Search NASA⌕ Search

SEARCH · Search NASA

Results for “MICROALGAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Development of integrated screening, cultivar optimization, and verification research (DISCOVR): A coordinated research-driven approach to improve microalgal productivity, composition, and culture stability for commercially viable biofuels production

To address major knowledge gaps and barriers to the commercial development of algal biomass for biofuels and co-products, a collaborative consortium, Development of Integrated Screening, Cultivar Optimization, and Verification Research (DISCOVR), was established in 2016. Funded by the U.S. Department of Energy (DOE) Bioenergy Technologies Office (BETO), this consortium constitutes a partnership between four DOE national laboratories - Pacific Northwest National Laboratory (PNNL), Los Alamos National Laboratory (LANL), the National Renewable Energy Laboratory (NREL), and Sandia National Laboratories (SNL) - and the Arizona Center for Algae Technology and Innovation (AzCATI) at Arizona State University. To address the barriers of strain selection for achieving high seasonal productivities with a suitable composition and culture resilience, a tiered strain down-selection pipeline is implemented. At Tier I, the temperature and salinity tolerance of strains is determined in flask cultures; at Tier II, the areal biomass productivity and composition is determined in climate-simulation photobioreactors; at Tier III, the productivity and culture stability are determined in outdoor raceways. The top performing strains move forward to long-term testing at the algae testbed site at AzCATI to generate annual biomass productivity data. Concurrent to the strain down-selection in the DISCOVR pipeline, hypotheses for increasing biomass productivity, shifting biomass composition to enhance intrinsic value, and improving culture stability and resistance to pests are also tested. Techno-economic analyses are carried out to determine whether promising findings from laboratory studies or proposed modifications in outdoor pond cultivation conditions translate into reductions in the minimum biomass selling price (MBSP). Notably, in the three years following the launch of DISCOVR, annual biomass productivity has increased from 11.7 to 17.6 g m -2 day -1 , resulting in an MBSP decrease from 824 to 611 $ ton -1 .

09 BIOMASS FUELS↗

Total Protein Content Determination of Microalgal Biomass by Elemental Nitrogen Analysis and a Dedicated Nitrogen-to-Protein Conversion Factor

Accurately determining protein content is important in the valorization of algal biomass in food, feed, and fuel markets, where these values are used for component balance calculations. Conversion of elemental nitrogen to protein is a well-accepted and widely practiced method, but depends on developing an applicable nitrogen-to-protein conversion factor. The methodology reported here covers the quantitative assessment of the total nitrogen content of algal biomass and a description of the methodology that underpins the accurate de novo calculation of a dedicated nitrogen-to-protein conversion factor.

09 BIOMASS FUELS↗

Accurate and Reliable Quantification of Total Microalgal Fuel Potential as Fatty Acid Methyl Esters by in situ Transesterfication

In the context of algal biofuels, lipids, or better aliphatic chains of the fatty acids, are perhaps the most important constituents of algal biomass. Accurate quantification of lipids and their respective fuel yield is crucial for comparison of algal strains and growth conditions and for process monitoring. As an alternative to traditional solvent-based lipid extraction procedures, we have developed a robust whole-biomass in situ transesterification procedure for quantification of algal lipids (as fatty acid methyl esters, FAMEs) that (a) can be carried out on a small scale (using 4-7 mg of biomass), (b) is applicable to a range of different species, (c) consists of a single-step reaction, (d) is robust over a range of different temperature and time combinations, and (e) tolerant to at least 50% water in the biomass. Unlike gravimetric lipid quantification, which can over- or underestimate the lipid content, whole biomass transesterification reflects the true potential fuel yield of algal biomass. We report here on the comparison of the yield of FAMEs by using different catalysts and catalyst combinations, with the acid catalyst HCl providing a consistently high level of conversion of fatty acids with a precision of 1.9% relative standard deviation. We investigate the influence of reaction time, temperature, and biomass water content on the measured FAME content and profile for 4 different samples of algae (replete and deplete Chlorella vulgaris, replete Phaeodactylum tricornutum, and replete Nannochloropsis sp.). We conclude by demonstrating a full mass balance closure of all fatty acids around a traditional lipid extraction process.

09 BIOMASS FUELS↗

Growth modeling to evaluate alternative cultivation strategies to enhance national microalgal biomass production

In this paper, we present a model-based assessment of alternative cultivation strategies on algal biomass production within the conterminous United States. Our assessment focuses on two basic cultivation strategies: 1) seasonal rotation of three representative freshwater algal strains that are well suited for warm weather, cold weather, and all-season diverse weather conditions, respectively; and 2) variation between three open pond water depths (15cm, 20cm, and 25cm). The enhanced Biomass Assessment Tool (BAT) is applied on a site-specific, hourly basis at 5,832 North American Land Data Assimilation System Phase 2 1/8° meteorological model grid cells over a 30-year period (1980-2009) to evaluate the operational strategies. Recognizing that resource management decisions may also consider scales beyond the individual site, we also conduct a regional assessment of focused on 7 representative climate zones in the conterminous United States. Results demonstrate that the spatial variability of algal productivity is largely affected by the strain-specific growth response to light and temperature that vary significantly by climate zone and latitude. Therefore, with a limited set of alternative cultivation strategies, the BAT identified the best performing combination of cultivation strategies on a site-specific basis that considerably enhances national annual biomass productivity. Specifically, the appropriate choice of seasonal strain rotation is able to significantly dampen climate-driven seasonal and spatial variability.

59 BASIC BIOLOGICAL SCIENCES↗

Computational modeling of microalgal biofilm growth in heterogeneous rotating algal biofilm reactors (RABRs) for wastewater treatment

Rotating algal biofilm reactors (RABRs) are innovative systems designed to cultivate microalgae biofilms efficiently. In this paper, we have developed a novel mathematical model to accurately capture the growth dynamics of algae biofilms within RABR. By considering the spatial heterogeneity of the RABR, we introduce a PDE-based model that addresses the spatial variations across the substratum, enabling a more accurate simulation of biofilm growth in RABRs. The photosynthesis process is modeled through reactive kinetics, driving the growth of the algae biofilm. To analyze the system's behavior, we employ finite difference numerical methods to solve the complex PDE model. We then conduct extensive numerical simulations to understand algae biofilm growth in the RABR environment under various operational factors and environmental conditions. One primary focus in these simulations is to investigate the impact of various harvesting strategies, harvesting frequencies, light intensity, and light exposure on the overall biomass productivity of the algae biofilm. The numerical results provide valuable insights into optimizing algae biofilm growth and designing harvesting techniques in RABR systems. Our proposed novel mathematical model provides an effective platform for the theoretical investigation and design of RABRs for wastewater treatment.

09 BIOMASS FUELS↗

Modeling microalgal growth in an airlift-driven raceway reactor

In previous proof-of-concept studies, feasibility of a new airlift-raceway configuration and its energetic advantage and improved CO2 utilization efficiency over the traditional raceways and photobioreactors have been documented. In the current study, a mathematical model for predicting biomass growth in the airlift-raceway reactor is presented, which includes supply and transfer of CO2 and the synergetic effects of light, CO2, nitrogen, and temperature. The model was calibrated and validated with data from prototype scale versions of the reactor on two test species: Nannochloropsis salina and Scenedesmus sp., cultivated under indoor and outdoor conditions. Predictions of biomass concentrations by the proposed model agreed well with the temporal trend of the experimental data, with r(2) ranging from 0.96 to 0.98, p<0.001. A sensitivity analysis of the 10 model parameters used in this study revealed that only three of them were significant, with sensitivity coefficients ranging from 0.08 to 0.13.

09 BIOMASS FUELS↗

Co-liquefaction of mixed culture microalgal strains under sub-critical water conditions

In this work, we report the co-liquefaction performance of unicellular, red alga Cyanidioschyzon merolae and Galdieria sulphuraria under sub-critical water conditions within a stainless-steel batch reactor under different temperatures (150–300 °C), residence time (15–60 min), and Cyanidioschyzon merolae to Galdieria sulphuraria mass loading (0–100%). Individual liquefaction of C. merolae and G. sulphuraria at 300 °C achieved maximum biocrude oil yield of 18.9 and 14.0%, respectively. The yield of biocrude oil increased to 25.5%, suggesting a positive synergistic effect during the co-liquefaction of 80–20 mass loading of C. merolae to G. sulphuraria . The biocrude oils were analyzed by FT-ICR MS which showed that co-liquefaction did not significantly affect the distribution of product compounds compared to individual oils. The co-liquefied biocrude and biochar have a higher-heating-value of 35.28 and 7.96 MJ/kg. Ultimate and proximate analysis were performed on algae biomass, biocrude and biochar.

59 BASIC BIOLOGICAL SCIENCES↗