Search NASA⌕ Search

SEARCH · Search NASA

Results for “MEDLI2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

3D Material Response of the MSL Heatshield Using NuSil-Coated PICA

The Mars Science Laboratory (MSL) Entry, Descent and Landing Instrumentation (MEDLI) collected in-flight data largely used by the ablation community to verify and validate physics-based models for the response of the Phenolic Impregnated Carbon Ablator (PICA) material [1-4]. MEDLI data were recently used to guide the development of NASA’s high-fidelity material response models for PICA implemented in the Porous material Analysis Toolbox based on OpenFOAM (PATO) software [5-6]. A follow-up instrumentation suite, MEDLI2, was used for the Mars 2020 mission [7] after the large scientific impact of MEDLI. Recent analyses performed as part of MEDLI2 development drew the attention to significant effects of a protective coating to the aerothermal response of PICA. NuSil, a silicone-based overcoat sprayed onto the MSL heatshield, including the MEDLI plugs, as contamination control, is currently neglected in PICA ablation models. To mitigate the spread of phenolic dust from PICA, NuSil was applied to the entire MSL and Mars 2020 heatshields, including the MEDLI and MEDLI2 plugs. Ground testing of PICA-NuSil (PICA-N) models exhibited surface temperature jumps due to oxide scale formation and subsequent NuSil burn- off. It is therefore critical to include a model for the aerothermal response of the coating in ongoing code development and validation efforts. Figure 1 illustrates the PICA-N model implemented in PATO with a test case that shows a temperature jump and a change of recession rate at the wall after 20 seconds of simulation when the NuSil coating was fully removed.

Aerospace↗
NASA NTRS2019

Charactarization of Thermal Protection Systems

In 2012, NASA's mission of landing the Mars Science Laboratory (MSL) on Mars was successful. MSL was protected by an ablative heatshield of tiled low density material known as PICA (phenolic impregnated carbon ablator). The heatshield was instrumented with MEDLI (MSL Entry Descent Landing Instrument) a suite of sensors & thermocouples at discrete locations in order to monitor the in-depth ablator temperature response and surface pressure. MEDLI was designed and developed by NASA Langley, in partnership with NASA Ames Research Center for the purposes of probing Mars and evaluating the performance of the spacecraft upon entry into the Martian atmosphere. The flight data reduces the uncertainty in engineer models for predicting the response of a spacecraft towards the extreme heating environment of an entry into the Martian atmosphere. MEDLI2 is a part of the Mars 2020 mission and is the next-generation sensor suite for entry, descent, and landing. This data will again help engineers validate their flight models. Additionally, the atmospheric data, can help us understand atmospheric density and winds. This is a critical study for reducing risks to both robotic and future human missions to Mars. Engineered models for Mars 2020 are dependent upon parameters related to the materials response to heating and radiation. In this work, the thermal properties and other measurements of various ablative materials are analyzed to achieve greater utility of the 2012 MEDLI flight data and more accurately determine the parameters being used in Mars 2020. The purpose of this study was to measure specific heat, thermal conductivity, char yield, reflectance as a function of wavelength, and other thermal parameters and optical properties of various ablative materials. CO2(g) at extreme temperatures emits radiation impacting MEDLI2 flight predictions. Emissivity & absorptivity as a function of temperature were calculated from FTIR and UV-Vis data as a means of investigating whether these materials might absorb CO2 radiation upon entry into the Mars atmosphere.

HEEET↗
NASA NTRS2017

Mars Science Laboratory Heatshield Flight Data Analysis

NASA Mars Science Laboratory (MSL), which landed the Curiosity rover on the surface of Mars on August 5th, 2012, was the largest and heaviest Mars entry vehicle representing a significant advancement in planetary entry, descent and landing capability. Hypersonic flight performance data was collected using MSLs on-board sensors called Mars Entry, Descent and Landing Instrumentation (MEDLI). This talk will give an overview of MSL entry and a description of MEDLI sensors. Observations from flight data will be examined followed by a discussion of analysis efforts to reconstruct surface heating from heatshields in-depth temperature measurements. Finally, a brief overview of MEDLI2 instrumentation, which will fly on NASAs Mars2020 mission, will be presented with a discussion on how lessons learned from MEDLI data affected the design of MEDLI2 instrumentation.

Mars↗
NASA NTRS2019

Progress Towards Modeling the Ablation Response of NuSil-Coated PICA

The Mars Science Laboratory (MSL) Entry, Descent and Landing Instrumentation (MEDLI) collected in-flight data largely used by the ablation community to verify and validate physics-based models for the response of the Phenolic Impregnated Carbon Ablator (PICA) material [1-4]. MEDLI data were recently used to guide the development of NASA’s high-fidelity material response models for PICA, implemented in the Porous material Analysis Toolbox based on OpenFOAM (PATO) software [5-6]. A follow-up instrumentation suite, MEDLI2, is planned for the upcoming Mars 2020 mission [7] after the large scientific impact of MEDLI. Recent analyses performed as part of MEDLI2 development draw the attention to significant effects of a protective coating to the aerothermal response of PICA. NuSil, a silicone-based overcoat sprayed onto the MSL heatshield as contamination control, is currently neglected in PICA ablation models. To mitigate the spread of phenolic dust from PICA, NuSil was applied to the entire MSL heatshield, including the MEDLI plugs. NuSil is a space grade designation of the siloxane copolymer, primarily used to protect against atomic oxygen erosion in the Low Earth Orbit environment. Ground testing of PICA-NuSil (PICA-N) models all exhibited surface temperature jumps of the order of 200 K due to oxide scale formation and subsequent NuSil burn-off. It is therefore critical to include a model for the aerothermal response of the coating in ongoing code development and validation efforts.

Meurisse, Jeremie B.↗
NASA NTRSDate not supplied

Atmospheric Entry Heat Flux Sensor Calibration and Flight Data Analysis

- Recent NASA missions have included total heat flux sensors (THFS) embedded in the thermal protection system (TPS) to measure the combined convective and radiative heating during atmospheric entry. These measurements are key to fundamental entry science and mission design. - The THFSs for the Mars Entry, Descent, and Landing Instrumentation 2 (MEDLI2) sensor suite on the Mars 2020 entry vehicle and the Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) technology demonstration mission were passively cooled Schmidt–Boelter gauges. - As presented at IPPW 2021, THFS calibration is notoriously difficult and includes several sources of measurement uncertainty [1]. - Recent work has been conducted to understand and quantify the measurement uncertainty in the MEDLI2 and LOFTID Schmidt-Boelter THFSs.

R. A. Miller↗
NASA NTRS2015

Entry Descent and Landing Workshop Proceedings: Cost Drivers - Volume 1

Provide some perspective on characteristics or features which drive the cost of the EDL Instrumentation. Using MEDLI, MEDLI2, EFT1, and Ares I-X as case studies. Need to consider what program is funding the effort and how that program likes to manage projects. Need to define the limits of the measurement subsystem - what is being provided and implemented - and by whom. The yearly end of fiscal year drama will always introduce uncertainty which will impact the cost - and cost phasing.

Wright, Henry↗
NASA NTRS2015

Entry Descent and Landing Workshop Proceedings: EDL Instrumentation Workshop Background and Motivation - Volume 1

Objective: Scope out a low-cost instrumentation effort for Discovery and/or New Frontiers-class missions, including acquisition strategy, for FY17-19 (TBR). This is intended to be a new Game-Changing project. MEDLI and MEDLI2 cost $25-$30M each. These costs are not sustainable. Solutions are too massive and large for small planetary missions. Share various perspectives and previous experiences; discuss costs. Establish the future mission needs and measurement/sensor priorities. Determine the best acquisition and phasing approach.

Munk, Michelle M.↗
NASA NTRS2018

Characterization of a Radiometer Window for Mars Aftbody Heating Including Ablation Product Deposition Using a Miniature Arc Jet

The Mars Entry, Descent, and Landing Instrumentation 2 (MEDLI2) sensor suite for the Mars 2020 mission includes a radiometer on the backshell to measure the radiative heating during entry into the Martian atmosphere. Thermal Protection System (TPS) ablation products may be deposited on the radiometer window which would degrade the transmission and thus alter the accuracy of the radiometer readings. Testing in NASA Ames Research Center's miniature arc jet (mARC) facility was conducted to deposit TPS ablation products on radiometer windows in an effort to characterize how the ablation products change the window transmission and thus alter radiometer performance. Heat flux and stagnation pressure characterization of the mARC facility in a 90 percent CO2, 10 percent N2 (by mass) Mars-like environment are presented. The spectral transmission of the radiometer windows before and after mARC testing are compared. Additionally, a discussion of how flight-like these test conditions were and future work to further characterize the effect of TPS ablation on radiometer performance are presented.

Miller, Ruth A.↗
NASA NTRS2019

Progress Towards Modeling the Mars Science Laboratory PICA-NuSil Heatshield

The data collected by the Mars Science Laboratory (MSL) Entry, Descent and Landing Instrumentation, MEDLI, have become an established reference to assess the performance of engineering models of the Phenolic Impregnated Carbon Ablator (PICA) and to validate hypersonic computational fluid dynamics (CFD) tools for entry systems. MEDLI measurements are also extensively used as validation reference for current developments of high-fidelity material response models for PICA. So large has been the scientific output and impact of MEDLI that a follow-up instrumentation suite MEDLI2 is underway for the upcoming Mars 2020 mission.A feature neglected thus far in the modeling of the MSL heatshield, is the presence of a silicone-based room temperature vulcanizing coating designated NuSil CV-1144-0. NuSil was used to coat the entire MSL heatshield, including the MEDLI plugs, to mitigate the spread of phenolic dust from PICA, and limit contamination during clean room operations. NuSil CV-1144-0 is a space grade siloxane copolymer, designed as an oxygen protection barrier for extreme low temperature environment.Assessments conducted during MSL development demonstrated that the presence of NuSil had no adverse effect on the performance of PICA. However, evidence from ground testing of PICA-NuSil (PICA-N) models in the HyMETS arc-jet test facility suggests that the silicone changes the high temperature response of PICA. It is therefore critical to assess the importance of modeling the coating in ongoing code validation efforts.

Bessire, Brody K.↗
NASA NTRS2019

Characterization of Thermal Protection Systems: An Analysis of Optical & Thermal Properties

Thermal Protection System Materials & thermal control coatings were characterized by a variety of methodologies including heat flow meter method (HFM), dynamic scanning calorimetry (DSC), fourier transform infrared spectroscopy (FTIR), and Ultra-Violet & Visible light spectroscopy (UV-VIS). Physical properties were measured to aid in the construction of thermal response models for a number a projects including MEDLI and MEDLI2. Comparing pre-flight predictions with actual flight data can allow for a reduction of margins and improve designs. The models enable design of TPS for flight missions and analysis of flight data to understand aerothermal environments experienced on the mission. This presentation reveals critical information: heat capacity (cp vs T), thermal conductivity ( vs T), and emissivity (E vs T) for Super Lightweight Ablative (SLA), Phenolic Impregnated Carbon Ablative (PICA-D), & Heatshield for Extreme Entry Environment Technology (HEEET). These properties were also measured for various thermal control coatings manufactured by AZ Technology. A portion of this work is incomplete and highlights questions to investigate in the future.

Cole, Brian↗
NASA NTRSDate not supplied

Revisiting MEDLI with Improved Modeling and Simulation Tools

The thermal protection system (TPS) of the Mars 2020 capsule will carry a suite of sensors called MEDLI2 (Mars Entry, Descent, and Landing Instrument 2). This suite consists of pressure sensors/transducers and thermocouple plugs meant to measure atmospheric properties, vehicle attitude, TPS performance, etc. While the suite is similar to that carried on the successful MSL (Mars Science Laboratory) mission in 2012, it now includes pressure sensors, thermocouple plugs, and radiometers on the backshell as well. An analysis plan is therefore necessary to help with the interpretation of flight measurements.

Atmospheric Entry↗
NASA NTRSDate not supplied

Ablation Product Deposition Testing

End-of-summer intern presentation on work performed in support of MEDLI2's Ablation Product Deposition Testing in the Ames Panel Test Facility.

Kristen Price↗
NASA NTRSDate not supplied

Updates on the Predictive Materials Modeling Software Tools

Updates on NASA‘s efforts to build a Predictive Material Modeling (PMM) framework from the micro-scale to the macro-scale are presented in this abstract. The PMM effort is part of the Entry Systems Modeling (ESM) project under NASA’s Game Changing Development (GCD) program. To reduce the need for extensive testing and accelerate the design cycle process, ESM is developing simulation and modeling tools that enable the characterization of the properties of thermal protection materials and their response to extremely hot plasma. The Porous Microstructure Analysis (PuMA) software has been developed to compute effective material properties and perform material response simulations on digitized microstructures of porous media. PuMA is able to import three-dimensional digital images obtained from X-ray microtomography or to generate artificial microstructures that mimic real materials. PuMA also provides a module for interactive 3D visualizations. Version 3, which was recently released as open-source, includes modules to compute simple morphological properties such as porosity, volume fractions, pore diameter, and specific surface area. Additional capabilities include the determination of effective thermal and electrical conductivity (both radiative and solid conduction - including the ability to simulate local anisotropy for the latter); effective diffusivity and tortuosity from the continuum to the rarefied regime; techniques to determine the local material orientation, as well as mechanical properties (elasticity coefficients), and permeability. Computed properties are then used to inform a macro-scale material response model, such as those implemented in the Porous material Analysis Toolbox based on OpenFOAM (PATO) software developed within ESM. The computational model in PATO is a generic heat and mass transfer model for porous reactive materials containing several solid phases and a single gas phase. The detailed chemical interactions occurring between the solid phases and the gas phase are modeled at the pore scale, assuming Local Thermal Equilibrium. Recent efforts include the development of a mechanical erosion model as well as a unified model allowing an intrinsic coupling between fluid and material. Comparison to flight data (Mars Science Laboratory [MSL] Entry Descent and Landing Instrument [MEDLI] and Mars 2020 MEDLI2) is critical in order to validate these computational tools. Examples of ablative material response using the code will be presented, including 3D simulations of the full-scale heatshield of the MSL capsule. The simulations demonstrated the ability of the modern material response code, PATO, to handle the material response of geometrically complex and large domains through the use of massively parallel computations.

material modeling↗
NASA NTRSDate not supplied

Effect of anisotropic mesh adaptation on surface pressure predictions for atmospheric entry simulations.

Recently, a metric-based mesh adaptation capability has been developed for the advanced compressible flow solver US3D. Metric-based mesh adaptation is a solution informed mesh adaptation strategy that typically improves the resolution of the mesh along anisotropic flow features, like strong shock waves or shear layers. An anisotropic error indicator is reconstructed based on a provided Computational Fluid Dynamics (CFD) solution which prescribes the locally desired element size and orientation. The benefits of this mesh adaptation strategy is twofold: first, it simplifies the manual meshing labor that typically needs to be carried out by the CFD engineer because the mesh adaptation is informed by the provided solution. Second, the computational cost is kept to a minimum while improving the resolution of the simulation. The aim here is to demonstrate how anisotropic mesh adaptation can be employed to improve the predictions of surface pressure for atmospheric entry vehicles. In this work, we compare CFD simulations that use this newly developed anisotropic mesh adaptation capability for US3D with pressure data that was collected by Mars Entry, Descent, and Landing Instrumentation 2 (MEDLI2) during the atmospheric entry phase of Mars2020.

D. Ekelschot↗
NASA NTRSDate not supplied

Effect of Anisotropic Mesh Adaptation on Surface Pressure Predictions for Atmospheric Entry Simulations

A metric-based mesh adaptation capability has been developed for the advanced compressible flow solver US3D. Metric-based mesh adaptation is a solution informed mesh adaptation strategy that improves the resolution of the mesh along anisotropic flow features, like strong shock waves or shear layers. An anisotropic error indicator is reconstructed based on a provided Computational Fluid Dynamics (CFD) solution which prescribes the locally desired element size and orientation. The benefits of this mesh adaptation strategy is twofold: first, it simplifies the manual meshing labor that typically needs to be carried out by the CFD engineer because the mesh adaptation is informed by the provided solution. Second, the computational cost is kept to a minimum while improving the resolution of the simulation. The aim here is to demonstrate how anisotropic mesh adaptation can be employed to improve the predictions of surface pressure for atmospheric entry vehicles. In this work, we compare CFD simulations that use this newly developed anisotropic mesh adaptation capability for US3D with pressure data that was collected by Mars Entry, Descent, and Landing Instrumentation (MEDLI2) suite.

Dirk Ekelschot↗
NASA NTRSDate not supplied

New Developments In NASA’s Entry Systems Modeling Project

This paper describes recent developments for modeling entry, descent, and landing (EDL)of spacecraft in support of NASA’s exploration missions. Mission-specific research and model development for entry systems occurs across the Agency (e.g., within flight programs like Artemis/Orion and Mars Sample Return), however the aim of this paper is to discuss the research conducted by NASA’s Entry Systems Modeling (ESM) Project, which serves as the Agency’s only effort dedicated to advancing modeling capabilities that cross-cut multiple technical disciplines, missions and destinations. The ESM portfolio is developed to address the specific needs expressed by a cross-section of NASA stakeholders, including flight and research projects, technical leadership, and subject matter experts. Technology development in ESM is organized and prioritized from a system-level perspective, resulting in four broad technical areas of investment: (1) Thermal Protection System (TPS) material modeling, (2) Shock layer kinetics and radiation, (3) Aerosciences, and (4) Guidance, navigation, and control. In addition to the core technical areas, special topics are rolled into the project portfolio as specific demands arise. Current special topics include TPS Certification by Analysis, improving understanding of woven TPS material performance; Hypersonic Wake Flows, assessing and improving predictions of base flows; and the MEDLI2 Deep Dive, furthering analysis of data obtained during Mars2020 mission’s entry and descent at Mars. Key results from each of these areas are presented in this paper, along with associated references to serve as a roadmap for other EDL researchers to access NASA’s publications.

Aaron M Brandis↗
NASA NTRSDate not supplied

Aerothermal Analysis and Thermal Protection System Design of the Mars Sample Retrieval Lander [SRL].

Mars Sample Retrieval Lander, part of the Mars Sample Return (MSR) mission, is being designed to land the heaviest payload yet, to the surface of Mars. SRL is being designed to carry the Lander, Sample Transfer System, Mars Acent Vehicle, and two Sample Recovery Helicopters. Compared to MSL and Mars 2020, SRL has a significantly higher ballistic coefficient, and flies at a higher lift/drag configuration. While the SRL heatshield is very similar to that of MSL and M2020, the backshell is very different, so as to accommode the payload. SRL is shielded by the same TPS materials as MSL and Mars 2020, with changes to design reflecting the SRL configuration and ConOPS. The aerothermal analysis and TPS design methodology of SRL relies on the successes of MSL and Mars 2020, and the lessons learned from MEDLI and MEDLI2. However, the constraints on mass require us to revisit all of our prediction models and analysis assumptions, in an attempt to reduce conservatism and TPS mass. MSL and Mars 2020 reconstruction, and detailed comparisons against MEDLI/MEDLI2 data are being used to justify our analysis approach and refine uncertainties and margins.

Mars↗
NASA NTRSDate not supplied

Aerothermal Analysis and Environment Predictions for the Mars Sample Retrieval Lander (SRL)

Mars Sample Retrieval Lander (SRL) is the next mission to Mars, and an integral part of the proposed Mars Sample Return (MSR) Program. Aerothermal Analysis of the SRL capsule takes advantage of the design and analysis of the Mars Science Laboratory and the Mars 2020 missions, findings from the MEDLI and MEDLI2 heatshield instrumentation campaigns, and developments in predictive capabilities over the last 20 years. In particular, SRL is being designed to enter the Mars atmosphere at velocities as high as 8 km/s, which would be the highest for a Mars entry, and is expected to encounter additional shock layer radiation physics compared to previous missions to Mars. This paper presents the status of analysis including the overall methodology, models and assumptions of the aerothermal environment predictions, with a focus on differences from the approaches and modeling used for Mars 2020 and MSL.

Mars↗