Search NASA⌕ Search

SEARCH · Search NASA

Results for “Maximum Entropy Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Phase transformation of Ca{sub 4}[Al{sub 6}O{sub 12}]SO{sub 4} and its disordered crystal structure at 1073 K

The phase transformation of Ca{sub 4}[Al{sub 6}O{sub 12}]SO{sub 4} and the crystal structure of its high-temperature phase were investigated by differential thermal analysis, temperature-dependent Raman spectroscopy and high-temperature X-ray powder diffraction (CuKα{sub 1}). We determined the starting temperature of the orthorhombic-to-cubic transformation during heating (=711 K) and that of the reverse transformation during cooling (=742 K). The thermal hysteresis was negative (=−31 K), suggesting the thermoelasticity of the transformation. The space group of the high temperature phase is I4{sup ¯}3m with the unit-cell dimensions of a=0.92426(2) nm and V=0.78955(2) nm{sup 3} (Z=2) at 1073 K. The initial structural model was derived by the direct methods and further refined by the Rietveld method. The final structural model showed the orientational disordering of SO{sub 4} tetrahedra. The maximum-entropy method-based pattern fitting method was used to confirm the validity of the split-atom model, in which conventional structure bias caused by assuming intensity partitioning was minimized. At around the transformation temperature during heating, the vibrational spectra, corresponding to the Raman-active SO{sub 4} internal stretching mode, showed the continuous and gradual change in the slope of full width at half maximum versus temperature curve. This strongly suggests that the orthorhombic-to-cubic phase transformation would be principally accompanied by the statistical disordering in orientation of the SO{sub 4} tetrahedra, without distinct dynamical reorientation. - Graphical abstract: (Left) Three-dimensional electron-density distributions of the SO{sub 4} tetrahedron with the split-atom model, and (right) a bird's eye view of electron densities on the plane parallel to (111). - Highlights: • Crystal structure of Ca{sub 4}[Al{sub 6}O{sub 12}]SO{sub 4} at 1073 K is determined by powder XRD. • The atom arrangements are represented by the split-atom model. • The MPF method is used to confirm the validity of the model. • The phase transition is accompanied by orientational disordering of SO{sub 4} tetrahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Maximum Entropy Theory of Multiscale Coarse-Graining via Matching Thermodynamic Forces: Application to a Molecular Crystal (TATB)

The MSCG/FM (multiscale coarse-graining via force-matching) approach is an efficient supervised machine learning method to develop microscopically informed coarse-grained (CG) models. Here we present a theory based on the principle of maximum entropy (PME) enveloping the existing MSCG/FM approaches. This theory views the MSCG/FM method as a special case of matching the thermodynamic forces from the extended ensemble described by the set of thermodynamic (relevant) system coordinates. This set may include CG coordinates, the stress tensor, applied external fields, and so forth, and may be characterized by nonequilibrium conditions. Following the presentation of the theory, we discuss the consistent matching of both bonded and nonbonded interactions. The proposed PME formulation is used as a starting point to extend the MSCG/FM method to the constant strain ensemble, which together with the explicit matching of the bonded forces is better suited for coarse-graining anisotropic media at a submolecular resolution. The theory is demonstrated by performing the fine coarse-graining of crystalline 1,3,5-triamino-2,4,6-trinitrobenzene (TATB), a well-known insensitive molecular energetic material, which exhibits highly anisotropic mechanical properties.

1,3,5-triamino-2,4,6-trinitrobenzene↗
DOE OSTI2016

Spectral splitting optimization for high-efficiency solar photovoltaic and thermal power generation

Utilizing the full solar spectrum is desirable to enhance the conversion efficiency of a solar power generator. In practice, this can be achieved through spectral splitting between multiple converters in parallel. However, it is unclear which wavelength bands should be directed to each converter in order to maximize the efficiency. We developed a model of an ideal hybrid solar converter which utilizes both a single-junction photovoltaic cell and a thermal engine. We determined the limiting efficiencies of this hybrid strategy and the corresponding optimum spectral bandwidth directed to the photovoltaic cell. This optimum width is inversely proportional to the thermal engine efficiency and scales with the bandgap of the photovoltaic cell. This bandwidth was also obtained analytically through an entropy minimization scheme and matches well with our model. We show that the maximum efficiency of the system occurs when it minimizes the spectral entropy generation. This concept can be extended to capture generalized non-idealities to increase the usefulness of this technique for a range of full solar spectrum utilization technologies.

14 SOLAR ENERGY↗
DOE OSTI2018

Anisotropic magnetocaloric effect in single crystals of CrI 3

We report a systematic investigation of dc magnetization and ac susceptibility, as well as anisotropic magnetocaloric effect in bulk CrI 3 single crystals. A second-stage magnetic transition was observed just below the Curie temperature T c , indicating a two-step magnetic ordering. The low temperature thermal demagnetization could be well fitted by the spin-wave model rather than the single-particle model, confirming its localized magnetism. The maximum magnetic entropy change -ΔS$max\atop{M}$ ~5.65 J kg -1 K -1 and the corresponding adiabatic temperature change ΔT ad ~2.34 K are achieved from heat capacity analysis with the magnetic field up to 9 T. Anisotropy of ΔS M (T,H) was further investigated by isothermal magnetization, showing that the difference of -ΔS$max\atop{M}$ between the $ab$ plane and the c axis reaches a maximum value ~1.56 J kg -1 K -1 with the field change of 5 T. In conclusion, with the scaling analysis of ΔS M , the rescaled ΔS M (T,H) curves collapse onto a universal curve, indicating a second-order type of the magnetic transition. Furthermore, the -ΔS$max\atop{M}$ follows the power law of H n with n = 0.64 (1), and the relative cooling power depends on H m with m = 1.12 (1) .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Using the maximum entropy distribution to describe electrons in reconnecting current sheets

Particle distributions in weakly collisional environments such as the magnetosphere have been observed to show deviations from the Maxwellian distribution. These can often be reproduced in kinetic simulations, but fluid models, which are used in global simulations of the magnetosphere, do not necessarily capture any of this. We apply the maximum entropy fluid closure of Levermore, which leads to well posed moment equations, to reconstruct particle distributions from a kinetic simulation in a reconnection region. Our results show that without information other than the moments, the model can reproduce the general structure of the distributions but not all of the finer details. In conclusion, the advantages of the closure over the traditional Grad closure are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

SIMPLIFIED PREDICTIVE MODELS FOR CO₂ SEQUESTRATION PERFORMANCE ASSESSMENT RESEARCH TOPICAL REPORT ON TASK #3 STATISTICAL LEARNING BASED MODELS

We compare two approaches for building a statistical proxy model (metamodel) for CO₂ geologic sequestration from the results of full-physics compositional simulations. The first approach involves a classical Box-Behnken or Augmented Pairs experimental design with a quadratic polynomial response surface. The second approach used a space-filling maxmin Latin Hypercube sampling or maximum entropy design with the choice of five different meta-modeling techniques: quadratic polynomial, kriging with constant and quadratic trend terms, multivariate adaptive regression spline (MARS) and additivity and variance stabilization (AVAS). Simulations results for CO₂ injection into a reservoir-caprock system with 9 design variables (and 97 samples) were used to generate the data for developing the proxy models. The fitted models were validated with using an independent data set and a cross-validation approach for three different performance metrics: total storage efficiency, CO₂ plume radius and average reservoir pressure. The Box-Behnken–quadratic polynomial metamodel performed the best, followed closely by the maximin LHS–kriging metamodel.

Mishra, Srikanta↗
DOE OSTI2018

Finite deformation cohesive polygonal finite elements for modeling pervasive fracture

In this work, we introduce a framework for modeling dynamic fracture problems using cohesive polygonal finite elements. Random polygonal meshes provide a robust, efficient method for generating an unbiased network of fracture surfaces. Further, these meshes have more facets per element than standard triangle or quadrilateral meshes, providing more possible facets per element to insert cohesive surfaces. This property of polygonal meshes is advantageous for the modeling of pervasive fracture. We use both Wachspress and maximum entropy shape functions to form a finite element basis over the polygons. Fracture surfaces are captured through dynamically inserted cohesive zone elements at facets between the polygons in the mesh. Contact is enforced through a penalty method that is applied to both closed cohesive surfaces and general interpenetration of two polygonal elements. Finally, several numerical examples are presented that illustrate the capabilities of the method and demonstrate convergence of solutions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Entropy-based closure for probabilistic learning on manifolds

In a recent paper, the authors proposed a general methodology for probabilistic learning on manifolds. The method was used to generate numerical samples that are statistically consistent with an existing dataset construed as a realization from a non-Gaussian random vector. The manifold structure is learned using diffusion manifolds and the statistical sample generation is accomplished using a projected Itˆo stochastic differential equation. This probabilistic learning approach has been extended to polynomial chaos representation of databases on manifolds and to probabilistic nonconvex constrained optimization with a fixed budget of function evaluations. The methodology introduces an isotropic-diffusion kernel with hyperparameter ". Currently, " is more or less arbitrarily chosen. In this paper, we propose a selection criterion for identifying an optimal value of ", based on a maximum entropy argument. The result is a comprehensive, closed, probabilistic model for characterizing data sets with hidden constraints. This entropy argument ensures that out of all possible models, this is the one that is the most uncertain beyond any specified constraints, which is selected. Applications are presented for several databases.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Critical behavior and magnetocaloric effect in Mn 3 Si 2 Te 6

Here, the critical properties and magnetocaloric effect of semiconducting ferrimagnet Mn 3 Si 2 Te 6 single crystals have been investigated by bulk magnetization and heat capacity around T c . Critical exponents β = 0.41 ± 0.01 with a critical temperature T c = 74.18 ± 0.08 K and γ = 1.21 ± 0.02 with T c = 74.35 ± 0.05 K are deduced by the Kouvel-Fisher plot, whereas δ = 4.29 ± 0.05 (3.40 ± 0.02) is obtained by a critical isotherm analysis at T = 74(75)K. The magnetic exchange distance is found to decay as J (r) ≈ r -4.79 , which lies between the mean-field and 3D Heisenberg models. Moreover, the magnetic entropy change -ΔS M features a maximum at T c , i.e., -ΔS$max\atop{M}$ ~ 2.53 (1.67) J kg -1 K -1 with in-plane (out-of-plane) field change of 5 T, confirming large magnetic anisotropy. The heat capacity measurement further gives -ΔS$max\atop{M}$ ~ 2.94 J kg -1 K -1 and the corresponding adiabatic temperature change ΔT ad ~ 1.14 K with out-of-plane field change of 9 T.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Magnon heat transport in a two-dimensional Mott insulator

Whether or not anomalies in the thermal conductivity in insulating cuprates can be attributed to antiferromagnetic order and magnons in a 2D Mott insulator remains an intriguing open question. To shed light on this issue, we investigate the thermal conductivity $\kappa$ and its relationship with the specific heat $c_v$ in the half-filled 2D single-band Hubbard model, using the numerically exact determinant quantum Monte Carlo algorithm and maximum entropy analytic continuation. At low temperatures where the charge degrees of freedom are gapped-out and $c_v$ exhibits a clear magnon peak, we observe that thermal conductivity $\kappa$ also tends to form a peak at similar temperatures. Reducing temperature further produces a sharp upturn in $\kappa$, associated with an increasing mean-free path. Here we identify this as the high-temperature side of the anomalous peak in insulating cuprates, where the mean-free path eventually is cut-off by other scattering effects, including phonons, disorder, and physical size. Different scattering effects in our model are identified and analyzed in the thermal diffusivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Deviations from maximal entanglement for eigenstates of the Sachdev-Ye-Kitaev model

We consider mid-spectrum eigenstates of the Sachdev-Ye-Kiteav (SYK) model. We prove that for subsystems whose size is a constant fraction of the system size, the entanglement entropy deviates from the maximum entropy by at least a positive constant. This result highlights the difference between the entanglement entropy of mid-spectrum eigenstates of the SYK model and that of random states.

Disordered Systems and Neural Networks (cond-mat.d↗
DOE OSTI2021

Resolving Dynamics in the Ensemble: Finding Paths through Intermediate States and Disordered Protein Structures

Proteins have been found to inhabit a diverse set of three-dimensional structures. The dynamics that govern protein interconversion between structures happen over a wide range of time scales-picoseconds to seconds. Our understanding of protein functions and dynamics is largely reliant upon our ability to elucidate physically populated structures. From an experimental structural characterization perspective, we are often limited to measuring the ensemble-averaged structure both in the steady-state and time-resolved regimes. Generating kinetic models and understanding protein structure–function relationships require atomistic knowledge of the populated states in the ensemble. Here, we present ensemble refinement methodologies that integrate time-resolved experimental signals with molecular dynamics models. We first discuss integration of experimental structural restraints to molecular models in disordered protein systems that adhere to the principle of maximum entropy for creating a complete set of ensemble structures. We then propose strategies to find kinetic pathways between the refined structures, using time-resolved inputs to guide molecular dynamics trajectories and the use of inference to generate tailored stimuli to prepare a desired ensemble of protein states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Precipitate Characterization in Model Al-Zn-Mg-(Cu) Alloys Using Small-Angle X-ray Scattering

Model 7000 series alloys with and without copper were fabricated into sheets to study precipitation hardening behavior under isothermal aging conditions. Samples of each alloy were subjected to 3 h annealing treatments at various temperatures to produce a range of precipitate size distributions. Hardness, electrical conductivity, and small-angle X-ray scattering (SAXS) were used to characterize the aging behavior of the two alloys. Precipitate size distributions were modeled from the scattering curves for each annealing condition using a maximum entropy method (MEM) and compared to select transmission electron microscopy (TEM) results. The measured average precipitate diameters from TEM were in good agreement with the average precipitate diameters determined from the scattering curves.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Thermodynamics of photon-enhanced thermionic emission solar cells

Photon-enhanced thermionic emission (PETE) cells in which direct photon energy as well as thermal energy can be harvested have recently been suggested as a new candidate for high efficiency solar cells. Here, we present an analytic thermodynamical model for evaluation of the efficiency of PETE solar cells including an analysis of the entropy production due to thermionic emission of general validity. The model is applied to find the maximum efficiency of a PETE cell for given cathode and anode work functions and temperatures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Augmented Adam-Gibbs model for glass melt viscosity and configuration entropy as functions of temperature and composition

As the temperature of glass melt increases, its structure approaches the state of a simple liquid while the configuration entropy approaches a maximum value. We describe this gradual change using a power law function of inverse temperature. The Adam-Gibbs model for glass viscosity as a function of temperature and glass composition augmented in this way is greatly simplified when applied to common glass families occupying moderate composition regions, such as float glass or nuclear waste glasses, on which properties can be approximated as linear functions of composition. The parsimonious model thus obtained is preferable for use in optimizing glass formulation and mathematical modeling of glass melting and forming. For multicomponent glasses with N viscosity-affecting components, the augmented Adam-Gibbs model requires 2N + 3 adjustable parameters. The model efficacy is demonstrated by fitting the model to a viscosity-temperature-composition dataset for low-activity nuclear waste glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Animal movement estimation and network-based epidemic modeling: Illustration for the swine industry in Iowa (US)

Animal movement plays a critical role in disease transmission between farms. However, in the United States, the lack of available animal shipment data, sometimes coupled with a lack of detailed information about farm demographics and characteristics, presents great challenges for epidemic modeling and prediction. In this study, we proposed a new method based on the maximum entropy to generate “synthetic” animal movement networks, considering available statistics about the premises operation type, operation size, and the distance between premises. We illustrated our method for the swine movement networks in Iowa and performed network analyses to gain insights into the swine industry. We then applied the generated networks to a network-based epidemic model to identify potential system vulnerabilities in terms of disease transmission. The model was parameterized for African Swine Fever (ASF) as the US swine industry is quite concerned about this disease. Results show that premises with a central role in the network are more vulnerable to disease outbreaks and play an important role in disease spread. Simulations with outbreaks starting from random farms reveal no significant large outbreaks, indicating the system’s relative robustness against arbitrary disease introductions. However, outbreaks originating from high out-degree farms can lead to large epidemic sizes. This underscores the importance for stakeholders and policymakers to continue improving animal movement records and traceability programs in the US and the value of making that data available to epidemiologists and modelers to better understand risk and inform strategies aimed to cost-effectively prevent and control disease transmission. Our approach could be easily adapted to estimate movement networks in other animal production systems and to inform disease spread models for various infectious diseases.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Magnetocaloric Effect in La{sub 1−x}Li{sub x}MnO{sub 3}

In this work, we investigate the effect of Li concentration on magnetocaloric effect (MCE) in La{sub 1−x}Li{sub x}MnO{sub 3} (LLMO) using a phenomenological model (PM). The results show that the maximum value of change of magnetic entropy decreases slightly with low Li concentration and does not change with high Li concentration. However, the full width at half maximum and maximum value of change of specific heat increase slightly with low-Li concentration and decrease at high-Li concentration samples. In addition, the relative cooling power does not change monotonously with Li concentration. The results recommend that LLMO samples have potential application for magnetic refrigeration (MR) in an extended temperature range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Hydrogen Plus Other Alternative Fuels Risk Assessment Models (HyRAM+) Version 4.1 Technical Reference Manual

The HyRAM+ software toolkit provides a basis for conducting quantitative risk assessment and consequence modeling for hydrogen, methane, and propane systems. HyRAM+ is designed to facilitate the use of state-of-the-art models to conduct robust, repeatable assessments of safety, hazards, and risk. HyRAM+ integrates deterministic and probabilistic models for quantifying accident scenarios, predicting physical effects, characterizing hazards (thermal effects from jet fires, overpressure effects from delayed ignition), and assessing impacts on people. HyRAM+ is developed at Sandia National Laboratories to support the development and revision of national and international codes and standards, and to provide developed models in a publicly-accessible toolkit usable by all stakeholders. This document provides a description of the methodology and models contained in HyRAM+ version 4.1. The two most significant changes for HyRAM+ version 4.1 from HyRAM+ version 4.0 are direct incorporation of unconfined overpressure into the QRA calculations and modification of the models for cryogenic liquid flow through an orifice. In QRA mode, the user no longer needs to input peak overpressure and impulse values that were calculated separately; rather, the unconfined overpressure is estimated for the given system inputs, leak size, and occupant location. The orifice flow model now solves for the maximum mass flux through the orifice at constant entropy while conserving energy, which does not require a direct speed of sound calculation. This does not affect the mass flow for all-gaseous releases; the method results in the same speed of sound for choked flow. However, this method does result in a higher (and more realistic) mass flow rate for a given leak size for liquid releases than was previously calculated.

08 HYDROGEN↗