Search NASA⌕ Search

SEARCH · Search NASA

Results for “Light Weight”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Long coir and glass fiber reinforced polypropylene hybrid composites prepared via wet-laid technique

Natural fiber composites offer an advantage in terms of weight saving for many automotive applications; however, many natural fiber composites lack properties to justify substitution for synthetic composites. Hybridizing the natural fiber composites by adding a fraction of synthetic fibers is an innovative approach to provide a balance between composite's performance and weight savings. In this study, coir fiber (40 wt%)-reinforced polypropylene (PP) composites were hybridized by substituting a fraction of coir fiber with glass fiber (0–30 wt%). The composites were prepared using a novel wet-laid technique followed by compression molding, where the fiber length is preserved. The composites prepared by hybridizing PP/coir fibers with glass fibers were light in weight (6–20% lighter compared to 40 wt% glass fiber reinforced PP) with significantly enhanced tensile (strength – 49–182%, modulus – 54–130%), flexural (strength – 41–104%, modulus – 64–193%), and impact properties (157 - 474%) compared to 40 wt% coir fiber reinforced PP composites. Furthermore, the addition of glass fiber (10–30 wt%) to coir fiber reduced the water-absorbing tendency (by 18–74%) of PP/coir fiber composites. All in all, this work has potential applications in automotive, mass transit, and truck applications where natural fiber composites are being investigated as alternatives to metal and/or fully synthetic composites.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Diamond and SiC Detectors for Rare Event Searches

In recent years, there has been increasing interest in developing detectors which are sensitive to sub-GeV dark matter and low-energy events from coherent neutrino scattering. Due to carbon’s light atomic weight and its tendency to form crystals with high-energy, long-lived phonon modes, carbon-based crystals (including diamond and silicon carbide (SiC)) present themselves as natural target materials for scattering-based searches in this regime. Here, we present our preliminary results in adapting our TES-based detectors to these substrates, specifically 4-H SiC and polycrystalline diamond. We focus on our fabrication efforts, specifically tuning the transition temperature (T C ) of tungsten films sputtered on these materials, as well as our advancement toward fabricating and testing devices on these substrates.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Advancing Molecular Weight Determination of Lignin by Multi-Angle Light Scattering

Due to the complexity and recalcitrance of lignin, its chemical characterization is a key factor preventing the valorization of this abundant material. Multi-angle light scattering (MALS) is becoming a sought-after technique for absolute molecular weight (MW) determination of polymers and proteins. Lignin is a suitable candidate for MW determination via MALS, yet further investigation is required to confirm its absolute MW values and molecular size. Studies aiming to break down lignin into a variety of renewable products will benefit greatly from a simple and reliable determination method like MALS. Recent pioneering studies, discussed in this review, addressed several key challenges in lignin’s MW characterization. Nevertheless, some lignin-specific issues still need to be considered for in-depth characterization. This study explores how MALS instrumentation manages the complexities of determining lignin’s MW, e.g., with simultaneous fractionation and fluorescence interference mitigation. Additionally, we rationalize the importance of a more detailed light scattering analysis for lignin characterization, including aspects like the second virial coefficient and radius of gyration.

differential refractive index increment↗
DOE OSTI2024

Development and Experimental Optimization of High-Temperature Modeling Tools and Methods for Concentrated Solar Power Particle - Systems

A novel, open-source radiative modeling toolset was developed to extend the functionality of particle-based modeling software (e.g. discrete element method (DEM)) to environmental conditions relevant to concentrated solar power applications. This toolset was optimized for deployment on desktop workstations instead of high-performance computing systems, to render such tools more accessible to the research community. Both particle-based modeling and radiative exchange modeling are computationally expensive and often require specialized programming expertise, making these methods cumbersome to use. Recent developments in DEM software by DCS Computing have greatly reduced these challenges, providing a graphical-user-interface based platform and modeling optimization for desktop workstations, HPCs, and cloud computing. The University of Dayton leveraged the experience of DCS Computing in developing a user-friendly, open-source radiative heat transfer expansion for DEM modeling. The University of Dayton DEM+ radiative modeling toolset was developed using a combination of fundamental experimental measurements, modeling, and simplified flow experiments over a range of temperatures and flow conditions. The toolset provides researchers with access to multiple radiative models including an accelerated Monte-Carlo Ray Tracing (application agnostic, highly computationally expensive), an expanded database of distance-based approximations (application limited, computationally light), and a weighted blending of the two methods capable of achieving over 90% reduction in computation time with equivalent accuracy compared to Monte-Carlo Ray Tracing. Through a graphical user interface, users can customize the radiative models to match their desired accuracy and available computational resources, improving access to particle based modeling for the research community. Ceramic sintered bauxite proppants were used in modeling and experimentally as a baseline. Both the radiative heat transfer and flow properties for particulate systems were investigated at elevated temperatures up to 800 °C. The major accomplishments for this work include a verified, open-source radiative modeling toolset to be distributed amongst the research community and the fabrication of three small-scale test facilities to investigate particle behavior and tune DEM flow properties for operation up to 800 °C. The findings have been shared with the research community via conference modeling workshops, deployment of the tools in DCS Computing Aspherix®, and open-source access to the developed radiative modeling tool. The development of next-generation CSP facilities and thermal energy storage systems based on ceramic particles requires providing access to computationally efficient and accurate modeling tools. Particles will experience a wide range of environments (20-800 °C) and handling conditions (dilute curtains or dense packing), requiring specially designed and optimized equipment. Optimizing solid particle physics models and establishing best-practices for particle modeling in CSP environments will assist researchers with designing optimized equipment, accelerating the deployment of more economically-competitive CSP facilities.

14 SOLAR ENERGY↗
DOE OSTI2024

Tracing back the birth environments of Type Ia supernova progenitor stars: a pilot study based on 44 early-type host galaxies

The environmental dependence of Type Ia supernova (SN Ia) luminosities is well established, and efforts are being made to find its origin. Previous studies typically use the currently observed status of the host galaxy. However, given the delay time between the birth of the progenitor star and the SN Ia explosion, the currently observed status may differ from the birth environment of the SN Ia progenitor star. In this paper, employing the chemical evolution and accurately determined stellar population properties of 44 early-type host galaxies, we, for the first time, estimate the SN Ia progenitor star birth environment, specifically [Fe/H] Birth and [α/Fe] Birth . We show that [α/Fe] Birth has a $30.4^{\text{+10.6}}_{-10.1}{{\ \rm per\ cent}}$ wider range than the currently observed [α/Fe] Current , while the range of [Fe/H] Birth is not statistically different ($17.9^{\text{+26.0}}_{-27.1}{{\ \rm per\ cent}}$) to that of [Fe/H] Current . The birth and current environments of [Fe/H] and [α/Fe] are sampled from different populations (p-values of the Kolmogorov–Smirnov test <0.01). We find that light-curve fit parameters are insensitive to [Fe/H] Birth (<0.9σ for the non-zero slope), while a linear trend is observed with Hubble residuals (HRs) at the 2.4σ significance level. With [α/Fe] Birth , no linear trends (<1.1σ) are observed. Interestingly, we find that [α/Fe] Birth clearly splits the SN Ia sample into two groups: SN Ia exploded in [α/Fe] Birth -rich or [α/Fe ]Birth -poor environments. SNe Ia exploded in different [α/Fe] Birth groups have different weighted-means of light-curve shape parameters: 0.81 ± 0.33 (2.5σ). They are thought to be drawn from different populations (p-value = 0.01). Regarding SN Ia colour and HRs, there is no difference (<1.0σ) in the weighted-means and distribution (p-value > 0.27) of each [α/Fe] Birth group.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Materials (FR 2023 Annual Progress Report)

This document summarizes the progress of VTO Materials R&D projects supported during the fiscal year 2023. The Propulsion Materials portfolio is closely aligned with other VTO subprograms to identify critical materials needs for next-generation high-efficiency powertrains for both heavy- and light-duty vehicles. The Lightweight Materials portfolio works closely with industry through the U.S. DRIVE Partnership to understand light-duty vehicle structural weight-reduction goals and identify technical challenges that prevent the deployment of lightweight materials.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Solventless Dual‐Cure Liquid Resins Via Circular Use of Phthalic Anhydride for Recyclable Composite Applications

Abstract Fiber‐reinforced composites (FRCs) possess a remarkable strength‐to‐weight ratio, making them ideal light‐weighing alternative materials of metals used in automotive, aerospace, and outdoor equipment applications, but their recycling is challenging. Chemically recyclable thermoset polymers can enable fiber recovery and reuse; however, challenges remain in the separation and purification of depolymerized small molecules for efficient polymer recycling. To this end, a series of liquid resins for chemically recyclable polymer networks is designed based on phthalic anhydride, a widely produced and inexpensive chemical. The straightforward sublimation of phthalic anhydride is leveraged to enable a simple and efficient separation process for polymer recycling. To liquefy phthalic anhydride, five mono‐acryloyl‐phthalates are synthesized to obtain stable liquid resins together with phthalic diglycidyl ester. These liquid resins undergo dual‐cure reactions that comprise photopolymerization of acrylate and, subsequently, heat‐mediated epoxy‐acid polymerization reactions. These liquid resins exhibit moderate viscosities (2600–6400 cP @ 22 °C), fast curing, and robust thermomechanical properties (T g s from 71 to 116 °C). It is demonstrated that hydrolysis of the dual‐cured polymers completes within 2 h at 80 °C, and direct sublimation produces phthalic anhydride with 82% yield. This resin system is expected to provide a cost‐competitive, highly efficient platform for recyclable FRCs.

Polymer Science↗
DOE OSTI2025

Graphene Oxide Nanoribbons for High Early-Strength Cement Concrete

Longitudinal oxidative unzipping of the outer walls of multiwalled carbon nanotubes (MWCNTs) yields graphene oxide nanoribbons (GONRs), which exhibit greater open surface area and functional edge content than MWCNTs. This paper presents a study of the nano-amendment of Portland cement concrete with GONRs in concentrations between 0.05% (in weight of cement, wt%) and 0.0005 wt%, thus up to two orders of magnitude lower than that reported as lower-bound in the archival literature. The dispersibility in aqueous solution as a function of GONR concentration and oxygen weight content (O%) was assessed through dynamic light scattering (DLS) and zeta potential analysis. The results indicated that less effective suspensions were obtained for 0.05 wt% of GONRs and 22.7 O%. Therefore, GONR water suspensions with 30-40% O% were used to manufacture 50 mm × 100 mm cylindrical concrete specimens. After 7 days of curing, results from uniaxial compression tests using four specimens per configuration (MWCNT concentration and O%) showed that the incorporation of GONRs resulted in an average increase in compressive strength up to 45%. Consistent with the DLS and compression test results, SEM micrographs showed well-dispersed GONRs together with accelerated and preferential formation of calcium silicate hydrates (C-S-H) for all GONR concentrations. The results indicate, for the first time, that the incorporation of very small concentrations (as low as 0.0005 wt%) of well-dispersed GONR amendments can significantly enhance the early-age concrete strength. However, such enhancement became insignificant after 28 days of curing.

cement↗
DOE OSTI2024

Next Gen High Efficiency Boosted Engine Development

This work represents an advanced engineering research project partially funded by the U.S. Department of Energy (DOE). Ford Motor Company, FEV North America, and Oak Ridge National Laboratory collaborated to develop a next generation boosted spark ignited engine concept. The project goals, specified by the DOE, were 23% improved fuel economy and 15% reduced weight relative to a 2015 or newer light-duty vehicle. The fuel economy goal was achieved by designing an engine incorporating high geometric compression ratio, high dilution tolerance, low pumping work, and low friction. The increased tendency for knock with high compression ratio was addressed using early intake valve closing (EIVC), cooled exhaust gas recirculation (EGR), an active pre-chamber ignition system, and careful management of the fresh charge temperature. Engine weight reduction measures were implemented throughout the engine system making use of composite materials, advanced manufacturing techniques, and architectural choices. This report outlines the analytical, design, fabrication, and test work conducted for the duration of the project. The combustion system stability, EGR tolerance, and knock resistance were validated on a single cylinder engine. An inline six-cylinder engine was then designed targeting application in the Ford F150. Multi-cylinder engines were produced and tested achieving the target vehicle fuel economy improvement of 23% assessed using measured engine fuel consumption combined with a vehicle drive cycle simulation. Actions were identified and designs were demonstrated to achieve the 15% weight reduction target. This project included items covering a range of technology readiness levels. Some of the technologies explored are production ready, while others were investigated to understand the limitations for what can be achieved in a stoichiometric, gasoline-fueled, spark-ignited internal combustion engine.

42 ENGINEERING↗
DOE OSTI2025

A Novel Deployable Telescope Baffle Using the Kresling Origami Fold

This report introduces a novel deployable origami baffle designed for telescopes and optical systems, which reduces stray light while maintaining high compactness ratios and low weight. This design leverages the planar nature of the end caps on a cylindrical Kresling origami fold to incorporate mounting points, deployable options, and baffle vanes. The adaptable nature of origami (number of faces, origami geometrical ratios, scaling, etc.) allows the design to easily conform to system requirements, including field of view, deployed length, stowed/deployed stability points, and available volume. Geometric ratios that exhibit bistability in both the stowed and deployed states are discussed in detail, as this results in a rigid structure that maintains its desired configuration. Several designs were conceptualized, and multiple small-scale prototypes were constructed. Potential applications include camera lens hoods, lightweight astronomy telescopes, and deployable baffles for space telescopes and optical systems.

42 ENGINEERING↗
DOE OSTI2024

Origin of light-induced metastability in ZrTe 5

Here we study the nonequilibrium electronic structure of a model Dirac semimetal ZrTe 5 by using time-and-angle resolved photoemission spectroscopy and density functional theory–based electron and phonon calculations. By measuring the electronic dispersion near the Γ point at time delays up to 10 picoseconds, we discovered that the band spectral weight does not recover during the measured temporal window, revealing the existence of a light-induced metastable state in the electronic structure of this material. Our calculations find that the photoexcited A 1⁢g phonon mode leads to a band renormalization that both supports our experimental observations at the zone center and predicts changes to the band structure outside of our experimental window, ultimately showing the evolution from a direct to an indirect gap semimetal; such band renormalization dramatically reduces the electron-hole recombination rate giving rise to the metastability in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Process Intensification by One-Step, Plasma-Assisted Catalytic Synthesis of Liquid Chemicals from Light Hydrocarbons

In this project, we present a plasma-assisted, catalytic process that can handle variations in production rates and gas compositions of producing wells and reliably converts the hydrocarbons to gas phase olefins, high molecular weight alkanes, and liquid chemicals. The low-temperature plasma serves as a reactive chemical environment that activates and converts the light hydrocarbons to these valuable products. We present results from the integration of a catalyst into the low-temperature plasma zone to improve reaction efficiency and product selectivity. We show that the gas composition, bulk gas temperature, and input power of the plasma, with and without catalysts, influence the production rates of liquids from natural gas feeds.

03 NATURAL GAS↗
DOE OSTI2026

Improvements to Stripping Foils in BTA

To achieve the desired charge state in the Alternating Gradient Synchrotron (AGS), there is a stripping foil in the Booster to AGS (BtA) transfer line. For light ions, such as p, d, and h, they are already fully stripped in the Booster, or ions such as O have few electrons to be stripped off, and a thin foil of aluminum is used. For medium weight ions, such as Zr and Ru, they use what foils are available which have been optimized for heavy and light ions at 100 MeV/u. This worked well in the Zr case which achieved a measured stripping efficiency of 87%, contrary to the Ru case which achieved a measured stripping efficiency of 63%. For the EIC early science, Ag is currently intended to be the first ion. Using our existing foils, this would, at best, yield a helium-like charge state with a theoretical stripping efficiency of 50%. To improve on this, two foils of Ti or Nb have been selected to provide optimal stripping efficiency of Ag, and other energetic medium ions, which can reach 90% efficiency to fully strip the Ag ions. For heavy ions, the Al+C or Al+Ni stripping foils (sandwich foils) are used to produce helium-like charge states. For high intensity operation of Au, the Al foil nears its melting point and, in some cases, has been severely damaged. To maximize foil lifetime, there is a maximum intensity per unit time in BTA dependent on the Booster and AGS timing configurations. To mitigate the risk of melting the Al, replacement foils that use Ti, Nb, or anodized Al have been evaluated for their improved thermal qualities. At the selected thicknesses, each foil has equivalent charge distributions before entering the C foil, and should provide the same stripping efficiency through the entire sandwich.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Optimizing Optical Searches for Supermassive Black Hole Binaries in Active Galactic Nuclei Light Curves: Fourier versus Bayesian Periodicity Detection

Simulations predict that supermassive black hole binaries (SMBHBs) will exhibit periodic brightness variations that may exceed the stochastic variability intrinsic to active galactic nuclei (AGN). In this paper, we simulate SMBHBs with damped random walk (DRW) AGN variability and an added sinusoidal signal from the orbital motion, and test three methods—a generalized Lomb–Scargle periodogram (GLSP), a nested Bayesian sampler (NBS), and a weighted wavelet z-transform (or WWZ)—to determine which is best at recovering the periodicity. Our simulated light curves follow the properties of the Catalina Real-Time Transient Survey (or CRTS), Legacy Survey of Space and Time (LSST), and Zwicky Transient Facility (ZTF) to best inform current and future SMBHB searches. We map a broad range of parameter space and identify which DRW-only light curves best mimic periodicity and pass each method’s model selection. The NBS performs best at detecting periodicity and filtering out DRW-only light curves. Combined candidate selection with both the NBS and GLSP significantly reduces false-positive rates (FPRs) with marginal impact on true-positive rates (TPRs). With this joint model selection pipeline, we find the lowest FPRs in ZTF-like simulations and the highest detection rates in LSST-like simulations. Using a modified computation of the false-alarm probability with GLSP, we efficiently triage LSST AGN light curves (∼10 7 light curves in ∼10–30 hr) and achieve TPRs and FPRs of ∼40% and ∼0.5%, respectively.

Banaszak, Sebastian M. [Vanderbilt Univ., Nashvill↗
DOE OSTI2024

Celestial leaf amplitudes

Celestial amplitudes may be decomposed as weighted integrals of AdS 3 -Witten diagrams associated to each leaf of a hyperbolic foliation of spacetime. We show, for the Kleinian three-point MHV amplitude, that each leaf subamplitude is smooth except for the expected light-cone singularities. Moreover, we find that the full translationally-invariant celestial amplitude is simply the residue of the pole in the leaf amplitude at the point where the total conformal weights of the gluons equals three. This full celestial amplitude vanishes up to light-cone contact terms, as required by spacetime translation invariance, and reduces to the expression previously derived by Mellin transformation of the Parke-Taylor formula.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

DNA Strand Displacement Driven Molecular Additive Manufacturing (DSD-MAM)

The goal of this project was to validate two-dimensional molecular printers, initially selfassembled from DNA and then actuated by externally driven cycles of DNA strand displacement, as prototype integrated nanosystems for molecular additive manufacturing. Novel functionalities of these nanomachines were explored during this project, including the following: nanometer-precision positioning mechanisms based on DNA strand displacement with multivalent interactions for discrete stepping or else diffusive capture; integration of independently moving layers of DNA origami to achieve 2D controllable motion; integration of spatial positioning with deposition functionality. The principal importance of this project was to provide an essential step in the development of a new technology for atomically precise manufacturing. Our first generation molecular 2D printer offers several advantages over conventional DNA-origami patterning, such as faster prototyping, faster dynamic rearrangement of patterns, and the ability to respond with feedback. We anticipate that our first-generation molecular printers may inspire future generations of molecular printers with iterative improvements in robustness and throughput. Potential applications of atomically precise manufacturing include the following: photovoltaics; photosynthetic and fuel cells; thermoelectrics and anisotropic heat spreaders; solid-state lighting; molecular electronic and plasmonic circuits; selectively preamble membranes; self-repairing materials with high strength-to-weight and fracture resistance.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Development of in-situ polymerized intrinsically conductive resin and low-cost carbon pigments offering high conductivity for sensing, EMI shielding and lighting protection

Electrically conductive composites are emerging across diverse industries such as electronic, automotive, aerospace, advanced air mobility, biomedical, infrastructure, defense and security offering static charge dissipation, electromagnetic interference shielding, lighting protection, sensing, dicing, corrosion monitoring, etc. Conductivity enhanced composites provide several advantages compared to conventional metals including weight reduction, corrosion resistance, energy efficient processability, tunable properties and multifunctionality. Polymers are typically insulating in nature and require conducting filler for electron transport. However, dispersion and polymer-filler interphases are critical and often disrupt conducting pathways. Besides, conductive fillers such as graphene, carbon nanotube, MXene, silver nanowire, etc. are expensive, limiting their wide adoption in composite industry. On the other hand, a limited number of intrinsically conductive polymers are available among which polyaniline (PANI) has been widely studied due to its high conductivity, thermal and chemical stability. However, PANI is difficult to process and exhibits weak mechanical properties. In brief, there is a significant demand for electrically conductive polymer formulation with cost-effective conducting fillers that offer processability in scale to expand the market of conductivity enhanced materials.

Kumar, Vipin [Oak Ridge National Laboratory (ORNL)↗
DOE OSTI2026

Ab Initio Polariton Transport Dynamics with the Classical Path Approximation

We present an ab initio framework for simulating polariton transport dynamics based on the classical path approximation (CPA). The quantum dynamics of polariton transport involves simulating many electronic degrees of freedom, making a fully ab initio dynamics simulation computationally expensive. We demonstrate that the CPA, which removes the need for excited-state nuclear gradients, is well-suited for polaritonic systems because collective light–matter coupling leads to vanishing excited-state forces. Benchmark comparisons between CPA and full evaluation of the excited-state forces show excellent agreement for polariton transport results in model light–matter systems such as polariton group velocities and mean-squared displacements. Ab initio simulations of polariton transport using CPA reproduce key physical trends that are observed in experiments with BODIPY molecules. Our work establishes the CPA as a highly efficient tool for ab initio investigations of transport and energy flow in hybrid light–matter systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗