Search NASA⌕ Search

SEARCH · Search NASA

Results for “LiCoO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Metal fluoride passivation coatings prepared by atomic layer deposition for Li-ion batteries

The fabrication of robust interfaces between transition metal oxides and non-aqueous electrolytes is one of the great challenges of lithium ion batteries. Atomic layer deposition (ALD) of aluminum tungsten fluoride (AlWxFy) improves the electrochemical stability of LiCoO2. AlWxFy thin films were deposited by combining trimethylaluminum and tungsten hexafluoride. in-situ quartz crystal microbalance and transmission electron microscopy studies show that the films grow in a layer-by-layer fashion and are amorphous nature. Ultrathin AlWxFy coatings (<10 Å) on LiCoO2 significantly enhance stability relative to bare LiCoO2 when cycled to 4.4 V. The coated LiCoO2 exhibited superior rate capability (up to 400 mA/g) and discharge capacities at a current of 400 mA/g were 51% and 92% of the first cycle capacities for the bare and AlWxFy coated materials. These results open new possibilities for designing ultrathin and electrochemically robust coatings of metal fluorides via ALD to enhance the stability of Li-ion electrodes.

Mane, Anil U.↗

Materials Data on Li3Co3SbO8 by Materials Project

(LiCoO2)3SbO2 crystallizes in the triclinic P-1 space group. The structure is one-dimensional and consists of one antimony;dihydrate molecule and three LiCoO2 ribbons oriented in the (0, 1, 1) direction. In each LiCoO2 ribbon, Li1+ is bonded in a linear geometry to two equivalent O2- atoms. Both Li–O bond lengths are 1.59 Å. Co+2.67+ is bonded in a linear geometry to two equivalent O2- atoms. Both Co–O bond lengths are 1.46 Å. O2- is bonded in a distorted linear geometry to one Li1+ and one Co+2.67+ atom.

36 MATERIALS SCIENCE↗

Materials Data on Li5Co3O8 by Materials Project

(LiCoO2)2Li3CoO4 crystallizes in the triclinic P-1 space group. The structure is two-dimensional and consists of one Li3CoO4 ribbon oriented in the (-2, 1, 1) direction and one LiCoO2 sheet oriented in the (0, -1, 1) direction. In the Li3CoO4 ribbon, there are two inequivalent Li1+ sites. In the first Li1+ site, Li1+ is bonded in a distorted linear geometry to two O2- atoms. There is one shorter (1.59 Å) and one longer (1.61 Å) Li–O bond length. In the second Li1+ site, Li1+ is bonded in a distorted linear geometry to two equivalent O2- atoms. Both Li–O bond lengths are 1.67 Å. Co+3.67+ is bonded in a distorted linear geometry to two equivalent O2- atoms. Both Co–O bond lengths are 1.58 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a 2-coordinate geometry to two Li1+ atoms. In the second O2- site, O2- is bonded in a 2-coordinate geometry to one Li1+ and one Co+3.67+ atom. In the LiCoO2 sheet, there are two inequivalent Li1+ sites. In the first Li1+ site, Li1+ is bonded in a 2-coordinate geometry to four O2- atoms. There is two shorter (1.74 Å) and two longer (2.19 Å) Li–O bond length. In the second Li1+ site, Li1+ is bonded in a 2-coordinate geometry to four O2- atoms. There is two shorter (1.72 Å) and two longer (2.21 Å) Li–O bond length. Co+3.67+ is bonded in a distorted linear geometry to two O2- atoms. Both Co–O bond lengths are 1.49 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a 2-coordinate geometry to two Li1+ and one Co+3.67+ atom. In the second O2- site, O2- is bonded in a 2-coordinate geometry to two Li1+ and one Co+3.67+ atom.

36 MATERIALS SCIENCE↗

ALD of Al2O3 for Highly Improved Performance in Li-Ion Batteries

Significant advances in energy density, rate capability and safety will be required for the implementation of Li-ion batteries in next generation electric vehicles. We have demonstrated atomic layer deposition (ALD) as a promising method to enable superior cycling performance for a vast variety of battery electrodes. The electrodes range from already demonstrated commercial technologies (cycled under extreme conditions) to new materials that could eventually lead to batteries with higher energy densities. For example, an Al2O3 ALD coating with a thickness of ~ 8 A was able to stabilize the cycling of unexplored MoO3 nanoparticle anodes with a high volume expansion. The ALD coating enabled stable cycling at C/2 with a capacity of ~ 900 mAh/g. Furthermore, rate capability studies showed the ALD-coated electrode maintained a capacity of 600 mAh/g at 5C. For uncoated electrodes it was only possible to observe stable cycling at C/10. Also, we recently reported that a thin ALD Al2O3 coating with a thickness of ~5 A can enable natural graphite (NG) electrodes to exhibit remarkably durable cycling at 50 degrees C. The ALD-coated NG electrodes displayed a 98% capacity retention after 200 charge-discharge cycles. In contrast, bare NG showed a rapid decay. Additionally, Al2O3 ALD films with a thickness of 2 to 4 A have been shown to allow LiCoO2 to exhibit 89% capacity retention after 120 charge-discharge cycles performed up to 4.5 V vs Li/Li+. Bare LiCoO2 rapidly deteriorated in the first few cycles. The capacity fade is likely caused by oxidative decomposition of the electrolyte at higher potentials or perhaps cobalt dissolution. Interestingly, we have recently fabricated full cells of NG and LiCoO2 where we coated both electrodes, one or the other electrode as well as neither electrode. In creating these full cells, we observed some surprising results that lead us to obtain a greater understanding of the ALD coatings. We have also recently coated a binder free LiNi0.04Mn0.04Co02O2 electrode containing 5 wt% single-walled carbon nanotubes as the conductive additive and demonstrated both high rate capability as well as the ability to cycle the cathode to 5 V vrs. Li/Li+. Finally, we coated a Celgard (TM) separator and enabled stable cycling in a high dielectric electrolyte. These results will be presented in detail.

25 ENERGY STORAGE↗

Direct Visualization of Li Dendrite Effect on LiCoO 2 Cathode by In Situ TEM

Li dendrites are known to cause deterious, and in many cases catastrophic, effect on the performance of Li rechargeable batteries. However, the mechanistic failure mechanism of cathodes upon in contact with Li metal is far from clear. In this study, using in situ transmission electron microscopy, we directly visualize at an atomic scale the interaction of Li dendrites with well-defined, epitaxial thin films of LiCoO2, the most widely used cathode material. We show that a spontaneous and prompt chemical reaction is trigged once the Li contact is made, leading to expansion and amorphization of the LiCoO2 structure, with Li2O and Co metal being the final reaction products. A topotactic phase transition is identified close to the reaction front, resulting in the formation of CoO as a metastable intermediate. Dynamic structural and chemical imaging in combination with ab inito simulations reveal that a high density of antiphase grain boundaries are formed at the reaction front, which are critical for enabling the short-range topotactic reactions and long-range Li propagation. The fundamental insights are of general importance in mitigating Li dendrites related issues and guiding the design principle for more robust energy materials.

In situ transmission electron microscopy (TEM), Li↗

LiCoO 2 -Based Fiber Cathodes for Electrospun Full Cell Li-ion Batteries

Here, particle/polymer electrospinning was used to prepare fiber mat cathodes containing LiCoO 2 nanoparticles, carbon powder, and poly(vinylidene fluoride) for Li-ion batteries. The fibers had a high LiCoO 2 particle content (70 wt%) which allowed for a high gravimetric capacity of 90 mAh g -1 (corresponding to 128 mAh g$-1\atop{LiCoO2}$) at 0.1C (1C = 274 mAh g$-1\atop{LiCoO2}$). Cathode performance was stable in a half cell with 78% capacity retention over 200 cycles at 0.5C. Unlike previous work on electrospun LiCoO 2 nanofibers prepared using sol-gel chemistry and high temperature processing, the particle/polymer fiber mat cathodes reported here were made thick with a high fiber volume fraction for high areal and volumetric capacities at fast charge/discharge rates (e.g., 0.81 mAh cm -2 and 62 mAh cm -3 at 2C) which were much greater than that of a slurry cast cathode of the same composition (0.004 mAh cm -2 and 0.30 mAh cm -3 at 2C). Full cells containing a LiCoO 2 /C/PVDF fiber mat cathode and C/PVDF fiber mat anode were also prepared and characterized. These electrospun batteries exhibited a high energy density of 144 Wh kg -1 at 0.1C and an areal capacity of 1.03 mAh cm -2 at 1C. The excellent performance of the electrospun particle/polymer cathodes and anodes is attributed to electrolyte penetration throughout the 3D fiber electrode mats, a large electrode/electrolyte interfacial area, and short Li + transport pathways between the electrolyte and active material nanoparticles in the radial fiber direction.

30 DIRECT ENERGY CONVERSION↗

Electrochemical investigations of ionic liquids with vinylene carbonate for applications in rechargeable lithium ion batteries

Ionic liquids based on methylpropylpyrrolidinium (MPPY) and methylpropylpiperidinium (MPPI) cations and bis(trifluoromethanesulfionyl)imide (TFSI) anion have been synthesized and characterized by thermal analysis, cyclic voltammetry, impedance spectroscopy as well as gavanostatic charge/discharge tests. 10 wt% of vinylene carbonate (VC) was added to the electrolytes of 0.5 M LiTFSI/MPPY.TFSI and 0.5 M LiTFSI/MPPI.TFSI, which were evaluated in Li || natural graphite (NG) half cells at 25 oC and 50 oC under different current densities. At 25 oC, due to their intrinsic high viscosities, the charge/discharge capacities under the current density of 80 A cm-2 were much lower than those under the current density of 40 A cm-2. At 50 oC, with reduced viscosities, the charge/discharge capacities under both current densities were almost indistinguishable, which were also close to the typical values obtained using conventional carbonate electrolytes. In addition, the discharge capacities of the half cells were very stable with cycling, due to the effective formation of solid electrolyte interphase (SEI) on the graphite electrode. On the contrary, the charge/discharge capacities of the Li || LiCoO2 cells using both ionic liquid electrolytes under the current density of 40 A cm-2 decreased continually with cycling, which were primarily due to the low oxidative stability of VC on the surface of LiCoO2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oriented TiO2 nanotubes as a lithium metal storage medium

A new strategy for suppressing dendritic lithium growth in rechargeable lithium metal batteries is introduced, in which TiO2 nanotube (NT) array electrodes prepared by anodization are used as a metallic lithium storage medium. During the first charge process, lithium ions are inserted into the crystal structure of the TiO2 NT arrays, and then, lithium metal is deposited on the surfaces of the NT arrays, i.e., in the NT pores and between NT walls. From the second cycle onward, the TiO2 material is used as lithium ion pathways, which results in the effective current distribution for lithium deposition and prevents disintegration of the deposited metallic lithium. Compared to a Li(Cu foil)-LiCoO2 cell, the Li(TiO2 NT)-LiCoO2 cell exhibits enhanced cycling efficiency. This new concept will enable other 3D structured negative active materials to be used as lithium metal storage media for lithium metal batteries.

25 ENERGY STORAGE↗

Materials Data on Li3(CoO2)4 by Materials Project

Li2O2LiCoO2(CoO)2Lix0CoO2 crystallizes in the triclinic P1 space group. The structure is one-dimensional and consists of one cobalt dihydroxide molecule; one CoO ribbon oriented in the (0, 1, 1) direction; one Li2O2 ribbon oriented in the (0, 1, 1) direction; and one LiCoO2 ribbon oriented in the (0, 1, 1) direction. In the CoO ribbon, there are two inequivalent Co+3.25+ sites. In the first Co+3.25+ site, Co+3.25+ is bonded in a distorted linear geometry to two equivalent O2- atoms. Both Co–O bond lengths are 1.63 Å. In the second Co+3.25+ site, Co+3.25+ is bonded in a linear geometry to two equivalent O2- atoms. Both Co–O bond lengths are 1.34 Å. O2- is bonded in a 2-coordinate geometry to two Co+3.25+ atoms. In the Li2O2 ribbon, there are two inequivalent Li1+ sites. In the first Li1+ site, Li1+ is bonded in a distorted linear geometry to two O2- atoms. There is one shorter (1.63 Å) and one longer (1.64 Å) Li–O bond length. In the second Li1+ site, Li1+ is bonded in a linear geometry to two O2- atoms. There is one shorter (1.38 Å) and one longer (1.39 Å) Li–O bond length. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted bent 150 degrees geometry to two Li1+ atoms. In the second O2- site, O2- is bonded in a distorted bent 150 degrees geometry to two Li1+ atoms. In the LiCoO2 ribbon, Li1+ is bonded in a distorted linear geometry to two O2- atoms. There is one shorter (1.61 Å) and one longer (1.69 Å) Li–O bond length. Co+3.25+ is bonded in a distorted linear geometry to two O2- atoms. Both Co–O bond lengths are 1.30 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted linear geometry to one Li1+ and one Co+3.25+ atom. In the second O2- site, O2- is bonded in a distorted linear geometry to one Li1+ and one Co+3.25+ atom.

36 MATERIALS SCIENCE↗

Materials Data on Li3Mn2(CoO4)2 by Materials Project

(LiMnO2)2LiCoO2Lix0CoO2 crystallizes in the triclinic P-1 space group. The structure is one-dimensional and consists of one cobalt dihydroxide molecule; one LiCoO2 ribbon oriented in the (1, 1, 1) direction; and two LiMnO2 ribbons oriented in the (1, 1, 1) direction. In the LiCoO2 ribbon, Li1+ is bonded in a linear geometry to two equivalent O2- atoms. Both Li–O bond lengths are 1.53 Å. Co2+ is bonded in a linear geometry to two equivalent O2- atoms. Both Co–O bond lengths are 1.49 Å. O2- is bonded in a distorted bent 150 degrees geometry to one Li1+ and one Co2+ atom. In each LiMnO2 ribbon, Li1+ is bonded in a linear geometry to two equivalent O2- atoms. Both Li–O bond lengths are 1.44 Å. Mn+4.50+ is bonded in a distorted linear geometry to two equivalent O2- atoms. Both Mn–O bond lengths are 1.54 Å. O2- is bonded in a distorted linear geometry to one Li1+ and one Mn+4.50+ atom.

36 MATERIALS SCIENCE↗

Water-lubricated intercalation in V2O5·nH2O for high-capacity and high-rate aqueous rechargeable zinc batteries

Co-intercalation is an effective approach to tune the diffusion coefficient with which cations insert into the electrodes for energy storage devices. By applying this concept in aqueous Zn batteries, a prospective system for stationary energy storage, we demonstrate the critical role of structural H2O on Zn2+ intercalation into bilayer V2O5·nH2O. The H2O solvation of Zn2+ largely reduces its effective charge and thus electrostatic interaction with the V2O5 framework, evidently promoting the diffusion of solvated Zn2+. Benefited from the ‘lubricating’ effect, the aqueous Zn battery shows a specific energy of ~ 305 Wh kg-1 (based on cathode), comparable to those of LiCoO2//Graphite batteries. Meanwhile, it can maintain an energy density of 199 Wh kg-1 at a high power density of 24 kW kg-1 with a capacity retention of 88% after 900 cycles, making it a promising candidate for high-performance, low-cost, safe and environmentally friendly energy storage device.

Yan, Mengyu↗

In Situ Probing and Synthetic Control of Cationic Ordering in Ni-Rich Layered Oxide Cathodes

Ni-rich layered oxides (LiNi1-xMxO2; M = Co, Mn, ...) are appealing alternatives to conventional LiCoO2 as cathodes in Li-ion batteries for automobile and other large-scale applications due to their high theoretical capacity and low cost. However, preparing stoichiometric LiNi1-xMxO2 with ordered layer structure and high reversible capacity, has proven difficult due to cation mixing in octahedral sites. Herein, in situ studies of synthesis reactions and the associated structural ordering in preparing LiNiO2 and the Co-substituted variant, LiNi0.8Co0.2O2, are made, to gain insights into synthetic control of the structure and electrochemical properties of Ni-rich layered oxides. Results from this study indicate a direct transformation of the intermediate from the rock salt structure into hexagonal phase, and during the process, Co substitution facilities the nucleation of a Co-rich layered phase at low temperatures and subsequent growth and stabilization of solid solution Li(Ni, Co)O-2 upon further heat treatment. Optimal conditions are identified from the in situ studies and utilized to obtain stoichiometric LiNi0.8Co0.2O2 that exhibits high capacity (up to 200 mA h g(-1) ) with excellent retention. The findings shed light on designing high performance Ni-rich layered oxide cathodes through synthetic control of the structural ordering in the materials.

Zhao, Jianqing↗

Modeling the hydrodynamic and electrochemical efficiency of semi-solid flow batteries

A mathematical model of flow cell operation incorporating hydrodynamic and electrochemical effects in three dimensions is developed. The model and resulting simulations apply to recently demonstrated high energy-density semi-solid flow cells. In particular, state of charge gradients that develop during low flow rate operation and their effects on the spatial non-uniformity of current density within flow cells are quantified. A one-dimensional scaling model is also developed and compared to the full three-dimensional simulation. The models are used to demonstrate the impact of the choice of electrochemical couple on flow cell performance. For semi-solid flow electrodes, which can use solid active materials with a wide variety of voltage-capacity responses, we find that cell efficiency is maximized for electrochemical couples that have a relatively flat voltage vs. capacity curve, operated under slow flow conditions. For example, in flow electrodes limited by macroscopic charge transport, an LiFePO4-based system requires one-third the polarization to reach the same cycling rate as an LiCoO2-based system, all else being equal. Our conclusions are generally applicable to high energy density flow battery systems, in which flow rates can be comparatively low for a given required power. (C) 2012 Elsevier Ltd. All rights reserved.

Brunini, VE↗

High performance lithium-ion and lithium–sulfur batteries using prelithiated phosphorus/carbon composite anode

Controlled chemical prelithiation of high capacity phosphorous/carbon (P/C) composite anode has been applied to develop advanced lithium-ion batteries (LIBs). The initial coulombic efficiency (CE) of P/C is significantly improved (up to 93% for fully-prelithiated P/C) owing to the formation of an artificial solid electrolyte interface (SEI) layer, which is characterized by SEM, Raman and XPS analyses. It ensures the application of P/C anode in real battery assembly. A partly-prelithiated P/C anode prepared by 20 sec prelithiation treatment is paired with a LiCoO2 (LCO) cathode. Here, the full cell delivers a highly reversible capacity of ~ 104 mAh g -1 LCO at 1C rate and retains a CE close to 100% over 2000 cycles. Moreover, a fully-prelithiated P/C anode prepared by 10 min prelithiation treatment is paired with a high-capacity Lifree sulfur/carbon (S/C) cathode. This newly configured full cell delivers a good rate and cycling performance and a high energy density of 358 Wh kg -1 .

25 ENERGY STORAGE↗

Probing lattice defects in crystalline battery cathode using hard X-ray nanoprobe with data-driven modeling

Lattice defects, e.g., dislocations and grain boundaries, critically impact the properties of crystalline battery cathode materials. A longstanding challenge is to probe the meso–scale heterogeneity and evolution of lattice defects with sensitivity to atomic-scale details. Herein, we tackle this issue with a unique combination of X-ray nanoprobe diffractive imaging and advanced machine learning techniques. The domains with different lattice defect configuration within a single-crystalline LiCoO2 cathode particle are faithfully revealed using our approach. We further visualize the rearrangement of grain boundaries and local crystallinity upon mild thermal annealing. Furthermore, these results pave a direct way to the understanding of crystalline battery materials’ response under external stimuli with high fidelity, which provides valuable empirical guidance to defect-engineering strategies for improving the cathode materials against aggressive battery operation.

36 MATERIALS SCIENCE↗

Ionic Interdiffusion at Cathode|Solid-Electrolyte Interface: A Machine Learning–Assisted Multiscale Investigation and Mitigation Strategies

Future lithium batteries are expected to use solid electrolytes to achieve higher energy density and fast charge capabilities. However, most solid electrolytes are thermodynamically unstable against layered oxide cathodes. In this study, the stability of LiCoO2 (LCO) cathode with Li10GeP2S12 (LGPS) solid electrolyte is investigated using ab initio molecular dynamics (AIMD) and machine learning molecular dynamics (MLMD). The propensity of ionic interdiffusion, formation of a passivating interphase layer, and corresponding decay in cell performance is addressed using a continuum model. Large-scale MLMD simulations confirm that the LCO|LGPS interface permits interdiffusion of cobalt (Co) and other ionic species, leading to the formation and growth of a resistive interphase and to dramatic capacity fade even in the first cycle. We examine the literature evidence that incorporating a thin layer of LiNb0.5Ta0.5O3 (LNTO) between LCO and LGPS prevents the interdiffusion of ions. Atomistic simulations suggest that substituting lithium (Li) in LNTO with Co is thermodynamically unfavorable, thereby inhibiting ionic interdiffusion. The stable Nb5+/Ta5+ states form a rigid metal-oxide framework, which consequently also prevents the substitution of niobium (Nb) or tantalum (Ta). However, continuum-level analysis suggests that the higher mechanical stiffness of LNTO can lead to interfacial delamination between the LCO and LNTO. This phenomenon reduces the effectiveness of the protective layer. This paper, therefore, highlights the need to develop novel interlayers that balance low ionic interdiffusion with low mechanical stiffness.

Ncube, Musawenkosi K.↗

Electrochemical and impedance investigation of the effect of lithium malonate on the performance of natural graphite electrodes in lithium-ion batteries

Lithium malonate (LM) was coated on the surface of a natural graphite (NG) electrode, which was then tested as the negative electrode in the electrolytes of 0.9 M LiPF6/EC-PC-DMC (1/1/3, by weight) and 1.0 M LiBF4/EC-PC-DMC (1/1/3, by weight) under a current density of 0.075 mA cm-2. LM was also used as an additive to the electrolyte of 1.0 M LiPF6/EC-DMC-DEC (1/1/1, by volume) and tested on a bare graphite electrode. It was found that both the surface coating and the additive approach were effective in improving first charge discharge capacity and coulomb efficiency. Electrochemical impedance spectra showed that the decreased interfacial impedance was coupled with improved coulomb efficiency of the cells using coated graphite electrodes. Cyclic voltammograms (CVs) on fresh bare and coated natural graphite electrodes confirmed that all the improvement in the half-cell performance was due to the suppression of the solvent decomposition through the surface modification with LM. The CV data also showed that the carbonate electrolyte with LM as the additive was not stable against oxidation, which resulted in lower capacity of the full cell with commercial graphite and LiCoO2 electrodes.

additive↗