Search NASA⌕ Search

SEARCH · Search NASA

Results for “Maneuver Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Cislunar Trajectory Design and Maneuver Autonomy for NASA's Moon to Mars Architecture

NASA’s Moon to Mars architecture is an ambitious roadmap of manned cislunar and deep space exploration. The extensive amount of orbital assets required will place a significant burden on ground-based resources, such as communication networks and operations facilities. Spacecraft autonomy is essential for maintaining a vast number of complex missions beyond Earth orbit. To achieve full autonomy, spacecraft must be able to employ methods of robust maneuver design without an explicit dependence on commands sent from the ground. This level of autonomy is needed not only for stationkeeping, but also for outbound transfers. To address the need of spacecraft maneuver design autonomy, this work investigates the use of neural networks (NNs) in a supervised learning environment. A supervised learning approach for NNs allows for a curated training data set, consisting exclusively of perturbations applied to a desired mission concept of operations (ConOps). The proposed approach allows humans on the ground to design a specific mission ConOps before flight, then employ NNs to fly the mission robustly and autonomously. This investigation numerically tests maneuver autonomy in four highly sensitive regions of flight: orbit raising, translunar injection burns, powered lunar flybys, and invariant manifold insertion burns. These straining cases are contextualized by testing them in a demonstration mission, targeting an Earth-Moon L3 orbit. The study first establishes feasibility by automating impulsive burn maneuvers. However, some guidance algorithms will need more intensive commands, such as inertial pointing and angular rates. To validate this method, NN maneuver autonomy is applied to a finite burn model of the demonstration mission. The use of sequential, mission specific maneuvers provide an appropriate testbed to demonstrate the robustness of a NN trained on feasible perturbed states. Moreover, these scenarios provide preliminary proof-of-concept for fully autonomous missions that execute maneuvers without dependence upon explicit command uplinks. As a result, the technological advancement proposed in this work may significantly ease the strain on ground-based mission operations. This would enable complex and autonomous mission execution in cislunar and deep space regimes, filling a technology gap required to support future manned missions.

NASA↗

Trajectory Design and Maneuver Performance of the OSIRIS-REx Low-Altitude Reconnaissance of Bennu

With more than a year of asteroid proximity operations, the OSIRIS-REx team was able to identify one primary and one backup site for sample collection. The next step was to finalize on-board, localized image libraries and site-specific terrain information prior to attempting sample acquisition. Collecting this information required additional, low-altitude asteroid flyby reconnaissance activities. These activities, referred to as ‘sorties’, involved special maneuver and trajectory designs, unique from any other OSIRIS-REx maneuver activity. In order to minimize time between flybys and decrease the total number of maneuvers required, this trajectory design departed from and returned to a frozen Sun-terminator plane orbit within the span of a few hours. This work discusses the trajectory design and performance of the four flybys that were used to collect key topographic science observations of the primary and backup sample sites, which helped lead to a successful sample collection.

Andrew Levine↗

Precision Closed-Loop Orbital Maneuvering System Design and Performance for the Magnetospheric Multiscale Formation

NASAs Magnetospheric Multiscale (MMS) mission successfully launched on March 13,2015 (UTC) consists of four identically instrumented spin-stabilized observatories that function as a constellation to study magnetic reconnection in space. The need to maintain sufficiently accurate spatial and temporal formation resolution of the observatories must be balanced against the logistical constraints of executing overly-frequent maneuvers on a small fleet of spacecraft. These two considerations make for an extremely challenging maneuver design problem. This paper focuses on the design elements of a 6-DOF spacecraft attitude control and maneuvering system capable of delivering the high-precision adjustments required by the constellation designers specifically, the design, implementation, and on-orbit performance of the closed-loop formation-class maneuvers that include initialization, maintenance, and re-sizing. The maneuvering control system flown on MMS utilizes a micro-gravity resolution accelerometer sampled at a high rate in order to achieve closed-loop velocity tracking of an inertial target with arc-minute directional and millimeter-per second magnitude accuracy. This paper summarizes the techniques used for correcting bias drift, sensor-head offsets, and centripetal aliasing in the acceleration measurements. It also discusses the on-board pre-maneuver calibration and compensation algorithms as well as the implementation of the post-maneuver attitude adjustments.

Maneuver and Attitude Dynamics↗

Precision Closed-Loop Orbital Maneuvering System Design and Performance for the Magnetospheric Multi-Scale Mission (MMS) Formation

NASA's Magnetospheric Multi-Scale (MMS) mission successfully launched on March 13, 2015 (UTC) consists of four identically instrumented spin-stabilized observatories that function as a constellation to study magnetic reconnection in space. The need to maintain sufficiently accurate spatial and temporal formation resolution of the observatories must be balanced against the logistical constraints of executing overly-frequent maneuvers on a small fleet of spacecraft. These two considerations make for an extremely challenging maneuver design problem. This paper focuses on the design elements of a 6-DOF spacecraft attitude control and maneuvering system capable of delivering the high-precision adjustments required by the constellation designers---specifically, the design, implementation, and on-orbit performance of the closed-loop formation-class maneuvers that include initialization, maintenance, and re-sizing. The maneuvering control system flown on MMS utilizes a micro-gravity resolution accelerometer sampled at a high rate in order to achieve closed-loop velocity tracking of an inertial target with arc-minute directional and millimeter-per-second magnitude accuracy. This paper summarizes the techniques used for correcting bias drift, sensor-head offsets, and centripetal aliasing in the acceleration measurements. It also discusses the on-board pre-maneuver calibration and compensation algorithms as well as the implementation of the post-maneuver attitude adjustments.

Determination and Control↗

Maneuver sequence design for the post-Jupiter leg of Pioneer Saturn

After passing the planet Jupiter in December 1974, Pioneer 11 is on a flight path on which it will encounter Saturn in late 1979. Following an uncorrected trajectory, the spacecraft would pass 2 million km behind Saturn. A sequence of midcourse maneuvers for modifying the Pioneer trajectory is discussed. The corrected flight path is to bring the spacecraft within 500,000 km of Saturn's satellite Titan. Attention is given to maneuver capabilities and constraints, the maneuver design concept, questions related to the selection of an interim aimpoint, and aspects of maneuver implementation.

Frauenholz, R. B.↗

Flight Test Experiment Design for Characterizing Stability and Control of Hypersonic Vehicles

A maneuver design method that is particularly well-suited for determining the stability and control characteristics of hypersonic vehicles is described in detail. Analytical properties of the maneuver design are explained. The importance of these analytical properties for maximizing information content in flight data is discussed, along with practical implementation issues. Results from flight tests of the X-43A hypersonic research vehicle (also called Hyper-X) are used to demonstrate the excellent modeling results obtained using this maneuver design approach. A detailed design procedure for generating the maneuvers is given to allow application to other flight test programs.

Morelli, Eugene A.↗

A full-potential theory analysis of the supersonic aerodynamics of a 60-deg delta wing-body configuration

Experimental spanwise pressure distributions for a 60-deg delta wing/body of approximate fineness ratio 7.6 have been obtained and compared to predictions using full-potential theory. Analysis was performed at Mach 1.6 for angles of attack in the range 0.8 to 10 deg, and for Mach numbers ranging from 1.4 to 1.8 at lift coefficients 0.3 and 0.4. The intent of the study was to examine an attached flow approach for maneuver wing design in the presence of a fuselage. For the Mach number, angle-of-attack conditions considered, the full-potential theory accurately modeled the pressure distributions provided the flow remained attached. By combining the full-potential theory results with an empirical shock-induced separation criterion, it was found that the onset of shock-induced separation can be predicted. The investigation showed that, if an attached-flow approach is used with an empirical method of indicating shock-induced separation, the full-potential method is capable of being used as an effective tool for designing maneuver wings.

Rose, O. C.↗

Rotor design for maneuver performance

A method of determining the sensitivity of helicopter maneuver performance to changes in basic rotor design parameters is developed. Maneuver performance is measured by the time required, based on a simplified rotor/helicopter performance model, to perform a series of specified maneuvers. This method identifies parameter values which result in minimum time quickly because of the inherent simplicity of the rotor performance model used. For the specific case studied, this method predicts that the minimum time required is obtained with a low disk loading and a relatively high rotor solidity. The method was developed as part of the winning design effort for the American Helicopter Society student design competition for 1984/1985.

Berry, John D.↗

Maneuver analysis

The maneuver design for Viking was accomplished in two phases. First, there was the preflight design and strategy development that was dictated by mission objectives and requirements. Orbit determination and maneuver execution accuracy statistics were used, together with propellant budget considerations, to determine specific maneuver requirements and strategies. The second phase of the maneuver design occurred in flight. The maneuver analyses that were performed in flight, the software that was employed, and the actual inflight results for the entire orbital phase of the nominal Viking Mission are described with emphasis on prelanding objectives and geometry considerations. The actual adaptive design and implementation of the maneuvers as the mission progressed are considered. This design process included the minimization of both propellant usage and the effects of maneuver execution errors, while complying with several mechanization constraints.

Mitchell, R. T.↗

Cassini-Huygens Maneuver Experience: Second Year of Saturn Tour

This paper documents the maneuver experience during the second year of the Cassini-Huygens mission at Saturn. Since Saturn arrival in July 2004, the Cassini orbiter has made many flybys of Titan and Saturn's icy satellites. From August 2005 to June 2006, there were 39 planned maneuvers designed to target Cassini to aimpoints near Titan, Hyperion, Dione, and Rhea. Highlights of this paper include maneuver designs and strategies, maneuver performance, maneuver cancellation rationales, and a new maneuver execution-error model based on maneuvers executed to date.

navigation↗

A supersonic maneuver wing designed for nonlinear attached flow

A wing designed using the concept of attached supercritical crossflow for supersonic maneuvering aircraft wings has been built and tested. The detailed wing shape was determined using nonlinear potential flow computational aerodynamics methods to obtain a specified target pressure distribution. The test results showed that the target pressures were essentially obtained and that the drag-due-to-lift values at maneuver lift coefficients were considerably less than those expected using linear theory design procedures. The paper provides a detailed description of the wing design and test, and an analysis of the results.

Mason, W. H.↗