SEARCH · Search NASA

Results for “Large-eddy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Turbulent flow in a channel with a wall with progressive waves

The effects of prescribed wall motion on turbulent channel flow were examined with the objective of understanding the drag mechanisms and obtaining a possible means for drag reduction. A computer program for large-eddy simulation (LES) of turbulent flow in a channel was adapted to treat the case of time-varying wall motion using linearized boundary conditions. The code was applied to flow in a channel with prescribed wall motion on one wall. It was found that the results can be explained by a model based on a Stokes-like layer near the moving wall. This provides a theory which can be used to guide the selection of parameters. Considering both viscous and pressure drag components, it was found that net drag reduction is possible under certain conditions of wall motion. However, the work required to drive the wall motion can be greater than the reduced through-flow energy requirement. The major effects of the wall motion are restricted to the viscous sublayer of the turbulent flow.

Kuhn, G. D.↗

NASA NTRS1985

Mixing layer control for tangential slot injection in turbulent flows

Tangential injection into turbulent flows is one of the most promising methods of minimizing skin friction and providing thermal protection. The technique also has application to laser hardening. The effectiveness of the injected material can be increased if the spreading rate of the resulting mixing region can be reduced. Various techniques which have been shown to be effective in manipulating the rate of growth of mixing layers under certain conditions have been applied to a slot configuration having a thick external turbulent boundary layer. These include geometry modifications to the slot lip trailing edge and acoustic excitation of the slot exit plane over a wide range of frequencies. Neither of these approaches produced any noticeable effect on the downstream evolution of the mixing layer. This lack of effectiveness is attributed to the dominating influence of the well-developed incoming turbulent boundary layer. The placement of large-eddy breakup devices in this boundary layer upstream of the injection point did produce significantly lower velocities in the near-wall region of the flow downstream of the slot exit.

Mcinville, R. M.↗

NASA NTRS1985

Turbulent drag reduction for external flows

A summary of turbulent drag reduction approaches applicable to external flows is given. Because relatively recent and exhaustive reviews exist for laminar flow control and polymer (hydrodynamic) drag reduction, the focus here is upon the emerging areas of nonplanar geometry and large-eddy alteration. Turbulent control techniques for air generally result in modest (but technologically significant) drag reductions (order of 20 percent or less), whereas hydrodynamic approaches can yield drag reductions the order of 70 percent. Suggestions are included for alternative concepts and optimization of existing approaches.

Bushnell, D. M.↗

NASA NTRS1985

Effect of rotation on isotropic turbulence - Computation and modelling

This paper uses numerical simulation to analyse the effects of uniform rotation on homogeneous turbulence. Both large-eddy and full simulations were made. The results indicate that the predominant effect of rotation is to decrease the rate of dissipation of the turbulence and increase the lengthscales, especially those along the axis of rotation. These effects are a consequence of the reduction, due to the generation of inertial waves, of the net energy transfer from large eddies to small ones. Experiments are also influenced by a more complicated interaction between the rotation and the wakes of the turbulence-generating grid which modifies the nominal initial conditions in the experiment. The latter effect is accounted for in simulations by modifying the initial conditions. Finally, a two-equation model is proposed that accounts for the effects of rotation and is able to reproduce the experimental decay of the turbulent kinetic energy.

Bardina, J.↗

NASA NTRS1985

Renormalization group formulation of large eddy simulation

Renormalization group (RNG) methods are applied to eliminate small scales and construct a subgrid scale (SSM) transport eddy model for transition phenomena. The RNG and SSM procedures are shown to provide a more accurate description of viscosity near the wall than does the Smagorinski approach and also generate farfield turbulence viscosity values which agree well with those of previous researchers. The elimination of small scales causes the simultaneous appearance of a random force and eddy viscosity. The RNG method permits taking these into account, along with other phenomena (such as rotation) for large-eddy simulations.

Yakhot, V.↗

NASA NTRS1984

Some physical and numerical aspects of computing the effects of viscosity on fluid flow

Some physical, analytical, and computational aspects of viscous flow are examined with reference to examples of computed flows. The discussion of the physical aspects covers the development of important scales used to reference flow phenomena in laminar and turbulent shear layers; the usefulness of the concepts of circulation and vorticity; and some relatively large-scale organized structures that have recently been identified in transitional and fully developed turbulent flows. Among the analytical aspects discussed are a compact presentation of the compressible Navier-Stokes equations, the Reynolds-averaged form of these equations, and a simplified description of some forms of turbulent models. Finally, results of a simulation of the onset of transition, direct turbulence simulations, and large-eddy simulations are given.

Lomax, H.↗

NASA NTRS1986

The structure of the vorticity field in turbulent channel flow. II - Study of ensemble-averaged fields

Several conditional sampling techniques are applied to a data base generated by large-eddy simulation of turbulent channel flow. It is shown that the bursting process is associated with well-organized horseshoe vortices inclined at about 45 deg to the wall. These vortical structures are identified by examining the vortex lines of three-dimensional, ensemble averaged vorticity fields. Two distinct horseshoe-shaped vortices corresponding to the sweep and ejection events are detected. These vortices are associated with high Reynolds shear stress and hence make a significant contribution to turbulent energy production. The dependency of the ensemble averaged vortical structures on the detection criteria, and the question of whether this ensemble-averaged structure is an artifact of the ensemble averaging process are examined. The ensemble-averaged pattern of these vortical structures that emerge from the analysis could provide the basis for a hypothetical model of the organized structures of wall-bounded shear flows.

Kim, J.↗

NASA NTRS1986

Space-time correlation measurements in a compressible turbulent boundary layer

Single and dual hot-wire probes have been used to accomplish a first look at the large-eddy structure of a supersonic turbulent boundary layer. The investigation was performed in an axisymmetric turbulent boundary layer in the Ames High Reynolds Number wind tunnel. Freestream Mach number was 2.97, the boundary layer was approximately 1.2 cm thick, and Reynolds number = 15,000. Quantities measured were streamwise turbulence intensity and higher order statistics of mass-flow fluctuations, and space-time correlations of instantaneous streamwise velocity at two locations. Conditional sampling of the hot-wire signals was performed to detect the passage and describe the character of the large turbulent eddies. Results indicate that the large scale structure in compressible turbulence is similar to that at low subsonic flow speeds except at the boundary layer edge, where the intermittency region is narrowed in compressible flow.

Robinson, S. K.↗

NASA NTRS1987

Spectral multigrid methods for the solution of homogeneous turbulence problems

New three-dimensional spectral multigrid algorithms are analyzed and implemented to solve the variable coefficient Helmholtz equation. Periodicity is assumed in all three directions which leads to a Fourier collocation representation. Convergence rates are theoretically predicted and confirmed through numerical tests. Residual averaging results in a spectral radius of 0.2 for the variable coefficient Poisson equation. In general, non-stationary Richardson must be used for the Helmholtz equation. The algorithms developed are applied to the large-eddy simulation of incompressible isotropic turbulence.

Erlebacher, G.↗

NASA NTRS1987

Enhanced viscous flow drag reduction using acoustic excitation

Proper acoustic excitation of a single large-eddy break-up device can increase the resulting drag reduction and, after approximately 40 to 50 delta downstream, provide net drag reduction. Precise optimization of the input time delay, amplitude and response threshold is difficult but possible to achieve. Drag reduction is improved with optimized conditions. The possibility of optimized processing strongly suggests a mechanism which involves interaction of the acoustic waves and large eddies at the trailing edge of the large eddy break-up device. Although the mechanism for spreading of this phenomenon is unknown, it is apparent that the drag reduction effect does tend to spread spanwise as the flow convects downstream. The phenomenon is not unique to a particular blade configuration or flow velocity, although all data have been obtained at relatively low Reynolds numbers. The general repeatibility of the results for small configuration changes serves as verification of the phenomenon.

Nagel, Robert T.↗

NASA NTRS1987

Numerical simulation of a plane turbulent mixing layer, with applications to isothermal, rapid reactions

A hybrid method has been developed for the numerical prediction of turbulent mixing in a spatially-developing, free shear layer. Most significantly, the computation incorporates the effects of large-scale structures, Schmidt number and Reynolds number on mixing, which have been overlooked in the past. In flow field prediction, large-eddy simulation was conducted by a modified 2-D vortex method with subgrid-scale modeling. The predicted mean velocities, shear layer growth rates, Reynolds stresses, and the RMS of longitudinal velocity fluctuations were found to be in good agreement with experiments, although the lateral velocity fluctuations were overpredicted. In scalar transport, the Monte Carlo method was extended to the simulation of the time-dependent pdf transport equation. For the first time, the mixing frequency in Curl's coalescence/dispersion model was estimated by using Broadwell and Breidenthal's theory of micromixing, which involves Schmidt number, Reynolds number and the local vorticity. Numerical tests were performed for a gaseous case and an aqueous case. Evidence that pure freestream fluids are entrained into the layer by large-scale motions was found in the predicted pdf. Mean concentration profiles were found to be insensitive to Schmidt number, while the unmixedness was higher for higher Schmidt number. Applications were made to mixing layers with isothermal, fast reactions. The predicted difference in product thickness of the two cases was in reasonable quantitative agreement with experimental measurements.

Lin, P.↗

NASA NTRS1986

Large eddy breakup devices as low Reynolds number airfoils

Turbulent drag reduction downstream of large-eddy breakup (LEBU) devices is analyzed from the viewpoint of low-Reynolds number airfoil aerodynamics. It is argued that the variability of results between different research labs is primarily due to low Reynolds number 'phenomena' associated with unsteady separation/transition of the LEBU device boundary layer. LEBU drag reduction is shown to be an extremely sensitive function of device microgeometry at the low Reynolds numbers of all current investigations, and by analogy with conventional low-Reynolds number airfoil testing, the conclusion is drawn that the full potential for LEBU drag reduction must be explored at chord Reynolds numbers of 300,000 and above.

Anders, John B.↗

NASA NTRS1986

Turbulence modeling

A survey designed to provide an introduction to the subject of turbulence modeling, and to explain the need for such models is given. The subject is developed along chronological lines since this provides a logical development plan and also because it then moves from relatively simple phenomenological models through more complicated procedures and ultimately to the subject of large-eddy simulation.

Murphy, J. D.↗

NASA NTRS1987

On the subgrid-scale modeling of compressible turbulence

A subgrid-scale model recently derived for use in the large-eddy simulation of compressible turbulent flows is examined from a fundamental theoretical and computational standpoint. It is demonstrated that this model, which is applicable only to compressible turbulent flows in the limit of small density fluctuations, correlates somewhat poorly with the results of direct numerical simulations of compressible isotropic turbulence at low Mach numbers. An alternative model, based on Favre-filtered fields, is suggested which appears to reduce these limitations.

Speziale, C. G.↗

NASA NTRS1988

The subgrid-scale modeling of compressible turbulence

Speziale, C. G.↗

NASA NTRS1987

Use of LEBU-devices for drag reduction at flight conditions

The practical aspects of drag reduction using LEBU (large-eddy break-up) devices, turbulence manipulators, etc. in flight are discussed with the help of experience from previous flight tests. These tests have shown that appreciable reductions in local skin friction exist under flight conditions, and that the turbulence-manipulating effects can be found for swept tandem devices in transonic as well as supersonic flows. The unsteady loads experienced with the devices are discussed in connection with the frequencies occurring in this type of real flight conditions.

Bertelrud, A.↗

NASA NTRS1988

Computational and experimental studies of LEBUs at high device Reynolds numbers

The present paper summarizes computational and experimental studies for large-eddy breakup devices (LEBUs). LEBU optimization (using a computational approach considering compressibility, Reynolds number, and the unsteadiness of the flow) and experiments with LEBUs at high Reynolds numbers in flight are discussed. The measurements include streamwise as well as spanwise distributions of local skin friction. The unsteady flows around the LEBU devices and far downstream are characterized by strain-gage measurements on the devices and hot-wire readings downstream. Computations are made with available time-averaged and quasi-stationary techniques to find suitable device profiles with minimum drag.

Bertelrud, Arild↗

NASA NTRSDate not supplied

The NASA Turbulent Heat Flux Experiments: Summary and Lessons Learned

The Turbulent Heat Flux (THX) experiments were conducted at NASA Glenn Research Center (GRC) in order to collect measurements of velocities and temperatures for computational fluid dynamics (CFD) validation of heated flows, with a focus on propulsion system components. The experiments spanned 5 phases; four of which were conducted in the GRC AeroAcoustic Propulsion Laboratory (AAPL) using the Small Hot Jet Flow Rig (SHJAR). In addition to making velocity measurements with Particle Image Velocimetry (PIV), the THX experiments introduced a new Raman-scattering based capability to measure temperatures. Computational studies were also conducted for each of the experimental configurations, in order to provide a baseline of expected CFD results and conduct an assessment of the capability of various CFD approaches for calculating flows where the turbulent transport of heat was important. Two of the collected sets of data were used for American Institute of Aeronautics and Astronautics (AIAA) Propulsion Aerodynamic Workshops (PAWs). The data set from the 5th phase, collected for heated supersonic jets, was also used to construct new validation cases for the NASA Turbulence Model Resource (TMR). This paper provides an overview of the experiments and associated computations for each of the 5 test phases. Key experimental findings are presented. Lessons learned are provided concerning the effect of computational modeling choice on accuracy of predicting turbulent flows where thermal transport is important. Emphasis is placed on comparing Reynolds- averaged Navier-Stokes approaches with large-eddy simulation approaches. The benefits of utilizing a conjugate heat transfer method in conjunction with CFD solver for film cooling is demonstrated.

RANS↗