Search NASA⌕ Search

SEARCH · Search NASA

Results for “MICROMETER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Level Indicator On A Tubular Inside Micrometer

Leveling helps to ensure accurate measurements. Attachment helpful because in some situations that involve measurement of large, tight-tolerance inside dimensions, inside micrometers not held level between contact point give inaccurate readings. User adjusts position and orientation of micrometer and verifies level by observing bubble in level indicator. Upon feeling correct drag between micrometer tips and workpiece, user confident that tool used correctly and accurate measurement obtained.

Malinzak, R. Michael↗

High Temperature Mechanical Behavior of Polycrystalline Alumina from Mixed Nanometer and Micrometer Powders

Sintered aluminum oxide materials were formed using commercial methods from mechanically mixed powders of nano-and micrometer alumina. The powders were consolidated at 1500 and 1600 C with 3.2 and 7.2 ksi applied stress in argon. The conventional micrometer sized powders failed to consolidate. While 100 percent nanometer-sized alumina and its mixture with the micrometer powders achieved less than 99 percent density. Preliminary high temperature creep behavior indicates no super-plastic strains. However high strains (less than 0.65 percent) were generated in the nanometer powder, due to cracks and linked voids initiated by cavitation.

Goldsby, Jon C.↗

Mid-infrared difference-frequency generation source pumped by 1.1-1.5 micrometer dual-wavelength fiber amplifier for trace-gas detection

Continuous-wave mid-infrared radiation near 3.5 micrometers is generated by difference-frequency mixing of the output of a compact 1.1-1.5 micrometer dual-wavelength fiber amplifier in periodically poled LiNbO3. The diode side-pumped amplifier is constructed with double-cladding Yb-doped fiber followed by single-mode Er/Yb codoped fiber. Output powers of as much as 11 microW at 3.4 micrometers are obtained, and spectroscopic detection of CH4 and H2CO is demonstrated. c 1998 Optical Society of America.

Non-NASA Center↗

SOFIA Observations of SN 2010jl: Another Non-Detection of the 9.7 Micrometer Silicate Dust Feature

We present photometric observations from the Stratospheric Observatory for Infrared Astronomy (SOFIA) at 11.1 micrometers of the Type IIn supernova (SN IIn) 2010jl. The SN is undetected by SOFIA, but the upper limits obtained, combined with new and archival detections from Spitzer at 3.6 and 4.5 micrometers, allow us to characterize the composition of the dust present. Dust in other SN IIn has been shown in previous works to reside in a circumstellar shell of material ejected by the progenitor system in the few millennia prior to explosion. Our model fits show that the dust in the system shows no evidence for the strong, ubiquitous 9.7 micrometer feature from silicate dust, suggesting the presence of carbonaceous grains. The observations are best fit with 0.01−0.05 solar mass of carbonaceous dust radiating at a temperature of approximately 550−620 degrees Kelvin. The dust composition may reveal clues concerning the nature of the progenitor system, which remains ambiguous for this subclass. Most of the single star progenitor systems proposed for SNe IIn, such as luminous blue variables, red supergiants, yellow hypergiants, and B[e] stars, all clearly show silicate dust in their pre-SN outflows. However, this post-SN result is consistent with the small sample of SNe IIn with mid-infrared observations, none of which show signs of emission from silicate dust in their infrared spectra.

SOFIA Observations of SN 2010jl↗

Statistical-band-model analysis and integrated intensity for the 21.8 micrometer bands of HNO3 vapor

A large number of low-resolution quantitative spectra were obtained for a band-model analysis of 21.8-micrometer bands. The experimental investigations were conducted with pure nitric-acid vapor at 40 C, taking into account pressures in the range from a few torr to a pressure which is close to the saturation pressure. It is pointed out that the obtained data, in addition to those from the 11.3-micrometer band, can be used for an independent determination of the nitric acid vertical distribution in the stratosphere.

Goldman, A.↗

Wideband 1.064 micrometer detector evaluation

The performance of several candidate detectors for use as communications detectors in a 400 Mbps 1.064 micrometers laser communication system was evaluated. The results of communication system Bit Error Rate (BER) testing for the best detector of each type are summarized. Complete testing data of each type detector is presented. The 400 Mbps 1.064 micrometers communication system receiver test bed is described. The best communication system results for each detector type are included. Performance comparisons are made at 0.000001 BER, the specification level chosen for satellite laser communication links. The data is presented in two groups. The first indicates the best performance levels that can be expected on normal space laser communication system operation. The second cites the best performance levels which can be achieved by focusing the signal to diffraction limited spots on the photosensitive area.

Green, S. I.↗

Non-thermal 10 micrometers CO2 emission lines in the atmospheres of Mars and Venus

Mechanisms for the excitation of strong 10 micrometer CO2 emission lines seen on Mars and Venus are examined. Line absorption of near IR solar flux directly by CO2 or by H2O with collisional transfer of energy to CO2 are proposed as likely excitation mechanisms. Altitudes for peak 10 micrometer emission are estimated to be near 80 km for Mars and 120 km for Venus.

Johnson, M. A.↗

9.6 micrometer ozone band /nu sub 3/ intensity

The band intensity of the 9.6 micrometer (nu sub 3) band of ozone was investigated. The nu sub 3 band strength was determined from ultraviolet spectra over the interval 9.36-11.00 micrometers. A set of 34 absorption measurements were made at pressures of about 730 torr and mass paths of 0.002-0.025 atm cm (STP). The ozone amounts were corrected to the Harn (1961) absorption coefficients. The data indicate that the weak-line approximation is valid at least to 0.025 atm cm (STP). A least-squares fit yields a band strength (298 K) of 355/cm/atm cm STP with a standard deviation of 10/cm/atm cm STP, in close agreement with results reported by McCaa and Shaw (1968) and Young and Bunner (1974).

Bartman, F. L.↗

Wideband 1.064 micrometer detector evaluation

Several types of communications detectors for use in a 400 Mbps 1.064 micrometer laser communication system were evaluated and characterized. The communication system Bit Error Rate (BER) performance was measured, and test results for the best detector of each type are summarized. The complete BER curves are presented. The 400 Mbps 1.064 micrometer communication system receiver test bed is described. The best performance levels which can be achieved by focusing the signal to diffraction limited spots on the photosensitive area are cited.

Green, S. I.↗

Upper limits to trace constituents in Jupiter's atmosphere from an analysis of its 5 micrometer spectrum

A high-resolution spectrum of Jupiter at 5 micrometers recorded at the Kuiper Airborne Observatory is used to determine upper limits to the column density of 19 molecules. The upper limits to the mixing ratios of SiH4, H2S, HCN, and simple hydrocarbons are discussed with respect to current models of Jupiter's atmosphere. These upper limits are compared to expectations based upon the solar abundance of the elements. This analysis permits upper limit measurements (SiH4), or actual detections (GeH4) of molecules with mixing ratios with hydrogen as low as 10 to the minus 9th power. In future observations at 5 micrometers the sensitivity of remote spectroscopic analyses should permit the study of constituents with mixing ratios as low as 10 to the minus 10th power, which would include the hydrides of such elements as Sn and As as well as numerous organic molecules.

Treffers, R. R.↗

Infrared images of Jupiter at 5-micrometer wavelength during the Voyager 1 encounter

A coordinated program to observe Jupiter at high spatial resolution in the 5-micrometer wavelength region was undertaken to support Voyager 1 imaging and infrared radiation experiment targeting. Jupiter was observed over a 5-month period from Palomar and Mauna Kea observatories. The frequency of observations allowed the selection of interesting areas for closer Voyager examination and also provided good short-term monitoring of variations in cloud morphology. Significant global changes in the 5-micrometer distribution are seen over this time period.

Terrile, R. J.↗

Jupiter's cloud distribution between the Voyager 1 and 2 encounters - Results from 5-micrometer imaging

As part of a continuing effort of ground-based support for Voyager target selection, infrared images in the 5-micrometer wavelength region were acquired in preparation for the Voyager 2 flyby of Jupiter. Observations were made during May 1979 from the Palomar 5-meter telescope and the new 3-meter NASA Infrared Telescope Facility at Mauna Kea and are compared to previous observations. Variations seen in the 5-micrometer flux distribution suggest global patterns of clouding over of some Jovian belts and clearing of others. These data were used to predict the Jovian cloud distribution at the time of the Voyager 2 encounter in order to target the imaging and infrared experiments to areas free of high obscuring clouds.

Terrile, R. J.↗

A portable spectrometer for use from 5 to 15 micrometers

A field portable spectrometer suitable for collecting data relevant to remote sensing applications in the 8 to 12 micrometer atmospheric window has been built at the Jet Propulsion Laboratory. The instrument employs a single cooled HgCdTe detector and a continuously variable filter wheel analyzer. The spectral range covered is 5 to 14.5 micrometers and the resolution is approximately 1.5 percent of the wavelength. A description of the hardware is followed by a discussion of the analysis of the spectral data leading to finished emissivity and radiance spectra. A section is devoted to the evaluation of the instrument performance with respect to spectral resolution, radiometric precision, and accuracy. Several examples of spectra acquired in the field are included.

Hoover, G.↗

Acid dissolution experiments - Carbonates and the 6.8-micrometer bands in interplanetary dust particles

A chemical dissolution experiment on an interplanetary dust particle (IDP) showed that carbonates, not acid-insoluble organic compounds, were responsible for virtually all the absorption at 6.8 micrometers seen in the infrared spectra of this particle. The IDP examined had an infrared spectrum characteristic of layer-lattice silicates and belongs to a class of IDP's whose spectra resemble those of protostellar objects like W33 A, which also exhibit a band at 6.8 micrometers.

Sandford, S. A.↗

Possible identifications of the 3.4 micrometer feature

A feature at 3.4 micrometer was first detected in Comet Halley by the IKS spectrometer on board the Vega 1 probe; and subsequently from the ground. The feature has since been reported in Comet Wilson. The presence of the feature is of considerable interest for a number of reasons. First, it may represent the detection of a new parent molecule, and when combined with data from Giotto and Vega yield new information on cometary chemistry and the early solar system composition. Secondly, it may represent a link to the interstellar medium, the feature corresponds in wavelength and shape with an interstellar feature seen in absorption in a luminous star, towards the Galactic center known as GC-IRS7. The feature in turn is thought to be related with a growing family of unidentified infrared emission features seen in stellar objects, planetary nebulae, reflection nebulae, HII regions and extra galactic sources. These features occur at wavelengths 3.3, 3.4, 3.5, 6.2, 7.7, 8.6, and 11.25 micrometers. Further identification theory is given.

Danks, Anthony C.↗

The spectral appearance of comets from 5 to 20 micrometers: A survey of the data

Based on the concept of comets as being conglomerates of rocks and ices, it is expected that they reflect these components in their emission spectra. Silicate materials (rocks) are common in many astronomical environments and show prominent features at about 10 and 18 micrometers. Carbon should be abundant, but is much more difficult to detect spectroscopically since it has no strong features (except for the hydrogenated form). Ices are present in comets, but they are difficult to detect since they are volatile enough to dissipate when the comet is bright enough to be easily observed in the IR, with present equipment. There are other materials present in comets, but the ones listed above should be the most common and thus dominate the thermal IR spectrum. Most of the IR observations made on comets between 5 and 20 micrometers are summarized. They fall into three broad categories: (1) filter photometry; (2) circular variable filter wheel spectroscopy; and (3) spectra obtained with multidetector grating spectrometers.

Bregman, Jesse D.↗

Computation and use of the reflectivity at 3.75 micrometers from AVHRR thermal channels

Global study of land surface properties uses AVHRR channels 1 and 2, but channel 3 may be of interest, although its use requires preprocessing. It consists of both a reflective part and an emissive part, the former can be derived from T3, T4 and T5. Since the water vapor affects channel 3, its content is retrieved from the channel 4 and 5 using the split window technique. A formula of reflective part retrieval at 3.75 micrometers is tested in the case of sunglint observations where the emissivities of channels 4 and 5 can be set to the unity. The formula is adapted and validated to land surface using the FIFE-87 data set. Preliminary applications of the reflectance at 3.75 micrometers to the studies of surface properties retrieval, aerosol retrieval over land, and desertic aerosol retrieval, are addressed.

Roger, J. C.↗

4.8 - 20 micrometer imaging of Orion BN/KL: 2: A new look at luminosity at sources and the role of IRc2

We have reconsidered the energetics of the BN/KL infrared complex, using array images at nine wavelengths between 4.8 and 20 micrometer, and find a much lower luminosity for IRc2 than the generally accepted value. The new observations resolve 1arcsec structure throughout the region, including several new compact sources within a few arcsec of IRc2 and significant details imaged in the 9.7 micrometer silicate feature. Together with other recent work, the results suggest that luminous stars associated with three compact HII regions found within BN/KL, rather than IRc2, may be the more significant luminosity sources for the complex.

Gezari, Daniel Y.↗