Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

The electrical conductivity of the Earth's upper mantle as estimated from satellite measured magnetic field variations

Low latitude magnetic field variations (magnetic storms) caused by large fluctuations in the equatorial ring current were derived from magnetic field magnitude data obtained by OGO 2, 4, and 6 satellites over an almost 5 year period. Analysis procedures consisted of (1) separating the disturbance field into internal and external parts relative to the surface of the Earth; (2) estimating the response function which related to the internally generated magnetic field variations to the external variations due to the ring current; and (3) interpreting the estimated response function using theoretical response functions for known conductivity profiles. Special consideration is given to possible ocean effects. A temperature profile is proposed using conductivity temperature data for single crystal olivine. The resulting temperature profile is reasonable for depths below 150-200 km, but is too high for shallower depths. Apparently, conductivity is not controlled solely by olivine at shallow depths.

Didwall, E. M.↗
NASA NTRS1997

Modeling boot-shaped coronal holes using SOHO-MDI magnetic measurements

The boot-shaped coronal hole observed between the 22 and 30 August 1996, reproduced by rigidly rotating the data computed on 27 August with the rotation rate near the solar equator, is discussed. The data were acquired by the Michelson Doppler imager (MDI) onboard the Solar and Heliospheric Observatory (SOHO). The results suggest that change in size and shape of the holes observed during the period is caused by the projection effect. It was found that the whole solar observational synoptic chart may be used to approximately reproduce boot-shaped holes in solar minimum.

Zhao, X. P.↗
NASA NTRS1963

EXPLORER 10 MAGNETIC FIELD MEASUREMENTS

Magnetic-field and plasma-flux measurements by explorer 10 in traversing the geomagnetic field and extending into the interplanetary medium

GEOMAGNETIC FIELD↗
NASA NTRS1988

First Viking results - Magnetic field measurements

The magnetic field experiment on the Swedish Viking satellite consists of a triaxial fluxgate magnetometer system with the sensors mounted on a 2-m boom. Transverse magnetic field perturbations are readily observed which identify the large-scale auroral and cusp-region Birkeland current (BC) systems. A sharp gradient was observed in the dayside region near apogee and 08:40 MLT during a pass on March 25, 1986 which has been interpreted as an earthward-flowing BC of 8 micro-A/sq m. When projected to ionospheric altitudes it is estimated that the current density is 200 micro-A/sq m.

Potemra, T. A.↗
NASA NTRS2011

Fiber-Optic Magnetic-Field-Strength Measurement System for Lightning Detection

A fiber-optic sensor system is designed to measure magnetic fields associated with a lightning stroke. Field vector magnitudes are detected and processed for multiple locations. Since physical limitations prevent the sensor elements from being located in close proximity to highly conductive materials such as aluminum, the copper wire sensor elements (3) are located inside a 4-cubic-in. (.66-cubic-cm) plastic housing sensor head and connected to a fiber-optic conversion module by shielded cabling, which is limited to the shortest length feasible. The signal path between the conversion module and the avionics unit which processes the signals are fiber optic, providing enhanced immunity from electromagnetic radiation incident in the vicinity of the measurements. The sensors are passive, lightweight, and much smaller than commercial B-dot sensors in the configuration which measures a three-dimensional magnetic field. The system is expandable, and provides a standard-format output signal for downstream processing. Inside of the sensor head, three small search coils, each having a few turns on a circular form, are mounted orthogonally inside the non-metallic housing. The fiber-optic conversion module comprises three interferometers, one for each search coil. Each interferometer has a high bandwidth optical phase modulator that impresses the signal received from its search coil onto its output. The output of each interferometer travels by fiber optic cable to the avionics unit, and the search coil signal is recovered by an optical phase demodulator. The output of each demodulator is fed to an analog-to-digital converter, whose sampling rate is determined by the maximum expected rate of rise and peak signal magnitude. The output of the digital processor is a faithful reproduction of the coil response to the incident magnetic field. This information is provided in a standard output format on a 50-ohm port that can be connected to any number of data collection and processing instruments and/or systems. The measurement of magnetic fields using fiber-optic signal processing is novel because it eliminates limitations of a traditional B-dot system. These limitations include the distance from the sensor to the measurement device, the potential for the signal to degrade or be corrupted by EMI from lightning, and the size and weight of the sensor and associated plate.

Gurecki, Jay↗
NASA NTRS1994

A dynamic method for magnetic torque measurement

In a magnetic suspension system, accurate force measurement will result in better control performance in the test section, especially when a wider range of operation is required. Although many useful methods were developed to obtain the desired model, however, significant error is inevitable since the magnetic field distribution of the large-gap magnetic suspension system is extremely nonlinear. This paper proposed an easy approach to measure the magnetic torque of a magnetic suspension system using an angular photo encoder. Through the measurement of the velocity change data, the magnetic torque is converted. The proposed idea is described and implemented to obtain the desired data. It is useful to the calculation of a magnetic force in the magnetic suspension system.

Lin, C. E.↗
NASA NTRS2023

Statistical Decomposition and Machine Learning to Clean In Situ Spaceflight Magnetic Field Measurements

Robust in situ magnetic field measurements are critical to understanding the various mechanisms that couple mass, momentum, and energy throughout our solar system. However, the spacecraft on which magnetometers are often deployed contaminate the magnetic field measurements via onboard subsystems including reaction wheels and magnetorquers. Two magnetometers can be deployed at different distances from the spacecraft to determine an approximation of the interfering field for subsequent removal, but constant data streams from both magnetometers can be impractical due to power and telemetry limitations. Here we propose a method to identify and remove time-varying magnetic interference from sources such as reaction wheels using statistical decomposition and convolutional neural networks, providing high-fidelity magnetic field data even in cases where dual-sensor measurements are not constantly available. For example, a measurement interval from the Parker Solar Probe outboard magnetometer experienced a 95.1% reduction in reaction wheel interference following application of the proposed technique.

magnetic field data↗
NASA NTRS1987

Properties of a large-scale interplanetary loop structure as deduced from low-energy proton anisotropy and magnetic field measurements

Correlated particle and magnetic field measurements by the ISEE 3 spacecraft are presented for the loop structure behind the interplanetary traveling shock event of Nov. 12, 1978. Following the passage of the turbulent shock region, strong bidirectional streaming of low-energy protons is observed for approximately 6 hours, corresponding to a loop thickness of about 0.07 AU. This region is also characterized by a low relative variance of the magnetic field, a depressed proton intensity, and a reduction in the magnetic power spectral density. Using quasi-linear theory applied to a slab model, a value of 3 AU is derived for the mean free path during the passage of the closed loop. It is inferred from this observation that the proton regime associated with the loop structure is experiencing scatter-free transport and that either the length of the loop is approximately 3 AU between the sun and the earth or else the protons are being reflected at both ends of a smaller loop.

Tranquille, C.↗
NASA NTRS1979

Lightning location and lower-ionospheric height determination from two-station magnetic field measurements

Wide band magnetic direction finding from two stations is used to determine lightning locations and ionospheric height during two nocturnal maritime thunderstorms near Florida. A comparison of calculated lightning locations with radar reflectivity data of the two storms indicates systematic direction-finding errors to be on the order of 1 deg. From the lightning locations and measured arrival times of the first and second sky waves, ionospheric reflecting heights for both sky waves were determined. The effective heights for the first and second sky waves may differ, leading to large errors in single-station determinations of ionospheric height, such as in the method described by Kinzer (1974). The distribution of peak electric fields for the strokes studied is shown to be in reasonable agreement with other determinations, indicating the reliability of the present measurements.

Mcdonald, T. B., III↗