Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lunar Slope”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Effect of photogrammetric reading error on slope-frequency distributions

The effect of reading error on two hypothetical slope frequency distributions and two slope frequency distributions from actual lunar data in order to ensure that these errors do not cause excessive overestimates of algebraic standard deviations for the slope frequency distributions. The errors introduced are insignificant when the reading error is small and the slope length is large. A method for correcting the errors in slope frequency distributions is presented and applied to 11 distributions obtained from Apollo 15, 16, and 17 panoramic camera photographs and Apollo 16 metric camera photographs.

Moore, H. J.↗
NASA NTRS1982

Effects of fractional crystallization and cumulus processes on mineral composition trends of some lunar and terrestrial rock series

A plot of Mg of mafic minerals versus An of plagioclase in cumulate rocks from various lunar and terrestrial rock series shows each series to have a distinct curvilinear trend. The slopes of these trends vary from nearly vertical in the case of lunar anorthosites and Mg-norites to nearly horizontal in the case of gabbros from the mid-Atlantic ridge. Calculations based upon known major element partitioning between mafic minerals, plagioclase and subalkaline basaltic liquids indicate that fractional crystallization coupled with cotectic accumulation of mafic minerals and plagioclase will produce mineral composition trends on the Mg versus An diagram with slopes greater than 1 for cases where An is approximately greater than Mg. Furthermore, fractional crystallization of basaltic magmas with alkali concentrations approaching zero will produce near vertical Mg versus An trends. Therefore, the steep slopes of the lunar rock series are consistent with relatively simple fractionation processes. The relatively flat slope of mineral compositions from gabbros collected from the mid-Atlantic ridge at 26 deg N is inconsistent with simple fractionation processes, and calculations show that periodic refilling of a fractionating magma chamber with picritic magma cannot simply explain this flat slope either.

Longhi, J.↗
NASA NTRS2012

Topographically Induced Thermal Effects on Lunar Hydrogen Distributions: Correlated Observations from the LRO LEND and LOLA Instruments

The question of whether water exists on the Moon's surface has long been an enigma to Lunar researchers. Largely, this was due to the thermally extreme lunar surface environment that would seem to preclude any long term maintenance, manufacture, transport or accumulation of hydrogen (H) volatiles over most of the lunar surface. As a result, for many years the cold permanent shadow regions (PSR) in the bottoms of craters near the lunar poles appeared to provide the basic conditions at least for maintenance of lunar hydrogen. Importantly, recent discoveries indicate that there is some hydrogen at the poles. However, the picture of the lunar hydrogen budget may be more complex than the PSR hypothesis has suggested. This evidence comes from observations by the Lunar Exploration Neutron Detector (LEND) onboard the Lunar Reconnaissance Orbiter (LRO) that inclici1te 1) some H concentrations lie outside PSR and 2) though a few of the larger PSR's have high hydrogen, PSR does not appear to be an independent factor influencing the large-scale suppression of polar epithermals observed by LEND and the Lunar Prospector Neutron Spectrometer. In this research we investigate the possibility that the thermal contrast between pole-facing and equator facing-slopes is a factor influencing the surface distributions of lunar H. We perform this bulk correlated observation and study by developing a thermal proxy from slope data of the Lunar Orbiting Laser Altimeter (LOLA) digital elevation model (DEM) which is registered with the collimated LEND epithermal map. From the LOLA transforms we impose a thermal functional decomposition and systematic statistical analysis of the LEND epithermal map. Our hypothesis testing suggests in most high latitude bands studied> +/- 45 deg: Epithermal rates in pole-facing slopes are significantly lower than epithermal rates in equivalent equator-facing slopes. As a control study, we find that there is no statistically significant difference between equivalent east and west facing slopes. This finding suggests topographic modulation of insolation is a factor influencing the lunar H budget. Importantly, this result is consistent with observations in terrestrial, Martian research.

McClanahan, T. P.↗
NASA NTRS1977

Origin and relative age of lunar and Mercurian intercrater plains

Differences in the diameter/density distribution of craters in the size range 7-100 km between heavily cratered areas and areas of intercrater plains indicate the deposition of both lunar and Mercurian intercrater plains has preferentially obliterated craters not greater than about 30 km diameter. This obliteration has altered the original lunar population distribution function from about a -1.3 slope to about -0.7 slope. At least a significant portion of both the lunar and Mercurian intercrater plains appear to be volcanic deposits emplaced during the later stages of heavy bombardment on each body rather than basin ejecta or an ancient primordial surface. The very widespread distribution of intercrater plains on Mercury compared to the moon may be related to Mercury's core formation which would have resulted in a large radius increase leading to widespread extensional fracturing to provide egress for the eruption of volcanic deposits on a global scale. This was followed by a radius decrease due to contraction of the lithosphere to produce thrust faulting represented by Mercury's lobate scarps.

Strom, R. G.↗
NASA NTRS1972

Soil mechanics

Preliminary results are presented of an investigation of the physical and mechanical properties of lunar soil on the Descartes slopes, and the Cayley Plains in the vicinity of the LM for Apollo 16. The soil mechanics data were derived form (1) crew commentary and debriefings, (2) television, (3) lunar surface photography, (4) performance data and observations of interactions between soil and lunar roving vehicle, (5) drive-tube and deep drill samples, (6) sample characteristics, and (7) measurements using the SRP. The general characteristics, stratigraphy and variability are described along with the core samples, penetrometer test results, density, porosity and strength.

Mitchell, J. K.↗
NASA NTRS1971

Lunar surface engineering properties experiment definition. Volume 2: Mechanics of rolling sphere-soil slope interaction

The soil deformation mode under the action of a rolling sphere (boulder) was determined, and a theory based on actual soil failure mechanism was developed which provides a remote reconnaissance technique for study of soil conditions using boulder track observations. The failure mechanism was investigated by using models and by testing an instrumented spherical wheel. The wheel was specifically designed to measure contact pressure, but it also provided information on the failure mechanism. Further tests included rolling some 200 spheres down sand slopes. Films were taken of the rolling spheres, and the tracks were measured. Implications of the results and reevaluation of the lunar boulder tracks are discussed.

Hovland, H. J.↗
NASA NTRS1977

Equipotential doming in flooded circular basins on the moon

A procedure is presented that permits determination of the shape of the gravity field due to an arbitrary mass configuration with circular symmetry. The procedure is used to model the shape of the field associated with the lunar circular basins. The mean slopes of the equipotential surfaces generated by a superisostatic deposit corresponding to a near-surface Crisium-size mascon are calculated to fall within the range from 1:700 to 1:1000; those generated by a mantle rebound of the same excess mass, at 60 km below the lunar surface, cluster around the value of 1:1500.

Roth, L. E.↗
NASA NTRS1986

Radar investigation of asteroids

The number of radar detected asteroids has climbed from 6 to 40 (27 mainbelt plus 13 near-Earth). The dual-circular-polarization radar sample now comprises more than 1% of the numbered asteroids. Radar results for mainbelt asteroids furnish the first available information on the nature of these objects at macroscopic scales. At least one object (2 Pallas) and probably many others are extraordinarily smooth at centimeter-to-meter scales but are extremely rough at some scale between several meters and many kilometers. Pallas has essentially no small-scale structure within the uppermost several meters of the regolith, but the rms slope of this regolith exceeds 20 deg., much larger than typical lunar values (approx. 7 deg.). The origin of these slopes could be the hypervelocity impact cratering process, whose manifestations are likely to be different on low-gravity, low-radius-of-curvature objects from those on the terrestrial planets. The range of mainbelt asteroid radar albedoes is very broad and implies big variations in regolith porosity or metal concentration, or both. The highest albedo estimate, for 16 Psyche, is consistent with a surface having porosities typical of lunar soil and a composition nearly completely metallic. Therefore, Psyche might be the collisionally stripped core of a differentiated small plant, and might resemble mineralogically the parent bodies of iron meteorites.

Ostro, S. J.↗
NASA NTRS1984

Martian Crater Size Distributions and Terrain Age

The crater size/frequency distributions of large ( 8 km) craters on the Moon and terrestrial planets display two very different curves representing two crater populations. The heavily cratered regions of the Moon, Mercury, and Mars show the same highly structured curve which cannot be represented by a single slope distribution function. In contrast, the lunar post mare crater population has a size/frequency distribution which differs significantly from that in the highlands over the same diameter range, and can be represented by a single-slope distribution function of -2.8 differential. On areas of martian lightly cratered northern plains, the crater population is essentially identical to that of the post mare population. This indicates that the same two families of impacting objects were responsible for the cratering records on both Moon and Mars. The thickness of mantling material varies among the various plains units, and can be calculated from the depth/diameter scaling relations for martian craters.

Nadine G Barlow↗
NASA NTRS2012

Space Weathering Products Found on the Surfaces of the Itokawa Dust Particles: A Summary of the Initial Analysis

Surfaces of airless bodies exposed to interplanetary space gradually have their structures, optical properties, chemical compositions, and mineralogy changed by solar wind implantation and sputtering, irradiation by galactic and solar cosmic rays, and micrometeorite bombardment. These alteration processes and the resultant optical changes are known as space weathering [1, 2, 3]. Our knowledge of space weathering has depended almost entirely on studies of the surface materials returned from the Moon and regolith breccia meteorites [1, 4, 5, 6] until the surface material of the asteroid Itokawa was returned to the Earth by the Hayabusa spacecraft [7]. Lunar soil studies show that space weathering darkens the albedo of lunar soil and regolith, reddens the slopes of their reflectance spectra, and attenuates the characteristic absorption bands of their reflectance spectra [1, 2, 3]. These changes are caused by vapor deposition of small (<40 nm) metallic Fe nanoparticles within the grain rims of lunar soils and agglutinates [5, 6, 8]. The initial analysis of the Itokawa dust particles revealed that 5 out of 10 particles have nanoparticle-bearing rims, whose structure varies depending on mineral species. Sulfur-bearing Fe-rich nanoparticles (npFe) exist in a thin (5-15 nm) surface layer (zone I) on olivine, low-Ca pyroxene, and plagioclase, suggestive of vapor deposition. Sulfur-free npFe exist deeper inside (<60 nm) ferromagnesian silicates (zone II). Their texture suggests formation by amorphization and in-situ reduction of Fe2+ in ferromagnesian silicates [7]. On the other hand, nanophase metallic iron (npFe0) in the lunar samples is embedded in amorphous silicate [5, 6, 8]. These textural differences indicate that the major formation mechanisms of the npFe0 are different between the Itokawa and the lunar samples. Here we report a summary of the initial analysis of space weathering of the Itokawa dust particles.

Noguchi, T.↗
NASA NTRS1971

Lunar surface mechanical properties from Surveyor data.

During the Surveyor program spacecraft were successfully landed at five widely separated lunar locations. Recent computer simulations of each landing have provided more comprehensive data on the mechanical properties of the lunar surface than have been obtained previously by this method of analysis. Results show that the variations in surface bearing pressure observed at the various lunar sites are probably due to surface slope effects and do not necessarily indicate differences in soil properties at these sites. Estimates of cohesion at two sites give almost identical results and further support the conclusion that the soil properties at all sites are probably very similar. Surface pressures that resist horizontal (plowing) motion are largely due to cohesion, and density and gravitational contributions are small. It is concluded that the lunar surface bearing strength is essentially zero at the surface and, for zero surface slope, increases with penetration depth at a rate of 1.87 (plus or minus 0.33) N/cu cm. The cohesion of the lunar soil is estimated to be between 0.11 and 0.17 N/sq cm.

Jones, R. H.↗
NASA NTRS2011

Isolation Effects on the Moon: High Topographic Slope Observations from the LRO and LOLA Instruments

The extremely low temperatures in the Moon's polar permanent shadow regions (PSR) has long been considered a unique factor necessary for entrapping volatile Hydrogen (H). However, recent discoveries indicate some H concentrations lie outside PSR, suggesting other geophysical factors may also influence H distributions. In this study we consider insolation and its resulting thermal effects as a loss/redistribution process influencing the Moon's near-surface < 1m volatile H budget. To isolate regional (5deg latitude band) insolation effects we correlate two data sets collected from the ongoing, 1.5 year long mapping mission of the Lunar Reconnaissance Orbiter (LRO). Epithermal neutron mapping data from the Lunar Exploration Neutron Detector (LEND) is registered and analyzed in the context of slope derivations from Lunar topography maps produced by the Lunar Observing Laser Altimeter (LOLA). Lunar epithermal neutrons are inferred to be direct geochemical evidence for near-surface H due to the correlated suppression of surface leakage fluxes of epithermal neutrons with increased H concentration. Regional suppressions of neutrons seen in LEND maps are considered localized evidence of H concentration increase in the upper 1 m of the Lunar surface. To quantify spatially localized insolation effects, LEND data are averaged from sparsely distributed pixels, classed as a function of the LOLA slope derivations.

McClanahan, T. P.↗
NASA NTRS1965

Strength of the lunar dust.

Strength of overlay of granular material on Moon estimated from Ranger VII photographs, showing fairly steep slopes covered with dust

LUNAR DUST↗
NASA NTRS1999

Space Weathering in the Fine Size Fractions of Lunar Soils: Soil Maturity Effects

The effects of space weathering on the optical properties of lunar materials have been well documented. These effects include a reddened continuum slope, lowered albedo, and attenuated absorption features in reflectance spectra of lunar soils as compared to finely comminuted rocks from the same Apollo sites. However, the regolith processes that cause these effects are not well known, nor is the petrographic setting of the products of these processes fully understood. A Lunar Soil Characterization Consortium has been formed with the purpose of systematically integrating chemical and mineralogical data with the optical properties of lunar soils. Understanding space-weathering effects is critical in order to fully integrate the lunar sample collection with remotely-sensed data from recent robotic missions (e.g., Lunar Prospector, Clementine, and Galileo) We have shown that depositional processes (condensation of impact-derived vapors, sputter deposits, accreted impact material, e.g., splash glass, spherules, etc.) are a major factor in the modification of the optical surfaces of lunar regolith materials. In mature soils, it is the size and distribution of the nanophase metal in the soil grains that has the major effect on optical properties. In this report, we compare and contrast the space-weathering effects in an immature and a mature soil with similar elemental compositions. For this study, we analyzed <10 micron sieve fractions of two Apollo 17 soils, 79221 (mature, Is/FeO = 81) and 71061 (immature, Is/FeO = 14). Details of the sieving procedures and allocation scheme are given else where. The results of other detailed chemical, mineralogical, and spectroscopic analyses of these soil samples are reported elsewhere. A representative sample of each soil was embedded in low-viscosity epoxy, and thin sections (about 70nm thick) were obtained through ultra microtomy. The thin sections used for these analyses typically contained cross sections of up to 500 individual grains. The thin sections were studied using a JEOL 2010 transmission electron microscope (TEM) equipped with a thin window energy-dispersive X-ray (EDX) spectrometer. An individual thin section was selected from each soil, and for each grain in the section we determined (1) the elemental composition by EDX; (2) whether the grain was crystalline or glassy using electron diffraction and darkfield imaging; (3) the presence or absence of rims and accreted material; and (4) the distribution of nanophase Fe where present. Most of the categories are self-evident; however, we divide the agglutinate derived material into agglutinitic glass (glass with approximately the same composition as the bulk soil that contains nanophase Fe with or without vesicles) and agglutinate fragments, which are composed of crystalline grains and agglutinitic glass. Lithic fragments are defined as polymineralic grains with no glass. Pyroxene grains have been divided into high- and low-Ca groups. As expected, there are a number of differences in the petrography of the <10-microns fractions of 79221 and 71061 given the great difference in their respective maturities, but we focus here on two major distinctions: agglutinate content and the number of grains with micropatina. Slightly over 50% of the particles in 79221 consist of agglutinitic glass and agglutinate fragments, while the remainder are predominantly crystalline mineral grains. The agglutinic glass particles contain abundant nanophase Fe and vesicles. Angular particles are rare, with most showing smooth, rounded exteriors, Of the mineral grains analyzed thus far, over 90% of the grains have amorphous rims that contain nanophase Fe (these rims are believed to have formed by vapor deposition and irradiation effects). The nanophase Fe in these rims probably accounts for a significant fraction of the increase in Is/FeO measured in these size fractions. In addition to the rims, the majority of particles also show abundant accreted material in the form of glass splashes and spherules that also contain nanophase Fe. In stark contrast, the surfaces of the mineral grains in the 71061 sample are relatively prisitine, as only about 14% of the mineral grains in the sample exhibited amorphous rims. Furthermore, the mineral particles are more angular and show greater surface roughness than in the mature sample. Accreted material on particle surfaces is rare. Agglutinitic material is a major component of the 71061 sample; however, nanophase Fe and vesicles are not as well developed as in the 79221 sample. It is now recognized that nanophase Fe is probably the main agent in modifying the optical properties of lunar soil grains. The most important result of this study is the observation that in the fine size fractions of mature soils, nearly every grain has nanophase Fe within 100 run of the particle surface. (Additional Information contained in original)

Keller, L. P.↗
NASA NTRS2020

A Concept for the Deployment of a Large Lunar Crater Radio Telescope Using Teams of Tethered Robots

Kilometer-scale craters on the far side of the Moon have unique potential as future locations for large radio telescopes, which can observe the universe at wavelengths and frequencies (> 10 m, < 30 MHz) not possible with conventional Earth or orbital-based approaches. Distinct advantages of building a Lunar Crater Radio Telescope (LCRT) on the far side include i) isolation from radio noise due to the Earth’s ionosphere, orbiting satellites, and the Sun, ii) days of uninterrupted dark/cold sky viewing during lunar night, and iii) terrain geometry naturally suited for constructing the largest mesh antenna structure in the Solar System. A key challenge to constructing LCRT on the Moon is related to the complexity of deploying a 1-km diameter antenna and hanging receiver within a lunar crater whose diameter, depth, and slope are 3-5 km, 1 km, and ~30 degrees respectively. In this paper, we first evaluate the trade space for deploying a large, complex structure within a crater, and then provide a more detailed concept evaluation of our favored approach, which employs coordinated teams of tethered rovers to extract and suspend a folded antenna from a lander at the base of a crater. NASA’s Jet Propulsion Laboratory in collaboration with California Institute of Technology (Caltech) have developed a novel robotic system for accessing extremely steep terrains; the Axel rover is a two-wheeled rugged terrain vehicle that is supported by an electro-mechanical tether that provides power, data, and tensile support from a top-side anchor location. Recently, a pair of Axel robots have been used in a DuAxel configuration that allows for four-wheel driving and repeated passive anchoring at different locations. The DuAxel system has unique advantages for deploying an LCRT antenna, including the ability to deploy from a lander near a crater, drive a distance to the crater rim to deploy an Axel, and later, retract the deployed Axel in order to sequentially lift up sections of the antenna. Our proposed concept involves delivering a packaged antenna and receiver to the bottom-center of a crater floor on a lander, then later sending a team of multiple DuAxel rovers to retrieve guide wires from the lander, which are pulled to the top of the crater. We explore this concept in detail and provide some initial quantitative analysis to demonstrate the feasibility of our system with respect to the spatial and mass properties of the antenna as juxtaposed to DuAxel capabilities. Finally, we outline next steps towards validating our concept on the way to a future lunar deployment opportunity.

Hallinan, Greg↗
NASA NTRS1993

Optical effects of space weathering on lunar soils and the role of the finest fraction

Lunar soils represent a cumulative product of space weathering and as such they exhibit distinct optical alteration. In comparison to the optical properties of similar rock powders, lunar soils are darker, have weaker diagnostic absorption bands, and exhibit a characteristic red continuum slope between 0.3 and 4.5 microns. Well-developed (mature) lunar soils have a mean grain size of about 60 microns and may contain more than 50 percent agglutinates (complex, glass-welded aggregates) which were previously believed to be the principal carriers of optical alteration resulting from space weathering. A detailed analysis of the spectral reflectance properties of the bulk soil, size separates, and agglutinate separates of several Apollo and Luna soils has been undertaken to evaluate the validity of the agglutinate paradigm for optical effects of space weathering. The data and results are summarized here which indicate that the finest fraction of natural lunar soils, rather than larger complex agglutinates, carries the principal effects of optical alteration. Bidirectional reflectance spectra were obtained using the small sample configuration of the RELAB facility, which accommodates 5-30 mg of material. Spectra are displayed with the labels for individual samples listed in order of brightness.

Pieters, C. M.↗
NASA NTRS2019

Diurnally Migrating Lunar Water: Evidence from Ultraviolet Data

Data from the Lunar Reconnaissance Orbiter Lyman Alpha Mapping Project and Diviner are consistent with surface water on the Moon varying in abundance with both terrain type and local time/temperature. A thermal desorption model including latitudinally varying desorption activation energy reproduces the observations. We interpret the observed variability in spectral slopes as water molecules in the uppermost lunar regolith (<1% of a monolayer) thermally adsorbing and desorbing from grains depending upon the local temperature and availability of chemisorption sites. The Lyman Alpha Mapping Project data also demonstrate that in the Earth's magnetotail, where the solar wind source of protons is absent, a decrease in H2O on the surface is not observed. This rules out a steady state process involving aprompt solar wind source and favors a migration mechanism for the distribution of adsorbed water onthe Moon.

Diurnally↗