Search NASA⌕ Search

SEARCH · Search NASA

Results for “MULTIPOLARITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Forest discrimination with multipolarization imaging radar

The relations between polarization signatures and biophysical characteristics through a range of different forest environments were investigated using airborne synthetic-aperture (SAR) images acquired at L-band on March 1, 1984 in South Carolina. SAR data acquired in four linear polarization states with 10-m spatial resolution were encoded as color composite images and compared to US Forest Service forest stand data. The most useful correlative forest data were stand basal area, forest age, site condition index, and forest management type. It is found that the multipolarization images discriminate variation in tree density or difference in the amount of understory, but no evidence has been found for discrimination between evergreen and deciduous forest types.

Ford, J. P.↗
NASA NTRS1985

Multipolarization SAR data for surface feature delineation

This paper presents the techniques and the utility of multipolarization Synthetic Aperture Radar (SAR) data for surface feature delineation. Three channels of ratioed data (VV/HH, VH/HH, and VH/VV) are generated from the HH, VV, and VH polarization data (V = vertical, H = horizontal). The technique assumes redundancy of the VH and HV polarization and only VH polarization is used. The ratioed data are linearly stretched to yield a digital number within a range of 0 to 255. Based on the separability measure for two-class delineation, it was found that (1) the ratioed data resulted in a better delineation of surface features with high like (HH or VV) polarization digital number, and (2) the use of ratioed data provided further information not available from the original three-polarization data. The results suggest an advantage in using the ratioed data and the original three-polarization data for surface feature delineation.

Wu, S. T.↗
NASA NTRS1986

Geological applications of multipolarization SAR data

Spaceborne Synthetic Aperture Radar (SAR) data acquired by SEASAT and the Shuttle Imaging Radar (SIR-A/B) operating at L-band with HH polarization were found to be useful in conjunction with other sensors for lithologic discrimination in arid environments with limited vegetation cover. In order to assess the utility of more advanced sensors for geologic research and define the unique contributions each sensor makes, remote sensing data were collected over the Deadman Butte area of the Wind River Basin, Wyoming. The Wind River Basin is an asymmetric sedimentary basin in central Wyoming created during the early Eocene Laramide orogeny. The stratigraphic section of the Deadman Butte study area, which was measured by Woodward is made up of Paleozoic and Mesozoic marine shales, siltstones, limestones, and sandstones. Sensor systems included LANDSAT 4 Thematic Mapper (TM), Thermal Infrared Multispectral Scanner (TIMS) and the Multipolarization, L-band airborne SAR, a prototype for the next Shuttle Imaging Radar (SIR-C). Sensor parameters are given.

Evans, Diane L.↗
NASA NTRS1987

Forest biomass, canopy structure, and species composition relationships with multipolarization L-band synthetic aperture radar data

The effect of forest biomass, canopy structure, and species composition on L-band synthetic aperature radar data at 44 southern Mississippi bottomland hardwood and pine-hardwood forest sites was investigated. Cross-polarization mean digital values for pine forests were significantly correlated with green weight biomass and stand structure. Multiple linear regression with five forest structure variables provided a better integrated measure of canopy roughness and produced highly significant correlation coefficients for hardwood forests using HV/VV ratio only. Differences in biomass levels and canopy structure, including branching patterns and vertical canopy stratification, were important sources of volume scatter affecting multipolarization radar data. Standardized correction techniques and calibration of aircraft data, in addition to development of canopy models, are recommended for future investigations of forest biomass and structure using synthetic aperture radar.

Sader, Steven A.↗
NASA NTRS1987

Roughness measurements with multipolarization aircraft data

Multipolarization SAR data were collected over the SIR-B target area near Fresno, California, a few days before the Shuttle flight. Attempts to use these data to evaluate roughness models were unsuccessful. It is speculated that the processing of those data to give good total swath and target contrast resulted in very little variation among the bare fields. Special processing to provide adequate contrast among the targets of interest and to account for a large incidence angle variation may be necessary to make these data useful for this type of study.

Engman, E. T.↗
NASA NTRS1987

JPL multipolarization workstation - Hardware, software and examples of data analysis

A low-cost stand-alone interactive image processing workstation has been developed for operations on multipolarization JPL aircraft SAR data, as well as data from future spaceborne imaging radars. A recently developed data compression technique is used to reduce the data volume to 10 Mbytes, for a typical data set, so that interactive analysis may be accomplished in a timely and efficient manner on a supermicrocomputer. In addition to presenting a hardware description of the work station, attention is given to the software that has been developed. Three illustrative examples of data analysis are presented.

Burnette, Fred↗
NASA NTRS1988

The effects of undersampling on multipolarization SAR images

The scattering matrix and Stokes matrix formats for multipolarization synthetic aperture radar (SAR) images are introduced. The effects of converting to the Stokes matrix format, without first doubling the sampling rate to allow for the conversion from a complex to an intensity format is quantified and discussed. It is shown that for most applications the Stokes matrix format is acceptable, since errors introduced by undersampling tend to average out when large numbers of pixels are averaged. For those applications requiring analysis of single image pixels, the scattering matrix format is recommended.

Freeman, A.↗
NASA NTRS1989

Per-point and per-field contextual classification of multipolarization and multiple incidence angle aircraft L-band radar data

Multipolarized aircraft L-band radar data are classified using two different image classification algorithms: (1) a per-point classifier, and (2) a contextual, or per-field, classifier. Due to the distinct variations in radar backscatter as a function of incidence angle, the data are stratified into three incidence-angle groupings, and training and test data are defined for each stratum. A low-pass digital mean filter with varied window size (i.e., 3x3, 5x5, and 7x7 pixels) is applied to the data prior to the classification. A predominately forested area in northern Florida was the study site. The results obtained by using these image classifiers are then presented and discussed.

Hoffer, Roger M.↗
NASA NTRS1989

Multipolarization P-, L-, and C-band radar for coastal zone mapping - The Louisiana example

Multipolarization P-, L-, and C-band airborne SAR data sets were acquired over a coastal zone and a forested wetland of southern Louisiana. The data sets were used with field-collected surface-parameter data in order to determine the value of SAR systems in assessing and mapping coastal-zone surface features. The coastal-zone surface features in this study are sediments, sediment distribution, and the formation of new isles and banks. Results of the data analysis indicate that the P-band radar with 68-cm wavelength is capable of detecting the submerged sediment if the area is very shallow (i.e., a water depth of less than one meter). The penetration capability of P-band radar is also demonstrated in the forested wetland area. The composition and condition of the ground surface can be detected, as well as the standing water beneath dense tree leaves.

Wu, Shih-Tseng↗
NASA NTRS1989

Relationships between multipolarized radar backscatter and slash pine stand parameters

Multipolarized L-band (24.5 cm) aircraft radar data was obtained for a primarily forested area in northern Florida. Based on the results of previous studies by Hoffer and Hussin (1989), a swath of medium incidence angle (35-25 deg) data was defined. Three groups of slash pine stands were located in the data: 4- to 17-year-old plantations, 18- to 48-year-old plantations, and 16- to 53-year-old natural stands. Stand data obtained from the forest-products companies operating in the area include age, tree height, diameter-at-breast height, basal area, volume (cords/acre), and density (trees/acre). Each of these stand parameters were compared to each of the four polarizations (HH, VV, VH, and HV) of the radar data for each group of stands. Statistically significant relationships were found between the radar backscatter and the forest stand parameters only for the 4- to 17-year-old slash pine plantation stands. In general, the cross-polarized radar backscatter was more highly correlated with the various stand parameters than the like-polarized backscatter, and the VV-polarized data were more highly correlated than the HH-polarized data.

Hussin, Yousif Ali↗
NASA NTRS1993

Application of high-quality SiO2 grown by multipolar ECR source to Si/SiGe MISFET

A 5 nm-thick SiO2 gate was grown on an Si(p+)/Si(0.8)Ge(0.2) modulation-doped heterostructure at 26 C with an oxygen plasma generated by a multipolar electron cyclotron resonance source. The ultrathin oxide has breakdown field above 12 MV/cm and fixed charge density about 3 x 10 exp 10/sq cm. Leakage current as low as 1/micro-A was obtained with the gate biased at 4 V. The MISFET with 0.25 x 25 sq m gate shows maximum drain current of 41.6 mA/mm and peak transconductance of 21 mS/mm.

Sung, K. T.↗
NASA NTRS1996

Multifrequency, Multipolarization External Calibration of the SIR-C/X-SAR Radars

Progress and the future plans for the following objectives are discussed: (1) Assess the accuracy at which the SIR-C/X-SAR standard data products can be calibrated through the use of ground calibrators to estimate the end-to-end system polarization calibration constants (or distortion parameters) and incorporate the constants into the data processing; (2) Study the cross-calibration between three multipolarization systems: SIR-C, the National Aeronautics and Space Administration/Jet Propulsion Laboratory (NASA/JPL) DC-8 SAR, and the University of Michigan ground-based polarimetric scatterometer; (3) Evaluate the calibration "stability" of SIR-C/X-SAR (measured by variations in the calibration constants) over the range swath width and over a specified distance in azimuth. Variations over a 12-hour period (between ascending and descending passes) will also be studied; and (4) Develop a cost-effective calibration plan including development of inexpensive polarimetric active calibrators.

Freeman, Anthony↗
DOE OSTI2018

Search for multipolar instability in URu 2 Si 2 studied by ultrasonic measurements under pulsed magnetic field

In this study, the elastic properties of URu 2 Si 2 in the high magnetic field region above 40 T, over a wide temperature range from 1.5 to 120 K, were systematically investigated by means of high-frequency ultrasonic measurements. The investigation was performed at high magnetic fields to better investigate the innate bare 5f-electron properties, since the unidentified electronic thermodynamic phase of unknown origin, the so-called “hidden order” (HO), and associated hybridization of conduction and f-electrons (c-f hybridization) are suppressed at high magnetic fields. From the three different transverse modes we find contrasting results; both the Γ 4 (B 2g ) and Γ 5 (E g ) symmetry modes C 66 and C 44 show elastic softening that is enhanced above 30 T, while the characteristic softening of the Γ 3 (B 1g ) symmetry mode (C 11 – C 12 )/2 is suppressed in high magnetic fields. These results underscore the presence of a hybridization-driven Γ 3 (B 1g ) lattice instability in URu 2 Si 2 . However, the results from this work cannot be explained by using existing crystalline electric field schemes applied to the quadrupolar susceptibility in a local 5f 2 configuration. Instead, we present an analysis based on a band Jahn-Teller effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Noncollinear Magnetic Structure and Multipolar Order in Eu 2 Ir 2 O 7

The magnetic properties of the pyrochlore iridate material Eu 2 Ir 2 O 7 (5d 5 ) have been studied based on first principles calculations, where the crystal field splitting Δ , spin-orbit coupling (SOC) λ, and Coulomb interaction U within Ir 5 d orbitals all play significant roles. The ground state phase diagram has been obtained with respect to the strength of SOC and Coulomb interaction U , where a stable antiferromagnetic ground state with all-in–all-out (AIAO) spin structure has been found. In addition, another antiferromagnetic state with energy close to AIAO has also been found to be stable. The calculated nonlinear magnetization of the two stable states both have the d -wave pattern but with a π/4 phase difference, which can perfectly explain the experimentally observed nonlinear magnetization pattern. Finally, compared with the results of the nondistorted structure, it turns out that the trigonal lattice distortion is crucial for stabilizing the AIAO state in Eu 2 Ir 2 O 7 . Furthermore, besides large dipolar moments, we also find considerable octupolar moments in the magnetic states.

36 MATERIALS SCIENCE↗