Search NASA⌕ Search

SEARCH · Search NASA

Results for “LOW ALTITUDE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Evaluating Cloud Feedback Components in Observations and Their Representation in Climate Models

This study quantifies the contribution of individual cloud feedbacks to the total short-term cloud feedback in satellite observations over the period 2002–2014 and evaluates how they are represented in climate models. The observed positive total cloud feedback is primarily due to positive high-cloud altitude, extratropical high- and low-cloud optical depth, and land cloud amount feedbacks partially offset by negative tropical marine low-cloud feedback. Seventeen models from the Atmosphere Model Intercomparison Project of the sixth Coupled Model Intercomparison Project are analyzed. The models generally reproduce the observed moderate positive short-term cloud feedback. However, compared to satellite estimates, the models are systematically high-biased in tropical marine low-cloud and land cloud amount feedbacks and systematically low-biased in high-cloud altitude and extratropical high- and low-cloud optical depth feedbacks. Errors in modeled short-term cloud feedback components identified in this analysis highlight the need for improvements in model simulations of the response of high clouds and tropical marine low clouds. Our results suggest that skill in simulating interannual cloud feedback components may not indicate skill in simulating long-term cloud feedback components.

58 GEOSCIENCES↗
DOE OSTI2026

Examining Cloud Feedback Components in the Simple Cloud-Resolving E3SM Atmosphere Model (SCREAM)

Cloud feedback remains the main source of uncertainty in climate sensitivity estimated by global climate models (GCMs), largely because subgrid cloud responses are parameterized in GCMs due to their coarse resolution. Here, this study examines cloud feedback in the global 3.25-km Simple Cloud-Resolving Energy Exascale Earth System Model (E3SM) Atmosphere Model (SCREAM 3 km) through a pair of 1-yr atmosphere-only simulations with control and +4-K sea surface temperature perturbations. SCREAM 3 km produces a positive cloud feedback that falls within but at the upper end of the range of Coupled Model Intercomparison Project phase 5 (CMIP5) and CMIP phase 6 (CMIP6) models and expert judgment. The positive cloud feedback arises from positive contributions from both high- and low-level clouds, with increases in high-cloud altitude and decreases in low-cloud amount and optical depth playing key roles. The stronger-than-CMIP-average feedback is mainly attributable to the high-cloud altitude feedback, owing to cloud tops rising nearly isothermally in SCREAM 3 km. The positive low-cloud amount feedback is weaker in SCREAM than in GCMs because estimated inversion strength (EIS) increases more dramatically with warming. A coarser 12-km resolution version of SCREAM exhibits a weaker positive cloud feedback than SCREAM 3 km, mainly because its low-cloud-radiative flux is more sensitive to EIS, leading to a stronger negative low-cloud amount feedback. With this process-level assessment of cloud feedback, this study reveals where SCREAM aligns with and diverges from conventional GCMs and expert assessment, providing insights to inform further model improvement and future expert assessment.

Cloud radiative effects↗
DOE OSTI2021

New Particle Formation and Growth to Climate-Relevant Aerosols at a Background Remote Site in the Western Himalaya

New particle formation (NPF) can influence the Earth’s radiative budget when the newly formed particles grow to climate-relevant sizes. Here, we present analysis of 21-months of continuous aerosol size distribution measurements at a background remote site in the western Himalaya and provide observational evidence that newly formed particles grow to cloud condensation nuclei (CCN)-active sizes (i.e. >20-100 nm in diameter). Out of total 55 NPF events, 38 (66%) events occurred in the pre-monsoon season (March-May). NPF events were classified into those with and without pollution influence as polluted and cleaner, respectively, using black carbon data. The analysis of air mass age, based on the ratio of number concentration of Aitken to accumulation mode aerosols, indicated that NPF occurred in the relatively cleaner air masses reaching to the site. The median formation rate of 10 nm particles and particle growth rates for cleaner events were three-fold and two-fold, respectively, higher than polluted events. We present the first estimates of the survival probability of newly formed particles to 50 nm and 100 nm size, which was not attempted in an Indian environment previously. The survival probability to 50 nm particles ranged from 44 to 98%, with a mean and standard deviation of 82 ± 18%. On average, ~60% of the particles surviving to 50 nm survived to 100 nm, making the overall survival probability of 100 nm to 53 ± 31%. This indicates that the probability of nucleated particles growing to CCN-active sizes under a large source of condensing vapor (transported from nearby lower-altitude regions) and low pre-existing particle concentrations (background mountain site) is high compared to the previous studies. These findings highlight the importance of the efficiency of nucleation events for producing CCN, which is a critical basis of aerosol indirect effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

High Power Density, Carbon Neutral Electrical Power Generation for Air Vehicles

The synergistic integration of a Solid Oxide Fuel Cell-Combustor (SOFC-C) with a turbogenerator (TG) will provide a very high fuel-to-electricity conversion efficiency while maintaining high power-to-weight ratio during high-altitude flight. The proposed SOFC-C-TG power generation technology exceeds the REEACH technical performance targets (TPT). This unique concept addresses many of the challenges faced in all electric propulsion-based aviation. The system has high part-load efficiency (more than 65% lower heating value (LHV)) during long cruise times, load following capability, high-power capacity at high altitudes adapting to low temperatures and pressures, rapid startup time of less than 30 minutes (proven with current SOFC technology), high power density (more than 3.2 kW/kg), efficient thermal management, and a foundation for a compact, efficient electrical storage and power generation system (ESPG). The SOFC-C concept achieves the technology targets by reducing the complexity of traditional fuel cell-gas turbine hybrid systems (FC-GT). The SOFC-C does not require heat exchangers and dramatically reduces the balance of plant increasing power density and performance in efficiency. The reduction in mass through elimination of heat exchangers, external reformer, and other components dramatically decreases the overall thermal dampening of the system which enables rapid startup and load following capability. Direct control of the cathode inlet temperature of the SOFC-C enables rapid warm-up of the SOFC tubes with the ability to reach operating temperature and full power in less than 30 minutes.

03 NATURAL GAS↗
DOE OSTI2024

Cloud micro- and macrophysical properties from ground-based remote sensing during the MOSAiC drift experiment

In the framework of the Multidisciplinary drifting Observatory for the Study of Arctic Climate Polarstern expedition, the Leibniz Institute for Tropospheric Research, Leipzig, Germany, operated the shipborne OCEANET-Atmosphere facility for cloud and aerosol observations throughout the whole year. OCEANET-Atmosphere comprises, amongst others, a multiwavelength Raman lidar, a microwave radiometer, and an optical disdrometer. A cloud radar was operated aboard Polarstern by the US Atmospheric Radiation Measurement program. These measurements were processed by applying the so-called Cloudnet methodology to derive cloud properties. To gain a comprehensive view of the clouds, lidar and cloud radar capabilities for low- and high-altitude observations were combined. Cloudnet offers a variety of products with a spatiotemporal resolution of 30 s and 30 m, such as the target classification, and liquid and ice microphysical properties. Additionally, a lidar-based low-level stratus retrieval was applied for cloud detection below the lowest range gate of the cloud radar. Based on the presented dataset, e.g., studies on cloud formation processes and their radiative impact, and model evaluation studies can be conducted.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Origin and mitigation of wind noise on balloon-borne infrasound microbarometers

High-altitude monitoring of low-frequency acoustic waves (infrasound) on Earth has regained prominence in recent years, primarily driven by improvements in light-weight sensor technology and advances in scientific ballooning techniques. Balloon-borne infrasound monitoring is also being proposed as a remote sensing technique for planetary exploration. Contrary to ground-based infrasound monitoring, the infrasound noise background in the stratosphere as measured by a balloon remains uncharacterized and the efficacy of wind noise mitigation filters has not been investigated. In this study, an analysis of pressure data collected using infrasound microbarometers during the flight of a long-duration zero pressure balloon is presented. Here, a dramatic reduction of background noise in the stratosphere is demonstrated and it is shown that wind noise mitigation filters are not effective at reducing wind noise under these conditions. Results from this study demonstrate stratospheric balloons as a low-noise platform for infrasound monitoring and motivate the development of improved noise mitigation tools.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Tethered Balloon System (TBS) Instrument Handbook

The Tethered Balloon System (TBS) is an unmanned aerial system composed of a helium-filled balloon, tether, winch, and sensors. Individual components of the system may change with each flight based on the desired measurements, atmospheric conditions, and flight strategy. The TBS operates within the U.S. Department of Energy (DOE)’s R-2204 Restricted Airspace, which encompasses a two-nautical-mile radius centered on Oliktok Point, Alaska that is segmented by altitude into R-2204 Low (0-1,499’ MSL or 0-457 m MSL) and R-2204 High (1,500-6,999’ MSL or 457-2133 m MSL). The TBS may operate outside of R-2204 if allowed to do so under a Certificate of Authorization from the Federal Aviation Administration.

42 ENGINEERING↗
DOE OSTI2024

Unseen Winds: Harnessing High-Altitude Winds in the Southeast USA

This project aims to identify potential sites in the United States for further testing and development of airborne wind energy systems (AWES). Through industry questionnaires and interviews with AWES companies, the study assesses existing test sites' capabilities and gaps, leading to a three-tiered test site strategy: short-duration prototype demonstrations, long-duration technical assessments and power validations, and airspace interaction and deconfliction studies. Notably, the southeastern United States presents significant potential for AWES due to its lack of traditional wind turbines, which is attributed to low wind speeds at lower altitudes. However, wind conditions improve significantly at higher altitudes, making this region a promising candidate for AWES deployment. The project considers factors such as wind resources, infrastructure proximity, social acceptance, and environmental impacts to recommend sites that can support the unique needs of AWES manufacturers and facilitate their commercialization. Early findings suggest rural communities with low grid resiliency could benefit economically and technologically from hosting AWES test sites, especially with operator training centers and potential for long-term skilled employment in future disaster relief and other applications.

17 WIND ENERGY↗
DOE OSTI2021

Modeling Volatility-Based Aerosol Phase State Predictions in the Amazon Rainforest

Organic aerosol (OA) is a complex matrix of various constituents—fresh (primary organic aerosols—POA) and aged via oxidation (secondary organic aerosols—SOA), generated from biogenic, anthropogenic, and biomass burning sources. The viscosity of OA can be critical in influencing new particle formation, reactive uptake processes that impact evaporation-growth kinetics, and the lifetime of particles in the atmosphere. We report this work utilizes a well-defined relationship between volatility and viscosity for pure compounds, which we incorporated within the Weather Research and Forecasting Model coupled to chemistry (WRF-Chem) to simulate the phase state and viscosity of bulk OA during the dry-to-wet transition season (September–October) in the Amazon rainforest during 2014. Our simulations indicate spatial and temporal heterogeneity in aerosol phase state often not captured by global-scale models. We show the strong role of water associated with organic aerosol ($w_s$) as the dominant factor that can be used to quantitatively estimate OA viscosity. Analysis of WRF-Chem simulations across the entire atmospheric column indicates a strong inverse log-linear relationship between $w_s$ and OA viscosity with a correlation coefficient approaching 1, in the background and biomass burning-influenced conditions. At high altitudes where relative humidity (RH) and temperatures are low, our simulations indicate that OA exists in a semisolid-/solid-like phase state, consistent with previous studies. OA hygroscopicity is strongly correlated (ca. –0.8) with OA viscosity at RH ca. 30–50%, but this RH range is found mostly at low OA concentrations and the middle troposphere (ca. 6–10 km altitudes) in our simulated domain. OA hygroscopicity is uncorrelated with viscosity at higher-RH (near surface) and lower-RH (upper troposphere) regimes. At the urban site near surface, where day–night differences in RH are significant, RH is found to drive the phase state. At the background forested site near surface, where day–night RH differences are small, biomass burning-influenced OA is semisolid and a significant OA associated with background conditions is liquid-like. Simulations indicate a long tail of OA viscosity frequency distributions extending in the semisolid/solid regimes over background biogenic-influenced conditions due to the role of low-volatility OA components such as monoterpene oxidation products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Drones for Decommissioning

The U.S. Nuclear Regulatory Commission has responsibility for regulating the safe decommissioning of facilities and sites to meet the License Termination Rule in 10 Code of Federal Regulations (CFR) Part 20, Standards for Protection Against Radiation, Subpart E “Radiological Criteria for License Termination.” Decommissioning is performed in accordance with 10 CFR Part 50, Domestic Licensing of Production and Utilization Facilities, as part of license termination (§50.82) and release of the facility or site for unrestricted use (§50.83). The guidance currently demonstrates the minimum requirements and necessary conditions for conducting radiological surveys by a person carrying a radiation detector(s). The Pacific Northwest National Laboratory (PNNL) evaluated the use of an unoccupied aerial vehicle (UAV) to conduct radiological surveys that could be used in decommissioning to potentially reduce time, cost, and worker safety compared to current survey methods. The objective of this project was to evaluate the performance and limitations of a UAV to support a decommissioning radiological survey and compare it to a radiological survey conducted by a human. The primary research questions of interest evaluated were: 1. Did observed UAV paths differ from human paths and, if so, how much? 2. Did survey path deviation affect survey results and, if so, how? 3. Were radiological measurements from human and UAV surveys significantly different? To answer these research questions, an experimental field was set up at PNNL’s 3440 test track, and it included radiological sources commonly surveyed during decommissioning: cobalt-60 (Co-60), cesium-137 (Cs-137), and americium-241 (Am-241). Nine check sources (three each of Am-241, Cs-137, and Co-60) with activities ranging from 3.54 µCi to 39.34 µCi were set over a path that also included an area for measuring background radiation. An Aurelia X6 UAV coupled with a GPS and lidar unit was used to conduct the radiological surveys. UAV and human surveys were conducted using two different NaI(Tl) scintillation radiation detectors (2 in. × 2 in. Ludlum, Inc. and 2 in. × 0.04 in. Alpha Spectra, Inc.) at a travel velocity of approximately 0.2 m/s at a low (15–40 cm median altitude) or high (87–105 cm median altitude) survey altitude. Since the survey velocity and altitude parameters were atypical for normal UAV operations, testing was done prior to conducting the radiological surveys to establish airworthiness, evaluate the navigation system, and establish flight control. Human and UAV surveys were paired according to the detector type and altitude regime to compare the survey data. The results of this proof-of-concept research determined that the UAV and human surveys followed similar survey paths and detected the radiological sources with no significant statistical difference (in 33 out of 36 surveys). However, further research is needed prior to deploying UAVs for decommissioning surveys.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2021

Radiation-Induced Dark Counts for Silicon Single-Photon Detectors in Space

Single-photon detectors operating on satellites for use in a quantum communications network can incur large dark-count-rate increases from the natural radiation environment of space. Displacement damage to the material lattice of a detector from the ionizing radiation can result in a permanent dark-count increase in the detector. In this work, we analyze the radiation-induced dark-count rate of a silicon single-photon avalanche diode onboard a satellite at different orbiting altitudes, as well as, the additional radiation from a nuclear-disturbed environment caused by a high-altitude nuclear explosion. For detectors on low Earth orbit satellites, protons are the biggest source of radiation damage and are best mitigated by choosing an orbit that minimizes exposure when passing through the South Atlantic Anomaly and Polar Cusps. Detectors on medium Earth orbit and geostationary orbit satellites, if shielded by more than 10 mm of aluminum, provide the best platform in terms of the least amount of radiation damage to the detectors. In the event of a high-altitude nuclear explosion, the artificial radiation belts produced by the explosion will cause too much damage to silicon single-photon detectors on low Earth orbit satellites and render them unfit for quantum communications in less than a day. Higher orbit satellites will only suffer minor dark-count-rate increases from the artificial radiation belts.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Vertical Structure of Radiative Heating Rates of the MJO during DYNAMO

The vertical structure of radiative heating rates over the region of the tropi-cal Indian Ocean associated with the MJO during the DYNAMO/ARM MJO Investigation Experiment is presented. The mean and variability of heating rates during active, suppressed, and disturbed phases are determined from the Paci?c Northwest National Laboratory combined remote sensing retrieval (CombRet) from Gan Island, Maldives (0.69? S, 73.15? E). TOA and surface ?uxes from the CombRet product are compared with collocated three-hourly CERES SYN1deg Ed4A satellite retrievals. The ?uxes are correlated in time with correlation coef?cients around 0.9, yet CombRet time-mean OLR is 15 W m-2 larger. Previous work has suggested that CombRet under-samples high clouds, due to attenuation by low-level clouds and reduced instrument sensitivity with altitude. However, mean OLR differs between CombRet and CERES for all values of OLR, not just the lowest values corresponding to widespread high clouds. The discrepancy peaks for mid-range OLR, sugges-tive of precipitating, towering cumulus convective clouds, rather than strati-form cirrus clouds. Biases in the cloud-top height of thick clouds substantially contribute to the overestimate of OLR by CombRet. CombRet data is used to generate composite shortwave and longwave atmospheric heating rate pro-?les as a function of the local OLR. Though there is considerable variability in CombRet not directly related to OLR, the time-height structure of mean heating rate composites generated using OLR as the interpolant is broadly representative of tropical convective variability on intraseasonal time scales.

Shell, Karen M.↗
DOE OSTI2021

On the Radiation Effects of Strontium Ions on Satellite Solar Cells in Low Earth Orbits

This study focuses on the radiation effects 19 of Sr + ions—generated from high-altitude nuclear explosions (HANE)—on satellite solar cells in low-Earth orbits (LEO). Along four selected satellite orbits, ion fluences are sampled inside the evolving Sr + distributions for days, determined from our newly developed HANE environment model. These fluences, along with the help of radiation transport codes including the MULASSIS and SRIM models, enable us to quantify the radiation damages by determining the values of total ionizing doses and the equivalent 1 MeV electron fluences for displacement damages. Comparing the dose values to existing experimental data, we conclude that HANE-generated Sr + ions have limited darkening effects to quartz solar cell coverglasses in LEO with apogees of 100s to 1000 km. In addition, with the extremely high equivalent fluences, we also conclude that these Sr+ ions may cause severe or even fatal displacement damage to exposed solar photovoltaic (PV) cells on satellites in LEO. The radiation effects of Sr + ions are much less significant for the orbits with high apogees beyond ten thousand km. We also conducted model parameter sensitivity studies on the charge exchange cross-sections, neutral atmosphere density profiles and explosion local time positions, and the above conclusions stay unchanged. The methodology developed in this study can be extended to other HANE-generated heavy ion species in the future.

14 SOLAR ENERGY↗
DOE OSTI2020

Understanding Irrigation Impacts on Low-Level Jets over the Great Plains

Low-level jets (LLJs) over the Great Plains are well-known for their importance in transporting moisture from the Gulf of Mexico and forming precipitation in the Central US. However, the impact of irrigation practice on LLJs is rarely studied. To understand the irrigation impact on the Great Plains LLJs, the Weather Research and Forecasting (WRF) model is employed with and without an irrigation scheme. The simulated wind field is evaluated against the observed wind from Midlatitude Continental Convective Clouds Experiment (MC3E). The results show that adding irrigation improves the simulated wind, especially at lower altitudes below 800 hPa. Irrigation reduces the LLJ frequency over the Great Plains, mainly by reducing the intense LLJ frequency. The reduced LLJ frequency is caused by the irrigation-induced weakening of meridional wind. The favorable conditions for LLJs have been identified by examining the mechanism associated with LLJs: a ridge-like pattern with weak and calm synoptic-scale conditions in the mid-levels and a strong west-east temperature gradient at lower levels that promote meridional winds. Irrigation-induced cooling leads to a baroclinic pattern with high pressure at lower altitudes over the irrigation region and low pressure in the mid- and upper levels in the downstream region, resulting in a northerly component that hinders the formation of LLJs. Low-level surface cooling also decreases the west-east temperature gradient and hence weakens the thermal wind forcing. The irrigation-induced mid-level low and weaker west-east temperature gradient are responsible for the reduced meridional winds and the reduced LLJ frequencies.

Yang, Zhao↗
DOE OSTI2021

Magnitude and Timing of the Tiltill Rockslide in Yosemite National Park, California

Yosemite National Park, California, is one of the best-documented sites of historical rockfalls and other rock slope failures; however, past work shows that this record does not capture the infrequent largest occurrences, prehistoric events orders of magnitude larger than the largest historic ones. These large prehistoric events are evident as voluminous bouldery landslide deposits, permitting volume and age quantification to better understand local volume–frequency relationships, potential triggering mechanisms, and the hazard such events might pose. The Tiltill rockslide in northern Yosemite is one such example, consisting of 2.1 × 10 6 m 3 ± 1.6 × 10 6 m 3 of talus (1.5 × 10 6 m 3 original volume of rock mass) that slid across the floor of Tiltill Valley, partially damming Tiltill Creek to create a seasonal pond that drains through and around the rockslide mass. This volume and the rockslide's effective coefficient of friction, 0.47, place it near the boundary between long-runout landslides and ordinary Coulomb failure. Although the rockslide superficially appears to consist of two separate lobes, statistically indistinguishable 10 Be exposure dates from eight samples indicate a single event that occurred at 13.0 ± 0.8 ka. The age of the Tiltill rockslide and its relatively low elevation compared to equilibrium line altitudes at this place and time make glacial debutressing a highly unlikely triggering mechanism. Additionally, seismic shaking associated with fault rupture along the eastern Sierra Nevada is shown to be a plausible but unverified trigger.

10Be cosmogenic nuclide exposure dating↗
DOE OSTI2023

SAF Combustion & Soot Processes [Slides]

The atomization, mixing, combustion and emissions characteristics of aviation fuels were measured using a novel approach based on a non-continuous injection scheme called the single-hole atomizer (SHA). High-speed microscopy revealed differences between fuels in terms of evaporation and mixing regimes over conditions relevant to modern and next generation aero-engine combustors. Measurements of liquid and vapor penetration, mixing fields, combustion and emissions metrics (ignition delay, lift-off length, PAH formation, soot mass) highlighted the effects of fuels and combustor conditions. The experimental results are being leveraged to adjust and validate chemical and CFD models. Detailed analysis of sampled soot showed subtle differences in soot morphology between fuels. The results revealed the presence of contaminants potentially affecting surface chemistry and the nucleation propensity of water droplets on particles. Chemical mechanisms for NJFCP A-2, C-1 and C-4 showed good performance over a large parameter space. Spray breakup at relight conditions is vastly different from the atomization observed at high pressure. CFD simulations of the SHA target conditions confirmed the good behavior of the C-1 kinetic mechanism. The simulations support the strong relationship between low and high temperature reactions. New altitude chamber facility to enable detailed characterization of the heterogeneous nucleation process of water on aerosol particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Sunlight-absorbing aerosol amplifies the seasonal cycle in low-cloud fraction over the southeast Atlantic

Abstract. The mean altitude of the smoke loading over the southeast Atlantic moves from the boundary layer in July to the free troposphere by October. This study details the month-by-month changes in cloud properties and the large-scale environment as a function of the biomass burning aerosol loading at Ascension Island (8∘ S, 14.5∘ W) from July to October, based on island measurements, satellite retrievals, and reanalysis. In July and August, the smoke loading predominantly varies within the boundary layer. During both months, the low-cloud fraction is less and is increasingly cumuliform when more smoke is present, with the exception of a late morning boundary layer deepening that encourages a short-lived cloud development. The meteorology varies little, suggesting aerosol–cloud interactions explain the cloudiness changes. September marks a transition month during which midlatitude disturbances can intrude into the Atlantic subtropics, constraining the free tropospheric aerosol closer to the African coast. Stronger boundary layer winds on cleaner days help deepen, dry, and cool much of the marine boundary layer compared to that on days with high smoke loadings, with stratocumulus reducing everywhere but at the northern deck edge. The September free troposphere is better mixed on smoky days compared to October. Longwave cooling rates, generated by a sharp water vapor gradient at the aerosol layer top, encourage a small-scale vertical mixing that could help maintain the well-mixed smoky September free troposphere. The October meteorology primarily varies as a function of the strength of the free tropospheric winds advecting aerosol offshore. The free tropospheric aerosol loading is less than in September, and the moisture variability is greater. Low-level clouds increase and are more stratiform in October when the smoke loadings are higher. The increased free tropospheric moisture can help sustain the clouds through a reduction in evaporative drying during cloud-top entrainment. Enhanced subsidence above the coastal upwelling region, increasing cloud droplet number concentrations, may further prolong cloud lifetime through microphysical interactions. Reduced subsidence underneath stronger free tropospheric winds at Ascension Island supports slightly higher cloud tops during smokier conditions. Overall, the monthly changes in the large-scale aerosol and moisture vertical structure act to amplify the seasonal cycle in low-cloud amount and morphology. This is climatically important, as cloudiness changes dominate changes in the top-of-atmosphere radiation budget.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Assessing Arctic low-level clouds and precipitation from above – a radar perspective

Most Arctic clouds occur below 2 km altitude as revealed by CloudSat satellite observations. However, recent studies suggest that the relatively coarse spatial resolution, low sensitivity, and blind zone of the radar installed on CloudSat may not enable it to comprehensively document low-level clouds. We investigate the impact of these limitations on the Arctic low- level cloud fraction, which is the amount of cloudy points with respect to all points as a function of height, derived from CloudSat radar observations. For this purpose, we leverage highly resolved vertical profiles of low-level cloud fraction derived from downlooking Microwave Radar/radiometer for Arctic Clouds (MiRAC) radar reflectivity measurements. MiRAC has been operated during four aircraft campaigns taking place in the vicinity of Svalbard during different times of the year and covering more than 25,000 km. This allows us to study the dependence of CloudSat limitations on different synoptic and surface conditions.

54 ENVIRONMENTAL SCIENCES↗