetric replica of a segment of the left circumflex coronary artery of man with mildly atherosclerotic diffuse disease. A large range of physiological Reynolds numbers from about 60 to 500, including hyperemic response, was spanned in the flows investigation using a fluid simulating blood kinematic viscosity. Predicted pressure distributions from the numerical solution of the Navier-Stokes equations were similar in trend and magnitude to the measurements. Large variations in the predicted velocity profiles occurred along the lumen. The influence of the smaller scale multiple flow obstacles along the wall (lesion variations) led to sharp spikes in the predicted wall shear stresses. Reynolds number similarity was discussed, and estimates of what time averaged in vivo pressure drop and shear stress might be were given for a vessel segment.

Back, L. H.↗

NASA NTRS1986

Viscous pumping and the spin-down of thermospheric gyres and jets

Strong gyres and jets can be generated at auroral latitudes in the thermosphere by enhanced electric fields during geomagnetic substorms. Typical height profiles of ion density suggest that the ion drag force should generate large curvature in the vertical profile of the winds in the highly viscous region of the thermosphere above about 200 km. It is proposed that the poststorm spin-down of these gyres and jets proceeds via Ekman circulations driven by the curvatures in the height profiles of the winds. Analytic and numerical calculations of the ageostrophic winds forced by curvature in model geostrophic wind profiles show that the ageostrophic wind speeds and directions depend mainly on the kinematic viscosity in the region of curvature and the total change in shear in the geostrophic wind. Ageostrophic wind speeds for typical thermospheric jets can exceed 200 m/s (about 50 percent of the jet winds). Spin-down times of thermospheric jets and cyclonic gyres by the Ekman pumping mechanism are estimated at less than about 6 hours.

Walterscheid, R. L.↗

NASA NTRS1988

On the smallest scale for the incompressible Navier-Stokes equations

It is proven that for solutions to the two- and three-dimensional incompressible Navier-Stokes equations the minimum scale is inversely proportional to the square root of the Reynolds number based on the kinematic viscosity and the maximum of the velocity gradients. The bounds on the velocity gradients can be obtained for two-dimensional flows, but have to be assumed to be three-dimensional. Numerical results in two dimensions are given which illustrate and substantiate the features of the proof. Implications of the minimum scale result to the decay rate of the energy spectrum are discussed.

Henshaw, W. D.↗

NASA NTRS1988

Evolution of inclined galactic gas disks. I - A cloud-fluid approach

In this paper, numerical models are developed to follow the time-dependent behavior of inclined gas disks in nonspherical galaxies. Differential equations are developed which describe the time rate of change of the orbits of mass elements composing a thin, smoothly warping and twisting gas disk. These equations include multiple moments due to the nonsphericity of the galactic mass distribution, Coriolis effects arising from determination of orbits in a reference frame which tumbles with the surface figure of the galaxy, and viscous forces arising from cloud-cloud collisions. A cloud-fluid approach is used in determining the viscous forces. Physical arguments are used to determine the maximum permissible local value of the coefficient of kinematic viscosity. For small initial inclinations, analytic expressions are obtained for the inclination as a function of time and for the settling time, and the features of the solution are discussed.

Steiman-Cameron, Thomas Y.↗

NASA NTRS1989

Large eddy simulation of the flow in a transpired channel

The flow in a transpired channel has been computed by large eddy simulation. The numerical results compare very well with experimental data. Blowing decreases the wall shear stress and enhances turbulent fluctuations, while suction has the opposite effect. The wall layer thickness normalized by the local wall shear velocity and kinematic viscosity increases on the blowing side of the channel and decreases on the suction side. Suction causes more rapid decay of the spectra, larger mean streak spacing and higher two-point correlations. On the blowing side, the wall layer structures lie at a steeper angle to the wall, whereas on the suction side this angle is shallower.

Piomelli, Ugo↗

NASA NTRS1989

On the smallest scale for the incompressible Navier-Stokes equations

It is proven that for solutions to the two-and three-dimensional incompressible Navier-Stokes equations, the minimum scale is inversely proportional to the square root of the Reynolds number based on the kinematic viscosity and the maximum of the velocity gradients. The bounds on the velocity gradients can be obtained for two-dimensional flows, but have to be assumed to be three-dimensional. Numerical results in two dimensions are given which illustrate and substantiate the features of the proof. Implications of the minimum scale result to the decay rate of the energy spectrum are discussed.

Henshaw, W. D.↗

NASA NTRS1990

Surface Reorientation and Settling in Cylinders upon Step Reduction in Gravity

A large literature exists concerning the equilibrium configurations of free liquid/gas surfaces in reduced gravity environments. Such conditions generally yield surfaces of constant curvature contracting the container wall at a particular angle. The time required to reach and stabilize about this configuration is less studied for the case of sudden changes in gravity level; e.g., from normal- to low-gravity, as can occur in many drop tower experiments. The particular interest here was to determine the total reorientation time for such surfaces in cylinders, as a function primarily of contact angle and kinematic viscosity, in order to aid in the development of drop tower experiment design. A large parametric range of tests were performed and, based on an accompanying scale analysis, the complete data set was correlated. The results of other investigations are included for comparison.

Weislogel, Mark M.↗

NASA NTRS1990

Surface settling in partially filled containers upon step reduction in gravity

A large literature exists concerning the equilibrium configurations of free liquid/gas surfaces in reduced gravity environments. Such conditions generally yield surfaces of constant curvature meeting the container wall at a particular (contact) angle. The time required to reach and stabilize about this configuration is less studied for the case of sudden changes in gravity level, e.g. from normal- to low-gravity, as can occur in many drop tower experiments. The particular interest here was to determine the total reorientation time for such surfaces in cylinders (mainly), as a function primarily of contact angle and kinematic viscosity, in order to aid in the development of drop tower experiment design. A large parametric range of tests were performed and, based on an accompanying scale analysis, the complete data set was correlated. The results of other investigations are included for comparison.

Weislogel, Marl M.↗