Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEGEND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

The application of remote sensing technology to the solution of problems in the management of resources in Indiana

The author has identified the following significant results. Of the sampling techniques considered, a combination soil mapping and area sampling offered the most practical method for gathering soils data. Using the dot grid count, a relative percentage composition of soils can be calculated for each spectral class. From these percentages, a legend describing the dominant soils and inclusions can be developed. Interval drainage class seemed to be correlated with magnitude. For every parent material area, the more poorly drained soils had a lower magnitude of reflectance. Soil spectral classes seemed to be predominantly one internal drainage class.

Weismiller, R. A.↗

Volcanic features of Hawaii. A basis for comparison with Mars

Despite the difference in size Martian and Hawaiian volcanoes have numerous characteristics in common. Specific features such as lava channels, collapsed lava tubes, levees and flow fronts, all very common in Hawaii, are also abundant on the flanks of some of the Martian volcanoes. Striking differences also exist, such as the apparent lack of radial rift zones on some Martian volcanoes and the paucity of cinder and spatter cones. Some of the best photographs of Martian and Hawaiian volcanic features are presented. Descriptive legends are provided for each picture. An overview of the geological processes and structures depicted is included.

Carr, M. H.↗

Appendix E: Research papers. Use of remote sensing in landscape stratification for environmental impact assessment

A refinement to the matrix approach to environmental impact assessment is to use landscape units in place of separate environmental elements in the analysis. Landscape units can be delineated by integrating remotely sensed data and available single-factor data. A remote sensing approach to landscape stratification is described and the conditions under which it is superior to other approaches that require single-factor maps are indicated. Flowcharts show the steps necessary to develop classification criteria, delineate units and a map legend, and use the landscape units in impact assessment. Application of the approach to assessing impacts of a transmission line in Montana is presented to illustrate the method.

Stanturf, J. A.↗

Relation of the activities of the IPDF/INPE project (reforestation subproject) during the year 1979

The state of Mato Grosso do Sul was selected as the study area to define the recognizable classes of Eucalyptus spp. and Pinus spp. by visual and automatic analyses. For visual analysis, a preliminary interpretation key and a legend of 6 groups were derived. Based on these six groups, three final classes were defined for analysis: (1) area prepared for reforestation; (2) area reforested with Eucalyptus spp.; and (3) area reforested with Pinus spp. For automatic interpretation the area along the highway from Ribas do Rio Pardo to Agua Clara was classified into the following classes: eucalytus, bare soil, plowed soil, pine and "cerrado". The results of visual analysis show that 67% of the reforested farms have relative differences in area estimate below 5%, 22%, between 5% and 10%; and 11% between 10% and 20%. The reforested eucalyptus area is 17 times greater than the area of reforested pine. Automatic classification of eucalyptus ranged from 73.03% to 92.30% in the training areas.

Dejesusparada, N.↗

The use of large-scale aerial photography for interpreting Landsat digital data in an elk habitat-analysis project

Large-scale aerial photography was used to interpret Landsat multispectral scanner data processed through an unsupervised classifier. After scale adjustment and interpretation by application of an elk-habitat photointerpretation legend, the photographs were registered with the spectral classification, and the co-occurrence of spectral picture elements with photointerpreted habitat classes was tabulated. Analysis of the resulting table of data permitted the description of spectral classes in terms meaningful and useful to elk research and management unit in the Blue Mountains of northeastern Oregon.

Isaacson, D. L.↗

Vegetation survey in Amazonia using LANDSAT data

Automatic Image-100 analysis of LANDSAT data was performed using the MAXVER classification algorithm. In the pilot area, four vegetation units were mapped automatically in addition to the areas occupied for agricultural activities. The Image-100 classified results together with a soil map and information from RADAR images, permitted the establishment of the final legend with six classes: semi-deciduous tropical forest; low land evergreen tropical forest; secondary vegetation; tropical forest of humid areas, predominant pastureland and flood plains. Two water types were identified based on their sediments indicating different geological and geomorphological aspects.

Parada, N. D. J.↗

Periodicities in the occurrence of aurora as indicators of solar variability

A compilation of records of the aurora observed in China from the Time of the Legends (2000 - 3000 B.C.) to the mid-18th century has been used to infer the frequencies and strengths of solar activity prior to modern times. A merging of this analysis with auroral and solar activity patterns during the last 200 years provides basically continuous information about solar activity during the last 2000 years. The results show periodicities in solar activity that contain average components with a long period (approx. 412 years), three middle periods (approx. 38 years, approx. 77 years, and approx. 130 years), and the well known short period (approx. 11 years).

Nian-Zu, D.↗

Automation of crew procedures using multifunction display and control systems

A multifunction display and control system (MFDCS) design concept has been developed for the Orbiter spacecraft. The system provides for automation of crew procedures, fault prioritization, incorporation of checklists and procedures into the display and control system and system flexibility in response to mission variation, increased experience and advancing display and control technology. Hardware included in the system includes a multifunction keyboard using programmable legend switches, a medium size flat panel display for presentation of alphanumeric information and a color CRT for the display of schematic diagrams. The access schema for the multifunction display and control system preserves the single function capability of the present set of dedicated switches while also providing for automation of many of the checklists and procedures. A basic design feature of the system is the ability to change the relative level of automation and crew interaction without modifying the system hardware or basic software operating system.

Spiger, R. J.↗

A geographic information system for resource managers based on multi-level remote sensing data

Procedures followed in developing a test case geographic information system derived primarily from remotely sensed data for the North Cache Soil Conservation District (SCD) in northern Utah are outlined. The North Cache SCD faces serious problems regarding water allocation, flood and geologic hazards, urban encroachment into prime farmland, soil erosion, and wildlife habitat. Four fundamental data planes were initially entered into the geo-referenced data base: (1) land use/land cover information for the agricultural and built-up areas of the valley obtained from various forms of aerial photography; (2) vegetation/land cover in mountains classified digitally from LANDSAT; (3) geomorphic terrain units derived from aerial photography and soil maps; and (4) digital terrain maps obtained from DMA digital data. The land use/vegetation/land cover information from manual photographic and LANDSAT interpretation were joined digitally into a single data plane with an integrated legend, and segmented into quadrangle units. These were merged with the digitized geomorphic units and the digital terrain data using a Prime 400 minicomputer. All data planes were geo-referenced to a UTM coordinate grid.

Wheeler, D. J.↗

Experimental philosophy leading to a small scale digital data base of the conterminous United States for designing experiments with remotely sensed data

Research using satellite remotely sensed data, even within any single scientific discipline, often lacked a unifying principle or strategy with which to plan or integrate studies conducted over an area so large that exhaustive examination is infeasible, e.g., the U.S.A. However, such a series of studies would seem to be at the heart of what makes satellite remote sensing unique, that is the ability to select for study from among remotely sensed data sets distributed widely over the U.S., over time, where the resources do not exist to examine all of them. Using this philosophical underpinning and the concept of a unifying principle, an operational procedure for developing a sampling strategy and formal testable hypotheses was constructed. The procedure is applicable across disciplines, when the investigator restates the research question in symbolic form, i.e., quantifies it. The procedure is set within the statistical framework of general linear models. The dependent variable is any arbitrary function of remotely sensed data and the independent variables are values or levels of factors which represent regional climatic conditions and/or properties of the Earth's surface. These factors are operationally defined as maps from the U.S. National Atlas (U.S.G.S., 1970). Eighty-five maps from the National Atlas, representing climatic and surface attributes, were automated by point counting at an effective resolution of one observation every 17.6 km (11 miles) yielding 22,505 observations per map. The maps were registered to one another in a two step procedure producing a coarse, then fine scale registration. After registration, the maps were iteratively checked for errors using manual and automated procedures. The error free maps were annotated with identification and legend information and then stored as card images, one map to a file. A sampling design will be accomplished through a regionalization analysis of the National Atlas data base (presently being conducted). From this analysis a map of homogeneous regions of the U.S.A. will be created and samples (LANDSAT scenes) assigned by region.

Labovitz, M. L.↗

Computer program for plotting and fairing wind-tunnel data

A detailed description of the Langley computer program PLOTWD which plots and fairs experimental wind-tunnel data is presented. The program was written for use primarily on the Langley CDC computer and CALCOMP plotters. The fundamental operating features of the program are that the input data are read and written to a random-access file for use during program execution, that the data for a selected run can be sorted and edited to delete duplicate points, and that the data can be plotted and faired using tension splines, least-squares polynomial, or least-squares cubic-spline curves. The most noteworthy feature of the program is the simplicity of the user-supplied input requirements. Several subroutines are also included that can be used to draw grid lines, zero lines, axis scale values and lables, and legends. A detailed description of the program operational features and each sub-program are presented. The general application of the program is also discussed together with the input and output for two typical plot types. A listing of the program code, user-guide, and output description are presented in appendices. The program has been in use at Langley for several years and has proven to be both easy to use and versatile.

Morgan, H. L., Jr.↗

PLTTER user's guide

The PLTTER graphics system, which is part of CDDMS is discussed. CDDMS is a comprehensive system for data basing and subsequent plotting of data acquired during wind tunnel tests or from computational flow analyses. The PLTTER is a system which creates report-quality plots of data which is stored on a CDDMS data base. The Requests file system allows plot-controlling information to be arranged in the way which is most appropriate for any application. The PLTTER system features many capabilities which are especially useful when plotting wind tunnel data. The PLTTER offers a variety of page formats, different grid options and parametric curve fitting algorithms, and a powerful legend capability to identify relevant information about individual curves. One or more plots on a page can be suppressed if desired so that an established page format can be maintained. Final plot output may be standard Versatec plots, QMS Laser printer plots, or microfiche.

Barlow, A.↗

A geographic information system for resource managers based on multi-level remote sensing data

Procedures followed in developing a test case geographic information system derived primarily from remotely sensed data for the North Cache Soil Conservation District (SCD) in northern Utah are outlined. The North Cache SCD faces serious problems regarding water allocation, flood and geologic hazards, urban encroachment into prime farmland, soil erosion, and wildlife habitat. Four fundamental data planes were initially entered into the geo-referenced data base: (1) land use/land cover information for the agricultural and built-up areas of the valley obtained from various forms of aerial photography; (2) vegetation/land cover in mountains classified digitally from Landsat; (3) geomorphic terrain units derived from aerial photography and soil maps; and (4) digital terrain maps obtained from DMA digital data. The land use/vegetation/land cover information from manual photographic and Landsat interpretation were joined digitally into a single data plane with an integrated legend, and segmented into quadrangle units. These were merged with the digitized geomorphic units and the digital terrain data using a Prime 400 minicomputer. All data planes were geo-referenced to a UTM coordinate grid.

Wheeler, D. J.↗

Line plotting program using DI-3000/Grafmaker routines

A line plotting program has been developed using the DI-3000 graphics libraries and incorporates Grafmaker subroutines. The program allows multiple lines on a frame and multiple frames per run. Options such as automatic scaling, linear or single-cycle log graphs, and plot text such as titles, legends and axis labels are incorporated in the program. Greek and other fonts can be used in the plot text as well as upper and lower case text. Plot inputs are specified through a control file. The program also allows display of multiple independent data sets on a single graph.

Poppen, William A., Jr.↗

Spacesuit guidebook

This guidebook is designed to supplement the Spacesuit wall chart (WAL-114) published by the Education Affairs Division, January 1990. The wall chart depicts Astronaut Bruce McCandless on his historic first untethered spacewalk using the manned maneuvering unit. He flew on Shuttle mission 41-B, and ventured 100 meters for the Shuttle's cargo bay and returned safely. This guidebook explains in depth the elements depicted on the wall chart in see-through and cut-away perspectives. Together the wall chart and guidebook show as well as explain the inside workings of the spacesuit and its various components. Forty separate elements are identified with an accompanying numerical legend. Those elements are further explained in this guidebook along with their functions and how they work in relation to other elements. Additional chapters discuss essential components of the spacesuit such as the primary life support system and the manned maneuvering unit, and the method for donning the spacesuit.

Source record↗

General-Purpose Graphics-Library Program

NASA Device Independent Graphics Library (NASADIG) computer program is general-purpose graphics-library program for use with many computer-based-engineering and management application programs. Software offers many features providing user with flexibility in creating graphics. Includes two- and three-dimensional plotting, splines and polynomial interpolation, area blanking control, multiple log/linear axes, legends and text control, curve-thickness control, and multiple text fonts. Written in ANSI FORTRAN 77.

Rogers, Joseph E.↗

The geologic mapping of Venus using C-1 format: Sheets 75N254, 60N263

The results of geologic mapping of Venus, produced on the base of Magellan images, are presented. We submit two C-1 format geologic maps with the appropriate legend. The mapping territory was taken from Venera 15 and 16 missions and geologic maps were composed. Magellan images allow us to divide some types of the plains units to determine the lava flow direction and to map with better accuracy.

Shalimov, I. V.↗

The Tapanui region of New Zealand: Site of a Tunguska around 800 years ago?

Evidence is discussed that the wide-spread fires ca. 800 years ago which denuded the southern provinces of the South Island of New Zealand of the extensive forests present at that time were due to the entry of a large bolide into the atmosphere, the conflagration being ignited by the intense heat generated as this extraterrestrial projectile ablated/detonated in a similar manner to that of the Tunguska object of 1908. These fires led to the extinction of the giant terrestrial bird known as the Moa, and the end of the archaic epoch of Maori history known as the Moa Hunter period. This interpretation is well attested to in Maori myth and legend.

Steel, Duncan↗