Search NASA⌕ Search

SEARCH · Search NASA

Results for “Low Reactivity Fuel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Combustion characteristics of diisopropoxymethane, a low-reactivity oxymethylene ether

Oxymethylene ethers (OMEs) have been studied for use as low-sooting diesel fuel additives or substitutes; very little literature discusses OMEs as spark-ignition (SI) fuels due to their typically high cetane numbers. In this work, a lower-reactivity, branched OME, diisopropoxymethane (DIPM), is evaluated to determine its effectiveness as a spark-ignition fuel, as it is the lowest-reactivity OME (as determined by Indicated Cetane Number) thus far evaluated in the literature. DIPM is synthesized in-house via acetalization from isopropanol (iPrOH) and trioxane using standard OME production practices. DIPM was then tested in a rapid compression machine (RCM) for autoignition and spark ignition characteristics, and in a modified CFR engine to determine effective octane numbers. In the RCM, an autoignition temperature sweep was performed at stoichiometric conditions from 1000/T = 1.7 - 1.0, at 5:1 inert ratio (comparable to approximately 25% EGR), where it was found that DIPM has ignition delay times 5–10x faster than isooctane and displays NTC ignition behavior. Blends with iPrOH indicate that reactivity can be matched with isooctane with low blend ratios of iPrOH in DIPM. Flame speeds were tested with a laser spark for ignition in the RCM, where the flame speed of DIPM and isooctane is determined to be comparable at engine relevant conditions. In the CFR engine, effective RON and MON based on pressure trace frequency domain measurements were determined for DIPM and a 15 vol% iPrOH in DIPM blend. Neat DIPM has (R+M)/2 = 59 and a negative sensitivity of S = -18, consistent with its NTC behavior and higher reactivity. Furthermore the DIPM/iPrOH blend has positive sensitivity and a pump-gasoline range (R+M)/2 = 89.3. DIPM on its own is unlikely to be an effective SI fuel, however, when blended with iPrOH as an ON booster, it may be a promising SI candidate fuel.

09 BIOMASS FUELS↗
DOE OSTI2025

High Flux Isotope Reactor Low-Enriched Uranium High Density Silicide Fuel Preliminary Design Update: System Transient Analysis

As a part of conversion efforts from highly enriched uranium (HEU) to low-enriched uranium (LEU) fuel under direction of the National Nuclear Security Administration of the U.S. Department of Energy, multiple proposed designs of the High Flux Isotope Reactor (HFIR) have been created and assessed regarding reactor physics performance metrics, including designs utilizing uranium silicide dispersion fuel (U3Si2-Al). This report updates the previous analyses that evaluated the nuclear safety performance of LEU fuel designs with respect to selected accident events from the HFIR Safety Analysis Report (SAR). Both the Low Density (LD) and High Density (HD) Optimized designs’ reactivity initiated accident fuel performance improved relative to the HEU fuel, attributed to greater 238 U negative Doppler feedback. However, the thermal margins for primary coolant system accidents were reduced with some acceptance criteria unable to be met. The need to resolve reduced thermal margin, open modeling items, and unresolved assumptions was identified.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

AN EXPERIMENTAL STUDY OF FUEL SELECTION FOR A GASOLINE MULTI-MODE

In this study of fuels of different reactivities and their performance in a low-temperature combustion (LTC) engine. The engine was a 2.2L CRDI engine code D4HB provided by industry partner Hyundai America Technical Center inc. (HATCI). The engine was instrumented with in-cylinder pressure sensors allowing for monitoring of the combustion process. First, the engine was operated with standard US pump grade gasoline, Research Octane number (RON) 91 E10, to find initial operation conditions as well as control points of stable operation for daily checks on system conditions. Tested were 8 different fuel blends, the four base blends were provided by Phillips 66 (P66) with a RON value ranging from 60 to 91, and three other variations of these fuels were formulated by splash blending alcohols, iso-butanol, and ethanol, with the RON60 fuel and the final blend, was US RON91 E10 pump gasoline. Using these 8 fuels, the low load performance was analyzed allowing a selection of one of the fuels to be made to proceed with experimentation. To study the low load performance of each fuel, the load was decreased until combustion became too unstable to continue. This was done at 1500 rpm with all of the fuels. At 1200 rpm, the same methodology was applied, though all of the fuels were not tested, only the fuels which showed promise at 1500 rpm. Meaning that the lowest targeted load was achieved without any aid to the combustion process other than advancing combustion, increasing intake air temperature (IAT) for example was not done to maintain consistency across all fuels. The same methodology was applied at 800 rpm based upon the 1200 rpm results to see the ability of the engine to idle with the given fuel. It was found that fuel with a RON of 80 showed good low load performance while allowing for high load performance to be maintained. A blend of 25% Iso-Butanol and 75% RON 60 equated to a RON of 80 and showed good low load performance and showed peak indicated thermal efficiency (ITE) numbers of 46% at 17 bar indicated mean effective pressure (IMEP) and 2200 rpm.

02 PETROLEUM↗
DOE OSTI2023

Non-equilibrium low-temperature plasma-assisted combustion of iso-octane: Perturbing pyrolysis and oxidation kinetics

Here, in this study, a plasma-coupled flow reactor facility is used to examine the effects of non-equilibrium low-temperature plasmas on perturbing the pyrolysis and oxidation kinetics of iso-octane. Experiments were performed in highly dilute reactive mixtures of nitrogen, at near isothermal conditions for temperatures ranging from 523 K to 1203 K. Experiments cumulatively demonstrated enhanced chemical reactivity with the plasma for temperatures below 900 K, and a lowering of the hot-ignition temperature. Detailed kinetic insight was derived from a 0D plasma-coupled kinetic model, utilizing a constructed mechanism that combined both plasma-specific chemistry and the neutral combustion chemistry. For pyrolysis conditions, the model displayed relatively good agreement with fuel consumption and the formation of most intermediates compared to the experimental data, demonstrating the model is able to accurately predict primary radical formation from the plasma directly interacting with the fuel. Enhanced reactivity was attributed to collisional quenching of excited-states of N 2 with fuel, which led to efficient fuel fragmentation and enhancement of the H-radical flux. For oxidation conditions, the model displayed satisfactory agreement with the experiments. Model predictions were able to accurately predict fuel consumption and most intermediate speciation data for T > 800 K, but most discrepancies were towards T < 800 K in particular with oxygenated intermediates. In the presence of oxygen, plasma effects were predominantly spent on efficient enhancement of O- and H-radical fluxes, leading to further fuel fragmentation and initiation of both the OH- and HO 2 -radical pools. Subsequent reactivity of iso-octane was then dictated by the response of the temperature-dependent neutral chemistry. At low-temperatures (T = 643 K), enhanced fuel radicals and O 2 -additon chemistry lead to the formation of oxygenated species, while at intermediate temperatures (T = 843 K) net decrease in OH-radical reactivity led to an increase in hydrocarbon speciation. Near the self-ignition threshold (T = 1163 K), radicals generated by high-temperature branching reactions dominate the oxidation process and effectively ignition. This study ultimately demonstrated that the enhancement of radicals afforded by the plasma causes a deviation in known understanding of iso-octane kinetics in some regards and warrants future studies to reconcile these discrepancies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Rheology and engine performance of very low sulfur fuel oil blended with 10% fast pyrolysis and hydrothermal liquefaction oils in a 2-stroke crosshead engine

The performance and emissions for a downscaled single-cylinder 2-stroke crosshead engine were determined for a very low sulfur fuel oil (VLSFO) when blended with 10 wt.% fast pyrolysis (FP) or hydrothermal liquefaction (HTL) bio-intermediates. The FP and HTL oils were derived from biomass and were observed to contain lower molecular weight (MW) hydrocarbons than neat VLSFO (which was evaluated as a baseline comparison). The addition of either biofuel reduced the overall viscosity of the VLSFO. Aging tests at 50, 90, and 120°C showed that the dynamic viscosity of VLSFO increased with exposure time up to two weeks. Similar trends were observed for the FP and HTL blends, but a pronounced spike in viscosity occurred for these fuels during the early period of exposure. None of the viscosity increases exceeded the operational limits of fuel system pumps. Engine performance studies were conducted under low, medium and high load operational settings. The relative performance of the test fuels was highly dependent on operating condition. In general, the engine results for the three test fuels were similar, but modest improvements in brake thermal efficiency and brake specific fuel consumption were observed, which may be attributed to the heightened reactivity of low molecular weight fraction of the FP and HTL oils.

09 BIOMASS FUELS↗
DOE OSTI2026

Effects of Gasoline Composition and Operating Parameters on the Response of End-Gas Autoignition to Nitric Oxide in a Lean-Burn DI-SI Engine

Lean operation of spark-ignition engines can lead to engine thermal efficiency gains and lower NOx emissions due to reduced combustion temperatures. Yet, lean operation could still face challenges in end-gas autoignition and knock generation due to higher intake pressures and trapped NO in the residual gas. Here, this study evaluates the impact of NO on end-gas autoignition for two gasoline fuels with similar octane rating but different composition: high cycloalkane fuel (HCA) and high olefin fuel (HO). Experiments were performed at stoichiometric and lean (λ = 2) conditions and at two engine speeds of 1400 rpm and 2000 rpm. Accompanying chemical kinetics simulations in CHEMKIN revealed that the mechanisms controlling the effect of NO on autoignition are similar λ = 2 and λ = 1, with NO + HO 2 = NO 2 + OH being the main pathway for enhancing reactivity by promoting low-temperature heat release (LTHR). The compositionally different fuels reacted differently to NO seeding and engine speed, and differences were augmented at λ = 2 compared to λ = 1 as the end-gas autoignition shifted to the low temperature regime. HO, which has inherent low temperature chemistry, was strongly impacted by engine speed at low NO seeding levels, with no noticeable peak of LTHR detected at 2000 rpm. On the other hand, LTHR of HCA was marginally affected by shortened residence time at higher engine speed as NO + HO 2 reaction was not greatly affected by shorter time scales, since HO 2 production was sustained even at 2000 rpm to support OH generation from NO + HO 2 . Contrary to HO, HCA exhibited greater sensitivity to NO seeding, as the increased OH production at higher NO concentrations offset the OH-quenching effect of cyclopentane, which accounts for 28.6% of HCA’s composition. Consequently, a sensitivity analysis revealed that fuels with weak inherent low-temperature chemistry, like HCA, are likely to be more sensitive to variations in NO concentration and charge temperature, whereas fuels with strong low temperature chemistry are more sensitive to variations in end-gas λ and intake pressure.

Energy↗
DOE OSTI2021

Startup Test Plan and Predictions for Highly Enriched Uranium to Low-Enriched Uranium Fuel Conversion at the University of Missouri Research Reactor

Nonpower reactors licensed by the U.S. Nuclear Regulatory Commission require a startup test plan as part of any facility modification to verify operability prior to resumption of operations. In order to support conversion of the University of Missouri Research Reactor from the use of highly enriched uranium to low-enriched uranium (LEU) fuel, a startup test plan has been devised to measure certain reactor physics parameters for the initial all-fresh LEU core licensing documentation that will be submitted. These parameters include the approach to critical, primary coolant void coefficient of reactivity, flux trap void coefficient of reactivity, determination of flux trap sample reactivity worth, radial and axial thermal neutron flux mapping, control blade worth calibration, primary and pool coolant temperature coefficient of reactivity, and flux mapping of experimental positions. Here, predictions for these parameters made using the Monte Carlo N-Particle Version 5 (MCNP5) radiation transport code are reported. These predictions will support the startup tests by providing a baseline set of expectations and additional insight into the performance of the LEU core.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Influence of ozone addition on the low-temperature oxidation of dimethyl ether in a jet-stirred reactor

The influence of ozone addition on the low-temperature oxidation of dimethyl ether (DME) was investigated experimentally in an atmospheric-pressure jet-stirred reactor, over the temperature range of 400–800 K. Detailed speciation information was obtained by employing synchrotron vacuum ultraviolet photoionization mass spectrometry. Experimental results revealed that the ozone addition had a positive influence on the production of the highly reactive intermediates. Moreover, the low-temperature reactivity of DME was significantly enhanced, which resulted in the broadening of the temperature window of fuel consumption and intermediates formation at lower temperatures. Therefore, novel experimental data of the low temperature regime (400–500 K) could be obtained. The data set of this special temperature regime yielded insights into the DME low-temperature kinetics, which were further supported with modeling analysis based on two existing DME models (Metcalfe et al., 2013; Wang et al., 2015) combined with an ozone sub-mechanism (Zhao et al., 2016). The analysis showed that temperature-sensitive reactions such as the second oxygen channel could be nearly “frozen” at this low temperature (T < 440 K). Furthermore, the production of some intermediates was found to be strongly governed by reaction pairs, such as CH 3 OCH 2 + O 2 = CH 3 OCH 2 O 2 and CH 3 OCH 2 + O 2 = 2 CH 2 O + OH for the CH 2 O formation. This finding could be useful for examining branching ratios in both models, and the analysis suggested the further modification of the branching ratios for the oxygen addition to CH 3 OCH 2 O 2 pathways and the CH 3 OCH 2 O 2 self-reactions were required. Finally, the influences of the O 3 addition in the sensitive reactions of the fuel initial low-temperature oxidation were investigated in this work. It was interesting to note that O 3 addition could change the dominating reactions in the initial low-temperature oxidation, by the addition of some O 3 -related pathways with relatively high sensitivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Numerical investigation of equivalence ratio effects on Flex-Fuel mixing controlled combustion enabled by prechamber ignition

There is interest in adapting renewable and low-carbon intensity fuels to heavy-duty engines to help displace criteria and greenhouse gas emissions associated with diesel combustion. Low-carbon fuels have inherently low cetane numbers and thus pose a significant challenge when considering direct substitution in diesel combustion systems. Use of an actively fueled prechamber as an ignition source to initiate mixing-controlled combustion (PC-MCC) of low-cetane fuels is becoming an attractive combustion mode to alleviate the identified reactivity deficit. This work focuses on the utilization of an active prechamber to facilitate diesel-like combustion of bioethanol-gasoline fuel blends in a heavy-duty engine. Recent results in this emerging technology suggest that ignition quality is uniquely coupled to prechamber equivalence ratio. In this numerical study, the fundamental implications of prechamber equivalence ratio on the ignition performance of direct injected fuels ranging from E10 to E100 are investigated using CONVERGE. Parametric studies of the prechamber operating strategy were assessed at diesel-like conditions to characterize the performance trends relative to a diesel baseline at the same boundary conditions. Simulation results indicate that PC-MCC is flex-fuel capable and achieves diesel-like ignition qualities and combustion processes for all fuels considered under stoichiometric and rich prechamber conditions. To characterize the equivalence ratio trends observed, a novel inflow boundary modeling technique was utilized to prescribe turbulent jets in place of the prechamber where selective speciation of the jet composition was conducted to isolate the ignition contributions of radical and reacting species in lean, stoichiometric, and rich jets. The inflow boundary modeling suggests that excess fuel and combustion intermediates present in jets produced from stratified and fuel-rich prechamber operation promotes higher jet temperatures and as such are superior ignition sources. Relative to a lean prechamber jet, the peak temperature of a reacting jet from a rich prechamber was up to 600 K hotter at fixed distances from the orifice exit. Furthermore, radicals also demonstrated an influence on the ignition process, but the combustion mode was identified to be thermally dominant.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

A comparative reactivity study of 1-alkene fuels from ethylene to 1-heptene

In this work, a comparative reactivity study of 1-alkene fuels from ethylene to 1-heptene has been performed using ignition delay time (IDT) measurements from both a high-pressure shock tube and a rapid compression machine, at an equivalence ratio of 1.0 in ‘air’, at a pressure of 30 atm in the temperature range of 600–1300 K. At low temperatures (< 950 K), the results show that 1-alkenes with longer carbon chains show higher fuel reactivity, with 1-pentene being the first fuel to show negative temperature coefficient (NTC) behavior followed by 1-hexene and 1-heptene. At high temperatures (> 950 K), the experimental results show that all of the fuels except propene show very similar fuel reactivity, with the IDTs of propene being approximately four times longer than for all of the other 1-alkenes. To analyze the experimental results, a chemistry mechanism has been developed using consistent rate constants for these alkenes. At 650 K, flux analyses show that hydroxyl radicals add to the double bond, followed by addition to molecular oxygen producing hydroxy-alkylperoxy radicals, which can proceed via the Waddington mechanism or alternate internal H-atom isomerizations in chain branching similar to those for alkanes. We have found that the major chain propagation reaction pathways that compete with chain branching pathyways mainly produce hydroxyl rather than hydroperoxyl radicals, which explains the less pronounced NTC behavior for larger 1-alkenes compared to their corresponding alkanes. At 1200 K, flux analyses show that the accumulation of hydroperoxyl radicals is important for the auto-ignition of 1-alkenes from propene to 1-heptene. The rate of production of hydroperoxyl radicals for 1-alkenes from 1-butene to 1-heptene is higher than that for propene, which is due to the longer carbon chain facilitating hydroperoxyl radical formation via more efficient reaction pathways. This is the major reason that propene presents lower fuel reactivity than the other 1-alkenes at high temperatures.

1-Alkene↗
DOE OSTI2020

Impact of Selected High-Performance Fuel Blends on Three-Way Catalyst Light Off under Synthetic Spark-Ignition Engine-Exhaust Conditions

The U.S. Department of Energy funded Co-Optimization of Fuels and Engines initiative aims to simultaneously develop advanced engines along with high-performance fuels to reduce petroleum consumption. The engine exhaust of spark-ignited light-duty vehicles contains pollutants such as nitrogen oxides, carbon monoxide (CO), and non-methane organic gases. When operated above their “light-off” temperature, three-way catalysts (TWCs) efficiently control the emissions of these pollutants from the vehicle exhaust. However, below the catalyst light-off temperature, during cold start, the TWCs are not effective. Thus, the stringent environmental regulations necessitate cold-start compliance of advanced engines operating on novel fuels for commercialization. Exhaust composition strongly impacts the effectiveness of TWCs. Hence, ensuring that the high-performance fuels under consideration do not have detrimental effects on current emissions control technology is necessary. To mitigate cold-start emissions, a low light-off temperature of the fuel on the TWC is desirable. As real-world fuels are multicomponent blends, we conducted investigations into the light-off behavior of representative fuel mixtures on a three-mode redox-aged commercial TWC under synthetic engine-exhaust conditions. The high-performance fuels in this study included 10–30% volumetric levels of ethanol, isobutanol, diisobutylene, and an aromatic mixture. Each of these high-performance fuel components was mixed into a gasoline surrogate blendstock for oxygenate blending (BOB). Our results showed that aromatics and alkenes in the surrogate BOB inhibit low-temperature reactivity of alkanes, alcohols, and CO on the TWC and dominate the blend light-off behavior. All the high-performance fuel blends had a very similar light-off behavior to the surrogate gasoline BOB, indicating that blending up to 30% (by vol.) of high-performance blendstocks in a gasoline base fuel can potentially reduce greenhouse gas emissions through improved engine efficiency and petroleum displacement without jeopardizing the ability to meet emissions regulations. While some high-performance blendstocks demonstrated lower light-off temperatures than a surrogate gasoline blend, taking advantage of the higher catalytic reactivity of these blendstocks to reduce cold-start emissions would require reducing the aromatic content in petroleum-based market fuels.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Improving Conversion of Captured CO 2 on Mixed-Oxide Dual-Function Materials by Low-Concentration Metal Promotion

Reactive carbon capture (RCC) is a promising nascent approach to harness the untapped resource of waste CO 2 to produce fuels and platform chemicals. However, process economics relies on the design of dual-function materials (DFMs) that exhibit maximal conversion of captured CO 2 and high selectivity toward valuable carbon products (e.g., CO). Herein, we report the use of low-concentration (ca. 0.5 wt %) metal promotors (Pt and Au) to improve the conversion of captured CO 2 on a Zn-Al mixed-oxide DFM by >30%, while also more than doubling per-cycle CO yield due to enhanced retention of captured CO 2 and H 2 activation. In situ DRIFTS of bound CO 2 on the DFMs showed distinctions in surface carbonate formation for the Pt- and Au-modified materials that were correlated with product evolution during the reactive desorption step of RCC. Particularly, Pt afforded superior H 2 activation but formed irreversibly-bound bicarbonates, compromising overall productivity, while the Na/Au/ZA DFM predominantly adsorbed CO 2 on Na sites, resulting in polydentate carbonates that are retained until higher temperatures before conversion to CO. In conclusion, these results indicate that adding a low concentration of oxidation-resistant noble metals, especially Au, is an effective strategy for improving key performance metrics of Zn-Al mixed-oxide DFMs to further advance the development of scalable RCC technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Simulations of Fuel-Air Mixing in a 7 Element Lean Direct Injection (LDI) Aviation Combustor

The increased accessibility of commercial aviation to the general population has in-creased the conventional jet fuel consumption, thereby causing increased CO2 emissions. One of the strategies to reduce the environmental impact is to use sustainable aviation fuels (SAFs). SAFs are jet fuels obtained from renewable resources such as biomass and waste streams such as plastics/municipal solid wastes. Even though the use of SAFs has been gaining importance over the last two decades, only a few numerical studies on their usage have been reported so far. In this study, two SAFs namely, Alcohol to Jet (ATJ) and Hydrotreated Esters and Fatty Acids (HEFA), are chosen and their use in a simple, Lead Direct Injection (LDI) combustor is studied. The focus of this study is limited to the thermo-chemical properties of the fuels and their impact on fuel distribution and evaporation. Hence, only non-reactive simulations are performed. A high accuracy, adaptive mesh refinement based low-Mach solver, PeleLMeX, is used for performing the simulations. The time-averaged flow results indicate faster evaporation of HEFA when compared to ATJ and Jet-A. The difference in fuel evaporation rates is attributed to the differences in fuel viscosity and surface tension properties and the concomitant variations in the fuel droplet size distributions.

adaptive mesh refinement↗
DOE OSTI2023

Simulations of Fuel-Air Mixing in a 7 Element Lean Direct Injection (LDI) Aviation Combustor: Preprint

The increased accessibility of commercial aviation to the general population has in-creased the conventional jet fuel consumption, thereby causing increased CO2emissions. One of the strategies to reduce the environmental impact is to use sustainable aviation fuels (SAFs). SAFs are jet fuels obtained from renewable resources such as biomass and waste streams such as plastics/municipal solid wastes. Even though the use of SAFs has been gaining importance over the last two decades, only a few numerical studies on their usage have been reported so far. In this study, two SAFs namely, alcohol to jet (ATJ) and hydrotreated esters and fatty acids (HEFA), are chosen and their use in a simple, lead direct injection (LDI) combustor is studied. The focus of this study is limited to the thermo-chemical properties of the fuels and their impact on fuel distribution and evaporation. Hence, only non-reactive simulations are performed. A high accuracy, adaptive mesh refinement based low-Mach solver, PeleLMeX, is used for performing the simulations. The time-averaged flow results indicate faster evaporation of HEFA when compared to ATJ and Jet-A. The difference in fuel evaporation rates is attributed to the differences in fuel viscosity and surface tension properties and the concomitant variations in the fuel droplet size distributions.

adaptive mesh refinement↗
NASA NTRSDate not supplied

Effect of Aromaticity on Soot Formation: A Reactive Molecular Dynamics Study

This study investigates the formation of soot from n-dodecane and its blend with m-xylene under pyrolytic and low-oxygen conditions with reactive molecular dynamics (MD) simulations. ReaxFF force field is used to simulate the interactions of fuel and oxygen molecules at engine-relevant conditions (2500-3500 K and 70-75 bar). Fuel molecules with carbon atom density of 0.03 g/cm 3 are dispersed into a cube and constant temperature simulations are carried out with a Nosé-Hoover thermostat. Pyrolysis of n-dodecane and the chemical pathway towards the formation of aromatic hydrocarbons are investigated. The initial pyrolysis rate of n-dodecane is observed to be slightly higher with the addition of aromatic compounds and oxygen. While the first aromatics formed from the decomposed n-dodecane are phenyl radicals at 2500 K, decomposition of the aliphatic fuel compound is observed to be necessary to build a carbon cluster, and eventually soot. Morphological properties of the created soot particles are also analyzed. The maturity, size and aromatics content of the soot particle are slightly affected with the addition of m-xylene and oxygen at 3500 K within the 3 ns simulation time possibly due the formation of larger and more condensed aromatic rings, resulting in larger soot molecules. The outcomes of this study provide important insights into the formation mechanism of soot and its morphological characteristics depending on varying fuel concentrations at pyrolysis and low oxygen engine conditions. Results of this analysis will further contribute to the understanding of contrail formation on generated soot particles originated from the combustion of different chemical components with particle chemistry matching companion experiments.

soot formation↗
DOE OSTI2020

THERMAL SAFETY MARGIN CALCULATION OF THE MP-2 EXPERIMENT IN THE ADVANCED TEST REACTOR

The Mini-Plate 2 (MP-2) irradiation test is a fueled experiment designed for irradiation in multiple test locations in the Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL). The experiment is a drop-in test where small aluminum-clad fuel plate samples (mini plates) are cooled directly by the ATR Primary Coolant System (PCS) water. The MP-2 fuel plate experiment will be irradiated in several different irradiation locations of the ATR. This fueled experiment contains aluminum-clad fuel mini plates consisting of monolithic U-Mo. Four different types of fuel plates with fuel meat thickness and cladding are part of the MP-2 test. A thermal analysis has been performed on the MP-2 experiment. A method for calculating Departure from Nucleate Boiling Ratio (DNBR) and Flow Instability Ratio (FIR) during a reactivity transient using the commercial finite element and heat transfer code ABAQUS is discussed. At the start of an ATR cycle the heat generation rate of the fueled experiment is high and the heat rate multiplier from the outer shim control cylinders is low, while the reverse is true at the end of the ATR cycle. Thermal analyses at 10 day increments during the cycle calculate the DNBR and FIR during a reactivity transient. This technique calculates DNBR for the fuel plate surfaces and FIR for all water components for each finite element surface and node at various times during the ATR cycle. Heat rates vary with time during the transient calculation that are provided by a detailed physics analysis. Oxide growth on the fuel plates is also incorporated Results from the transient calculations are displayed with the ABAQUS post processor. By calculating these parameters at each location in the finite element model, conservatism is replaced with accuracy. This allows for a greater margin for the thermal hydraulic safety parameters.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Octane Index Applicability over the Pressure-Temperature Domain

Modern boosted spark-ignition (SI) engines and emerging advanced compression ignition (ACI) engines operate under conditions that deviate substantially from the conditions of conventional autoignition metrics, namely the research and motor octane numbers (RON and MON). The octane index (OI) is an emerging autoignition metric based on RON and MON which was developed to better describe fuel knock resistance over a broader range of engine conditions. Prior research at Oak Ridge National Laboratory (ORNL) identified that OI performs reasonably well under stoichiometric boosted conditions, but inconsistencies exist in the ability of OI to predict autoignition behavior under ACI strategies. Instead, the autoignition behavior under ACI operation was found to correlate more closely to fuel composition, suggesting fuel chemistry differences that are insensitive to the conditions of the RON and MON tests may become the dominant factor under these high efficiency operating conditions. This investigation builds on earlier work to study autoignition behavior over six pressure-temperature (PT) trajectories that correspond to a wide range of operating conditions, including boosted SI operation, partial fuel stratification (PFS), and spark-assisted compression ignition (SACI). A total of 12 different fuels were investigated, including the Co-Optima core fuels and five fuels that represent refinery-relevant blending streams. It was found that, for the ACI operating modes investigated here, the low temperature reactions dominate reactivity, similar to boosted SI operating conditions because their PT trajectories lay close to the RON trajectory. Additionally, the OI metric was found to adequately predict autoignition resistance over the PT domain, for the ACI conditions investigated here, and for fuels from different chemical families. This finding is in contrast with the prior study using a different type of ACI operation with different thermodynamic conditions, specifically a significantly higher temperature at the start of compression, illustrating that fuel response depends highly on the ACI strategy being used.

02 PETROLEUM↗
DOE OSTI2022

Replicating HCCI-like autoignition behavior: What gasoline surrogate fidelity is needed?

This work seeks to characterize the fidelity needed in a gasoline surrogate with the intent to replicate the complex autoignition behavior exhibited within advanced combustion engines, and specifically Homogeneous Charge Compression Ignition (HCCI). A low-temperature gasoline combustion (LGTC) engine operating in HCCI mode and a rapid compression machine (RCM) are utilized to experimentally quantify fuel reactivity, through autoignition and preliminary heat release characteristics. Fuels considered include a research grade E10 U.S. gasoline (RD5-87), three multi-component surrogates (PACE-1, PACE-8, PACE-20), and a binary surrogate (PRF88.4). Each fuel was studied at lean/HCCI-like conditions covering a wide range of temperatures and pressures that are representative of naturally aspirated to high boost engine operation. Detailed chemical kinetic modeling is also undertaken using a recently updated gasoline surrogate kinetic model to simulate the RCM experiments and to provide chemical insight into surrogate-to-surrogate differences. The LGTC engine experiments demonstrate nearly identical reactivity between PACE-20 and RD5-87 across studied conditions, while faster phasing is seen for both PACE-1 and PACE-8 due to their stronger intermediate- and low-temperature heat release (ITHR/LTHR) at naturally aspirated and boosted conditions, respectively. The RCM experiments reveal typical low-temperature, negative temperature coefficient (NTC) and intermediate-temperature autoignition behaviors at all pressure conditions for RD5-87, which are qualitatively reproduced by all surrogates. Quantitative discrepancies in both autoignition and preliminary heat release are observed for all surrogates, while their ability to replicate RD5-87 autoignition behavior follows the order of PACE-20 > PACE-1 > PACE-8 > PRF88.4. Excellent mapping is obtained between the LGTC engine and the RCM, where the engine pressure-time trajectories can be characterized by the regimes represented by the RCM autoignition isopleths. The kinetic model performs commendably when simulating both autoignition and preliminary heat release of PACE-20, while typically overpredicting ignition delay times for PACE-1, PACE-8 and PRF88.4 at high-pressure and low-temperature/NTC conditions. Sensitivity and rate of production (ROP) analyses highlight surrogate-to-surrogate differences in the governing chemical kinetics where n-pentane initiates rapid OH branching at a faster rate and an earlier timing for PACE-20 than iso-pentane does for PACE-1 and PACE-8, making it computationally more reactive than the other surrogates. The current study highlights the need to include non-standardized properties, such as the lean/HCCI-like autoignition characteristics, in addition to ASTM properties (e.g., RON, MON) as metrics of fuel reactivity and targets to be matched when formulating high-fidelity surrogates that fully capture gasoline advanced combustion behavior such as HCCI-like autoignition.

42 ENGINEERING↗