Search NASA⌕ Search

SEARCH · Search NASA

Results for “MICROWAVE SPECTRUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

The microwave spectrum of the AlO radical

The rotational spectrum of the aluminum monoxide radical in the ground electronic state X 2Sigma(+) was observed in the millimeter- and submillimeter-wave region. Aluminum monoxide radicals were generated directly in a flow reactor absorption cell by the reaction of N2O with aluminum vaporized from a high-temperature crucible. The observed spectrum was analyzed to yield molecular constants including the rotational constant, centrifugal distortion constant, spin-rotation interaction constant, magnetic hyperfine interaction constants, and nuclear quadrupole coupling constant.

Yamada, Chikashi↗
NASA NTRS2012

Wideband Agile Digital Microwave Radiometer

The objectives of this work were to take the initial steps needed to develop a field programmable gate array (FPGA)- based wideband digital radiometer backend (>500 MHz bandwidth) that will enable passive microwave observations with minimal performance degradation in a radiofrequency-interference (RFI)-rich environment. As manmade RF emissions increase over time and fill more of the microwave spectrum, microwave radiometer science applications will be increasingly impacted in a negative way, and the current generation of spaceborne microwave radiometers that use broadband analog back ends will become severely compromised or unusable over an increasing fraction of time on orbit. There is a need to develop a digital radiometer back end that, for each observation period, uses digital signal processing (DSP) algorithms to identify the maximum amount of RFI-free spectrum across the radiometer band to preserve bandwidth to minimize radiometer noise (which is inversely related to the bandwidth). Ultimately, the objective is to incorporate all processing necessary in the back end to take contaminated input spectra and produce a single output value free of manmade signals to minimize data rates for spaceborne radiometer missions. But, to meet these objectives, several intermediate processing algorithms had to be developed, and their performance characterized relative to typical brightness temperature accuracy re quirements for current and future microwave radiometer missions, including those for measuring salinity, soil moisture, and snow pack.

Gaier, Todd C.↗
DOE OSTI2021

Distributed Acoustic Sensing Based on Coherent Microwave Photonics Interferometry

A microwave photonics method has been developed for measuring distributed acoustic signals. This method uses microwave-modulated low coherence light as a probe to interrogate distributed in-fiber interferometers, which are used to measure acoustic-induced strain. By sweeping the microwave frequency at a constant rate, the acoustic signals are encoded into the complex microwave spectrum. The microwave spectrum is transformed into the joint time–frequency domain and further processed to obtain the distributed acoustic signals. The method is first evaluated using an intrinsic Fabry Perot interferometer (IFPI). Acoustic signals of frequency up to 15.6 kHz were detected. The method was further demonstrated using an array of in-fiber weak reflectors and an external Michelson interferometer. Two piezoceramic cylinders (PCCs) driven at frequencies of 1700 Hz and 3430 Hz were used as acoustic sources. The experiment results show that the sensing system can locate multiple acoustic sources. The system resolves 20 nε when the spatial resolution is 5 cm. The recovered acoustic signals match the excitation signals in frequency, amplitude, and phase, indicating an excellent potential for distributed acoustic sensing (DAS).

47 OTHER INSTRUMENTATION↗
NASA NTRS2009

Compact Microwave Fourier Spectrum Analyzer

A compact photonic microwave Fourier spectrum analyzer [a Fourier-transform microwave spectrometer, (FTMWS)] with no moving parts has been proposed for use in remote sensing of weak, natural microwave emissions from the surfaces and atmospheres of planets to enable remote analysis and determination of chemical composition and abundances of critical molecular constituents in space. The instrument is based on a Bessel beam (light modes with non-zero angular momenta) fiber-optic elements. It features low power consumption, low mass, and high resolution, without a need for any cryogenics, beyond what is achievable by the current state-of-the-art in space instruments. The instrument can also be used in a wide-band scatterometer mode in active radar systems.

Savchenkov, Anatoliy↗
NASA NTRS1979

Distortions of the cosmic microwave background spectrum by dust

The effects of dust in the early universe on the spectrum of the cosmic microwave background are considered, taking into account the effects of a pregalactic generation of stars. It is shown that observed distortions of the background spectrum from that of a black body at 3 K could be due to emission by silicate dust grains at a metal abundance of 0.00001 by mass and with a substantial energy input, which represent the remnants of population III stars. Attempts to fit the microwave background spectrum to the model of Rees (1978) in which the entire cosmic background is accounted for by grain emission are shown to require an implausible value for the metal abundance at early epochs, and not to agree with the millimeter and submillimeter spectrum observed by Woody and Richards (1979).

Rowan-Robinson, M.↗
NASA NTRS2017

Doped Chiral Polymer Metamaterials

Some implementations provide a composite material that includes a first material and a second material. In some implementations, the composite material is a metamaterial. The first material includes a chiral polymer (e.g., crystalline chiral helical polymer, poly-.gamma.-benzyl-L-glutamate (PBLG), poly-L-lactic acid (PLA), polypeptide, and/or polyacetylene). The second material is within the chiral polymer. The first material and the second material are configured to provide an effective index of refraction value for the composite material of 1 or less. In some implementations, the effective index of refraction value for the composite material is negative. In some implementations, the effective index of refraction value for the composite material of 1 or less is at least in a wavelength of one of at least a visible spectrum, an infrared spectrum, a microwave spectrum, and/or an ultraviolet spectrum.

Park, Cheol↗
NASA NTRS1994

Measurement of the cosmic microwave background spectrum by the COBE FIRAS instrument

The cosmic microwave background radiation (CMBR) has a blackbody spectrum within 3.4 x 10(exp -8) ergs/sq cm/s/sr cm over the frequency range from 2 to 20/cm (5-0.5 mm). These measurements, derived from the Far-Infrared Absolute Spectrophotomer (FIRAS) instrument on the Cosmic Background Explorer (COBE) satellite, imply stringent limits on energy release in the early universe after t approximately 1 year and redshift z approximately 3 x 10(exp 6). The deviations are less than 0.30% of the peak brightness, with an rms value of 0.01%, and the dimensionless cosmological distortion parameters are limited to the absolute value of y is less than 2.5 x 10(exp -5) and the absolute value of mu is less than 3.3 x 10(exp -4) (95% confidence level). The temperature of the CMBR is 2.726 +/- 0.010 K (95% confidence level systematic).

Mather, J. C.↗
NASA NTRS1975

Microwave emission spectrum of the moon - Mean global heat flow and average depth of the regolith

Earth-based observations of the lunar microwave brightness temperature spectrum at wavelengths between 5 and 500 centimeters, when reexamined in the light of physical property data derived from the Apollo program, tentatively support the high heat flows measured in situ and indicate that a regolith thickness between 10 and 30 meters may characterize a large portion of the lunar near side.

Keihm, S. J.↗
NASA NTRS1987

Microwave dielectric spectrum of vegetation. I - Experimental observations. II - Dual-dispersion model

The microwave dielectric behavior of vegetation materials is examined as a function of water content, microwave frequency, and temperature. Dielectric spectra for various types of vegetation, such as leaves, stalks, and trunks at various moisture conditions, were measured using a coaxial probe technique. The basic features and operation of the coaxial probe system are described. Examples of dielectric measurements for the vegetation materials are presented, and the relation between temperature and the dielectric constant is studied. The development of a dual-dispersion model that accounts for the dielectric properties of water in both free and bound conditions is described. The applicability of the model is evaluated by comparing it with the dielectric data; good correlation is observed between the model and the data over a wide range of moisture conditions and over the 0.2-20 GHz range.

El-Rayes, Mohamed A.↗
NASA NTRS2002

The Effects of Low- and High-Energy Cutoffs on Solar Flare Microwave and Hard X-Ray Spectra

Microwave and hard x-ray spectra provide crucial information about energetic electrons and their environment in solar flares. These spectra are becoming better determined with the Owens Valley Solar Array (OVSA) and the recent launch of the Ramaty High Energy Solar Spectroscopic Imager (RHESSI). The proposed Frequency Agile Solar Radiotelescope (FASR) promises even greater advances in radio observations of solar flares. Both microwave and hard x-ray spectra are sensitive to cutoffs in the electron distribution function. The determination of the high-energy cutoff from these spectra establishes the highest electron energies produced by the acceleration mechanism, while determination of the low-energy cutoff is crucial to establishing the total energy in accelerated electrons. This paper will show computations of the effects of both high- and low-energy cutoffs on microwave and hard x-ray spectra. The optically thick portion of a microwave spectrum is enhanced and smoothed by a low-energy cutoff, while a hard x-ray spectrum is flattened below the cutoff energy. A high-energy cutoff steepens the microwave spectrum and increases the wavelength at which the spectrum peaks, while the hard x-ray spectrum begins to steepen at photon energies roughly an order of magnitude below the electron cutoff energy. This work discusses how flare microwave and hard x-ray spectra can be analyzed together to determine these electron cutoff energies. This work is supported in part by the NASA Sun-Earth Connection Program.

Holman, G. D.↗
NASA NTRS1988

Microwave dielectric spectrum of rocks

A combination of several measurement techniques was used to investigate the dielectric properties of 80 rock samples in the microwave region. The real part of the dielectric constant, epsilon', was measured in 0.1 GHz steps from 0.5 to 18 GHz, and the imaginary part, epsilon'', was measured at five frequencies extending between 1.6 and 16 GHz. In addition to the dielectric measurements, the bulk density was measured for all the samples and the bulk chemical composition was determined for 56 of the samples. The study shows that epsilon' is frequency-dependent over the 0.5 to 18 GHz range for all rock samples, and that the bulk density rho accounts for about 50 percent of the observed variance of epsilon'. For individual rock types (by genesis), about 90 percent of the observed variance may be explained by the combination of density and the fractional contents of SiO2, Fe2O3, MgO, and TiO2. For the loss factor epsilon'', it was not possible to establish statistically significant relationships between it and the measured properties of the rock samples (density and chemical composition).

Ulaby, F. T.↗
NASA NTRS1983

Great microwave bursts and hard X-rays from solar flares

The microwave and hard X-ray charateristics of 13 solar flares that produced microwave fluxes greater than 500 Solar Flux Units were analyzed. These Great Microwave Bursts were observed in the frequency range from 3 to 35 GHz at Berne, and simultaneous hard X-ray observations were made in the energy range from 30 to 500 keV with the Hard X-Ray Burst Spectrometer on the Solar Maximum Mission spacecraft. The principal aim of this analysis is to determine whether or not the same distribution of energetic electrons can explain both emissions. Correlations were found between respective temporal characteristics and, for the first time, between microwave and hard X-ray spectral characteristics. A single-temperature and a multi-temperature model from the literature were tested for consistency with the coincident X-ray and microwave spectra at microwave burst maximum. Four events are inconsistent with both of the models tested, and neither of the models attempts to explain the high-frequency part of the microwave spectrum. A model in which the emissions above and below the peak frequency originate in two different parts of a diverging magnetic loop is proposed. With this model the entire microwave spectrum of all but one of the events is explained.

Wiehl, H. J.↗
NASA NTRS1990

A preliminary measurement of the cosmic microwave background spectrum by the Cosmic Background Explorer (COBE) satellite

A preliminary spectrum is presented of the background radiation between 1 and 20/cm from regions near the north Galactic pole, as observed by the FIRAS instrument on the COBE satellite. The spectral resolution is 1/cm. The spectrum is well fitted by a blackbody with a temperature of 2.735 + or - 0.06 K, and the deviation from a blackbody is less than 1 percent of the peak intensity over the range 1-20/cm. These new data show no evidence for the submillimeter excess previously reported by Matsumoto et al. (1988) in the cosmic microwave background. Further analysis and additional data are expected to improve the sensitivity to deviations from a blackbody spectrum by an order of magnitude.

Mather, J. C.↗
DOE OSTI2024

Angular correlations of cosmic microwave background spectrum distortions from photon diffusion

ABSTRACT During cosmic recombination, charged particles bind into neutral atoms and the mean free path of photons rapidly increases, resulting in the familiar diffusion damping of primordial radiation temperature variations. An additional effect is a small photon spectrum distortion, because photons arriving from a particular sky direction were originally in thermal equilibrium at various spatial locations with different temperatures; the combination of these different blackbody temperature distributions results in a spectrum with a Compton y-distortion. Using the approximation that photons had zero mean free path prior to their second-to-last scattering, we derive an expression for the resulting y-distortion, and compute the angular correlation function of the diffusion y-distortion and its cross-correlation with the square of the photon temperature fluctuation. Detection of the cross-correlation is within reach of existing arcminute-resolution microwave background experiments such as the Atacama Cosmology Telescope and the South Pole Telescope.

Astronomy & Astrophysics↗
NASA NTRS1967

Radio astronomy

Radio astronomical studies of microwave spectrum, radial velocity, dielectric constants, and emissions

MICROWAVE SPECTRUM↗
NASA NTRS1994

Angular power spectrum of the microwave background anisotropy seen by the COBE differential microwave radiometer

The angular power spectrum estimator developed by Peebles (1973) and Hauser & Peebles (1973) has been modified and applied to the 2 yr maps produced by the Cosmic Background Explorer Satellite Differential Microwave Radiometer (COBE DMR)). The power spectrum of the real sky has been compared to the power spectra of a large number of simulated random skies produced with noise equal to the observed noise and primordial density fluctuation power spectra of power-law form, with P(k) proportional to k(exp n). Within the limited range of spatial scales covered by the COBE DMR, corresponding to spherical harmonic indices 3 less than or = l is less than or approximately = 30, the best-fitting value of the spectral index is n = 1.25(sup +0.39 sub -0.44) with the Harrisson-Zel'dovich value n = 1 approximately 0.5 sigma below the best fit. For 3 less than or = l less than or approximately = 19, the best fit is n = 1.46(sup +0.39 sub -0.44). Comparing the COBE DMR delta-T/T at small l to the delta-T/T at l approximately = 50 from degree scale anisotropy experiments gives a smaller range of acceptable spectral indices which includes n = 1.

Wright, E. L.↗