Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC SURFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Debye screening and injection of positrons across the magnetic surfaces of a pure electron plasma in a stellarator

Just as quasineutral plasmas, pure electron plasmas display collective behavior and screen externally imposed electrostatic potentials. However, for pure electron plasmas, the screening of large negative potentials is fully nonlinear and deviates significantly from the textbook Debye screening. Such potentials create an evacuated region that may penetrate a long distance away from the source of the potential perturbation. An analytic model for this case is presented and compared to numerical solutions of the pure electron plasma equilibrium equation in a stellarator. Debye screening in non-neutral plasmas is asymmetric; in a pure electron plasma, negative potentials are not screened as effectively as positive potentials. Because external potentials can penetrate deep into the plasma, they can have a strong effect on particle orbit quality. Importantly, the assessment of transport driven by internal objects, e.g., diagnostic rods, depends on this. Numerical calculations are presented, showing that the poor shielding of negative potentials can be used not only to perturb and worsen confinement of a pure electron plasma, but can also be used to improve confinement modestly and can be used for injection of positrons across the magnetic surfaces in an initially pure electron plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A setup combining magneto-optical Kerr effect and conversion electron Moessbauer spectrometry for analysis of the near-surface magnetic properties of thin films

We propose a system allowing the characterization of thin magnetic multilayer structures that combine conversion electron Moessbauer spectrometry (CEMS) under applied magnetic field with the magneto-optical Kerr effect (MOKE) technique. Measured hysteresis loops obtained from the MOKE part are used for investigation of sample surface magnetic properties. The CEMS part of such a system is suitable for studying the spatial spin distribution during magnetization reversal under applied magnetic field, whose values are established from the measured MOKE loop. The combined technique is demonstrated on the results obtained at 300 K on an exchange-coupled ferrimagnetic amorphous GdFe/TbFe bilayer, where the center of the GdFe layer is enriched in {sup 57}Fe. Both techniques confirm in-plane uniaxial anisotropy. The spin structure at the position of the probe layer is analyzed for several values of the external magnetic field applied in the hard magnetization axis direction.

36 MATERIALS SCIENCE↗

Vector potential and surface magnetic field in magnetoelectric antiferromagnetic materials

A general formula for the average vector potential of bulk periodic systems is proposed and shown to set the boundary conditions at magnetic interfaces. Here, for antiferromagnetic materials, the study reveals a unique relation between the macroscopic potential and the orientation-dependent magnetic quadrupole as a result of the different crystalline and magnetic symmetries. In particular, at surfaces and interfaces of a truncated bulk without inversion and time-reversal symmetries, the average vector potential exhibits a discontinuity which results in an interfacial magnetic field. In general, however, due to the surface and interface electronic and atomic relaxations, additional magnetization may result. For the experimentally observed magnetoelectric antiferromagnets, in particular, our symmetry analysis suggests that the relaxation effects could well be a system response to the presence of such a potential discontinuity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effective decolorization and adsorption of contaminant from industrial dye effluents using spherical surfaced magnetic (Fe{sub 3}O{sub 4}) nanoparticles

Treatment of highly concentrated Industrial dye stuff effluents released in the environment is the major issue faced in the era of waste management as well as in water pollution. Though there is availability of conventional techniques in large numbers, there is a need of efficient and effective advance technologies. In account of that, Nanotechnology plays a prominent role to treat the heavy metals, organic and inorganic contaminants using smart materials in nano regime (1 -100 nm). Among these nanomaterials like Iron Oxide (Fe{sub 3}O{sub 4}, magnetic nanoparticle) is one of the most promising candidates to remove the heavy metals from the industrial effluent. Fe{sub 3}O{sub 4} is the widely used smart material with magnetic property having high surface area; high surface to volume ratio provides more surface for the chemical reaction for the surface adsorption. Fe{sub 3}O{sub 4} nanoparticles have been synthesized using sonochemical method using ultra frequency in aqueous solution under optimized conditions. The as-synthesized nanoparticle was analyzed using different characterization tool. The Transmission Electron microscope (TEM) images revealed 10-12 nm spherical shape nanoparticles; crystal phase and surface morphology was confirmed by X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM), respectively. The functional group were identified by Fourier Transform-Infra Red Spectroscopy (FT-IR), revealed the bending and stretching vibrations associated with Iron Oxide nanoparticle. In present study, for the efficient removal of contaminants, different concentration (10-50 ppm) of dye stuff effluent has been prepared and subjected to adsorption and decolourization at definite time intervals with Fe{sub 3}O{sub 4} nanoparticles. The concentration of Iron oxide and the time (45 mins) was kept fixed for the reaction whereas the concentration of dye stuff effluent was kept varying. It was found that the spherical shaped Fe{sub 3}O{sub 4} proved to be the potential material for the adsorption of corresponding contaminants due to its highly active adsorbing surfaces. The result concluded that the effective adsorption and decolourization of contaminants is observed in different concentration with the maximum time period of 45 mins with the optimized concentration of Fe{sub 3}O{sub 4}.

54 ENVIRONMENTAL SCIENCES↗

Thermal equilibrium of pure electron plasmas across a central region of magnetic surfaces

Measurements of the equilibria of plasmas created by emission from a biased filament located off the magnetic axis in the Columbia Non-neutral Torus (CNT) [T. S. Pedersen, J. P. Kremer, R. G. Lefrancois et al., Fusion Sci. Technol. 50, 372 (2006)] show that such plasmas have equilibrium properties consistent with the inner surfaces being in a state of cross-surface thermal equilibrium. Numerical solutions to the equilibrium equation were used to fit the experimental data and demonstrate consistency with cross-surface thermal equilibrium. Previous experiments in CNT showed that constant temperatures across magnetic surfaces are characteristic of CNT plasmas, implying thermal confinement times much less than particle confinement times. These results show that when emitting off axis there is a volume of inner surfaces where diffusion into that region is balanced by outward transport, producing a Boltzmann distribution of electrons. When combined with the low thermal energy confinement time this is a cross-surface thermal equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of adatom deposition on surface magnetism and exchange coupling parameter in (0001) SmCo{sub 5} slabs

First principles calculations are performed on 3d-transition metal atom deposited (0001) surface of SmCo{sub 5} to understand the magnetic properties and the improvement of Curie temperature (T{sub c}). Various atomic sites are examined to identify the energetically feasible adsorption of adatom and it is found that the void site of Co-rich (0001) SmCo{sub 5} surface is the most favourable one to deposit. The surface magnetic moments of various adatom deposited SmCo{sub 5} surfaces are larger than the clean surface except for Cu and Zn. Eventually, the surface exchange coupling of clean and adatom deposited surface is found to increase for Mn, Fe, Co, Ni, and Cu deposited surfaces and this improvement results in the increase in T{sub c} of SmCo{sub 5} slab.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pressure-induced metallization and loss of surface magnetism in FeSi

Single-crystalline FeSi samples with a conducting surface state were studied under high pressure and magnetic field by means of electrical resistance measurements to explore how the bulk semiconducting state and the surface state are tuned by the application of pressure. Here, we found that the energy gap associated with the semiconducting bulk phase begins to close abruptly at a critical pressure of ~10 GPa and the bulk material becomes metallic with no obvious sign of any emergent phases or non-Fermi liquid behavior in temperature dependent electrical resistance in the neighborhood of the critical pressure above 3 K. Moreover, the metallic phase appears to remain at near-ambient pressure upon release of the pressure. Interestingly, the hysteresis in the electrical resistance vs magnetic field curve associated with the magnetically ordered conducting surface state decreases with pressure and vanishes at the critical pressure, while the slope of the electrical resistance vs magnetic field curve, which has a negative value for pressure below the critical pressure, decreases in magnitude with pressure and changes sign at the critical pressure. Thus the conducting surface state and the corresponding two-dimensional magnetic order collapse at the critical pressure where the energy gap of the bulk material starts to close abruptly, revealing the connection between the conducting surface state and the semiconducting bulk state in FeSi.

36 MATERIALS SCIENCE↗

Possible surface magnetism in the topological Kondo insulator candidate FeSi

Our group has previously reported the existence of a conducting surface state (CSS) in FeSi, a candidate for a d-electron topological Kondo insulator (TKI), at low temperature. In this paper, we present the electrical transport properties of single crystals of FeSi studied in the phase space of temperature (T), magnetic field (B), and the angle (θ) between the electrical current and B. The normalized T-dependent electrical resistance (R) of a successively thinned FeSi crystal provides further confirmation of the existence of a CSS. We report that, in the CSS, the magnetoresistance (MR) exhibits a hysteresis loop bounded within ±0.5 T, suggesting two-dimensional magnetic ordering. The hysteretic MR is asymmetric in B and anisotropic with respect to θ. Further exploration of R(θ) at a fixed field of 9 T reveals an initial progressive rotation of the axis for twofold rotational symmetry from 2 to 10 K, then a stabilized axis for twofold symmetry until, at T > 40 K, the anisotropy vanishes, coincident with the disappearance of the CSS. Furthermore, these observations point to a possible magnetically ordered surface state that has been reported in similar systems such as FeSi nanofilms and bulk SmB 6 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Model for dynamic self-assembled magnetic surface structures.

We propose a first-principles model for the dynamic self-assembly of magnetic structures at a water-air interface reported in earlier experiments. The model is based on the Navier-Stokes equation for liquids in shallow water approximation coupled to Newton equations for interacting magnetic particles suspended at a water-air interface. The model reproduces most of the observed phenomenology, including spontaneous formation of magnetic snakelike structures, generation of large-scale vortex flows, complex ferromagnetic-antiferromagnetic ordering of the snake, and self-propulsion of bead-snake hybrids.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Choice of coordinates on a toroidal magnetic surface

Construction of global angular coordinates on an arbitrarily shaped toroidal surface is considered. It is shown that global orthogonal, isothermal, and semigeodesic geometric coordinates can always be introduced on a toroidal surface. Such coordinates can be rather efficient in solving problems of plasma equilibrium and stability in a magnetic field. At the same time, it is impossible to introduce global geodesic coordinates and coordinates based on curvature lines. It is proposed to use a magnetic analogy to search for transformations of global angular geometric coordinates that simplify the expression for the length element on an arbitrary toroidal surface. An algorithm for the computation of such coordinates is offered. With this approach, a 'virtual' magnetic field such that its force lines, as well as the lines orthogonal to them, are closed is searched for on the toroidal surface. These lines comprise a geometric coordinate grid on an actual magnetic surface formed by the actual magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Outward electron orbit extending to inward part of closed helical magnetic surfaces surrounded by shifted negative space potential

Outward electron orbits that extend to the inward part of a closed helical vacuum magnetic region are found in three-dimensional calculations, which take into account two experimental findings. The pitch angle of electrons in the stochastic magnetic region (SMR) is scattered considerably due to the presence of a shifted self-space potential phi{sub s}. Eventually, the electron becomes a helically trapped particle, and starts an inward movement along one of the |B{sub min}| contours. Once penetrating into the helical magnetic region, the electron is never lost to the chamber wall, because the negative phi{sub s} in the SMR acts as a potential barrier.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of magnetic drift tangential to magnetic surfaces on neoclassical transport in non-axisymmetric plasmas

In evaluating neoclassical transport by radially local simulations, the magnetic drift tangential to a flux surface is usually ignored in order to keep the phase-space volume conservation. In this paper, effect of the tangential magnetic drift on the local neoclassical transport is investigated. To retain the effect of the tangential magnetic drift in the local treatment of neoclassical transport, a new local formulation for the drift kinetic simulation is developed. The compressibility of the phase-space volume caused by the tangential magnetic drift is regarded as a source term for the drift kinetic equation, which is solved by using a two-weight δf Monte Carlo method for non-Hamiltonian system [G. Hu and J. A. Krommes, Phys. Plasmas 1, 863 (1994)]. It is demonstrated that the effect of the drift is negligible for the neoclassical transport in tokamaks. In non-axisymmetric systems, however, the tangential magnetic drift substantially changes the dependence of the neoclassical transport on the radial electric field E{sub r}. The peaked behavior of the neoclassical radial fluxes around E{sub r }={sub }0 observed in conventional local neoclassical transport simulations is removed by taking the tangential magnetic drift into account.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Surface magnetism and proximity effects in hexaboride thin films

Here, the unexpected ferromagnetism in alkaline hexaborides has attracted extensive research efforts. The exceptionally high Curie temperature sustained by very low density of magnetic moments is yet to be clearly understood. Here, we report the magnetic properties studied in CaB 6 and SrB 6 thin films and their heterostructures with SmB 6 grown by pulsed laser deposition. A coexistence of ferromagnetic and superparamagnetic orders with 2D-type magnetic anisotropy was observed in CaB 6 and SrB 6 . Boron deficiency and closely correlated local oxidization were found at the film surface that contacts air and its interface with the oxide substrate. These results suggest that the magnetism observed is likely generated by two thin surface/interface layers with high concentration of boron vacancies which are energetically stabled by oxygen cation. Additionally, clear suppression of the superconductivity proximity effect in SmB 6 film was observed when SmB 6 was grown on top of the magnetic CaB 6 . Such results demonstrate the interesting perspective of engineering multifunctional heterostructures by coupling the surface magnetic layer with the diversity of other hexaboride materials.

36 MATERIALS SCIENCE↗

Superconductivity Behavior in Epitaxial TiN Films Points to Surface Magnetic Disorder

In this work we analyze the evolution of the normal and superconducting properties of epitaxial TiN films, characterized by high Ioffe-Regel parameter values, as a function of the film thickness. As the film thickness decreases, we observe an increase of the residual resistivity, that becomes dominated by diffusive surface scattering for d ≤ 20 nm . At the same time, a substantial thickness-dependent reduction of the superconducting critical temperature is observed compared to the bulk TiN value. In such high-quality material films, this effect can be explained by a weak magnetic disorder residing in the surface layer with a characteristic magnetic defect density of approximately 10 12 cm –2 . Our results suggest that surface magnetic disorder is generally present in oxidized TiN films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Adsorption-Induced Surface Magnetism

We report the emergence of adsorption-induced magnetism from heterohelicene molecules on a nonmagnetic Cu(100) surface. Spin-polarized low-energy electron microscopy measurements reveal spin-dependent electron reflectivity for enantiopure 7,12,17-trioxa[11]helicene (TO[11]H) monolayers, indicating the formation of a spin-polarized state localized in the topmost copper layer. Control experiments on clean Cu(100) and TO[11]H on highly oriented pyrolytic graphite show no such effect, excluding artifacts and chirality-induced spin selectivity as origins. Spin-polarized density functional theory calculations with hybrid functionals attribute the magnetism to strong chemisorption, which induces hybridization between the molecular HOMO and copper s- and d-states, driving asymmetric spin-polarized charge redistribution at the interface. An extended Newns-Anderson-Grimley model incorporating on-site Coulomb repulsion in Cu d-orbitals reproduces the emergence of interfacial spin polarization above a threshold interaction strength, highlighting the key roles of hybridization parameters and Coulomb correlation. These findings reveal a mechanism for inducing magnetism at molecule-metal interfaces without inherently magnetic components, offering avenues for engineering spin-polarized states in organic-inorganic hybrid systems.

Hubbard model↗

Surface magnetic anisotropy-mediated spin Hall magnetoresistance and spin Seebeck effects in a YIG/Pt heterostructure

The role of magnon-phonon coupling in the low-temperature behavior of the spin Seebeck effect (SSE) in YIG/Pt has been puzzling for more than a decade. Here, to elucidate the origin of the anomalous peak around 80 K, we investigate the temperature evolution of SSE, spin Hall magnetoresistance (SMR), and magnetic anisotropy in the same YIG/Pt heterostructure. We find that these effects, along with magnetic damping, show the peaks at the same temperature (~80 K). This simultaneous occurrence, where no heat is applied in the case of SMR, rules out the phonon-magnon drag related origin of SSE in the YIG/Pt system. We further show that the intrinsic surface anisotropy behavior in YIG is responsible for controlling the SSE, SMR, and magnetic damping in the YIG/Pt structure. Our findings not only help to understand these effects fundamentally but also provide an effective way for improving them by manipulating the surface magnetic anisotropy for spin caloritronic applications.

36 MATERIALS SCIENCE↗

Optimizing a low-energy electron diffraction spin-polarization analyzer for imaging of magnetic surface structures

A newly designed scanning electron microscope with polarization analysis (SEMPA or spin-SEM) for the acquisition of magnetic images is presented. Core component is the spin detector, based on the scattering of low-energy electrons at a W(100) surface in ultrahigh vacuum. The instrument has been optimized with respect to ease of handling and efficiency. The operation and performance of a general low-energy electron diffraction (LEED) detector for SEMPA have been modeled in order to find the optimum operating parameters and to predict the obtainable image asymmetry. Based on the energy dependence of the secondary electron polarization and intensity, the detector output is simulated. For our instrument with optimized performance we demonstrate experimentally 8.6% polarization asymmetry in the domain structure of an iron whisker. This corresponds to 17.2% image contrast, in excellent agreement with the predicted simulated value. A contrast to noise ratio of 27 is achieved at 5 ms acquisition time per pixel.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The transport characteristics of passing fast ions produced by nonlocal overlapping of drift island surfaces and magnetic island surfaces

The structure of the drift-island surface of passing fast ions (PFIs) is investigated in the presence of the resonant interaction with a magnetic island. Two overlapping regions of the drift-island surface and the magnetic island surface are found, one corresponding to local overlapping region and the other to non-local one. Here, the word “nonlocal” denotes that the resonances in the core plasma can have effects on the PFIs near the plasma boundary, while the “local” represents that the PFIs just near the resonant location are influenced. The nonlocal overlapping constructs a transport path along which the PFIs can become losses. There are three kinds of drift-island surfaces to join in forming the transport paths. A pitch angle region, which is called pitch angle gap, is found near the plasma boundary, where the drift-island surface cannot be formed and few PFIs are lost. The pitch-angle selective features of PFI losses are obtained by analyzing the three kinds of drift-island surfaces. The coupling between the crowd drift island surfaces and the collision can induce the prompt losses of PFIs and rapidly slowing down of PFI energy. The time of the prompt losses and the slowing down rate are calculated. Qualitatively, the theoretical results are in well agreement with the experimental observations in ASDEX Upgrade [M. García-Muñoz et al., Nucl. Fusion 47, L10 (2007)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗