SEARCH · Search NASA
Results for “Material flows”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Material flow visualization during friction stir welding using high-speed X-ray imaging
Not Available
Life cycle energy and material flow implications of gypsum plasterboard recycling in the European Union
Not Available
System Dynamics Modeling of Indium Material Flows under Wide Deployment of Clean Energy Technologies
Not Available
Heat transfer and material flow during laser assisted multi-layer additive manufacturing
A three-dimensional, transient, heat transfer, and fluid flow model is developed for the laser assisted multilayer additive manufacturing process with coaxially fed austenitic stainless steel powder. Heat transfer between the laser beam and the powder particles is considered both during their flight between the nozzle and the growth surface and after they deposit on the surface. The geometry of the build layer obtained from independent experiments is compared with that obtained from the model. The spatial variation of melt geometry, cooling rate, and peak temperatures is examined in various layers. The computed cooling rates and solidification parameters are used to estimate the cell spacings and hardness in various layers of the structure. Good agreement is achieved between the computed geometry, cell spacings, and hardness with the corresponding independent experimental results.
Tracing Material Flow Paths in Friction Stir Welds
Heat and mechanical work are coupled in the friction stir welding process. The process variables are RPM, translational weld speed, and downward plunge force. The strain-temperature history of a metal element at each point on the cross-section of the weld is determined by the process variables plus the individual flow path taken by the particular filament of metal flowing around the tool and ending on flat point. The strain-temperature history determines the properties of a metal element on the weld cross-section. The strain-temperature history is carefully controlled in metal processes where direct control is feasible. Indirect estimates of the flow paths and the strain-temperature histories of filaments comprising friction stir welds can be made from a model, if the model is good enough. This paper describes marker studies of flow path geometries for various process parameters. Observed geometries are compared with geometries estimated from models.
Using Throughput, Reliability, Availability, and Maintainability (TRAM) Methodology to Predict and Relieve Gridlock in Process Plant Material Flow
No abstract prepared.
Pagosa: a multi-dimensional, multi-material parallel hydrodynamics code for material flow and deformation (u)
Abstract Not Provided
Material flow during friction stir welding: A thermo-mechanically fully coupled CFD study
Explore the source record for details and available documents.
Increased material flow throughput in large scale additive manufacturing through movable segmented build platform
An assembly for additive manufacturing includes a build housing including a base, a print head, and a print head support connected to the base for supporting the print head above the base. A driver system is provided for moving the print head and the base relative to one another. A build platform comprising a build support and at least one platen. The build support can be detachably engageable to the housing. The platens can be detachably engageable to the build support. The build support can include registration structure for registering the position of the build support relative to the build housing. A method of additive manufacturing is also disclosed.
Flow and arrest in stressed granular materials
Flowing granular materials often abruptly arrest if not driven by sufficient applied stresses. Such abrupt cessation of motion can be economically expensive in industrial materials handling and processing, and is significantly consequential in intermittent geophysical phenomena such as landslides and earthquakes. Using discrete element simulations, we calculate states of steady flow and arrest for granular materials under the conditions of constant applied pressure and shear stress, which are also most relevant in practice. Here the material can dilate or compact, and flow or arrest, in response to the applied stress. Our simulations highlight that under external stress, the intrinsic response of granular materials is characterized by uniquely-defined steady states of flow or arrest, which are highly sensitive to interparticle friction. While the flowing states can be equivalently characterized by volume fraction, coordination number or internal stress ratio, to characterize the states of shear arrest, one needs to also consider the structural anisotropy in the contact network. Here, we highlight the role of dilation in the flow-arrest transition, and discuss our findings in the context of rheological transitions in granular materials.
Flow and fracture of viscoelastic materials.
Flow fracture and rheological properties of viscoelastic material under biaxial loading
Material and Energy Flows in the Materials Production, Assembly, and End-of-Life Stages of the Automotive Lithium-Ion Battery Life Cycle
This document contains material and energy flows for lithium-ion batteries with an active cathode material of lithium manganese oxide (LiMn 2 O 4 ). These data are incorporated into Argonne National Laboratory's Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model, replacing previous data for lithium-ion batteries that are based on a nickel/cobalt/manganese (Ni/Co/Mn) cathode chemistry. To identify and determine the mass of lithium-ion battery components, we modeled batteries with LiMn 2 O 4 as the cathode material using Argonne's Battery Performance and Cost (BatPaC) model for hybrid electric vehicles, plug-in hybrid electric vehicles, and electric vehicles. As input for GREET, we developed new or updated data for the cathode material and the following materials that are included in its supply chain: soda ash, lime, petroleum-derived ethanol, lithium brine, and lithium carbonate. Also as input to GREET, we calculated new emission factors for equipment (kilns, dryers, and calciners) that were not previously included in the model and developed new material and energy flows for the battery electrolyte, binder, and binder solvent. Finally, we revised the data included in GREET for graphite (the anode active material), battery electronics, and battery assembly. For the first time, we incorporated energy and material flows for battery recycling into GREET, considering four battery recycling processes: pyrometallurgical, hydrometallurgical, intermediate physical, and direct physical. Opportunities for future research include considering alternative battery chemistries and battery packaging. As battery assembly and recycling technologies develop, staying up to date with them will be critical to understanding the energy, materials, and emissions burdens associated with batteries.
Material and Energy Flows in the Materials Production, Assembly, and End-of-Life Stages of the Automotive Lithium-Ion Battery Life Cycle
This document contains material and energy flows for lithium-ion batteries with an active cathode material of lithium manganese oxide (LiMn₂O₄). These data are incorporated into Argonne National Laboratory’s Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model, replacing previous data for lithium-ion batteries that are based on a nickel/cobalt/manganese (Ni/Co/Mn) cathode chemistry. To identify and determine the mass of lithium-ion battery components, we modeled batteries with LiMn₂O₄ as the cathode material using Argonne’s Battery Performance and Cost (BatPaC) model for hybrid electric vehicles, plug-in hybrid electric vehicles, and electric vehicles. As input for GREET, we developed new or updated data for the cathode material and the following materials that are included in its supply chain: soda ash, lime, petroleum-derived ethanol, lithium brine, and lithium carbonate. Also as input to GREET, we calculated new emission factors for equipment (kilns, dryers, and calciners) that were not previously included in the model and developed new material and energy flows for the battery electrolyte, binder, and binder solvent. Finally, we revised the data included in GREET for graphite (the anode active material), battery electronics, and battery assembly. For the first time, we incorporated energy and material flows for battery recycling into GREET, considering four battery recycling processes: pyrometallurgical, hydrometallurgical, intermediate physical, and direct physical. Opportunities for future research include considering alternative battery chemistries and battery packaging. As battery assembly and recycling technologies develop, staying up to date with them will be critical to understanding the energy, materials, and emissions burdens associated with batteries.
Entrance flows of polymeric materials - Pressure drop and flow patterns
Polymeric materials flow at tube entrance, discussing pressure drop and flow birefringent patterns at tapered and sharp entrances
Energy & Materials Resource Flows
This poster presents on flows of resources that support manufacturing, including flows of energy and materials. It highlights the recent and current strategic analysis efforts such as energy and carbon footprints, case studies showing the interconnectedness between sectors and global perspective and competitiveness, NREL's Materials Flows through Industry (MFI) tool; and our big impact report on Sustainable Manufacturing and Circular Economy.
Organic anolyte materials for flow batteries
Organic anolyte materials for redox flow batteries and redox flow batteries containing organic anolyte materials are disclosed.