Caged-Cation-Induced Lattice Distortion in Bronze TiO[subscript 2] for Cohering Nanoparticulate Hydr
Explore the source record for details and available documents.
Lin, Gaoxin↗
SEARCH · Search NASA
Results for “Lattice distortion”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Phase stability, electronic, mechanical, lattice distortion, and thermal properties of complex refractory-based high entropy alloys TiVCrZrNbMoHfTaW with varying elemental ratios
This study examines the intricate area of refractory-based high entropy alloys (RHEAs), focusing on a series of complex compositions involving nine diverse refractory elements: Ti, V, Cr, Zr, Nb, Mo, Hf, Ta, and W.
Chemistry↗
Impact of metal diffusion, lattice distortions, native defects, and ambient on dielectric breakdown in Ni–Ga 2 O 3 Schottky diodes
Ga 2 O 3 unipolar devices are of high interest due to their ~8 MV/cm predicted breakdown fields, which have not yet been achieved due to premature device failure. Pre- and post-failure defect analysis of Ni–Ga 2 O 3 Schottky diodes in ultrahigh vacuum (UHV) and air were performed using depth-resolved cathodoluminescence, high angle annular dark field scanning transmission electron microscopy, and energy dispersive x-ray analysis to understand the physical mechanisms that precede premature breakdown. The breakdown voltage in UHV was dramatically reduced by nearly 40% compared with the breakdown in air. This reduction in the breakdown voltage correlated with post-breakdown differences in Ni distribution, indicating that the coordination and bonding of Ni contribute strongly to electrical behavior in Ni–Ga 2 O 3 Schottky diodes. Breakdown studies in UHV revealed that Ni diffuses away more from the metal–semiconductor interface than with air breakdown, where Ni localizes more near the interface, indicative of the preferential formation of a Ni oxide under O-poor conditions. These measurements also identified the formation of divacancy-interstitial complexes and their characteristic luminescence signature ~150 nm from the interface, the densities of which correlated with breakdown fields. These findings show that electric-field-induced degradation occurs via the rearrangement of native point defects, which act as an additional precursor to device failure. Macroscopically, they show the impact of both vacuum conditions and metal reactivity on Ga 2 O 3 device fabrication.
36 MATERIALS SCIENCE↗
Local lattice distortions and dynamics in extremely overdoped superconducting YSr 2 Cu 2.75 Mo 0.25 O 7.54
A common characteristic of many “overdoped” cuprates prepared with high-pressure oxygen is T c values ≥ 50 K that often exceed that of optimally doped parent compounds, despite O stoichiometries that place the materials at the edge or outside of the conventional boundary between superconducting and normal Fermi liquid states. X-ray absorption fine-structure (XAFS) measurements at 52 K on samples of high-pressure oxygen (HPO) YSr 2 Cu 2.75 Mo 0.25 O 7.54 , T c = 84 K show that the Mo is in the (VI) valence in an unusually undistorted octahedral geometry with predominantly Mo neighbors that is consistent with its assigned substitution for Cu in the chain sites of the structure. Perturbations of the Cu environments are minimal, although the Cu X-ray absorption near-edge structure (XANES) differs from that in other cuprates. The primary deviation from the crystal structure is therefore nanophase separation into Mo- and Cu-enriched domains. There are, however, indications that the dynamical attributes of the structure are altered relative to YBa 2 Cu 3 O 7 , including a shift of the Cu-apical O two-site distribution from the chain to the plane Cu sites. Another effect that would influence T c is the possibility of multiple bands at the Fermi surface caused by the presence of the second phase and the lowering of the Fermi level.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Unraveling the Origin of Glassy Thermal Transport in Medium-Entropy Semiconductors: From Nanoscale Phase Segregation to Atomic-Scale Lattice Distortion
Thermoelectric (TE) materials can directly and reversibly convert heat into electricity, offering a promising pathway for reshaping the global energy landscape. The performance of thermoelectric materials is evaluated using the figure of merit, zT = S 2 σT/κ, which can be optimized by improving Seebeck coefficient (S) and electrical conductivity (σ) while suppressing the thermal conductivity (κ) at the operating temperature (T). Here, we introduce a medium-entropy metal chalcogenide that exhibits phonon-glass electron-crystal behavior. The conventional perspective hypothesizes that the suppression of thermal transport arises solely from disordered atomic occupation, which enhances alloy scattering mechanisms for phonon transport. However, emerging evidence suggests the presence of structural and chemical inhomogeneity at multiple length scales in entropy-engineered materials, a phenomenon that has rarely been investigated in detail.
Liu, Yukun [Northwestern Univ]↗
Engineering the spin transition and carrier type through high-entropy lattice distortions in rare-earth cobaltates
Explore the source record for details and available documents.
Fuller, Elliot James↗
Morphology, Deformations, and Photocatalytic Activity of Thermally Treated Brookite Titanium Dioxide Thin Films
Metastable states, in which the coupling between long-range lattice deformations and electronic properties can be controlled, provide a pathway to tailoring the behavior of photocatalytic materials by directing the flow of photoinduced charge carriers. Brookite is a metastable polymorph of earth-abundant TiO 2 that exhibits photocatalytic function and, due to its high energy relative to the anatase and rutile polymorphs, may serve as a precursor for the formation of transitional metastable structures. In this work, facile thermal annealing is employed to promote the formation of predominantly brookite-phase films, regulate the brookite lattice distortions, and determine the effect of these distortions on charge separation, ultimately directed at enhancing photocatalytic activity. Profile fitting of X-ray diffraction patterns and peak shifts in Raman spectra revealed structural distortions of the brookite lattice. Structural defects, including lattice gliding, dislocations, stacking faults, and twin boundaries, were observed using scanning transmission electron microscopy. First-principles simulations reveal how the lattice distortions associated with stacking faults induce band bending, thus increasing the photocatalytic activity of brookite. In conclusion, this study provides insight into the microstructural tuning of metastable phases to enhance their unique functionalities.
band bending↗
Three-dimensional atomic structure and local chemical order of medium- and high-entropy nanoalloys
Medium- and high-entropy alloys (M/HEAs) mix several principal elements with near-equiatomic composition and represent a model-shift strategy for designing previously unknown materials in metallurgy, catalysis and other fields. One of the core hypotheses of M/HEAs is lattice distortion, which has been investigated by different numerical and experimental techniques. However, determining the three-dimensional (3D) lattice distortion in M/HEAs remains a challenge. Moreover, the presumed random elemental mixing in M/HEAs has been questioned by X-ray and neutron studies, atomistic simulations, energy dispersive spectroscopy and electron diffraction, which suggest the existence of local chemical order in M/HEAs. However, direct experimental observation of the 3D local chemical order has been difficult because energy dispersive spectroscopy integrates the composition of atomic columns along the zone axes and diffuse electron reflections may originate from planar defects instead of local chemical order. Here, in this work, we determine the 3D atomic positions of M/HEA nanoparticles using atomic electron tomography and quantitatively characterize the local lattice distortion, strain tensor, twin boundaries, dislocation cores and chemical short-range order (CSRO). We find that the high-entropy alloys have larger local lattice distortion and more heterogeneous strain than the medium-entropy alloys and that strain is correlated to CSRO. We also observe CSRO-mediated twinning in the medium-entropy alloys, that is, twinning occurs in energetically unfavoured CSRO regions but not in energetically favoured CSRO ones, which represents, to our knowledge, the first experimental observation of correlating local chemical order with structural defects in any material. We expect that this work will not only expand our fundamental understanding of this important class of materials but also provide the foundation for tailoring M/HEA properties through engineering lattice distortion and local chemical order.
36 MATERIALS SCIENCE↗
Unraveling the dislocation–precipitate interactions in high-entropy alloys
The precipitates play a significant role in not only enhancing the strength, but also maintaining the high toughness in alloys. However, the interactions of the nanoscale precipitates with dislocations in the high entropy alloys (HEAs) are difficult to observe directly by in-situ TEM experiments due to the limits of the resolution and time. Here, using atomic simulations we report the synergistic strengthening of the coherent precipitate and atomic-scale lattice distortion in the HEAs at cryogenic/elevated temperatures. The effects of temperature, chemical disorder, precipitate spacing, precipitate size, elemental segregation, and dislocation-cutting number on the critical stress for the dislocation to overcome a row of precipitates are studied. A random stacking fault energy landscape along the slip plane, the lattice distortion at different temperatures, and the interface/surface energy at various crystallographic orientations are obtained. Compared with the traditional metals and alloys, HEAs have the severe atomic-scale lattice distortions to generate the local high tensile/compressive stress fields. This complex stress causes the dislocation line to bend, and thus improves the dislocation slip resistance, resulting in the strong solid-solution strengthening. The stacking fault strengthening induced by the obvious difference of the stacking fault energies between the HEA matrix and precipitate (within the inner of the HEA matrix), and the formation of the antiphase domain boundary contribute to the high strength. The precipitate embedded by the solute atoms produces the strong lattice distortion to enhance the dislocation slip resistance at high temperatures. Hence, the current results provide the mechanistic insight into the phenomenon that the coherent precipitate combined with the severe atomic-scale lattice distortion can enhance the strength at cryogenic/elevated temperatures to further broaden the scope of applications of advanced HEAs.
36 MATERIALS SCIENCE↗
Quantifying the role of the lattice in metal–insulator phase transitions
Many materials exhibit phase transitions at which both the electronic properties and the crystal structure change. Some authors have argued that the change in electronic order is primary, with the lattice distortion a relatively minor side-effect, and others have argued that the lattice distortions play an essential role in the energetics of the transition. In this paper, we introduce a formalism that resolves this long-standing problem. The methodology works with any electronic structure method that produces solutions of the equation of state determining the electronic order parameter as a function of lattice distortion. We use the formalism to settle the question of the physics of the metal–insulator transitions in the rare-earth perovskite nickelates (RNiO 3 ) and Ruddlesden–Popper calcium ruthenates (Ca 2 RuO 4 ) in bulk, heterostructure, and epitaxially strained thin film forms, finding that electron-lattice coupling is key to stabilizing the insulating state in both classes of materials.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Magnetic excitations from the hexagonal spin clusters in the 𝑆 = $\frac{1}{2}$ distorted honeycomb lattice antiferromagnet Cu 2 (pymca) 3 (ClO 4 )
Cu 2 (pymca) 3 (ClO 4 ) (pymca: pyrimidine-2-carboxylate) consists of a slightly distorted honeycomb lattice of Cu 2+ spins, which shows no long-range magnetic order down to 0.6 K. A magnetization study revealed 1/3 and 2/3 plateau phases [A. Okutani et al., J. Phys. Soc. Jpn. 88, 013703 (2019)], which is not expected for regular honeycomb antiferromagnets. Inelastic neutron scattering experiments were performed using a powder sample to investigate the exchange interactions of this material. The spin excitations from the singlet ground state to the first three triplet states, predicted from the antiferromagnetic hexagonal spin cluster interacting with 3.9 meV, were observed. Using the exact diagonalization methods, the intercluster coupling was estimated from the excitation peak width to be about 20% of the intracluster interaction, which is consistent with the previously reported value. Finally, our exchange path model explains the anisotropic exchange interactions in the distorted honeycomb plane.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Starting-point-independent quantum Monte Carlo calculations of iron oxide
Quantum Monte Carlo (QMC) methods are useful for studies of strongly correlated materials because they are many body in nature and use the physical Hamiltonian. Typical calculations assume as a starting point a wave function constructed from single-particle orbitals obtained from one-body methods, e.g., density functional theory. However, mean-field-derived wave functions can sometimes lead to systematic QMC biases if the mean-field result poorly describes the true ground state. In this study, we examine the accuracy and flexibility of QMC trial wave functions using variational and fixed-node diffusion QMC estimates of the total spin density and lattice distortion of antiferromagnetic iron oxide (FeO) in the ground state B1 crystal structure. We found that for relatively simple wave functions the predicted lattice distortion was controlled by the choice of single-particle orbitals used to construct the wave function, rather than by subsequent wave function optimization techniques within QMC. By optimizing the orbitals with QMC, we then demonstrate starting-point independence of the trial wave function with respect to the method by which the orbitals were constructed by demonstrating convergence of the energy, spin density, and predicted lattice distortion for two qualitatively different sets of orbitals. The results suggest that orbital optimization is a promising method for accurate many-body calculations of strongly correlated condensed phases.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Weakly coupled alternating S = 1 2 chains in the distorted honeycomb lattice compound Na 2 Cu 2 TeO 6
Spin- 1 2 chains with alternating antiferromagnetic (AF) and ferromagnetic (FM) couplings exhibit quantum entanglement as the integer-spin Haldane chains and might be similarly utilized for quantum computations. Such alternating AF-FM chains have been proposed to be realized in the distorted honeycomb lattice compound Na 2 Cu 2 TeO 6 , but to confirm this picture a comprehensive understanding of the exchange interactions including terms outside of the idealized model is required. Here, we employ neutron scattering to study the spin dynamics in Na 2 Cu 2 TeO 6 and accurately determine the coupling strengths through the random phase approximation and density functional theory approaches. We find the AF and FM intrachain couplings are the dominant terms in the spin Hamiltonian, while the interchain couplings are AF but perturbative. This hierarchy in the coupling strengths and the alternating signs of the intrachain couplings can be understood through their different exchange paths. Our results establish Na 2 Cu 2 TeO 6 as a weakly coupled alternating AF-FM chain compound and reveal the robustness of the gapped ground state in alternating chains under weak interchain couplings.
1-dimensional spin chains↗
Crystallization of polarons through charge and spin ordering transitions in 1T-TaS 2
The interaction of electrons with the lattice in metals can lead to reduction of their kinetic energy to the point where they may form heavy, dressed quasiparticles—polarons. Unfortunately, polaronic lattice distortions are difficult to distinguish from more conventional charge- and spin-ordering phenomena at low temperatures. Here we present a study of local symmetry breaking of the lattice structure on the picosecond timescale in the prototype layered dichalcogenide Mott insulator 1T-TaS 2 using X-ray pair-distribution function measurements. We clearly identify symmetry-breaking polaronic lattice distortions at temperatures well above the ordered phases, and record the evolution of broken symmetry states from 915 K to 15 K. The data imply that charge ordering is driven by polaron crystallization into a Wigner crystal-like state, rather than Fermi surface nesting or conventional electron-phonon coupling. At intermediate temperatures the local lattice distortions are found to be consistent with a quantum spin liquid state.
36 MATERIALS SCIENCE↗
Dual-stage structural response to quenching charge order in magnetite
The Verwey transition in magnetite (Fe 3 O 4 ) is the prototypical metal-insulator transition and has eluded a comprehensive explanation for decades. A major element of the challenge is the complex interplay between charge order and lattice distortions. Here we use ultrafast electron diffraction (UED) to disentangle the roles of charge order and lattice distortions by tracking the transient structural evolution after charge order is melted via ultrafast photoexcitation. A dual-stage response is observed in which X 3 , X 1 and Δ 5 type structural distortions occur on markedly different timescales of 0.7-3.2 ps and longer than 3.2 ps. We propose that these distinct timescales arise because X 3 -type distortions strongly couple to the trimeron charge order whereas the Δ 5 -distortions are more strongly associated with monoclinic to cubic distortions of the overall lattice. Our work aids in clarifying the charge-lattice interplay using UED method and illustrates the disentanglement of the complex phases in magnetite.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
A novel stress-induced martensitic transformation in a single-phase refractory high-entropy alloy
High-entropy alloys (HEAs) provide a new perspective to design metastable alloys with the stress-induced martensitic transformation (SIMT) for overcoming the strength-ductility trade-off. Here, we report a novel SIMT, orthorhombic to hexagonal close-packed martensite, in a single orthorhombic refractory HEA (Ti 16 Zr 35 Hf 35 Ta 14 RHEA), showing a good yield strength-ductility matching. The analysis of the elastic distortion energy (ΔE els ) of Ti 16 Zr 35 Hf 35 Ta 14 and several other RHEAs reveals that severe lattice distortion is a key factor which causes this SIMT. Combined the “d-electron alloy design” approach with the ΔE els , the phase configuration and SIMT path in RHEAs can be well predicted. Our work brings new insights between the lattice distortion and SIMT of RHEAs, benefiting the metastable alloy development.
36 MATERIALS SCIENCE↗
Adaptively coupled phase retrieval in multi-peak Bragg coherent diffraction imaging
Recent advances in Bragg coherent diffraction imaging (BCDI) experimental techniques permit routine measurement of multiple Bragg peaks from a single crystalline grain. The resulting images contain the full lattice distortion vector field which can be differentiated to provide lattice strain and rotation. With the advent of fourth-generation synchrotron light sources, such multi-peak datasets are produced at high rates, facilitating the need for rapid phase retrieval of the multiple peaks and subsequent image analysis. Here we describe and demonstrate a new implementation of a coupled phase retrieval technique for multi-peak BCDI which simultaneously treats each Bragg peak of the dataset and produces a three-dimensional image of the crystal's morphology and lattice distortion field. In addition, this method uses the redundant information contained in the various Bragg diffraction patterns to detect and suppress spurious signal appearing on the detector in a subset of the measurements. Compared with manual data editing, adaptive coupling produces a more consistent phase profile in reciprocal space and sharper surfaces in direct space, with no significant difference in computational cost. These improvements reduce the need for manual preprocessing and enable robust high-throughput analysis of multi-peak BCDI data, supporting near-real-time strain microscopy at modern synchrotron facilities.
36 MATERIALS SCIENCE↗