Search NASA⌕ Search

SEARCH · Search NASA

Results for “Loblolly pine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Increased leaf area index and efficiency drive enhanced production under elevated atmospheric [ CO 2 ] in a pine‐dominated stand showing no progressive nitrogen limitation

Abstract Enhancement of net primary production (NPP) in forests as atmospheric [CO 2 ] increases is likely limited by the availability of other growth resources. The Duke Free Air CO 2 Enrichment (FACE) experiment was located on a moderate‐fertility site in the southeastern US, in a loblolly pine ( Pinus taeda L.) plantation with broadleaved species growing mostly in mid‐canopy and understory. Duke FACE ran from 1994 to 2010 and combined elevated [CO 2 ] (eCO 2 ) with nitrogen (N) additions. We assessed the spatial and temporal variation of NPP response using a dataset that includes previously unpublished data from 6 years of the replicated CO 2 × N experiment and extends to 2 years beyond the termination of enrichment. Averaged over time (1997–2010), NPP of pine and broadleaved species were 38% and 52% higher under eCO 2 compared to ambient conditions. Furthermore, there was no evidence of a decline in enhancement over time in any plot regardless of its native site quality. The relation between spatial variation in the response and native site quality was suggested but inconclusive. Nitrogen amendments under eCO 2 , in turn, resulted in an additional 11% increase in pine NPP. For pine, the eCO 2 ‐induced increase in NPP was similar above‐ and belowground and was driven by both increased leaf area index ( L ) and production efficiency (PE = NPP/ L ). For broadleaved species, coarse‐root biomass production was more than 200% higher under eCO 2 and accounted for the entire production response, driven by increased PE. Notably, the fraction of annual NPP retained in total living biomass was higher under eCO 2 , reflecting a slight shift in allocation fraction to woody mass and a lower mortality rate. Our findings also imply that tree growth may not have been only N‐limited, but perhaps constrained by the availability of other nutrients. The observed sustained NPP enhancement, even without N‐additions, demonstrates no progressive N limitation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

The response of coarse root biomass to long-term CO 2 enrichment and nitrogen application in a maturing Pinus taeda stand with a large broadleaved component

Elevated atmospheric CO 2 (eCO 2 ) typically increases aboveground growth in both growth chamber and free-air carbon enrichment (FACE) studies. We report on the impacts of eCO 2 and nitrogen amendment on coarse root biomass and net primary productivity (NPP) at the Duke FACE study, where half of the eight plots in a 30-year-old loblolly pine (Pinus taeda, L.) plantation, including competing naturally regenerated broadleaved species, were subjected to eCO 2 (ambient, aCO 2 plus 200 ppm) for 15–17 years, combined with annual nitrogen amendments (11.2 g N m -2 ) for 6 years. Allometric equations were developed following harvest to estimate coarse root (>2 mm diameter) biomass. Pine root biomass under eCO 2 increased 32%, 1.80 kg m -2 above the 5.66 kg m -2 observed in aCO 2 , largely accumulating in the top 30 cm of soil. In contrast, eCO2 increased broadleaved root biomass more than twofold (aCO 2 : 0.81, eCO 2 : 2.07 kg m -2 ), primarily accumulating in the 30–60 cm soil depth. Combined, pine and broadleaved root biomass increased 3.08 kg m -2 over aCO 2 of 6.46 kg m -2 , a 48% increase. Elevated CO 2 did not increase pine root:shoot ratio (average 0.24) but increased the ratio from 0.57 to 1.12 in broadleaved species. Averaged over the study (1997–2010), eCO 2 increased pine, broadleaved and total coarse root NPP by 49%, 373% and 86% respectively. Nitrogen amendment had smaller effects on any component, singly or interacting with eCO 2 . A sustained increase in root NPP under eCO 2 over the study period indicates that soil nutrients were sufficient to maintain root growth response to eCO 2 . These responses must be considered in computing coarse root carbon sequestration of the extensive southern pine and similar forests, and in modelling the responses of coarse root biomass of pine–broadleaved forests to CO 2 concentration over a range of soil N availability.

9 allometry↗
DOE OSTI2025

Synergistic torrefaction of plastic polymers and biomass

This study explores the synergistic torrefaction of biomass and plastics, aimed at enhancing bioenergy production and promoting a circular economy. By leveraging the unique properties of both materials, we investigated the thermochemical transformations occurring during the torrefaction process, from material preparation to the final characteristics of the torrefied product. The biomass used included corn stover (CS) and loblolly pine (LP), while various plastics were categorized from #1 to #7. Torrefaction was conducted at temperatures of 200, 225, and 250 °C, with subsequent extrusion of the torrefied materials and raw materials to produce composite filaments. The results show a consistent decrease in mass yield with increased torrefaction temperature, with notable variations among different biomass-plastic combinations. Co-torrefaction of biomass with polyvinyl chloride and polypropylene resulted in accelerated reaction kinetics, with an observed mass loss rate increase of 15 % at 250 °C compared to the expected rates for individual components. This synergy was quantified, indicating a 20.3 % increase in mass loss for the loblolly pine-polypropylene combination and 23.9 % for corn stover-polypropylene. In contrast, other plastics, including polyethylene terephthalate, high-density polyethylene, low-density polyethylene, polystyrene, and polycarbonate, did not exhibit significant synergistic effects. Mechanical testing indicated that the torrefaction process alters the strength and brittleness of the resulting materials, with implications for their application in bioenergy production and bio-renewable materials. Overall, this research highlights the potential of synergistic torrefaction as a viable strategy for co-processing biomass and plastics, paving the way for innovative solutions in waste management and renewable energy resource development.

09 - BIOMASS FUELS↗
DOE OSTI2021

A nonlinear elasto-plastic bond model for the discrete element modeling of woody biomass particles

This work presents an experiment-informed, semi-empirical, elasto-plastic bond model for the discrete element modeling of woody biomass particles. The model renders nonlinear plastic deformation of materials when subjected to compression/tension, bending, and twisting, essential for accurately simulating the behavior of biomass in comminution. The model is implemented in an open-source DEM package LIGGGHTS and is assessed in a number of verification tests. The model is applied to simulate the fracturing test of notched loblolly pine blocks. Reduced bond strength is prescribed to the weak planes along the growth rings. It is found that the square-root formulation for describing the elasto-plastic normal bond contact delivers the best agreement with the experimental data over its linear and quadratic counterparts. Furthermore, the model predicts a strong anisotropic behavior of wood blocks with regard to the grain orientations, indicating that the cutting angle should be an important attribute for the optimization of biomass comminution.

42 ENGINEERING↗
DOE OSTI2023

Duke Forest FACE (FACTS-I): Plant and Soil Response Data

This dataset describing the responses of plant and soil pools and fluxes to elevated atmospheric CO2 concentration and increased nitrogen supply was collected from Duke Forest Free Air CO2 Enrichment (FACE) – Forest-Atmosphere Carbon Transfer and Storage (FACTS-I) experiment from 1996 to 2012. The dataset includes data files for allometry (diameter at breast height, tree height, and height to live crown base), leaf area index, biomass (stem, branch, foliage, and root biomass, tree density, and basal area), net primary productivity (stem, branch, foliage, reproductive, and coarse root NPP), sap flux density, soil CO2 efflux, and stem temperature. Data files were formatted as .csv (Microsoft Excel or other spreadsheet programs can be used to read the format) and file descriptions, including variable name, unit, and data range, can be found in ‘FileDescription_[data_name].txt’ files. The Duke FACE experiment was in a loblolly pine (Pinus taeda L.) plantation established in 1983. Naturally regenerated broadleaved species including sweetgum (Liquidambar styraciflua L.) and tulip poplar (Liriodendron tulipifera L.), mostly in the overstory, and winged elm (Ulmus alata Michx.) and red maple (Acer rubrum L.) were common in the understory. The FACE experiment commenced with two plots (plots 7-8) in 1994 (Oren et al. 2001), with six additional plots (plots 1-6) coming online on 27 August 1996. CO2 enrichment was terminated on 31 October 2010 and post-enrichment data collection continued through 2012. Complete fertilization was applied annually to half of plots 7-8 from 1998 to 2004. The nutrient addition experiment expanded to half of plots 1-6 with a common protocol of N-fertilization in 2005 and continued until 2012. The levels of treatment in this dataset were expressed as ambient CO2 (AMB) or elevated CO2 (ELE) for CO2 treatment and control soil (CONT) or fertilized soil (FERT) for N treatment, respectively.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Duke Forest FACE (FACTS-I): Meteorological and Soil Data

This dataset, collected from Duke Forest Free Air CO2 Enrichment (FACE) – Forest-Atmosphere Carbon Transfer and Storage (FACTS-I) experiment, includes variables describing the meteorological conditions above canopy, within canopy, and soil depending on the variable. The Duke FACE experiment was located in a loblolly pine (Pinus taeda L.) plantation established in 1983. Naturally regenerated broadleaved species including sweetgum (Liquidambar styraciflua L.) and tulip poplar (Liriodendron tulipifera L.), mostly in the overstory, and winged elm (Ulmus alata Michx.) and red maple (Acer rubrum L.) were common in the understory. The FACE experiment commenced with two plots (plots 7-8) in 1994 (Oren et al. 2001), with six additional plots (plots 1-6) coming online on 27 August 1996. The CO2 enrichment was terminated on 31 October 2010 and post-enrichment data collection continued through 2012. Complete fertilization was applied annually to half of plots 7-8 from 1998 to 2004. The nutrient addition experiment expanded to half of plot 1-6 with a common protocol of N-fertilization in 2005. N-fertilization continued until 2012. The data range varied by sensor availability. A summary of information about variable name and data range can be found in the ‘FileDescription_[variable_name].txt’ files.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

The effect of moisture on hydrocarbon-based solvent liquefaction of pine, cellulose and lignin

In this report we examined the effect of moisture on the solvent liquefaction of loblolly pine, cellulose, and lignin in tetralin at 280 °C and pressures ranging from 15 to 70 bar. Solvent liquefaction experiments were conducted in a quasi-batch reactor capable of continuous pressure control and external vapor condensation. Moisture was varied by the controlled addition of de-ionized water. Control over the system pressure subsequently impacted the removal of water vapor from the reactor. Liquid yield decreased by 25, 21, and 35 wt%, for pine, cellulose, and lignin, respectively, when moisture content was increased from 1 to 50 wt% at 42 bar. Humins were observed in the solid residue from liquefaction of wet cellulose. Wet lignin yielded a substantial amount of solid residue compared to dry lignin with a corresponding decrease in total phenolic monomer production. It was concluded that the ionic dissociation of water was an important factor in loss of liquid yield in the presence of water. Although water was less than 20 wt% of the solvent loading in these experiments, it strongly influenced the liquefaction of biomass and biomass components.

09 BIOMASS FUELS↗
DOE OSTI2026

AmeriFlux US-SB1 Sweet Briar Land-Atmosphere Research Station

This is the AmeriFlux version of the carbon flux data for the site US-SB1 Sweet Briar Land-Atmosphere Research Station. Site Description - The facility features a 36.5m (120') triangular tower and a climate-controlled shed laboratory with line power and high speed internet. The site is located in a 27 ha loblolly pine (Pinus taeda) plantation on the campus of Sweet Briar College. The average canopy height is approximately 20 meters in the immediate footprint of the tower, where the loblolly trees are approximately 25 years old. Beyond the loblolly plantation, the site is surrounded by regionally representative, middle-aged, mixed deciduous forest that is dominated by red maple (Acer rubrum), tulip poplar (Liriodendron tulipifera), white oak (Quercus alba), and chestnut oak (Quercus prinus)

Ahlswede, Benjamin [Virginia Tech]↗
DOE OSTI2022

Impact of Tree Age and Anatomical Fraction on Forest Residue Pyrolysis and Hydrotreating

Utilization of cost-advantaged biomass and waste resources to produce clean, domestic biofuels will be a key factor in decarbonizing transportation in the United States. This study investigates how the distribution of anatomical fractions (stem wood, bark, needles, branches) from pine forest residues of different ages impacts pyrolysis and hydrotreating processes, including product composition, carbon efficiency, economics, and overall sustainability. Commercially sourced 13- and 23-year-old loblolly pine residues were chosen to represent available resources; whole tree thinnings, and tops and branches from merchantable timber, respectively. Detailed characterization of the residue samples, product distributions, bio-oil, char, and gas characterization data are presented for 13 experiments, including the individual fractions, blends, and air-classified samples to reduce ash content. Pyrolysis mass balances averaged 97 +/- 3%. As expected, bio-oil yields were lower for the bark, needles, and blends with high proportions of these (53-56% dry basis), and highest for the debarked stem wood (67-71% dry basis). Lower yields were attributed to the high ash content of the needles, but also to the high lignin content in the bark (>50%), which is hypothesized to have led to increased char formation during pyrolysis. Higher-oil yield was generally correlated with total volatiles, hydrogen, oxygen, glucan, and mannan; somewhat correlated with xylan and acetyl content; and negatively correlated with total carbon, fixed carbon, nitrogen, sulfur, and extractives. Air classification of the residues was effective in reducing ash content (1.5% to 0.64%), extractives (~7% to 2%), and sulfur (0.04% to 0.02%), resulting in a small increase in yield, a significant increase in the GC-detectable proportion of oil (27% to 34%) and a net economic benefit. These experimental results were used to conduct technoeconomic and life cycle analyses, which are also summarized here.

biofuels↗
DOE OSTI2021

AmeriFlux US-xLE NEON Lenoir Landing (LENO)

This is the AmeriFlux version of the carbon flux data for the site US-xLE NEON Lenoir Landing (LENO). Site Description - This terrestrial field site is located in a hardwood bottomland with seasonal flooding each spring located in southwest Alabama. The meteorological/flux tower and tower sampling plots are located at Lenoir Landing and the distributed plots are located approximately 5 km south of the tower at Choctaw National Wildlife Refuge. The ecosystem at LENO is dominated by closed-canopy pine-oak mixed forest with a developed understory, and also includes a small fraction of meadows, wetlands, and smaller water bodies. Dominant plant species include American sweetgum (Liquidambar styraciflua), American hornbeam (Carpinus caroliniana), and loblolly pine (Pinus taeda). Choctaw National Wildlife Refuge also provides a protected wintering area for waterfowl and wood duck brood habitat. This site is colocated with the Lower Tombigbee river aquatic site.

Network), NEON (National Ecological Observatory↗
DOE OSTI2026

AmeriFlux FLUXNET-1F US-xLE NEON Lenoir Landing (LENO)

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-xLE NEON Lenoir Landing (LENO). This is the FLUXNET version of the carbon flux data for the site US-xLE NEON Lenoir Landing (LENO) produced by applying the standard ONEFlux (1F) software. Site Description - This terrestrial field site is located in a hardwood bottomland with seasonal flooding each spring located in southwest Alabama. The meteorological/flux tower and tower sampling plots are located at Lenoir Landing and the distributed plots are located approximately 5 km south of the tower at Choctaw National Wildlife Refuge. The ecosystem at LENO is dominated by closed-canopy pine-oak mixed forest with a developed understory, and also includes a small fraction of meadows, wetlands, and smaller water bodies. Dominant plant species include American sweetgum (Liquidambar styraciflua), American hornbeam (Carpinus caroliniana), and loblolly pine (Pinus taeda). Choctaw National Wildlife Refuge also provides a protected wintering area for waterfowl and wood duck brood habitat. This site is colocated with the Lower Tombigbee river aquatic site.

Network), NEON (National Ecological Observatory [N↗
DOE OSTI2023

The Effect of Rapid Development on Soil CO2 Efflux in a Cellulosic Biofuel Stand

As awareness of climate change increases, the need for carbon neutral fuel sources is growing. Lignocellulosic biofuel derived from pine trees has been suggested as one potential energy source; however, it requires more research before its efficacy for climate change mitigation can be determined. Due to the large share of forest carbon held in soils and the extensive area of pine plantations in the southeast U.S., a better understanding of plantation soil carbon dynamics is critical for biofuel carbon accounting. This study evaluated the effects of canopy development and productivity on soil CO2 efflux, a proxy for soil respiration (Rs), in an intensively managed loblolly pine (Pinus taeda) stand over a period from May 2015 to December 2019. We found that leaf area index (LAI) and gross ecosystem production (GEP), as well as meteorological variables, had significant effects on Rs, but that both overall Rs and soil carbon pools did not increase over the course of the study. We thus hypothesize that GEP and LAI had intra-annual effects on Rs, and that the lack of change in Rs is the result of an increase in autotrophic respiration (Ra) that offset a decrease in decomposition of the previous stand’s organic matter.

09 BIOMASS FUELS↗
DOE OSTI2022

AmeriFlux FLUXNET-1F US-NC1 NC_Clearcut

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-NC1 NC_Clearcut. This is the FLUXNET version of the carbon flux data for the site US-NC1 NC_Clearcut produced by applying the standard ONEFlux (1F) software. Site Description - The North Carolina Clearcut site is located in a pine plantation amongst the mixed forests of the North Carolina lower coastal plain. Owned by the Weyerhaeuser Company, the plantation is managed for the purpose of commercial logging. In 2004, 70 ha of 75 year old native hardwoods was harvested. Following the clearcut, the stand was bedded and planted with loblolly pine seedlings. The only significant natural disturbances during the measurement period was a severe drought that lasted from summer of 2007 through 2008. Consequently, the 2007 total amount of precipitation was 486 mm below the 30-year norm.

Noormets, Asko↗
DOE OSTI2020

Corrosion Studies of Pine-Derived Bio-Oil and Heavy Fuel Oil Blends

To reduce the amount of greenhouse gas produced from the combustion of petroleum fuels, renewable liquid fuels are needed. Pyrolysis of biomass provides a means to produce liquid fuels to displace current petroleum products. However, common ferrous alloys are susceptible to high corrosion rates when exposed to bio-oil. This study analyzes the effects of blending bio-oil derived from loblolly pine with heavy fuel oil added to reduce corrosion of common structural alloys. Laboratory corrosion studies of six different blends of bio-oil/heavy fuel oil were performed for 1,000 hours at 50°C. Chemical characterization was also performed to determine the total acid content of each blend. Post-exposure characterizations such as changes in weight, X-ray diffraction, dye penetrant testing, and metallography were performed to provide more insight into the corrosion mechanism of bio-oil/heavy fuel oil blends. We hypothesized that the corrosion rates of ferrous alloys would increase with an increase in bio-oil concentration. The results of these characterization and corrosion studies confirmed this hypothesis and will be reported.

09 BIOMASS FUELS↗
DOE OSTI2023

Failure Modes and Effects Analysis of Biorefinery Pathways

This talk provides an overview of failure modes and effects analysis (FMEA) development and implementation as a systematic criticality and risk assessment tool for biorefinery pathways within the FCIC. This supports a quality by design (QbD) approach, and this talk provides a high-level overview of the results for the FMEA evaluation focused on the generation of pine residue materials for high-temperature pyrolysis conversion. the FMEA interviews included two approaches. The first approach was based around the entire system of unit operations giving a wholistic system level view. The second approach used detailed interviews from individual unit operation within the system allowing for specific failures for individual system components. These two approaches provide different resolutions of information about the reliability and risk. The FMEA results focused on failures associated with meeting critical quality attributes (CQAs) identified for the high temperature conversion of loblolly pine residues and were supplemented with experimental data supporting process upsets and reliability also collected within the consortium. Estimations of risk scores for meeting each given CQA specification, identification of the impacts for not meeting a CQA specification, capturing causes associated with material attributes and process parameters for each failure, identification of current detection methods, and speculation of potential mitigation strategies for decreasing a failure’s risk score were gathered through the FMEA interviews, and were combined to understand the overall process risk metrics and where technology, process, and knowledge improvements are needed in order to de-risk emerging biorefineries.

09 BIOMASS FUELS↗
DOE OSTI2025

The Co-Firing of Pine Biomass and Waste Coal in 100 and 600 MW Power Plants: A Sustainable Approach to Reduce GHG Emissions

Climate change is a global issue that has gained much attention recently. Co-firing biomass with coal/waste coal reduces the electricity sector’s GHG emissions sustainably. This study uses commercial software to model waste coal and biomass co-firing in 100 MW and 600 MW power plants. The objective is to assess the effects of fluid types (subcritical and supercritical), plant capacities (100 MW and 600 MW), boiler types (pulverized coal and circulating fluidized bed boilers), biomass and waste coal co-firing ratios (0:100, 20:80, 40:60, 60:40, 80:20, and 100:0), and carbon capture and storage efficiencies (0%, 90%, 95%, and 97%) on performance parameters such as net plant efficiency, heat rate, net plant CO2 and SO2, and particulate matter emissions. The feedstocks selected for this investigation include anthracite waste coal and loblolly pine biomass. As the biomass fraction increases from 0% to 100%, co-fired power plants net efficiency increases by 3–8%. Supercritical plants had a 6% higher net plant efficiency than the subcritical plants. The study found that the biomass’s high heating value decreased the fuel flow rate and reduced plant CO2 emissions by 10–16%. With 100% biomass power plant feed and 90% carbon capture and storage efficiency, CO2 emissions drop by 83% and SO2 and PM emissions drop to zero.

Bhoi, Prakashbhai R. (ORCID:0000000333104888)↗
DOE OSTI2022

Beyond carbon flux partitioning: Carbon allocation and nonstructural carbon dynamics inferred from continuous fluxes

Carbon (C) allocation and nonstructural carbon (NSC) dynamics play essential roles in plant growth and survival under stress and disturbance. However, quantitative understanding of these processes remains limited. Here, in this work, we propose a framework where we connect commonly measured carbon cycle components (eddy covariance fluxes of canopy CO 2 exchange, soil CO 2 efflux, and allometry-based biomass and net primary production) by a simple mass balance model to derive ecosystem-level NSC dynamics (NSC i ), C translocation (dC i ), and the biomass production efficiency (BPE i ) in above- and belowground plant (i = agp and bgp) compartments. We applied this framework to two long-term monitored loblolly pine (Pinus taeda) plantations of different ages in North Carolina and characterized the variations of NSC and allocation in years under normal and drought conditions. The results indicated that the young stand did not have net NSC flux at the annual scale, whereas the mature stand stored a near-constant proportion of new assimilates as NSC every year under normal conditions, which was comparable in magnitude to new structural growth. Roots consumed NSC in drought and stored a significant amount of NSC post drought. The above- and belowground dC i and BPE i varied more from year to year in the young stand and approached a relatively stable pattern in the mature stand. The belowground BPE bgp differed the most between the young and mature stands and was most responsive to drought. With the internal C dynamics quantified, this framework may also improve biomass production estimation, which reveals the variations resulting from droughts. Overall, these quantified ecosystem-scale dynamics were consistent with existing evidence from tree-based manipulative experiments and measurements and demonstrated that combining the continuous fluxes as proposed here can provide additional information about plant internal C dynamics. Given that it is based on broadly available flux data, the proposed framework is promising to improve the allocation algorithms in ecosystem C cycle models and offers new insights into observed variability in soil–plant–climate interactions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Water use in a young Pinus taeda bioenergy plantation: Effect of intensive management on stand evapotranspiration

Abstract The increasing demand for plant‐derived bioenergy is projected to expand tree plantations with intensive silviculture and improved tree genetics. These silvicultural practices result in faster stand development and canopy closure, which may also influence the systems' water dynamics. Here, we studied the evapotranspiration (ET) of a young (5 years old) intensively managed loblolly pine ( Pinus taeda ) stand and investigated the components of ET to determine its contribution to overall water use. We also compared ET with plantations that received less intensive management to determine whether our stand used more water. We used the eddy covariance method to estimate ecosystem‐level total ET (ET EC ), while plot‐level estimates of ET (ET P ) were obtained via soil lysimeters, sap flow sensors, and throughfall collectors, enabling measurement of the components of ET. Soil evaporation (Es) was the largest component of ET P (36%) over the course of the study, while transpiration and canopy interception accounted for 27% and 22%, respectively. Es decreased with stand development, while transpiration and canopy interception increased. Leaf area index (LAI) and precipitation were the most significant factors controlling ET and its components. Compared to previous studies in different sites that have similar age but lower LAI, our stand had higher water use. This high water use in the early stages of stand development was primarily due to high Es before the canopy was fully developed. While there are potential sources of uncertainty when comparing ET EC and the component fluxes in ET P , results from the two methods were not significantly different. This study had the advantage of using multiple methods to understand and verify the component processes that contribute to ET. Therefore, we recommend that multiple measurement techniques be used in the long‐term observation of ET, and in particular for the evaluation of the impact that intensively managed forests have on water resources in the southeastern United States.

54 ENVIRONMENTAL SCIENCES↗