Search NASA⌕ Search

SEARCH · Search NASA

Results for “MOMENT EQUATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Supersonic Pitch Damping Predictions of Blunt Entry Vehicles from Static CFD Solutions

A technique for predicting supersonic pitch damping of blunt axisymmetric bodies from static CFD data is presented. The contributions to static pitching moment due to forebody and aftbody pressure distributions are broken out and considered separately. The one-dimension moment equation is cast to model the separate contributions from forebody and aftbody pressures with no traditional damping term included. The aftbody contribution to pitching moment is lagged by a phase angle of the natural oscillation period. This lag represents the time for aftbody wake structures to equilibrate while the body is oscillation. The characteristic equation of this formulation indicates that the lagged backshell moment adds a damping moment equivalent in form to a constant pitch damping term. CFD calculations of the backshell's contribution to the static pitching moment for a range of angles-of-attack is used to predict pitch damping coefficients. These predictions are compared with ballistic range data taken of the Mars Exploration Rover (MER) capsule and forced oscillation data of the Mars Viking capsule. The lag model appears to capture dynamic stability variation due to backshell geometry as well as Mach number.

Schoenenberger, Mark↗

Some theoretical considerations of a stall proof airplane

For the stall proof airplane there should be a stabilizing pitching moment below the stall angle of attack of sufficient amount to prevent the attainment of the stall angle of attack which cannot be over-ridden by control deflections. This paper presents (1) a development of the moment equations to show the theoretical considerations of a stall proof airplane and (2) the nonlinear moment characteristics that must be obtained to satisfy the stall proof requirements. In addition, it is shown that an aerodynamic spoiler located on the under surface of the horizontal tail can be designed to meet these requirements of a stall proof airplane. Wind tunnel results are shown to validate assumptions and predictions.

Chevalier, H. L.↗

A representation for the turbulent mass flux contribution to Reynolds-stress and two-equation closures for compressible turbulence

The turbulent mass flux, or equivalently the fluctuating Favre velocity mean, appears in the first and second moment equations of compressible kappa-epsilon and Reynolds stress closures. Mathematically it is the difference between the unweighted and density-weighted averages of the velocity field and is therefore a measure of the effects of compressibility through variations in density. It appears to be fundamental to an inhomogeneous compressible turbulence, in which it characterizes the effects of the mean density gradients, in the same way the anisotropy tensor characterizes the effects of the mean velocity gradients. An evolution equation for the turbulent mass flux is derived. A truncation of this equation produces an algebraic expression for the mass flux. The mass flux is found to be proportional to the mean density gradients with a tensor eddy-viscosity that depends on both the mean deformation and the Reynolds stresses. The model is tested in a wall bounded DNS at Mach 4.5 with notable results.

Ristorcelli, J. R.↗

Singular perturbation equations for flexible satellites

Force equations of motion of the individual flexible elements of a satellite were obtained in a previous paper. Moment equations of motion of the composite bodies of a flexible satellite are to be developed using two sets of equations which form the basic system for any dynamic model of flexible satellites. This basic system consists of a set of N-coupled, nonlinear, ordinary, or partial differential equations, for a flexible satellite with n generalized, structural position coordinates. For single composite body satellites, N is equal to (n + 3); for dual-spin systems, N is equal to (n + 9). These equations involve time derivatives up to the second order. The study shows a method of avoiding this linearization by reducing the N equations to 3 or 9 nonlinear, coupled, first order, ordinary, differential equations involving only the angular velocities of the composite bodies. The solutions for these angular velocities lead to linear equations in the n generalized structural position coordinates, which can be solved by known methods.

Huang, T. C.↗

The collisional dynamics of particulate disks

It is shown that the use of the Krook equation greatly simplifies the discussion of the collisional dynamics of particulate disks. Collisions are assumed to be inelastic from the outset. A simple heuristic argument is used to compute the effective collision rate in a disk of spherical particles with a power-law distribution of sizes. For Saturn's rings, the effective collision rate for momentum transport is substantially lower than that conventionally estimated on the basis of an observed optical depth at visual wavelengths. The closure of the vertically integrated set of moment equations without discarding the third-order moments at the outset is discussed, allowing for the possibility of a bent disk. In the limit that the collision frequency is much larger than the orbit frequency, the usual Navier-Stokes equations of viscous hydrodynamics for a thin disk are recovered with an explicit expression for the shear viscosity. The method is generalized to include the effects of gravitational scattering.

Shu, F. H.↗

PC analysis of an acousto-ultrasonic signal

An introduction is given to PC software developed to analyze a digitized signal. The specific way in which the software was implemented and the relative ease with which the same software can be implemented in different systems for various applications are discussed. The basic equations and related theory used in the software are furnished. Specifically, mention is made of signal digitization, dc biasing, Fourier analysis, moment analysis, digital filtering, and transfer functions. Examples of calculations are given to indicate the physical significance of variables calculated from the frequency domain via moment equations.

Kiernan, M. T.↗

Principal Effects of Axial Load on Moment-Distribution Analysis of Rigid Structures

This thesis presents the method of moment distribution modified to include the effect of axial load upon the bending moments. This modification makes it possible to analyze accurately complex structures, such as rigid fuselage trusses, that heretofore had to be analyzed by approximate formulas and empirical rules. The method is simple enough to be practicable even for complex structures, and it gives a means of analysis for continuous beams that is simpler than the extended three-moment equation now in common use. When the effect of axial load is included, it is found that the basic principles of moment distribution remain unchanged, the only difference being that the factors used, instead of being constants for a given member, become functions of the axial load. Formulas have been developed for these factors, and curves plotted so that their applications requires no more work than moment distribution without axial load. Simple problems have been included to illustrate the use of the curves.

James, Benjamin Wylie↗

Symmetries in Turbulent Boundary Layer Flows

The objective is the development of a new theory which enables the algorithmic computation of all self-similar mean velocity profiles. The theory is based on Liegroup analysis and unifies a large set of self-similar solutions for the mean velocity of stationary parallel turbulent shear flows. The results include the logarithmic law of the wall, an algebraic law, the viscous sublayer, the linear region in the middle of a Couette flow and in the middle of a rotating channel flow, and a new exponential mean velocity profile not previously reported. Experimental results taken in the outer parts of a high Reynolds number flat-plate boundary layer, strongly support the exponential profile. From experimental as well as from DNS data of a turbulent channel flow the algebraic scaling law could be confirmed in both the center region and in the near wall region. In the case of the logarithmic law of the wall, the scaling with the wall distance arises as a result of the analysis and has not been assumed in the derivation. The crucial part of the derivation of all the different mean velocity profiles is to consider the invariance of the equation for the velocity fluctuations at the same time as the invariance of the equation for the velocity product equations. The latter is the dyad product of the velocity fluctuations with the equation for the velocity fluctuations. It has been proven that all the invariant solutions are also consistent with similarity of all velocity moment equations up to any arbitrary order.

Oberlack, M.↗

Semikinetic and generalized transport models of the polar and solar winds

In order to gain a better understanding of the relative merits of the transport and kinetic approaches to modeling thermal space plasmas, a comparison is presented of a transport (bi-Maxwellian-based 16-moment equations) and a semikinetic description of supersonic flow in the solar wind and also of both supersonic and subsonic flows in the polar wind for 'steady state' conditions. The study shows: remarkable agreement between the two models for supersonic collisionless flows, even for the higher-order moments; the inadequacy of the semikinetic approach for modeling subsonic flows; and the superiority of the 16-moment transport over the semikinetic approach for modeling the solar wind. Further evidence that the bi-Maxwellian-based transport equations are a useful tool for studying 'thermal' space plasmas that develop non-Maxwellian features is provided.

Demars, H. G.↗

The Favre-Reynolds Average Distinction and a Consistent Gradient Transport Expression for the Dissipation

Two equation and higher order closures for compressible turbulence fail to capture the compressible wall layers' log scaling. Accounting for the distinction between Favre and Reynolds averaged variables in the compressible moment equations indicate that turbulent transport expressions obtained using the 'variable density approximation' are in error. The error is related to the enstrophy, a Reynolds averaged variable appearing in the equation for the Favre averaged k; recognizing this fact an expression for the transport of dissipation consistent with simple mixing length arguments is obtained. Within the (limited) context of a gradient transport hypothesis a rational form for the turbulent transport of the dissipation is found. Modestly better agreement with the well established compressible Van Driest log scaling is found in k - epsilon calculation.

Ristorcelli, J. R.↗

Advancements in engineering turbulence modeling

Some new developments in two-equation models and second order closure models are presented. Two-equation models (k-epsilon models) have been widely used in computational fluid dynamics (CFD) for engineering problems. Most of low-Reynolds number two-equation models contain some wall-distance damping functions to account for the effect of wall on turbulence. However, this often causes the confusion and difficulties in computing flows with complex geometry and also needs an ad hoc treatment near the separation and reattachment points. A set of modified two-equation models is proposed to remove the aforementioned shortcomings. The calculations using various two-equation models are compared with direct numerical simulations of channel flow and flat boundary layers. Development of a second order closure model is also discussed with emphasis on the modeling of pressure related correlation terms and dissipation rates in the second moment equations. All the existing models poorly predict the normal stresses near the wall and fail to predict the 3-D effect of mean flow on the turbulence (e.g. decrease in the shear stress caused by the cross flow in the boundary layer). The newly developed second order near-wall turbulence model is described and is capable of capturing the near-wall behavior of turbulence as well as the effect of 3-D mean flow on the turbulence.

Shih, T.-H.↗

Kinetic relaxation of a non-Maxwellian monatomic gas in a state of gross rest

The kinetic relaxation of a monatomic gas in a state of gross rest is studied by use of Maxwell's second-order moment equation. The molecular models considered range from the hard sphere to the Maxwell molecule. The development is exact for an ellipsoidal distribution and becomes a good approximation for more general distributions. The results show that the relaxation of second-order moments is nearly exponential for power-law molecules and that the characteristic time mu/p appears as the principal controlling parameter while the power-law constant plays a secondary role. Comparisons between results of numerical simulations using Bird's direct simulation Monte Carlo method and theory show excellent agreement for both hard-sphere and Maxwell molecules.

Baganoff, D.↗

Advances in engineering turbulence modeling

Some new developments in two equation models and second order closure models are presented. In this paper, modified two equation models are proposed to remove shortcomings such as computing flows over complex geometries and the ad hoc treatment near the separation and reattachment points. The calculations using various two equation models are compared with direct numerical solutions of channel flows and flat plate boundary layers. Development of second order closure models will also be discussed with emphasis on the modeling of pressure related correlation terms and dissipation rates in the second moment equations. All existing models poorly predict the normal stresses near the wall and fail to predict the three dimensional effect of mean flow on the turbulence. The newly developed second order near-wall turbulence model to be described in this paper is capable of capturing the near-wall behavior of turbulence as well as the effect of three dimension mean flow on the turbulence.

Shih, T.-H.↗

The Liquid-Water Oscillation in Modeling Boundary-Layer Cumuli with Third-Order Turbulence Closure Models

A hierarchy of third-order turbulence closure models are used to simulate boundary-layer cumuli in this study. An unrealistically strong liquid-water oscillation (LWO) is found in the fully prognostic model, which predicts all third moments. The LWO propagates from cloud base to cloud top with a speed of 1 m/s. The period of the oscillation is about 1000 s. Liquid-water buoyancy terms in the third-moment equations contribute to the LWO. The LWO mainly affects the vertical profiles of cloud fraction, mean liquid-water mixing ratio and the fluxes of liquid-water potential temperature and total water, but has less impact on the vertical profiles of other second-moments and third-moments. In order to minimize the LWO, a moderate large diffusion coefficient and a large turbulent dissipation at its originating level are needed. However, this approach distorts the vertical distributions of cloud fraction and liquid-water mixing ratio. A better approach is to parameterize liquid-water buoyancy more reasonably. A minimally prognostic model, which diagnoses all third moments except for vertical velocity, is shown to produce better results, compared to a fully prognostic model.

Cheng, A.↗

Shock-wave structure using nonlinear model Boltzmann equations.

The structure of strong plane shock waves in a perfect monatomic gas was studied using four nonlinear models of the Boltzmann equation. The models involved the use of a simplified collision operator with velocity-independent collision frequency, in place of the complicated Boltzmann collision operator. The models employed were the BGK and ellipsoidal models developed by earlier authors, and the polynomial and trimodal gain function models developed during the work. An exact set of moment equations was derived for the density, velocity, temperature, viscous stress, and heat flux within the shock. This set was reduced to a pair of coupled nonlinear integral equations and solved using specially adapted numerical techniques. A new and simple Gauss-Seidel iteration was developed during the work and found to be as efficient as the best earlier iteration methods.

Segal, B. M.↗

Theory of a steady-state nonisothermal positive column in a magnetic field.

The steady state of a nonisothermal cylindrical discharge in a longitudinal magnetic field is described by three moment equations in the plasma approximation for electrons and ions. Volume generation of electron-ion pairs by single-stage ionization, the presence of axial current, and collisions with neutrals are considered. The theory yields radial profiles of the charged particle velocities, density, potential, electron and ion temperatures, and demonstrates similarity laws for the positive column. The results are compared with two-moment theories and with experimental data on helium, argon, and mercury vapor found in the literature for a wide range of pressures.

Ilic, D. B.↗

Functional methods for waves in random media

Some basic ideas in functional methods for waves in random media are illustrated through a simple random differential equation. These methods are then generalized to solve certain random parabolic equations via an exponential representation given by the Feynman-Kac formula. It is shown that these functional methods are applicable to a number of problems in random wave propagation. They include the forward-scattering approximation in Gaussian white-noise media; the solution of the optical beam propagation problem by a phase-integral method; the high-frequency scattering by bounded random media, and a derivation of approximate moment equations from the functional integral representation.

Chow, P. L.↗

Functional methods for waves in random media

Some basic ideas in functional methods for waves in random media are illustrated through a simple random differential equation. These methods are then generalized to solve certain random parabolic equations via an exponential representation given by the Feynman-Kac formula. It is shown that these functional methods are applicable to a number of problems in random wave propagation. They include the forward-scattering approximation in Gaussian white-noise media; the solution of the optical beam propagation problem by a phase-integral method; the high-frequency scattering by bounded random media; and a derivation of approximate moment equations from the functional integral representation.

Chow, P. L.↗