Search NASA⌕ Search

SEARCH · Search NASA

Results for “Low-temperature superconductors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Spin excitations and flat electronic bands in a Cr-based kagome superconductor

In the quest for topology- and correlation-driven quantum states, kagome lattice materials have garnered significant interest for their band structures, featuring flat bands (FBs) from the quantum destructive interference of the electronic wavefunction. Tuning an FB to the chemical potential could induce electronic instabilities and emergent orders. Despite extensive studies, direct evidence of FBs tuned to the chemical potential and their role in emergent orders in bulk materials remains lacking. Using angle-resolved photoemission spectroscopy, resonant inelastic X-ray scattering, and density functional theory, we show that the low-energy structure of the Cr-based kagome metal superconductor CsCr 3 Sb 5 is dominated by FBs at the Fermi level. We also observe low-energy magnetic excitations evolving across the low-temperature transition, largely consistent with the FB shift. Our results suggest that the low-temperature order contains a magnetic origin and that the kagome FBs may play a role in the emergence of this order.

electronic properties and materials↗
DOE OSTI2022

Orbital selective Kondo effect in heavy fermion superconductor UTe2

Abstract Heavy fermion systems emerge from the collective Kondo effect, and their superconductivity can serve as a promising platform for realizing next-generation quantum technologies. However, it has been a great challenge to explore many-body effects in heavy fermion systems with ab-initio approaches. We computed the electronic structure of UTe 2 without purposive judgements, such as intentional selection of on-site Coulomb interaction and disregarding spin-orbit coupling. We show that U-5 f electrons are highly localized in the paramagnetic normal state, giving rise to the Kondo effect. It is also found that the hybridization between U-5 f and U-6 d predominantly in the orthorhombic a b -plane is responsible for the high-temperature Kondo effect. In contrast, the hybridization between U-5 f and Te-5 p along the c -axis manifests the Kondo scattering at a much lower temperature, which could be responsible for the low-temperature upturn of the c -axis resistivity. Our results show that the electron correlation in UTe 2 is orbital selective, which naturally elucidates the recent experimental observations of anomalous temperature dependence of resistivity. Furthermore, we suggest that the Kondo effect is suppressed at high pressure owing to weak localization of magnetic moments, which results from enhanced U-5 f electron hopping. Our discovery provides significant insight toward understanding anisotropic quantum behavior including selective re-entrant superconductivity in heavy fermion UTe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Connection between f -electron correlations and magnetic excitations in UTe 2

The detailed anisotropic dispersion of the low-temperature, low-energy magnetic excitations of the candidate spin-triplet superconductor UTe 2 is revealed using inelastic neutron scattering. The magnetic excitations emerge from the Brillouin zone boundary at the high symmetry Y and T points and disperse along the crystallographic $\hat{b}$ -axis. In applied magnetic fields to at least μ 0 H = 11 T along the $\hat{c}-{\rm{axis}}$ , the magnetism is found to be field-independent in the (hk0) plane. The scattering intensity is consistent with that expected from U 3+ /U 4+ f-electron spins with preferential orientation along the crystallographic $\hat{a}$ -axis, and a fluctuating magnetic moment of μ eff =1.7(5) μ B . We propose interband spin excitons arising from f-electron hybridization as a possible origin of the magnetic excitations in UTe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Ubiquitous spin freezing in the superconducting state of UTe 2

In most superconductors electrons form Cooper pairs in a spin-singlet state mediated by either phonons or by long-range interactions such as spin fluctuations. The superconductor UTe 2 is a rare material wherein electrons are believed to form pairs in a unique spin-triplet state with potential topological properties. While spin-triplet pairing may be mediated by ferromagnetic or antiferromagnetic fluctuations, experimentally, the magnetic properties of UTe 2 are unclear. By way of muon spin rotation/relaxation (μSR) measurements on independently grown UTe 2 single crystals we demonstrate the existence of magnetic clusters that gradually freeze into a disordered spin frozen state at low temperatures. Our findings suggest that inhomogeneous freezing of magnetic clusters is linked to the ubiquitous residual linear term in the temperature dependence of the specific heat (C) and the low-temperature upturn in C/T versus T. The omnipresent magnetic inhomogeneity has potential implications for experiments aimed at establishing the intrinsic low-temperature properties of UTe 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Designing the stripe-ordered cuprate phase diagram through uniaxial-stress

The ability to efficiently control charge and spin in the cuprate high-temperature superconductors is crucial for fundamental research and underpins technological development. Here, we explore the tunability of magnetism, superconductivity and crystal structure in the stripe phase of the cuprate La 2-x Ba x CuO 4 , with x = 0.115 and 0.135, by employing temperature-dependent (down to 400 mK) muon-spin rotation and AC susceptibility, as well as X-ray scattering experiments under compressive uniaxial stress in the CuO 2 plane. A sixfold increase of the 3-dimensional (3D) superconducting critical temperature T c and a full recovery of the 3D phase coherence is observed in both samples with the application of extremely low uniaxial stress of 0.1 GPa. This finding demonstrates the removal of the well-known 1/8-anomaly of cuprates by uniaxial stress. On the other hand, the spin-stripe order temperature as well as the magnetic fraction at 400 mK show only a modest decrease under stress. Moreover, the onset temperatures of 3D superconductivity and spin-stripe order are very similar in the large stress regime. However, a substantial decrease of the magnetic volume fraction and a full suppression of the low-temperature tetragonal structure is found at elevated temperatures, which is a necessary condition for the development of the 3D superconducting phase with optimal T c . Our results evidence a remarkable cooperation between the long-range static spin-stripe order and the underlying crystalline order with the three-dimensional fully coherent superconductivity. Overall, these results suggest that the stripe- and the SC order may have a common physical mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Robust superconductivity and the suppression of charge-density wave in the quasi-skutterudites Ca 3 ( Ir 1 – x Rh x ) 4 Sn 13 single crystals at ambient pressure

Single crystals of the quasi-skutterudite compounds Ca 3 (Ir 1-x Rh x ) 4 Sn 13 (3–4–13) were synthesized by flux growth and characterized by x-ray diffraction, energy dispersive x-ray spectroscopy, magnetization, resistivity, and radio frequency magnetic susceptibility techniques. The coexistence and competition between the charge density wave (CDW) and superconductivity was studied by varying the Rh/Ir ratio. The superconducting transition temperature, T c , varies from 7 K in pure Ir (x = 0) to 8.3 K in pure Rh (x = 1). Temperature-dependent electrical resistivity reveals monotonic suppression of the CDW transition temperature, T CDW (x). The CDW starts in pure Ir, x = 0, at T CDW ≈ 40 K and extrapolates roughly linearly to zero at x c ≈ 0.53–0.58 under the superconducting dome. Magnetization and transport measurements show a significant influence of CDW on superconducting and normal states. Meissner expulsion is substantially reduced in the CDW region, indicating competition between the CDW and superconductivity. The low-temperature resistivity is higher in the CDW part of the phase diagram, consistent with the reduced density of states due to CDW gapping. Its temperature dependence just above T c shows signs of non-Fermi liquid behavior in a cone-like composition pattern. We conclude that the Ca 3 (Ir 1-x Rh x ) 4 Sn 13 alloy is a good candidate for a composition-driven quantum critical point at ambient pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Performance of low-loss demountable joints between CORC ® cable-in-conduit-conductors at magnetic fields up to 8 T developed for fusion magnets

Abstract High-temperature superconductors (HTS) are promising candidates for use in the high-field magnets needed in particle accelerators and fusion reactors. HTS conductor on round core (CORC ® ) cables and wires wound from ReBa 2 Cu 3 O 7- x (REBCO) coated tapes are being developed for use in high-field magnet applications including fusion magnets operating at currents beyond 80 kA, requiring them to be bundled into cable-in-conduit conductor (CICC) configurations. The use of HTS cables enable demountable superconducting fusion magnets that would allow easier access to the fusion machine for maintenance and parts replacement. Such demountable magnets require practical, low-resistance joints, capable of injecting current uniformly into the many REBCO tapes that make up different cable designs. Optimization steps on CORC ® cables have resulted in high-current terminations and joints with a joint resistance measured between a pair of 30-tape CORC ® cables of 51 nΩ at 76 K and 1.9 nΩ at 4 K. Demountable joints between CICCs consisting of six CORC ® cables arranged in flat and round configurations were also tested and compared to joints between low-temperature superconducting (LTS) CICCs consisting of NbTi Rutherford cables. Samples were paired into two configurations (LTS-to-LTS and HTS-to-HTS) with a demountable joint between them that were each tested in series with currents up to 10 000 A in an applied background magnetic field of up to 8 T. The total loop resistance of the HTS-to-HTS sample, including their terminations and joint, was about 4 nΩ at 4 K in self-field with the resistance of the copper pressed joint being less than 1 nΩ. At 8 T, the total loop resistance increased to 6.9 nΩ with the pressed joint contributing 1.4 nΩ. These initial tests prove the feasibility of producing remountable (dry) joints with low resistance between superconducting magnet windings in future compact fusion machines.

Physics↗
DOE OSTI2024

The nontrivial effects of annealing on superconducting properties of Nb single crystals

The effect of annealing on the superconducting properties of niobium single crystals was studied using optical, magnetic, and scanning tunneling microscopy (STM) methods. Pieces of the same crystal boule were studied before and after the annealing at 800 ${^\circ}\textrm{C}$, 1400 ${^\circ}\textrm{C}$, and near the melting point of niobium (2477 ${^\circ}\textrm{C}$). The initial samples had a high hydrogen content and low-temperature imaging revealed large hydrides (hundreds of micrometers) appearing below 190 K. The formation of these large precipitates is already completely suppressed by annealing at 800 ${^\circ}\textrm{C}$. However, the overall superconducting properties of the annealed samples did not improve and, in fact, worsened. In particular, the superconducting transition temperature decreased, the upper critical field increased, and the pinning strength increased. In the STM study, the sample was annealed initially at 400 ${^\circ}\textrm{C}$, measured, annealed at 1700 ${^\circ}\textrm{C}$, and measured again. The STM revealed a ‘dirty’ superconducting gap with a significant spatial variation in tunneling conductance after annealing at 400 ${^\circ}\textrm{C}$. The clean gap was recovered after annealing at 1700 ${^\circ}\textrm{C}$. This is likely due to oxygen redistribution near the surface, which is always covered by oxide layers in as-grown crystals. Our results indicate that vacuum annealing at least up to 1400 ${^\circ}\textrm{C}$, while removing a large percentage of hydrogen, introduces additional nanosized defects, likely hydride precipitates, that act as efficient pair-breaking and pinning centers. The dimensionless scattering rate is estimated to have increased from $\Gamma = 0.2$ to about $\Gamma = 0.4$ after annealing at 1400 ${^\circ}\textrm{C}$. These results on single crystals differ drastically from those obtained in polycrystalline bulk niobium (i.e. cut from superconducting radio-frequency cavities), where annealing is known to have a significant positive effect that is attributed to the improvement of the crystalline structure masking the more subtle influence of the hydrides.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Breaking electron pairs in the pseudogap regime of SmTiO 3 − SrTiO 3 − SmTiO 3 quantum wells

The strongly correlated two-dimensional electron liquid within SmTiO 3 /SrTiO 3 /SmTiO 3 quantum well structures exhibits a pseudogap phase when the quantum well width is sufficiently narrow. Using low-temperature transport and optical experiments that drive the quantum-well system out of equilibrium, we find evidence of mobile, long-lived, negatively charged quasiparticles, consistent with the idea that the pseudogap phase arises from strongly bound electron pairs. As a result, these experimental results establish a connection between quantum confinement and enhanced electron pairing, which may provide a pathway to higher-temperature superconductors.

Correlated electronics↗
DOE OSTI2024

Microscopic study of the impurity effect in the kagome superconductor La⁢(Ru 1–x ⁢Fe x ) 3 ⁢Si 2

Here, we report on the effect of magnetic impurities on the microscopic superconducting (SC) properties of the kagome-lattice superconductor La⁢(Ru 1–x Fe x ) 3 ⁢Si 2 using muon spin relaxation/rotation. A strong suppression of the superconducting critical temperature T c , the SC volume fraction, and the superfluid density was observed. We further find a correlation between the superfluid density and T c which is considered a hallmark feature of unconventional superconductivity. Most remarkably, measurements of the temperature-dependent magnetic penetration depth λ reveal a change in the low-temperature behavior from exponential saturation to a linear increase, which indicates that Fe doping introduces nodes in the superconducting gap structure at concentrations as low as x=0.015. Our results point to a rare example of unconventional superconductivity in the correlated kagome lattice and accessible tunability of the superconducting gap structure, offering new insights into the microscopic mechanisms involved in superconducting order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

From nonmetal to strange metal at the stripe-percolation transition in La 2 - x Sr x CuO 4

The nature of the normal state of cuprate superconductors continues to stimulate considerable speculation. Of particular interest has been the linear temperature dependence of the in-plane resistivity in the low-temperature limit, which violates the prediction for a Fermi liquid. We present measurements of anisotropic resistivity in La$_{2–x}$Sr$_x$CuO$_4$ that confirm the strange-metal behavior for crystals with doped-hole concentration $p = x > p^* \sim 0.19$ and contrast with the nonmetallic behavior for $p < p^*$. We propose that the changes at $p^*$ are associated with a first-order transition from doped Mott insulator to conventional metal; the transition appears as a crossover due to intrinsic dopant disorder. We consider results from the literature that support this picture; in particular, we present a simulation of the impact of the disorder on the first-order transition and the doping dependence of stripe correlations. Below $p^*$, the strong electronic interactions result in charge and spin stripe correlations that percolate across the CuO 2 planes; above $p^*$, residual stripe correlations are restricted to isolated puddles. Here we suggest that the $T$-linear resistivity results from scattering of quasiparticles from antiferromagnetic spin fluctuations within the correlated puddles. This is a modest effect compared to the case at $p < p^*$, where the data suggest that there are no coherent quasiparticles in the normal state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Design and Assembly of a Large-Aperture Nb 3 Sn Cos-Theta Dipole Coil With Stress Management in Dipole Mirror Configuration

The stress-management cos-theta (SMCT) coil is a new concept which has been proposed and is being developed at Fermilab in the framework of US Magnet Development Program (US-MDP) for high-field and/or large-aperture accelerator magnets based on low-temperature and high-temperature superconductors. The SMCT structure is used to reduce large coil deformations under the Lorentz forces and, thus, the excessively large strains and stresses in the coil. A large-aperture Nb 3 Sn SMCT dipole coil has been developed and fabricated at Fermilab to demonstrate and test the SMCT concept including coil design, fabrication technology and performance. The first SMCT coil has been assembled with 60-mm aperture Nb 3 Sn coil inside a dipole mirror configuration and will be tested separately and in series with the insert coil. Here this paper summarizes the large-aperture SMCT coil design and parameters and reports the coil fabrication steps and its assembly in dipole mirror configuration.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

REBCO Insert Coils toward High-Field, Large-Bore Magnet for Quantum Physics Research

High-temperature superconducting (HTS) magnets offer a promising solution for generating high magnetic fields efficiently and economically, serving as a vital component in nextgeneration scientific instruments and carbon-neutral power systems, notably in cost-effective compact fusion reactors. These high magnetic fields play a pivotal role in advancing research on quantum materials, particularly in elucidating the intricate electronic states near magnetic phase transitions. Here, this paper delves into the research conducted at the Princeton Plasma Physics Laboratory, which is divided into three phases aimed at overcoming technical hurdles in creating large-bore, high-field HTS magnets for cutting-edge quantum physics research. In Phase 1, we designed, constructed, and tested a compact REBCO solenoidal magnet comprising six double-pancake coils featuring a 41.3-mm inner diameter and a 70.0-mm outer diameter. It adopts a no-insulation approach to ensure electrical and thermal stability. Successful testing in a saturated liquid nitrogen bath confirmed its capability to generate a 0.8-T field at 77 K and 2 T at 65 K, with ongoing integration into liquid helium testing. Building on this experience, Phase 2 involves the design of an HTS insert coil, intended to nest within a 12-T low-temperature superconducting (LTS) outsert to achieve a minimum of 20 T at 4.2 K. The focus of Phase 2 centers on addressing challenges posed by screening-current (SC) effects, particularly the associated stress/strain issues. Employing a numerical model that fully couples the SC and mechanical analysis, we discuss strategies for managing stress to mitigate the effects of SCinduced stress concentrations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Development and test of a large-aperture Nb3Sn cos-theta dipole coil with stress management

The stress-managed cos-theta (SMCT) coil is a new concept which was proposed and is being developed at Fermilab in the framework of US Magnet Development Program (US-MDP) for high-field and/or large-aperture accelerator magnets based on low-temperature and high-temperature superconductors. A 120-mm aperture two-layer Nb3Sn SMCT dipole coil has been developed at Fermilab to demonstrate and test the SMCT concept including coil design, fabrication technology and performance. The first SMCT demo coil was fabricated and assembled with 60-mm aperture Nb3Sn coil inside a dipole mirror configuration and tested separately and in series with the insert coil. This paper summarizes the design, parameters, and quench performance of the 120-mm aperture SMCT coil in a dipole mirror configuration.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

High Field Magnet Programme -- European Strategy Input

In this submission, we describe research goals, implementation, and timelines of the High Field Magnet Programme, hosted by CERN. The programme pursues accelerator-magnet R&D with low-temperature- and high-temperature superconductor technology with a main focus on the FCC-hh. Following a long tradition of magnet R&D for high-energy particle colliders, HFM R&D fosters important societal impact through synergies with other fields.

43 PARTICLE ACCELERATORS↗
NASA NTRS1992

SNS Heterojunctions With New Combinations Of Materials

New combinations of materials proposed for superconductor/normal-metal/superconductor (SNS) heterojunctions in low-temperature electronic devices such as fast switches, magnetometers, and mixers. Epitaxial heterojunctions formed between high-temperature superconductors and either oxide semiconductors or metals. Concept offers alternative to other three-layer heterojunction concepts; physical principles of operation permit SNS devices to have thicker barrier layers and fabricated more easily.

Vasquez, Richard P.↗
NASA NTRS1995

Test Of A Microwave Amplifier With Superconductive Filter

Report describes design and low-temperature tests of low-noise GaAs microwave amplifier combined with microstrip band-pass filter. Two versions of microstrip filter used in alternate tests; in one version, microstrips formed as films of high-transition-temperature superconductor Y/Ba/Cu/O on lanthanum aluminate substrate with gold film as ground plane. Other version identical except microstrips as well as ground plane made of gold, normally conductive.

Bhasin, K. B.↗
NASA NTRS2009

X-Ray Calorimeter Arrays for Astrophysics

High-resolution x-ray spectroscopy is a powerful tool for studying the evolving universe. The grating spectrometers on the XMM and Chandra satellites started a new era in x-ray astronomy, but there remains a need for instrumentation that can provide higher spectral resolution with high throughput in the Fe-K band (around 6 keV) and can enable imaging spectroscopy of extended sources, such as supernova remnants and galaxy clusters. The instrumentation needed is a broad-band imaging spectrometer - basically an x-ray camera that can distinguish tens of thousands of x-ray colors. The potential benefits to astrophysics of using a low-temperature calorimeter to determine the energy of an incident x-ray photon via measurement of a small change in temperature was first articulated by S. H. Moseley over two decades ago. In the time since, technological progress has been steady, though full realization in an orbiting x-ray telescope is still awaited. A low-temperature calorimeter can be characterized by the type of thermometer it uses, and three types presently dominate the field. The first two types are temperature-sensitive resistors - semiconductors in the metal-insulator transition and superconductors operated in the superconducting-normal transition. The third type uses a paramagnetic thermometer. These types can be considered the three generations of x-ray calorimeters; by now each has demonstrated a resolving power of 2000 at 6 keV, but only a semiconductor calorimeter system has been developed to spaceflight readiness. The Soft X-ray Spectrometer on Astro-H, expected to launch in 2013, will use an array of silicon thermistors with I-IgTe x-ray absorbers that will operate at 50 mK. Both the semiconductor and superconductor calorimeters have been implemented in small arrays, kilo-pixel arrays of the superconducting calorimeters are just now being produced, and it is anticipated that much larger arrays will require the non-dissipative advantage of magnetic thermometers.

Kilbourne, Caroline A.↗