Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEAD OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Local Anodic Oxidation of Graphene Layers on SiC

A method of local anodic oxidation has been used to obtain graphene-oxide regions on SiC. The change of the surface properties was confirmed by atomic-force microscopy and Raman spectroscopy. Experimental data were obtained on the conductivity, potential, and topography of the oxidized regions. It was shown that the oxidation leads to a rise in the surface potential. A relationship was found between oxidation parameters, such as the scanning velocity and the probe voltage. The method of local anodic oxidation was used to obtain by lithography an ~20-nm-wide nanoribbon and an ~10-nm-wide nanoconstriction.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Determination of preferential binder oxidation in HTGR matrix material subjected to high temperature steam

Graphitic matrix material encapsulates tristructural isotropic (TRISO) coated fuel particles and is a structural component for both pebble and cylindrical fuel compacts in high temperature gas reactor (HTGR) designs. In an off-normal event involving steam exposure, the matrix material is exposed to oxidants, leading to degradation of the fuel compact and subsequent exposure of the TRISO particle fuel to oxidizing species. This study presents microstructural characterization of matrix material after exposure to high temperature (1200°C), 48 kPa steam in which the evolved microstructure demonstrated nonuniform degradation. Subsequent Raman spectroscopy determined the nature of the remaining material post-exposure. Finally, the electron microscopy characterization suggests and Raman spectroscopic analysis confirms, under off-normal conditions, the carbonized phenolic resin binder is preferentially oxidized ahead of the graphite flake filler and is responsible for the nonuniform degradation and enhanced depth of attack.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Analytical Chemistry and Materials Characterization Results for Debris Recovered from Nitrate Salt Waste Drum S855793

Solid debris was recovered from the previously-emptied nitrate salt waste drum S855793. The bulk sample was nondestructively assayed for radionuclides in its as-received condition. Three monoliths were selected for further characterization. Two of the monoliths, designated Specimen 1 and 3, consisted primarily of sodium nitrate and lead nitrate, with smaller amounts of lead nitrate oxalate and lead oxide by powder x-ray diffraction. The third monolith, Specimen 2, had a complex composition; lead carbonate was identified as the predominant component, and smaller amounts of nitrate, nitrite and carbonate salts of lead, magnesium and sodium were also identified. Microfocused x-ray fluorescence (MXRF) mapping showed that lead was ubiquitous throughout the cross-sections of Specimens 1 and 2, while heteroelements such as potassium, calcium, chromium, iron, and nickel were found in localized deposits. MXRF examination and destructive analysis of fragments of Specimen 3 showed elevated concentrations of iron, which were broadly distributed through the sample. With the exception of its high iron content and low carbon content, the chemical composition of Specimen 3 was within the ranges of values previously observed in four other nitrate salt samples recovered from emptied waste drums.

Inorganic, Organic, Physical, & Analytical Chemist↗
DOE OSTI2022

Size effects and active state formation of cobalt oxide nanoparticles during the oxygen evolution reaction

Water electrolysis is a key technology to establish CO 2 -neutral hydrogen production. Nonetheless, the near-surface structure of electrocatalysts during the anodic oxygen evolution reaction (OER) is still largely unknown, which hampers knowledge-driven optimization. Here using operando X-ray absorption spectroscopy and density functional theory calculations, we provide quantitative near-surface structural insights into oxygen-evolving CoO x (OH) y nanoparticles by tracking their size-dependent catalytic activity down to 1 nm and their structural adaptation to OER conditions. We uncover a superior intrinsic OER activity of sub-5 nm nanoparticles and a size-dependent oxidation leading to a near-surface Co–O bond contraction during OER. We find that accumulation of oxidative charge within the surface Co 3+ O 6 units triggers an electron redistribution and an oxyl radical as predominant surface-terminating motif. This contrasts the long-standing view of high-valent metal ions driving the OER, and thus, our advanced operando spectroscopy study provides much needed fundamental understanding of the oxygen-evolving near-surface chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Assessment of strontium oxide functionalized graphene nanoflakes for enhanced photocatalytic activity: A density functional theory approach

A series of strontium oxide functionalized graphene nanoflakes were designed and their optoelectronic properties were studied for enhanced photocatalytic activity. The efficiency of designed molecules was studied using various parameters such as HOMO-LUMO energy gap, light harvesting efficiency and exciton binding energy. The computed results show that by increasing the degree of functionalization of strontium oxide leads to lowering the band gap of hydrogen terminated graphene nanoflakes. Furthermore, the study explores the role of strontium oxide functionalization in Frontier Molecular Orbitals, ionization potential, electron affinity, exciton binding energy and light harvesting efficiency of designed molecules. The infrared and Raman spectra were simulated for pure and SrO functionalized graphene nanoflakes. The electron rich and electron deficient regions which are favorable for electrophilic and nucleophilic attacks respectively were analyzed using molecular electrostatic potential surface analysis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Effects of oxidation and impurities in lithium surfaces on the emitting wall plasma sheath

The use of lithium as a surface coating in fusion devices improves the plasma performance, but the change in the wall properties affects the secondary electron emission properties of the material. Lithium oxidizes easily, which drives the emission yield well above unity. We present here simulations demonstrating the change in the sheath structure from monotonic to the nonmonotonic space-charge limited sheath using an energy-dependent data-driven emission model, which self-consistently captures both secondary emission and backscattering populations. Increased secondary electron emission from the material has ramifications for the degradation and erosion of the wall. The results show that the oxidation leads to an increased electron energy flux into the wall and a reduced ion energy flux. The net transfer of energy to the surface is significantly greater for the oxidized case than for the pure lithium case. High backscattering rates of low-energy particles lead to a high re-emission rate at the wall.

Fusion reactors↗
DOE OSTI2020

Controllable depolymerization of lignin using carbocatalyst graphene oxide under mild conditions

Many efforts have been devoted to depolymerizing lignin to high-value aromatic monomers. However, a controllable and complete lignin inter-unit bond cleavage remains difficult because of the randomness in lignin structure and low selectivity in catalysis. Herein, we demonstrate that a sole carbocatalyst graphene oxide (GO) can selectively oxidize aryl- and alkyl-hydroxyl groups of lignin without the presence of any additional oxidizers, leading to lignin degradation under mild conditions. The results from lignin dimers, lignin oligomers, and organosolv lignin indicate that the depolymerization is catalyzed via an oxidative mechanism through an enol ether intermediate, a stable intermediate that has been chemically isolated here. Quantum chemistry calculations at the density functional theory level indicate that the phenolic –OH group in lignin facilitates the formation of radical cations and thus prohibits ring opening reactions, leading to the complete conversion of lignin dimers to guaiacol through the enol ether intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Influence of Chemistry and Misfit Dislocation Structure on Dopant Segregation at Complex Oxide Heterointerfaces

Complex oxide heterostructures and thin films have emerged as promising candidates for diverse applications. Lattice mismatch between the two oxides lead to the formation of misfit dislocations, which influence vital material features. Trivalent dopant segregation to misfit dislocations at semi-coherent oxide heterointerfaces, while not well understood, is anticipated to impact interface-governed properties. Atomistic simulations elucidating the influence of misfit dislocations on dopant segregation at SrTiO 3 /MgO heterointerfaces are reported. SrO- and TiO 2 -terminated interfaces that have differing misfit dislocation structure were considered for trivalent dopants segregation. At SrO-terminated interface, dopants tend to segregate toward but not precisely to the heterointerface, whereas at TiO 2 -terminated interface, dopants exhibit a thermodynamic preference to accumulate at the heterointerface. Most favorable segregation sites at SrO-terminated interface are located within the coherent terrace, whereas those at TiO 2 -terminated interface are at misfit dislocation intersections. Atomic layer chemistry and the resulting misfit dislocation structure at the heterointerface, along with concomitant strain at the heterointerface due to mismatched dopants, play a critical role in influencing the observed trends for dopant segregation. Overall, the present results offer a fundamental atomic scale perspective of dopant behavior at semi-coherent complex oxide heterointerfaces and the interplay between dopant chemistry, interface chemistry, and misfit dislocation structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2000

Elevated Tropospheric Ozone Over the South Tropical Atlantic in January-February 1999: An Ozone Paradox Due to Interhemispheric Transport, Lightning, or Stratospheric Exchange?

On this first North American to southern African oceanographic cruise with ozonesonde launches (January and February 1999 on board the NOAA Research Vessel Ronald H Brown between Norfolk, VA, and Cape Town, South Africa) we found: (1) high ozone, CO, and aerosols off northern equatorial Africa from biomass burning, but even higher ozone concentrations off southern Africa which was not burning - an "ozone paradox"; (2) TOMS satellite evidence that south Atlantic elevated ozone in January-February 1999 was a regional feature similar in extent to the well-known September-October ozone maximum. Several mechanisms are considered to explain the "ozone paradox." Convection transporting air from the lower troposphere rich in ozone and/or ozone precursors to the upper troposphere through the ITCZ (intertropical Convergence Zone) may lead to cross-hemisphere transport of pollution. This is supported by trajectory linkage of lower-tropospheric ozone maxima with smoke seen by the TOMS satellite. Lightning-generated NO (nitric oxide) leading to ozone peaks of > 100 ppbv observed at 7-10 km altitude is another explanation. The TRMM (Tropical Rainfall Measuring Mission) Lightning Imaging Sounder shows many lightning flashes over southern Africa, which trajectories link to the high-ozone layers south of the ITCZ. The highest ozone peaks in the middle troposphere correspond to very low water vapor, which may point to photochemical destruction of ozone or subsidence from the upper troposphere which had interacted with stratospheric ozone.

Thompson, Anne M.↗
DOE OSTI2022

Hydrothermal corrosion and steam oxidation behavior comparison of UAM and conventional Zry-4

Here, hydrothermal corrosion and steam exposures on ultrasonic additively manufactured (UAM) Zircaloy-4 (Zry-4) specimens were conducted to compare to wrought Zry-4 performance in both simulated pressurized water reactor (PWR) operation (330°C, 15 MPa, <50 ppb oxygen, 500h) and representative accident conditions (100% H 2 O(g) at 700, 900, and 1100°C for up to 1h). UAM Zry-4 specimens showed 50% higher mass gain in PWR conditions and 50-80% more mass gain in steam oxidation due to internal oxidation between build layers in both cases. UAM Zry-4 in 900°C steam showed breakaway oxidation leading to sample deformation. Titanium used as an interlayer in the UAM process was detected in the substrate after the 1100°C exposure. Additional experiments to better link as-built defects to oxidation behavior are needed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Oxidative control over the morphology of Cu 3 (HHTP) 2 , a 2D conductive metal–organic framework

The morphology of electrically conductive metal–organic frameworks strongly impacts their performance in applications such as energy storage and electrochemical sensing. However, identifying the appropriate conditions needed to achieve a specific nanocrystal size and shape can be a time-consuming, empirical process. Here we show how partial ligand oxidation dictates the morphology of Cu 3 (HHTP) 2 (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene), a prototypical 2D conductive metal–organic framework. Using organic quinones as the chemical oxidant, we demonstrate that partial oxidation of the ligand prior to metal binding alters the nanocrystal aspect ratio by over 60-fold. Systematically varying the extent of initial ligand oxidation leads to distinct rod, block, and flake-like morphologies. These results represent an important advance in the rational control of Cu 3 (HHTP) 2 morphology and motivate future studies into how ligand oxidation impacts the nucleation and growth of 2D conductive metal–organic frameworks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2008

Multiscale Modeling of Ablation and Pyrolysis in PICA-Like materials

During atmospheric entry of planetary probes, the thermal protection system (TIPS) of the probe is exposed to high temperatures under low pressures. In these conditions, carbonous fibrous TIPS materials may undergo oxidation leading to mass loss and wall recession called ablation. This work aims to improve the understanding of material/environment interactions through a study of the coupling between oxygen transport in the Knudsen regime, heterogeneous oxidation of carbon, and surface recession. A 3D Random Walk Monte Carlo simulation tool is used for this study. The fibrous architecture of a model material, consisting of high porosity random array of carbon fibers, is numerically represented on a 3D Cartesian grid. Mass transport in the Knudsen regime from the boundary layer to the surface, and inside this porous material is simulated by random walk. A reaction probability is used to simulate the heterogeneous oxidation reaction. The surface recession of the fibers is followed by front tracking using a simplified marching cube approach. The output data of the simulations are ablation velocity and dynamic evolution of the material porosity. A parametric study is carried out to analyze the material behavior as a function of Knudsen number for the porous media (length of the mean free path compared to the mean pore diameter) and the intrinsic reactivity of the carbon fibers. The model is applied to Stardust mission reentry conditions and explains the unexpected behavior of the TIPS material that underwent mass loss in volume.

Lachaud, Jean↗
DOE OSTI2024

The role of defect charge, crystal chemistry, and crystal structure on positron lifetimes of vacancies in oxides

Density functional theory based positron lifetime (PL) calculations for cation and oxygen monovacancies in a range of oxides—hematite, magnetite, hercynite, and alumina—have been conducted to compare the impact of defect chemistry and crystal structure on the predicted lifetimes. The role of defect charge state has also been examined. A comparison across the same type of crystalline structure but different composition shows that oxygen vacancies only induce a slight increase in the positron-electron overlap and thus barely modify the PL as compared to the bulk. A much more substantial increase of PL is observed for cation monovacancies, regardless of crystal structure or the elemental nature of the vacancy, which we ascribe to an enhanced localization of charge density around the vacant site. The structural and compositional richness of the oxide leads to longer defect PLs, with defected hercynite exhibiting the longest PLs. The charge state of cation monovacancies modifies only by a small percentage the positron localization, relegating to secondary importance the metal defect's oxidation state in modifying the lifetime of positrons within vacancy traps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Revisiting the assignment of atomic charges in metal oxides based on core-level x-ray photoelectron spectra: The case of Ti in SrTiO3(001)

We demonstrate that assigning formal charges to transition metal (TM) cations based on core-level (CL) x-ray photoemission binding energies in oxides leads to physically inconsistent pictures of electronic structure. O 2p–TM 3d hybridization is well known to result in significant covalency in TM–O bonds, thereby reducing TM cation charges from their fully ionic values. However, the ionic bonding model remains the working paradigm for assigning TM CL features, and the resulting cation charges are often taken to be representative of the material under study. Here, we show that a more physically meaningful way to assign charges is to extract information about charge distributions utilizing Dirac–Hartree–Fock theory to calculate CL spectra from first principles and then use the resulting wave functions to determine charges based on orbital occupancies. TM cation charges can also be determined using density functional theory and Bader population analysis. We illustrate these two methods using the Ti 2p spectrum for SrTiO3(001) and show that the agreement between them is excellent. Significantly, the resulting Ti charge is considerably lower than the formal charge. The high degree of similarity between the Ti 2p spectrum for SrTiO3 and those for the rutile and anatase polymorphs of TiO2 suggests that the charge densities surrounding Ti in the latter materials are similar to that in SrTiO3. Taking a broader perspective, oxides containing other first-row transition metals also exhibit covalent character, leading to TM cation charges lower than the analogous fully ionic values in these materials as well.

Chambers, Scott A. (ORCID:000000025415043X)↗
DOE OSTI2021

Tailoring the Local Environment of Platinum in Single‐Atom Pt 1 /CeO 2 Catalysts for Robust Low‐Temperature CO Oxidation

Abstract A single‐atom Pt 1 /CeO 2 catalyst formed by atom trapping (AT, 800 °C in air) shows excellent thermal stability but is inactive for CO oxidation at low temperatures owing to over‐stabilization of Pt 2+ in a highly symmetric square‐planar Pt 1 O 4 coordination environment. Reductive activation to form Pt nanoparticles (NPs) results in enhanced activity; however, the NPs are easily oxidized, leading to drastic activity loss. Herein we show that tailoring the local environment of isolated Pt 2+ by thermal‐shock (TS) synthesis leads to a highly active and thermally stable Pt 1 /CeO 2 catalyst. Ultrafast shockwaves (>1200 °C) in an inert atmosphere induced surface reconstruction of CeO 2 to generate Pt single atoms in an asymmetric Pt 1 O 4 configuration. Owing to this unique coordination, Pt 1 δ+ in a partially reduced state dynamically evolves during CO oxidation, resulting in exceptional low‐temperature performance. CO oxidation reactivity on the Pt 1 /CeO 2 _TS catalyst was retained under oxidizing conditions.

Jiang, Dong↗
DOE OSTI2025

Decoupling the catalytic and degradation mechanisms of cobalt active sites during acidic water oxidation

Advancement of iridium-free catalysts for the low-pH oxygen evolution reaction (OER) is required to enable multi-gigawatt-scale proton-exchange water electrolysis. Cobalt-based materials might address this requirement, but little is known about the mechanism of operation of these OER catalysts at low pH. Here we investigate the nature and evolution of the active cobalt sites along with charge- and mass-transfer processes that support their catalytic function within a cobalt–iron–lead oxide material using in situ spectroscopic, gravimetric and electrochemical techniques. We demonstrate that corrosion of the cobalt sites and their reformation through electrooxidation of dissolved Co 2+ do not affect the catalytic mechanism and are decoupled from the OER. The OER-coupled charge transfer is supported by Co (3+δ)+ -oxo-species, which are structurally different from those reported for alkaline/near-neutral conditions and are formed on a relatively slow timescale of minutes. These mechanistic insights might assist in developing genuinely practical catalysts for this vital technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Tailoring the Local Environment of Platinum in Single-Atom Pt 1 /CeO 2 Catalysts for Robust Low-Temperature CO Oxidation

A single-atom Pt 1 /CeO 2 catalyst formed by atom trapping (AT, 800 degrees C in air) shows excellent thermal stability but is inactive for CO oxidation at low temperatures owing to over-stabilization of Pt 2+ in a highly symmetric square-planar Pt 1 O 4 coordination environment. Reductive activation to form Pt nanoparticles (NPs) results in enhanced activity; however, the NPs are easily oxidized, leading to drastic activity loss. In this work, we show that tailoring the local environment of isolated Pt 2+ by thermal-shock (TS) synthesis leads to a highly active and thermally stable Pt 1 /CeO 2 catalyst. Ultrafast shockwaves (>1200 degrees C) in an inert atmosphere induced surface reconstruction of CeO 2 to generate Pt single atoms in an asymmetric Pt 1 O 4 configuration. Owing to this unique coordination, Pt 1 δ+ in a partially reduced state dynamically evolves during CO oxidation, resulting in exceptional low-temperature performance. CO oxidation reactivity on the Pt 1 /CeO 2 _TS catalyst was retained under oxidizing conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Effect of Heat Treatment on the Electrical Properties of Thin Yttrium-Doped In{sub 2}O{sub 3} Films

Thin indium oxide films and In–Y–O films containing 0.7 to 3.6 at % Y have been grown by ionbeam sputtering of an indium target and a composite (indium + weighed amounts of yttrium) target in a mixture of argon and oxygen. The thin indium oxide films have a cubic crystal structure (sp. gr. Ia3̄). The incorporation of yttrium atoms into indium oxide leads to the formation of an amorphous structure in the as-grown films and an increase in their room-temperature electrical resistance by several orders of magnitude. Lowtemperature electrical resistance data indicate a change in conduction mechanism. High-temperature heat treatment of the thin In–Y–O films leads to the crystallization of their amorphous structure and an increase in their electrical resistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗