Search NASA⌕ Search

SEARCH · Search NASA

Results for “MIXING RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

A numerical transport scheme which avoids negative mixing ratios

A new scheme for numerically integrating the transport equation has been developed. This square root method avoids the problem of negative mixing ratios by using the square root of the concentration instead of the concentration itself as an advective time step. Conservation of total mass at every time step is achieved by extending the concept of quadratic conservation to the numerical time integration method. A few time schemes that fulfill the requirement of step-by-step quadratic conservation are described, the simplest of which is the modified Lax-Wendroff method.

Schneider, H.-R.↗

Stratospheric NO2 and H2O mixing ratio profiles from high resolution infrared solar spectra using nonlinear least squares

Nonlinear least squares spectral curve fitting has been used to derive vertical mixing ratio profiles for NO2 and H2O above 16 km from high resolution (0.2/cm) solar spectra collected during sunset with a balloon borne interferometer. The NO2 profile shows a sharp peak of 8 ppbv at 32 km falling rapidly to less than 0.5 ppbv at 17 km. The H2O profile shows a broad peak of 6.5 ppmv at 30 km falling to less than 4 ppmv at 17 km.

Niple, E.↗

Comparative Analysis of Alternative Spectral Bands of CO2 and O2 for the Sensing of CO2 Mixing Ratios

We performed comparative studies to establish favorable spectral regions and measurement wavelength combinations in alternative bands of CO2 and O2, for the sensing of CO2 mixing ratios (XCO2) in missions such as ASCENDS. The analysis employed several simulation approaches including separate layers calculations based on pre-analyzed atmospheric data from the modern-era retrospective analysis for research and applications (MERRA), and the line-byline radiative transfer model (LBLRTM) to obtain achievable accuracy estimates as a function of altitude and for the total path over an annual span of variations in atmospheric parameters. Separate layer error estimates also allowed investigation of the uncertainties in the weighting functions at varying altitudes and atmospheric conditions. The parameters influencing the measurement accuracy were analyzed independently and included temperature sensitivity, water vapor interferences, selection of favorable weighting functions, excitations wavelength stabilities and other factors. The results were used to identify favorable spectral regions and combinations of on / off line wavelengths leading to reductions in interferences and the improved total accuracy.

Pliutau, Denis↗

The ammonia mixing ratio in Jupiter's stratosphere

The paper describes the theory that underlies the model calculations which show that the far-infrared bands of ammonia are very sensitive to the ammonia distribution above the Jovian atmospheric inversion layer. Observation of the J = 5 and J = 6 ammonia bands at moderate resolution might permit choice between a cold trap model or the irreversible uv photodestruction model for the ammonia distribution. The lack of prominent emission cores in the NH3 rotation-inversion lines only implies that the mixing ratio is low. The ammonia is uniformly mixed if the inversion temperature is low but, at a higher inversion temperature, emission cores will be observed unless the photodissociation is extremely efficient down to at least the inversion layer.

Goorvitch, D.↗

Trace constituent mixing ratios in the lower stratosphere during the 1977 intertropical convergence zone experiment

Minor constituents in the atmosphere can play an important role as tracers in studies of atmospheric transport and mixing. Simultaneous measurements of the vertical distribution of trace constituents in the troposphere and lower stratosphere were conducted in the region of the Intertropical Convergence Zone (ITCZ). An effort was made to measure the mixing ratios of selected trace constituents. A cryogenic sampling system on board a U-2 aircraft was used to acquire whole-air samples and to cryogenically collect samples at 13.7 to 21.3 km. Simultaneous tropospheric measurements using whole-air sampling canisters on board a Learjet aircraft were also carried out.

Vedder, J. F.↗

Relationship Between Column-Density and Surface Mixing Ratio: Statistical Analysis of O3 and NO2 Data from the July 2011 Maryland DISCOVER-AQ Mission

To investigate the ability of column (or partial column) information to represent surface air quality, results of linear regression analyses between surface mixing ratio data and column abundances for O3 and NO2 are presented for the July 2011 Maryland deployment of the DISCOVER-AQ mission. Data collected by the P-3B aircraft, ground-based Pandora spectrometers, Aura/OMI satellite instrument, and simulations for July 2011 from the CMAQ air quality model during this deployment provide a large and varied data set, allowing this problem to be approached from multiple perspectives. O3 columns typically exhibited a statistically significant and high degree of correlation with surface data (R(sup 2) > 0.64) in the P- 3B data set, a moderate degree of correlation (0.16 < R(sup 2) < 0.64) in the CMAQ data set, and a low degree of correlation (R(sup 2) < 0.16) in the Pandora and OMI data sets. NO2 columns typically exhibited a low to moderate degree of correlation with surface data in each data set. The results of linear regression analyses for O3 exhibited smaller errors relative to the observations than NO2 regressions. These results suggest that O3 partial column observations from future satellite instruments with sufficient sensitivity to the lower troposphere can be meaningful for surface air quality analysis.

nitrogen dioxide↗

A possible deuterium anomaly: Implications of the CH3D/CH4 mixing ratios in the atmospheres of Jupiter, Saturn, and Uranus

Observations of CH3D in the atmospheres of the outer planets provide a test of the theory of deuterium fractionation equilibrium in the formation and evolution of these planets. Recent measurements of the CH3D/CH4 mixing ratios made for Saturn and Uranus are presented and intercompared with current values of Jupiter, illustrating large differences between the planets. Their implied D/H ratios are compared to D/H ratios derived from measurements of HD/H2; and, in the cases of Jupiter and Saturn, they may be incompatible. Implications of these comparisons are discussed in terms of the deuterium fractionation chemistry and possible enrichments of deuterium in the core ices of the planets.

Lutz, Barry L.↗

First Look at the Upper Tropospheric Ozone Mixing Ratio from OMI Estimated using the Cloud Slicing Technique

The Cloud Slicing technique has emerged as a powerful tool for the study of ozone in the upper troposphere. In this technique one looks at the variation with cloud height of the above-cloud column ozone derived from the backscattered ultraviolet instruments, such as TOMS, to determine the ozone mixing ratio. For this technique to work properly one needs an instrument with relatively good horizontal resolution with very good signal to noise in measuring above-cloud column ozone. In addition, one needs the (radiatively) effective cloud pressure rather than the cloud-top pressure, for the ultraviolet photons received by a satellite instrument are scattered from inside the cloud rather than from the top. For this study we use data from the OMI sensor, which was recently launched on the EOS Aura satellite. OMI is a W-Visible backscattering instrument with a nadir pixel size of 13 x 24 km. The effective cloud pressure is derived from a new algorithm based on Rotational Raman Scattering and O2-O2, absorption in the 340-400 nm band of OMI.

Bhartia, Pawan K.↗

Effect of the HITRAN 92 spectral data on the retrieval of NO2 mixing ratios from Nimbus 7 LIMS

To ensure spectral consistency when comparing Nimbus 7 Limb Infrared Monitor of the Stratosphere Experiment (LIMS) NO2 distributions with those from Atmosphere Trace Molecule Spectroscopy (ATMOS) and Upper Atmosphere Research Satellite Experiments (UARS), 1 day (May 5, 1979) of LIMS measurements were reprocessed using the NO2 line list on the HITRAN 92 tape compiled by the Airforce Geophysics Laboratory (AFGL). The revised NO2 mixing ratios are smaller by up to 20%. The decrease is not constant with height, latitude, or time of day but depends on the absolute amount of NO2 in the profile, as a result of a change in the degree of saturation for the strong NO2 spectral lines. The revised NO2 agrees better with correlative measurements and with NO2 distributions from the Stratospheric Aerosol and Gas Experiment (SAGE) and Halogen Occultation Experiment (HALOE) satellite experiments but not with those from ATMOS 85. Profiles of the day/night ratio of revised NO2 are now larger near 5 hPa. There is also some improvement between observed and modeled ozone in the upper stratosphere, when the revised nighttime NO2 profile is used as the estimate of NO(y) for the model calculations.

Remsburg, Ellis E.↗

Venus cloud properties - Infrared opacity and mass mixing ratio

By using the Mariner 5 temperature profile and a homogeneous cloud model, and assuming that CO2 and cloud particles are the only opacity sources, the wavelength dependence of the Venus cloud opacity is inferred from the infrared spectrum of the planet between 450 and 1250 per cm. Volume extinction coefficients varying from 0.000005 to 0.000015 per cm, depending on the wavelength, are determined at the tropopause level of 6110 km. By using all available data, a cloud mass mixing ratio of approximately 0.000005 and a particle concentration of about 900 particles per cu cm at this level are also inferred. The derived cloud opacity compares favorably with that expected for a haze of droplets of a 75% aqueous solution of sulfuric acid.

Samuelson, R. E.↗

Mobile lidar system for measurement of water vapor mixing ratio and ozone number density

The Water Vapor Lidar was modified and extended to make differential absorption measurements of ozone. Water vapor measurements make use of a weak molecular scattering process known as Raman scattering. It is characterized by a shift in wavelength of the scattered beam of light relative to the incident one. Some of the energy of the incident photon is converted to vibrational or rotational energy within the molecule leaving the scattered photon shifted to a slightly longer wavelength. When performing water vapor measurements, profiles are acquired of water vapor mixing ratio from near the ground to beyond 7 km every 2 minutes. By forming a color composite image of the individual profiles, the spatial and temporal evolution of water vapor is visible with vertical resolution of 75 to 150m and temporal resolution of 2 minutes. The ozone lidar is intended for use as a cross calibration facility for other stationary ozone lidar systems. The ozone measurement employs the technique known as differential absorption. The backscattered laser radiation from two different wavelengths is measured. Successful measurements of 308 nm returns were made from 80 km with an averaging period of 6 hours. Using these data and a standard atmosphere density curve, an ozone number density profile was made which agrees very well with the standard ozone curve between 20 and 40 km.

Whiteman, D.↗

Venus cloud properties: Infrared opacity and mass mixing ratio

By using the Mariner 5 temperature profile and a homogeneous cloud model, and assuming that CO2 and cloud particles are the only opacity sources, the wavelength dependence of the Venus cloud opacity is inferred from the infrared spectrum of the planet between 450 and 1250/cm. Justification for applying the homogeneous cloud model is found in the fact that numerous polarization and infrared data are mutually consistent within the framework of such a model; on the other hand, dense cloud models are not satisfactory. Volume extinction coefficients varying from 0.000005 to 0.000015/cm depending on the wavelength, are determined at the tropopause level of 6110 km. By using all available data, a cloud mass mixing ratio of approximately 0.000005 and a particle concentration of about 900 particles per cu cm at this level are also inferred. The derived cloud opacity compares favorably with that expected for a haze of droplets of a 75% aqueous solution of sulfuric acid.

Samuelson, R. E.↗

Assimilation of Goes-Derived Skin Temperature Tendencies into Mesoscale Models to Improve Forecasts of near Surface Air Temperature and Mixing Ratio

A technique has been developed for assimilating GOES-FR skin temperature tendencies into the surface energy budget equation of a mesoscale model so that the simulated rate of temperature chance closely agrees with the satellite observations. A critical assumption of the technique is that the availability of moisture (either from the soil or vegetation) is the least known term in the model's surface energy budget. Therefore, the simulated latent heat flux, which is a function of surface moisture availability, is adjusted based upon differences between the modeled and satellite-observed skin temperature tendencies. An advantage of this technique is that satellite temperature tendencies are assimilated in an energetically consistent manner that avoids energy imbalances and surface stability problems that arise from direct assimilation of surface shelter temperatures. The fact that the rate of change of the satellite skin temperature is used rather than the absolute temperature means that sensor calibration is not as critical. An advantage of this technique for short-range forecasts (0-48 h) is that it does not require a complex land-surface formulation within the atmospheric model. As a result, the need to specify poorly known soil and vegetative characteristics is eliminated. The GOES assimilation technique has been incorporated into the PSU/NCAR MM5. Results will be presented to demonstrate the ability of the assimilation scheme to improve short- term (0-48h) simulations of near-surface air temperature and mixing ratio during the warm season for several selected cases which exhibit a variety of atmospheric and land-surface conditions. In addition, validation of terms in the simulated surface energy budget will be presented using in situ data collected at the Southern Great Plains (SGP) Cloud And Radiation Testbed (CART) site as part of the Atmospheric Radiation Measurements Program (ARM).

Lapenta, William M.↗

Large Engine Technology (LET) Task XXXVII Low-Bypass Ratio Mixed Turbofan Engine Subsonic Jet Noise Reduction Program Test Report

NASA Glenn Research Center supported a three year effort to develop the technology for reducing jet noise from low-bypass ratio engines. This effort concentrated on both analytical and experimental approaches using various mixer designs. CFD and MGB predictions are compared with LDV and noise data, respectively. While former predictions matched well with data, experiment shows a need for improving the latter predictions. Data also show that mixing noise can be sensitive to engine hardware upstream of the mixing exit plane.

Hauser, Joseph R.↗