SEARCH · Search NASA

Results for “Marshall Islands”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

53 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

NASA Space Launch System Artemis I & II Post Flight Ascent Aerothermal Environments Overview

Since 2011 the Aerosciences Branch/EV33 at NASA Marshall Space Flight Center has been involved with the development of ascent external aerothermal environments for the NASA Space Launch System (SLS) Block 1 launch vehicle for the purposes of supporting thermal analysis and the design of thermal protection systems. The SLS Block 1 Artemis I and II launch vehicles successfully launched from Pad39B at NASA Kennedy Space Center on November 16th, 2022 and April 1st, 2026, respectively. Over 70 aerothermal islands, consisting of over 265 operational instruments captured aerodynamic heating and plume induced environments throughout the launch vehicles. Gauges consisted of calorimeters, radiometers, gas temperature probes, pressure transducers, bi-directional pressure probes and thermocouples. Prior to launch, aerothermal design environment models were generated to predict ascent aerodynamic heating and plume induced environments over a design space that covered a range of vehicle trajectories that varied atmospheric, vehicle performance, and off-nominal, engine-out conditions. Post flight reconstruction models were developed for each flight island using the Day-of-Launch (DOL) Best Equivalent Trajectory (BET) that provided freestream conditions and propulsion system boundary conditions. This paper discusses a summary of the ascent aerothermal environments observed during the flights and the respective modelling approaches and the performance of them through comparisons of flight data and predictions.

aerothermodynamics↗

NASA NTRS1971

Sounding rocket flight report, MUMP 9 and MUMP 10

The results of the launching of two-Marshall-University of Michigan Probes (MUMP 9 and MUMP 10), Nike-Tomahawk sounding rocket payloads, are summarized. The MUMP is similar to the thermosphere probe, an ejectable instrument package for studying the variability of the earth's atmospheric parameters. The MUMP 9 payload included an omegatron mass analyzer, a molecular fluorescence densitometer, a mini-tilty filter, and a lunar position sensor. This complement of instruments permitted the determination of the molecular nitrogen density and temperature in the altitude range from approximately 143 to 297 km over Wallops Island, Virginia, during January 1971. The MUMP 10 payload included an omegatron mass analyzer, an electron temperature probe, a cryogenic densitometer, and a solar position sensor. These instruments permitted the determination of the molecular nitrogen density and temperature and the charged particle density and temperature in the altitude range from approximately 145 to 290 km over Wallops Island during the afternoon preceding the MUMP 9 launch.

Grassl, H. J.↗

NASA NTRS2002

The Solar-Sail Launched Interstellar Probe: Pre-Perihelion Trajectories and Application of Holography

Design of missions beyond our solar system presents many challenges. Here, we consider certain aspects of the solar-sail launched interstellar probe (ISP), a spacecraft slated for launch in the 2010 time period that is planned to reach the heliopause, at 200 Astronomical Units (AU) from the Sun after a flight of about 20-years duration. The baseline mission under consideration by NASA / JPL has a sail radius of 200 m, a science payload of 25 kg, a spacecraft areal mass thickness of about two grams per square meter and is accelerated out of the solar system at about 14 AU per year after performing a perihelion pass of about 0.25 AU. In current plans, the sail is to be dropped near Jupiter's orbit (5.2 AU from the Sun) on the outbound trajectory leg. One aspect of this study is application of a realistic model of sail thermo-optics to sail kinematics that includes diffuse / specular reflectance and sail roughness. The effects of solar-wind degradation of sail material, based on recent measurements at the NASA MSFC (Marshall Space Flight Center) Space Environment Facility were incorporated in the kinematical model. After setting initial and final conditions for the spacecraft, trajectory was optimized using the provision of variable sail aspect angle. The second phase of the study included consideration of rainbow holography as a medium for a message plaque that would be carried aboard the ISP in the spirit of the message plaques aboard Pioneer 10 /11 and Voyager 1 /2. A prototype holographic message plaque was designed and created by artist C. Bangs with the assistance of Ana Maria Nicholson and Dan Schweitzer of the Center for Holographic Arts in Long Island City, NY. The piece was framed by Simon Liu Inc. of Brooklyn, NY. Concurrent to the creation of the prototype message plaque, we explored the potential of this medium to transmit large amounts of visual information to any extraterrestrial civilization that might detect and intercept ISP. It was also necessary to investigate possible degradation of holograms by the space environment. We developed a new way of characterizing the optical quality of holograms.

Gregory L. Matloff↗

NASA NTRS1976

Attenuation of propagation through rain for an earth-satellite path correlated with predicted values using radar

During the summer of 1974 and spring of 1975, measurements of attenuation of propagation through rain were made at Wallops Island, VA, using 13 and 18 GHz transmitters operating in the uplink mode toward the ATS-6 satellite. Simultaneously, rain reflectivity levels were measured along the earth-satellite path using a high resolution (0.4 deg beamwidth) S-band radar having a scanning antenna. Four rain-gages and two disdrometers were also located in the vicinity of the transmitters. The radar and disdrometer data were used in a modelling program to predict attenuation levels which were subsequently compared to the directly measured fades over nearly simultaneous time intervals. Predicted attenuation levels were obtained for three drop size distributions. Comparisons between predicted and measured attenuation levels showed the APL dropsize distribution gave the smallest rms difference of 1.3 dB at 13 and 18 GHz although the rms difference corresponding to Marshall-Palmer was close to this value. The good agreement suggests the validity of using radar to model path attenuation to obtain attenuation statistics.

Goldhirsh, J.↗

NASA NTRS1999

Rocket-Based Combined-Cycle Propulsion Technology for Access-to-Space Applications

NASA's Office of Aero-Space Technology (OAST) established three major goals, referred to as, "The Three Pillars for Success". The Advanced Space Transportation Program Office (ASTP) at the NASA's Marshall Space Flight Center (MSFC) in Huntsville, Ala. focuses on future space transportation technologies under the "Access to Space" pillar. One of the main activities over the past three years has been on advancing the hydrogen fueled rocket-based combined cycle (RBCC) technologies. The RBCC effort that was completed early this year was the initial step leading to flight demonstrations of the technology for space launch vehicle propulsion. Aerojet and Boeing-Rocketdyne designed, built and ground tested their RBCC engine concepts. In addition, ASTROX, Georgia Institute of Technology, McKinney Associates, Pennsylvania State University (PSU), and University of Alabama in Huntsville conducted supporting activities. The RBCC activity included ground testing of components (e.g., injectors, thrusters, ejectors and inlets) and integrated flowpaths. Inlet testing was performed at the Lewis Research Center's 1 x 1 wind tunnel. All direct connect and free-jet engine testing were conducted at the GASL facilities on Long Island, New York. Testing spanned the Mach range from sea level static to Mach 8. Testing of the rocket-only mode, simulating the final phase of the ascent mission profile, was also performed. The originally planned work on these contracts was completed in 1999. Follow-on activities have been initiated for both hydrogen and hydrocarbon fueled RBCC concepts. Studies to better understand system level issues with the integration of RBCC propulsion with earth-to-orbit vehicles have also been conducted. This paper describes the status, progress and future plans of the RBCC activities funded by NASA/MSFC with a major focus on the benefits of utilizing air-breathing combined-cycle propulsion in access-to-space applications.

Hueter, Uwe↗

NASA NTRS1987

Design description report for a photovoltaic power system for a remote satellite earth terminal

A photovoltaic (PV) power system has been installed as an adjunct to an agricultural school at Wawatobi on the large northern island of the Republic of Indonesia. Its purpose is to provide power for a satellite earth station and a classroom. The renewable energy developed supports the video and audio teleconferencing systems as well as the facility at large. The ground station may later be used to provide telephone service. The installation was made in support of the Agency for International Development's Rural Satellite Program, whose purpose is to demonstrate the use of satellite communications for rural development assistance applications. The objective of this particular PV power system is to demonstrate the suitability of a hybrid PV engine-generator configuration for remote satellite earth stations.

Marshall, N. A.↗

NASA NTRS2000

Remote Sensing of Wind Fields and Aerosol Distributions with Airborne Scanning Doppler Lidar

The coherent Doppler lidar, when operated from an airborne platform, offers a unique measurement capability for study of atmospheric and surface processes and feature. This is especially true for scientific objectives requiring measurements in optically-clear air, where other remote sensing technologies such as Doppler radar are at a disadvantage in terms of spatial resolution and coverage. The atmospheric lidar remote sensing groups of several US institutions, led by Marshall Space Flight Center, have developed an airborne coherent Doppler lidar capable of mapping the wind field and aerosol structure in three dimensions. The instrument consists of about a 1 Joule/pulse (eyesafe) lidar transceiver, telescope, scanner, inertial measurement unit, and operations control system to orchestrate all subsystem functions and tasks. The scanner is capable of directing the expanded lidar beam in a variety of ways, in order to extract vertically resolved wind fields. Horizontal resolution is about 1 km; vertical resolution is even finer. Winds are obtained by measuring backscattered, Doppler-shifted laser radiation from naturally-occurring aerosol particles (on an order of 1 micron in diameter). Measurement coverage depends on aerosol spatial distribution and concentration. Velocity accuracy has been verified to be about 1 m/s. A variety of applications has been demonstrated during the three flight campaigns conducted during 1995-1998. Examples will be shown during the presentation. In 1995, boundary layer winds over the ocean were mapped with unprecedented resolution. In 1996, unique measurements were made of flow over the complex terrain of the Aleutian Islands; interaction of the marine boundary layer jet with the California coastal mountain range; a weak dry line in Texas - New Mexico; an upper tropospheric jet stream; the angular dependence of sea surface scattering; and in-flight radiometric calibration using the surface of White Sands National Monument. In 1998, the first measurements of eyewall and boundary layer winds within a hurricane were made with the airborne Doppler lidar. Potential future applications, and plans for improvements, will also be identified.

Rothermel, Jeffry↗

NASA NTRS2001

Remote Sensing of Wind Fields and Aerosol Distribution with Airborne Scanning Doppler Lidar

The coherent Doppler laser radar (lidar), when operated from an airborne platform, is a unique tool for the study of atmospheric and surface processes and features. This is especially true for scientific objectives requiring measurements in optically-clear air, where other remote sensing technologies such as Doppler radar are typically at a disadvantage. The atmospheric lidar remote sensing groups of several US institutions, led by Marshall Space Flight Center, have developed an airborne coherent Doppler lidar capable of mapping the wind field and aerosol structure in three dimensions. The instrument consists of an eye-safe approx. 1 Joule/pulse lidar transceiver, telescope, scanner, inertial measurement unit, and flight computer system to orchestrate all subsystem functions and tasks. The scanner is capable of directing the expanded lidar beam in a variety of ways, in order to extract vertically-resolved wind fields. Horizontal resolution is approx. 1 km; vertical resolution is even finer. Winds are obtained by measuring backscattered, Doppler-shifted laser radiation from naturally-occurring aerosol particles (of order 1 micron diameter). Measurement coverage depends on aerosol spatial distribution and composition. Velocity accuracy has been verified to be approx. 1 meter per second. A variety of applications have been demonstrated during the three flight campaigns conducted during 1995-1998. Examples will be shown during the presentation. In 1995, boundary layer winds over the ocean were mapped with unprecedented resolution. In 1996, unique measurements were made of. flow over the complex terrain of the Aleutian Islands; interaction of the marine boundary layer jet with the California coastal mountain range; a weak dry line in Texas - New Mexico; the angular dependence of sea surface scattering; and in-flight radiometric calibration using the surface of White Sands National Monument. In 1998, the first measurements of eyewall and boundary layer winds within a hurricane were made with the airborne Doppler lidar. Potential applications and plans for improvement will also be described.

Rothermel, Jeffry↗

NASA NTRS2001

An Investigation of the Influence of Urban Areas on Rainfall Using a Cloud-Mesoscale Model and the TRMM Satellite

A recent paper by Shepherd and Pierce (conditionally accepted to Journal of Applied Meteorology) used rainfall data from the Precipitation Radar on NASA's Tropical Rainfall Measuring Mission's (TRMM) satellite to identify warm season rainfall anomalies downwind of major urban areas. A convective-mesoscale model with extensive land-surface processes is employed to (a) determine if an urban heat island (UHI) thermal perturbation can induce a dynamic response to affect rainfall processes and (b) quantify the impact of the following three factors on the evolution of rainfall: (1) urban surface roughness, (2) magnitude of the UHI temperature anomaly, and (3) physical size of the UHI temperature anomaly. The sensitivity experiments are achieved by inserting a slab of land with urban properties (e.g. roughness length, albedo, thermal character) within a rural surface environment and varying the appropriate lower boundary condition parameters. Early analysis suggests that urban surface roughness (through turbulence and low-level convergence) may control timing and initial location of UHI-induced convection. The magnitude of the heat island appears to be closely linked to the total rainfall amount with minor impact on timing and location. The physical size of the city may predominantly impact on the location of UHI-induced rainfall anomaly. The UHI factor parameter space will be thoroughly investigated with respect to their effects on rainfall amount, location, and timing. This study extends prior numerical investigations of the impact of urban surfaces on meteorological processes, particularly rainfall development. The work also contains several novel aspects, including the application of a high-resolution (less than I km) cloud-mesoscale model to investigate urban-induce rainfall process; investigation of thermal magnitude of the UHI on rainfall process; and investigation of UHI physical size on rainfall processes.

Shepherd, J. Marshall↗

NASA NTRS2002

An Investigation of the Influence of Urban Areas on Rainfall Using the TRMM Satellite and a Cloud-Mesoscale Model

A recent paper by Shepherd and Pierce (in press at Journal of Applied Meteorology) used rainfall data from the Precipitation Radar on NASA's Tropical Rainfall Measuring Mission's (TRMM) satellite to identify warm season rainfall anomalies downwind of major urban areas. Data (PR) were employed to identify warm season rainfall (1998-2000) patterns around Atlanta, Montgomery, Nashville, San Antonio, Waco, and Dallas. Results reveal an average increase of approx. 28% in monthly rainfall rates within 30-60 kilometers downwind of the metropolis with a modest increase of 5.6% over the metropolis. Portions of the downwind area exhibit increases as high as 51%. The percentage changes are relative to an upwind control area. It was also found that maximum rainfall rates in the downwind impact area exceeded the mean value in the upwind control area by 48%-116%. The maximum value was generally found at an average distance of 39 km from the edge of the urban center or 64 km from the center of the city. Results are consistent with METROMEX studies of St. Louis almost two decades ago and with more recent studies near Atlanta. A convective-mesoscale model with extensive land-surface processes is currently being employed to (a) determine if an urban heat island (UHI) thermal perturbation can induce a dynamic response to affect rainfall processes and (b) quantify the impact of the following three factors on the evolution of rainfall: (1) urban surface roughness, (2) magnitude of the UHI temperature anomaly, and (3) physical size of the UHI temperature anomaly. The sensitivity experiments are achieved by inserting a slab of land with urban properties (e.g. roughness length, albedo, thermal character) within a rural surface environment and varying the appropriate lower boundary condition parameters. The study will discuss the feasibility of utilizing satellite-based rainfall estimates for examining rainfall modification by urban areas on global scales and over longer time periods. The talk also introduces very preliminary results from the modeling component of the study. Such research has implications for weather forecasting, urban planning, water resource management, and understanding human impact on the environment and climate.

Shepherd, J. Marshall↗

NASA NTRS2016

The Effect of Laser Scan Strategy on Distortion and Residual Stresses of Arches Made With Selective Laser Melting

The NASA Marshall Space Flight Center (MSFC) is developing Additive Manufacturing (AM) - both in-space AM for on-demand parts, tools, or structures, and on-earth AM for rapid, reduced-cost, small volume production of complex space-flight hardware. Selective Laser Melting (SLM) is an on-earth AM technology that MSFC is using to build Alloy 718 rocket engine components. An understanding of the SLM-718 material properties is required to design, build, and qualify these components for space flight. Residual stresses and are of particular interest for this AM process, since SLM is a series of approximately 100 micron-wide welds, where highly non-linear heating and cooling, severe thermal gradients and repeated thermal cycling can result in high residual stresses within the component. These stresses may cause degraded material properties, and warp or distort the geometry of the SLM component. The distortions can render the component out-of-tolerance when inspected, and even interrupt or halt the build process if the warped material prevents the SLM machine from operating properly. The component must be scrapped and re-designed, which is time consuming and costly. If residual stresses are better understood, and can be predicted, these effects can be mitigated early in the component's design. the compressive residual stresses in the z-direction were highest in the chess sample, followed by island then continuous. This may be due to the binding nature of the segments

Bagg, Stacey D.↗

NASA NTRS2002

Detection of Urban-Induced Rainfall Anomalies in Houston, Texas: A New Perspective from Space

Urban heat islands (UHIs) are caused by the heat-retaining properties of surfaces usually found in urban cities like asphalt and concrete. The UHI can typically be observed on the evening TV weather map as warmer temperatures over the downtown of major cities and cooler temperatures in the suburbs and surrounding rural areas. The UHI has now become a widely acknowledged, observed, and researched phenomenon because of its broad environmental and societal implications. Interest in the UHI will intensify in the future as existing urban areas expand and rural areas urbanize. By the year 2025, more than 60% of the world's population will live in cities, with higher percentages expected in developed nations. The urban growth rate in the United States, for example, is estimated to be 12.5%, and the recent 2000 Census found that more than 80% of the population currently lives in urban areas. Furthermore, the U.S. population is not only growing but is tending to concentrate more in urban areas within the environmentally sensitive coastal zones. Urban growth creates unique and often contentious issues for policymakers related to land use zoning, transportation planning, agricultural production, housing and development, pollution, and natural resources protection. Urban expansion and its associated UHIs also have measurable impacts on weather and climate processes. The UHI has been documented to affect local and regional temperature, wind patterns, and air quality.

Shepherd, J. Marshall↗

NASA NTRS2002

Detection of Urban-Induced Rainfall Anomalies in a Major Coastal City

Urban heat islands (UHIs) are caused by the heat-retaining properties of surfaces usually found in urban cities like asphalt and concrete. The UHI can typically be observed on the evening TV weather map as warmer temperatures over the downtown of major cities and cooler temperatures in the suburbs and surrounding rural areas. The UHI has now become a widely acknowledged, observed, and researched phenomenon because of its broad environmental and societal implications. Interest in the UHI will intensify in the future as existing urban areas expand and rural areas urbanize. By the year 2025, more than 60% of the world s population will live in cities, with higher percentages expected in developed nations. The urban growth rate in the United States, for example, is estimated to be 12.5%, and the recent 2000 Census found that more than 80% of the population currently lives in urban areas. Furthermore, the U.S. population is not only growing but is tending to concentrate more in urban areas within the environmentally sensitive coastal zones. Urban growth creates unique and often contentious issues for policymakers related to land use zoning, transportation planning, agricultural production, housing and development, pollution, and natural resources protection. Urban expansion and its associated TJHIs also have measurable impacts on weather and climate processes. The UHI has been documented to affect local and regional temperature, wind patterns, and air quality

Shepherd, J. Marshall↗

NASA NTRS2003

A Dynamic Optimization Technique for Siting the NASA-Clark Atlanta Urban Rain Gauge Network (NCURN)

NASA satellites and ground instruments have indicated that cities like Atlanta, Georgia may create or alter rainfall. Scientists speculate that the urban heat island caused by man-made surfaces in cities impact the heat and wind patterns that form clouds and rainfall. However, more conclusive evidence is required to substantiate findings from satellites. NASA, along with scientists at Clark Atlanta University, are implementing a dense, urban rain gauge network in the metropolitan Atlanta area to support a satellite validation program called Studies of PRecipitation Anomalies from Widespread Urban Landuse (SPRAWL). SPRAWL will be conducted during the summer of 2003 to further identify and understand the impact of urban Atlanta on precipitation variability. The paper provides an. overview of SPRAWL, which represents one of the more comprehensive efforts in recent years to focus exclusively on urban-impacted rainfall. The paper also introduces a novel technique for deploying rain gauges for SPRAWL. The deployment of the dense Atlanta network is unique because it utilizes Geographic Information Systems (GIS) and Decision Support Systems (DSS) to optimize deployment of the rain gauges. These computer aided systems consider access to roads, drainage systems, tree cover, and other factors in guiding the deployment of the gauge network. GIS and DSS also provide decision-makers with additional resources and flexibility to make informed decisions while considering numerous factors. Also, the new Atlanta network and SPRAWL provide a unique opportunity to merge the high-resolution, urban rain gauge network with satellite-derived rainfall products to understand how cities are changing rainfall patterns, and possibly climate.

Shepherd, J. Marshall↗

NASA NTRS2002

The Impact of Urbanization on the Precipitation Component of the Water Cycle: A New Perspective

It is estimated that by the year 2025, 60% of the world s population will live in cities (UNFP, 1999). As cities continue to grow, urban sprawl (e.g., the expansion of urban surfaces outward into rural surroundings) creates unique problems related to land use, transportation, agriculture, housing, pollution, and development. Urban expansion also has measurable impacts on environmental processes. Urban areas modify boundary layer processes through the creation of an urban heat island (UHI). The literature indicates that the signature of the urban heat island effect may be resolvable in rainfall patterns over and downwind of metropolitan areas. However, a recent U.S. Weather Research Program panel concluded that more observational and modeling research is needed in this area (Dabberdt et al. 2000). NASA and other agencies initiated programs such as the Atlanta Land-use Analysis: Temperature and Air Quality Project (ATLANTA) (Quattrochi et al. 1998) which aimed to identify and understand how urban heat islands impact the environment. However, a comprehensive assessment of the role of urban-induced rainfall in the global water and energy cycle (GWEC) and cycling of freshwater was not a primary focus of these efforts. NASA's Earth Science Enterprise (ESE) seeks to develop a scientific understanding of the Earth system and its response to natural or human-induced changes to enable improved prediction capability for climate, weather, and natural hazards (NASA, 2000). Within this mission, the ESE has three basic thrusts: science research to increase Earth system knowledge; an applications program to transfer science knowledge to practical use in society; and a technology program to enable new, better, and cheaper capabilities for observing the earth. Within this framework, a research program is underway to further address the co-relationship between land cover use and change (e.g. urban development) and its impact on key components of the GWEC (e.g., precipitation). This presentation discusses the feasibility of using the TRMM or GPM satellite to identify precipitation anomalies likely caused by urbanization (Shepherd et al. 2002). Recent results from analyses of TRMM data around several major U.S. cities (e.g. Dallas, Atlanta, Houston) will be discussed. The presentation also summarizes a NASA-funded research effort to investigate the phenomenon of urban-induced precipitation anomalies using TRMM (future GPM) satellite-based remote sensing, an intensive ground observation/validation effort near Atlanta, and coupled atmosphere-land numerical modeling techniques.

Shephard, J. Marshal↗

NASA NTRS2002

An Investigation of the Influence of Urban Areas on Rainfall Using a Cloud-Mesoscale Model and TRMM Satellite

The urban heat island (UHI) has become a widely acknowledged, observed, and researched phenomena because of its broad implications. It is estimated that by the year 2025, 80% of the world's population will live in cities (UNFP, 1999). The UHI has been documented in the literature to affect local and regional temperature distributions, wind patterns and air quality. The UHI can also impact the development of clouds and precipitation in and around cities. This paper will focus primarily on the UHI's impact on precipitation. In the past 30 years, several observational and climatological studies have theorized that the UHI can have a significant influence on mesoscale circulations and resulting precipitation (see Shepherd et al. 2002 for a thorough review). More recent studies have continued to validate and extend the findings from pre and post-METROMEX investigations. Shepherd et al. (2002) was one of the first (and possibly the first) attempts to identify rainfall modification by urban areas using satellite-based rainfall measurements. Using a 15-month (spanning three years) analysis of mean rainfall rates, the cities of Atlanta, Montgomery, Dallas, Waco, and San Antonio were examined. Shepherd et al. (2002) found that the average percentage increase in mean rainfall rate in a hypothesized "downwind maximum impact area" over an "upwind control area" was 28.4% with a range of 14.6 to 51%. The typical distance of the downwind rainfall rate anomaly from the urban center was 30-60 km, consistent with earlier studies. This fact provides confidence that UHI-rainfall effects are real and detectable by TRMM satellite estimates.

Shepherd, J. Marshall↗

NASA NTRS2002

A Downscaling Analysis of the Urban Influence on Rainfall: TRMM Satellite Component AMS Conference on Satellite Meteorology and Oceanography

A recent publication by Shepherd et al. (2002) demonstrated the feasibility of using TRMM precipitation radar (PR) estimates to identify precipitation anomalies caused by urbanization. The approach is particularly useful for investigating this global process because TRMM data span large portions of the globe and comprise an extended temporal dataset. Recent literature suggests that urbanized regions of Houston, Texas may be influencing lightning and precipitation formation over and downwind of the city. Possible mechanisms include: (1) enhanced convergence through interactions between the sea breeze, Galveston bay breeze, and urban heat island circulations, (2) enhanced convergence due to increased surface roughness over the city and/or destabilization of the boundary layer by the UHI, or (3) enhanced cloud condensation nuclei due to urban and industrial aerosol sources. In this study, a downscaling analysis of spatial and temporal trends in rainfall around the Houston Area is being conducted. The downscaling analysis concept involves identifying and quantifying urban rainfall anomalies at progressively smaller spatial and temporal scales using the TRMM satellite, ground-based radar, and a dense network of rain gauges. The goal is to test the hypothesis that the Houston urban district and regions in the climatological downwind region of the city exhibit enhanced rainfall amounts relative to the climatological upwind regions. TRMM was launched in 1997 and currently operates in a low-inclination (35 deg), non-sun-synchronous orbit at an altitude of 402 km (350 km prior to August 2001). The satellite analysis follows the methodologies described in Shepherd et al. (2002). Nearly five years of TRMM PR-derived mean monthly rainfall estimates are utilized to produce annual and warm season isohyetal analyses around Houston. Early results indicate that rainfall rates (mm/h) for the entire period are largest within 100 km northeast and east of Houston (e.g. the "hypothesized downwind region"). The mean rainfall rate over the Houston urban center is 30.5% larger than the upwind control region. The mean rainfall rate in the downwind region is 34.4% larger than the upwind region. An analysis of a parameter called the urban rainfall ratio (URR) illustrates that 65% (88%) of the satellite-derived rainfall rates in the downwind (upwind control) region are greater (less) than the mean background rainfall rate of the entire study region. When the data is stratified by summer months from 1998 to 2001 (June-August), even greater influence over and downwind of the urban area is observed in the statistics. This result is consistent with published reports of urban-generated rainfall being more prevalent in the warm season. The research demonstrates that the evolving TRMM satellite climatology is a credible way to detect mesoscale precipitation signatures that may be linked to urbanization. Early results also corroborate recent findings on Houston-induced convection/drainfall anomalies. Burian and Shepherd will report on other aspects of the downscaling analysis in future forums, but early rain gauge results are consistent with the satellite-based observations.

Shepherd, J. Marshall↗