Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mars architecture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

End to End Optimization of a Mars Hybrid Transportation Architecture

NASA’s Mars Study Capability Team (MSCT) is developing a reusable Mars hybrid transportation architecture in which both chemical and solar electric propulsion systems are used in a single vehicle design to send crew and cargo to Mars. This paper presents a new integrated framework that combines Earth departure/arrival, heliocentric trajectory, Mars orbit reorientation, and vehicle sizing into a single environment and solves the entire mission from beginning to end in an effort to find a globally optimized solution for the hybrid architecture.

Qu, Min↗
NASA NTRS2015

Lunar COTS: An Economical and Sustainable Approach to Reaching Mars

The NASA COTS (Commercial Orbital Transportation Services) Program was a very successful program that developed and demonstrated cost-effective development and acquisition of commercial cargo transportation services to the International Space Station (ISS). The COTS acquisition strategy utilized a newer model than normally accepted in traditional procurement practices. This new model used Space Act Agreements where NASA entered into partnerships with industry to jointly share cost, development and operational risks to demonstrate new capabilities for mutual benefit. This model proved to be very beneficial to both NASA and its industry partners as NASA saved significantly in development and operational costs while industry partners successfully expanded their market share of the global launch transportation business. The authors, who contributed to the development of the COTS model, would like to extend this model to a lunar commercial services program that will push development of technologies and capabilities that will serve a Mars architecture and lead to an economical and sustainable pathway to transporting humans to Mars. Over the past few decades, several architectures for the Moon and Mars have been proposed and studied but ultimately halted or not even started due to the projected costs significantly exceeding NASA's budgets. Therefore a new strategy is needed that will fit within NASA's projected budgets and takes advantage of the US commercial industry along with its creative and entrepreneurial attributes. The authors propose a new COTS-like program to enter into partnerships with industry to demonstrate cost-effective, cis-lunar commercial services, such as lunar transportation, lunar ISRU operations, and cis-lunar propellant depots that can enable an economical and sustainable Mars architecture. Similar to the original COTS program, the goals of the proposed program, being notionally referred to as Lunar Commercial Orbital Transfer Services (LCOTS) program will be to: 1) reduce development and operational costs by sharing costs with industry; 2) create new markets in cis-lunar space to further reduce operational costs; and 3) enable NASA to develop an affordable and economical exploration Mars architecture. The paper will describe a plan for a proposed LCOTS program, its potential impact to an eventual Mars architecture and its many benefits to NASA, commercial space industry and the US economy.

Lunar ISRU↗
NASA NTRS2000

Future Mars outpost architecture

This paper describes an outpost designed with the JPL Mars Long Range Planning Team's goals in mind. The design focuses on subsurface mapping and characterization, accomplished through seismic mapping and deep drilling.

outpost robotic Mars↗
NASA NTRS2000

Field Experiments with Planetary Surface Rovers: Lessons for Mars Mission Architecture

Over the last decade, a variety of field experiments have been performed that simulate operations of a rover on Mars. These, in combination with the Pathfinder experience, lead to a realistic assessment of rover mission capabilities and to recommendations for rover technology and mission architecture to improve the science return of Mars exploration. A table summarizes field experiments that represent a range of possible mission designs and operational strategies. The experiments varied by the type and quality of imaging systems and other instrumentation, the use of orbital and aerial imaging and spectroscopy, the communcation bandwidth and command strategy, and the distance traveled. All mission simulations were blind field tests operated by science teams whose interpretations were compared to field ground truth providing an assessment of the accuracy of remote science interpretations and a better understanding of where improvements are needed.

Stoker, Carol↗
NASA NTRS2019

Refactoring the Curiosity Rover's sample handling architecture on Mars

The Curiosity Mars rover sample handling hardware and software were architected assuming that end-to-end sampling operations would occur in a single rover position, from acquisition of a powdered sample with a scoop or drill, through to the cleaning out of all sample residue in the sample chain. However, after analysis of the first drilled samples in Yellowknife Bay, the science team wanted to iterate with additional experiments on Mars and in laboratories on Earth to better understand their results and increase the value of science returned. With the architecture as conceived, the time needed to do so was in direct competition with the exploration of other targets and satisfaction of success criteria during the prime mission.

Kuhn, Stephen↗
NASA NTRS2024

Development of a Single Level Assessment Module for Simulating the Human Factors Concept Trade Space

This paper is a synopsis of the design and development of the Single Level Assessment Module (SLAM), a habitation mockup aimed at simulating volumetric conditions for astronauts in transit to Mars. Utilizing repurposed materials to enable low cost and constrained by various other design requirements from its parent vehicle, the SLAM embodies a critical step towards understanding human/habitat dynamics and interactions within the framework of the Mars Transit Habitat (TH) concept trade space. The synopsis begins by outlining the design constraints and goals, focusing on material availability and functional area volume requirements. Through various 3D design solutions, the SLAM emerges as a versatile habitat prototype, capable of accommodating various functional areas within its reconfigurable framework. The construction phase is then explored, highlighting the practical challenges and solutions encountered in assembling the SLAM's components. From panel assembly to outfitting functional areas, the construction process demonstrates a methodical approach to realizing the habitat's design intent. Looking ahead, the paper outlines future work, emphasizing the SLAM's adaptability for analysis and its potential to inform the design trade space future habitation concepts across the Moon to Mars architecture. By incorporating hinges for reconfigurability and facilitating volume assessments, the SLAM emerges as a crucial tool in advancing NASA’s ability to assess focused habitation configurations in conjunction with the development of the Moon to Mars architecture. In conclusion, this paper showcases the iterative process of habitat design, from conceptualization to construction.

Keith Lindsey↗
NASA NTRS2006

Nuclear Thermal Propulsion Requirements Analysis of the ESAS Reference Human Mars Mission Architecture

The Nuclear Thermal Propulsion Mission and System Analysis (NTP MSA) Phase 2 Study was initiated by Marshall Space Flight Center’s (MSFC) Advanced Concepts Office (VP11) in December, 2005 in support of MSFC’s Nuclear Systems Office (VP31) NTP for Exploration Study. The Mission and Systems Analysis Study was task # 6 of a set of 14 tasks within the NTP for Exploration Study. The primary goal of the NTP MSA Phase 2 Study was to identify the range of potential NTP engine and vehicle requirements for NASA Exploration Systems Mission Directorate (ESMD) Mars human exploration reference mission.

mars↗
NASA NTRS2018

A Discussion of Integrated Life Support and In Situ Resource Utilization Architectures for Mars Surface Missions

Life support on the International Space Station is made possible by a combination of technologies to ensure the availability of clean water and air for the crew. Resources, including water and oxygen, are partially recovered and recycled; the balance is lost as waste either to space or incinerated during reentry into Earth's atmosphere. Frequent resupply cargo is provided to ISS to replace these lost resources. For missions beyond Low Earth Orbit, resupply becomes increasingly challenging both economically and logistically. To limit the need for these resupply missions, three options are available: increase the recovery and recycling of necessary materials, leverage in situ resources available for a given mission, or a combination of both. Here we discuss several basic life support and in situ resource utilization (ISRU) architectures, identify common technologies, propose possible integrated architectures, identify benefits of and challenges to varying levels of life support and ISRU integration, and discuss several considerations for technology commonality, dis-similar redundancy, and developmental overlap.

Abney, Morgan B.↗
NASA NTRS2022

The Mars 2020 Ground Data System Architecture

The Mars 2020 Mission’s primary objective is to collect 20 geographically unique samples during its prime mission of one and a quarter Martian years, or just over 2 Earth years. Mission planners determined the project needed to develop a system that would enable the operations team to analyze engineering and science data, make science decisions, select viable rover targets at a millimeter resolution and validate an uplink bundle for a car sized rover with more complex science instruments than any previous Mars surface mission. All this had to be done within a five hour time frame. Doing this with a small team would be a challenge, but this had to be accomplished by a large team of engineers and scientists located across North America and Europe. Achieving this level of operational efficiency was unheard of in the prime mission. In addition, the mission had another set of requirements that had nothing to do with surface operations; the Mars 2020 Ground Data System (GDS) was also expected to comply with a new set of security requirements to keep up with the ever changing cybersecurity landscape. The Mars 2020 Ground Data System (GDS) is a re-architected version of the Mars Science Laboratory GDS. The primary goal was to integrate the lessons learned from previous Mars surface missions, accommodate a set of new requirements and capabilities required to ensure mission success, and comply with a new set of cybersecurity controls. The new architecture includes several unique qualities including a data lake, language-agnostic system-wide event-based operations, containerization, automated deployment, network segmentation, infrastructure-as-code, API-driven interfaces, and the first Mars surface GDS to operate primarily in the cloud. The new architecture enabled greater access to the system’s data, tighter integration with the operations team, and a higher level of traceability. The availability of the data also enabled a new set of capabilities previously not possible on surface missions. These new capabilities include an autonomous data to information, pipeline for downlink analysis, horizontal scaling of science data processing capabilities, autonomous round trip data tracking of science and engineering data, integration of flight system state into the tactical planning cycle, high fidelity targeting utilizing kinematic data, and hierarchical image and 3d meshes data representations. This paper will introduce the requirements for the Mars 2020 Mission, the heritage architecture, and the rationale for the changes to achieve the new architecture. The paper will continue to describe the fundamental changes made to the GDS architecture, how these changes enabled a more tightly integrated GDS, and the new capabilities that were enabled by the new architecture. The paper will conclude with the lessons learned from the process of rearchitecting a heritage GDS system and from the first 200 days of operations supporting over 800 users from around the world.

Lopez-Roig, Reynaldo↗
NASA NTRS1991

Evolving earth-based and in-situ satellite network architectures for Mars communications and navigation support

Results of on-going studies to develop navigation/telecommunications network concepts to support future robotic and human missions to Mars are presented. The performance and connectivity improvements provided by the relay network will permit use of simpler, lower performance, and less costly telecom subsystems for the in-situ mission exploration elements. Orbiting relay satellites can serve as effective navigation aids by supporting earth-based tracking as well as providing Mars-centered radiometric data for mission elements approaching, in orbit, or on the surface of Mars. The relay satellite orbits may be selected to optimize navigation aid support and communication coverage for specific mission sets.

Hastrup, Rolf↗
NASA NTRS2018

The Moon as a Stepping Stone to Human Mars Missions

Human space mission designers stretching back to von Braun and beyond have envisioned the moon as a waypoint to the more challenging missions to Mars. The moon is seen as a potential proving ground for technologies, equipment and operations, and a venue upon which to learn the art of surface exploration. Mars missions are years in duration with very limited Earth return opportunities, but the moon provides the opportunity to perfect exploration concepts while being only a few days from Earth. Though the environment and gravity differ from Mars, and will thereby not provide a perfectly analogous environment, the remoteness, limited logistics, and harsh conditions on the Moon provide an environment that can be used to stress many systems that will be used or will be extensible to hardware and operations that will be used on Mars. This paper begins by describing the systems, or options for systems, that together comprise a human Mars architecture. With this human Mars operational concept as a basis of comparison, each of these systems is analyzed in the context of a range of potential exploration missions that first targets lunar exploration experience, examining how the lunar experience can be best used to prepare for the eventual human mission to Mars. The paper concludes with a concise summary of specific areas that have the strongest applicability between exploration experience on the lunar surface and extensibility to human Mars exploration.

Connolly, John F.↗