SEARCH · Search NASA

Results for “Measurement Campaign”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Limited Role of Absolute Humidity in Intraurban Heat Variability

Abstract Monitoring and understanding the variability of heat within cities is important for urban planning and public health, and the number of studies measuring intraurban temperature variability is growing. Recognizing that the physiological effects of heat depend on humidity as well as temperature, measurement campaigns have included measurements of relative humidity alongside temperature. However, the role the spatial structure in humidity, independent from temperature, plays in intraurban heat variability is unknown. Here we use summer temperature and humidity from networks of stationary sensors in multiple cities in the United States to show spatial variations in the absolute humidity within these cities are weak. This variability in absolute humidity plays an insignificant role in the spatial variability of the heat index and humidity index (humidex), and the spatial variability of the heat metrics is dominated by temperature variability. Thus, results from previous studies that considered only intraurban variability in temperature will carry over to intraurban heat variability. Also, this suggests increases in humidity from green infrastructure interventions designed to reduce temperature will be minimal. In addition, a network of sensors that only measures temperature is sufficient to quantify the spatial variability of heat across these cities when combined with humidity measured at a single location, allowing for lower-cost heat monitoring networks. Significance Statement Monitoring the variability of heat within cities is important for urban planning and public health. While the physiological effects of heat depend on temperature and humidity, it is shown that there are only weak spatial variations in the absolute humidity within nine U.S. cities, and the spatial variability of heat metrics is dominated by temperature variability. This suggests increases in humidity will be minimal resulting from green infrastructure interventions designed to reduce temperature. It also means a network of sensors that only measure temperature is sufficient to quantify the spatial variability of heat across these cities when combined with humidity measured at a single location.

Meteorology & Atmospheric Sciences↗

NASA NTRS1998

The Ny-Alesund aerosol and ozone measurements intercomparison campaign 1997/1998 (NAOMI-1998)

An intercomparison campaign for Lidar measurements of stratospheric ozone and aerosol has been conducted at the Primary Station of the Network for the Detection of Stratospheric Change (NDSC) in Ny-Alesund/Spitsbergen during January-February 1998. In addition to local instrumentation, the NDSC mobile ozone lidar from NASA/GSFC and the mobile aerosol lidar from Alfred Wegener Institute (AWI) participated. The aim is the validation of stratospheric ozone and aerosol profile measurements according to NDSC guidelines. This paper briefly presents the employed instruments and outlines the campaign. Results of the blind intercomparison of ozone profiles are given in a companion paper and temperature measurements are described in this issue.

Neuber, R.↗

NASA NTRS2007

The Role of Convection in Redistributing Formaldehyde to the Upper Troposphere Over North America and the North Atlantic during the Summer 2004 INTEX Campaign

Measurements of CH2O from a tunable diode laser absorption spectrometer (TDLAS) were acquired onboard the NASA DC-8 during the summer 2004 INTEX-NA (Intercontinental Chemical Transport Experiment - North America) campaign to test our understanding of convection and production mechanisms in the upper troposphere (UT, 6-12-km) over continental North America and the North Atlantic Ocean. Point-by-point comparisons with box model calculations, when MHP (CH3OOH) measurements were available for model constraint, resulted in a median CH2O measurement/model ratio of 0.91 in the UT. Multiple tracers were used to arrive at a set of UT CH2O background and perturbed air mass periods, and 46% of the TDLAS measurements fell within the latter category. At least 66% to 73% of these elevated UT observations were caused by enhanced production from CH2O precursors rather than direct transport of CH2O from the boundary layer. This distinction is important, since the effects from the former can last for over a week or more compared to one day or less in the case of convective transport of CH2O itself. In general, production of CH2O from CH4 was found to be the dominant source term, even in perturbed air masses. This was followed by production from MHP, methanol, PAN type compounds, and ketones, in descending order of their contribution. In the presence of elevated NO from lightning and potentially from the stratosphere, there was a definite trend in the CH2O discrepancy, which for the highest NO mixing ratios produced a median CH2O measurement/model ratio of 3.9 in the 10-12-km range. Discrepancies in CH2O and HO2 in the UT with NO were highly correlated and this provided further information as to the possible mechanism(s) responsible. These discrepancies with NO are consistent with additional production sources of both gases involving CH3O2 + NO reactions, most likely caused by unmeasured hydrocarbons.

Fried, Alan↗

NASA NTRS2000

Hydrometeor Profiles Derived from Airborne Radar and Wideband Radiometer Observations

A rich dataset was obtained with observations from the MIR (Millimeter-wave Imaging Radiometer, 89, 150, 183.3$\pm$1, 183.3$\pm$3,183.3$\pm$7, and 220 apprx.GHz), the AMPR (Advanced Microwave Precipitation Radiometer, 10.7, 19.35, 37, and 85 approx. GHz), and the EDOP (ER-2 Doppler Radar, 9.6 approx. GHz) on board the ER-2 aircraft during the CAMEX-3/TEFLUN-B (Convection and Moisture Experiment/Texas and Florida Underflights) TRMM (Tropical Rainfall Measuring Mission) field campaign. Measurements over the ocean from these three instruments on 26 August 1998 were used in our iterative retrieval algorithm to estimate hydrometeor drop size profiles, The algorithm attempts to minimize the difference between the observations and forward radiometer and radar calculations based on the estimated profile. The high frequency MIR observations provide detailed information about the high altitude ice microphysics, while the AMPR is mostly used to define liquid hydrometeor characteristics. The EDOP provides an initial estimate of the profile and as a consistency check throughout the iterative cycle. The retrieval algorithm, specific results for convective and anvil cases, and general implications of this work will be presented.

Skofronick-Jackson, G. M.↗

DOE OSTI2023

Analysis of the MUSIC 3 He Multiplicity Data

A measurement campaign called the Measurement of Uranium Subcritical and Critical (MUSiC) was performed on a range of configurations of highly-enriched uranium (HEU) from December 2020 through April of 2021. While part of the focus was to measure reactor kinetics parameters on delayed supercritical systems, an additional focus was performing neutron noise measurements on subcritical configurations from deeply subcritical to nearly delayed critical. Multiple detector systems were used to perform these measurements, such as a 3 He multiplicity detector called the Neutron Multiplicity Array Detector (NoMAD) and a liquid scintillator system called the Rossi-α Measurement Rapid Organic Discriminating Detector (RAM-RODD). Also included were a scintillator system from the University of Michigan and a set of small 3He tubes that have previously been used to measure Rossi-α values on near-critical systems. The focus of this paper will be a comparison of prospective analysis methods for the NoMAD measurements. Previous subcritical measurements at the National Criticality Experiments Research Center (NCERC) submitted to the International Criticality Safety Benchmark Evaluation Project (ICSBEP) used the Hage-Cifarelli formalism of the Feynman Variance-to-Mean method. This relies on the time correlations of neutron detections to infer the spontaneous fission rate and neutron multiplication of a system through binning the time tagged detections and analyzing resulting histograms of the numbers of counts. However, there are other neutron noise methods that rely on similar processes, such as the Hansen-Dowdy formalism which uses a slightly different methodology to extract multiplication from the neutron multiplicity counting moments. Comparisons can be made between these experimental results and those obtained through simulations to validate or identify deficiencies in analysis, detection methods, or the underlying nuclear data. Different time gating strategies and their effects on count rate uncertainties are also investigated.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Wind Loading on Parabolic Trough Collectors: Wind and Structural Loads Measurements at an Operational Powerplant

Concentrated Solar Power (CSP) is a promising method for using solar power for electricity generation with thermal energy storage for industrial applications. Solar collectors constitute almost 1/3 of the total cost of the power plant. One of the primary drivers of unrealiability of these collectors is wind-driven loading of mirrors, support structures, and drives. To date, the design of the solar collector structures has relied on data from wind tunnels that do not adequately capture the dynamic effects observed at scale. NREL initiated a field measurement campaign at the operational Nevada Solar One (NSO) parabolic trough powerplant. At this plant, parabolic trough solar collectors track the sun from east to west in the course of a day and face varying wind loads depending on the wind properties and the angle of the troughs. The aim of the project is a detailed characterization of prevailing wind and turbulence conditions and resulting operational loads on parabolic troughs, providing insights into structural dynamic response, and generating a comprehensive wind-loading dataset for validating simulations of wind loading on collector structures. The measurements at NSO consist of sonic anemometers on masts at different heights to characterize the incoming flow and conditions at four trough rows at the edge of the trough field. In addition, a Doppler Lidar scans the horizontal plane above the troughs. The wind measurements at NSO have been continuously collecting data since October 2021 and are combined with structural load measurements that started in November 2022. The load measurements were installed on the same four outermost trough rows and include support structure bending moments, drive torque moments, dynamic accelerations of the spaceframe, mirror displacement, and tilt angles. Measurements are planned to continue until May 2023, providing a first-of-a-kind, high-resolution multi-month dataset of combined wind and load measurements. In this presentation, we show first results of the measurement campaign. Based on the measurements, we identified three main factors altering the flow over the parabolic troughs: Wind speed, wind direction, and the angle of the parabolic troughs. Most interactions between incoming wind and the trough field are observed when the wind blows perpendicular to the trough rows. In this case, the first rows experience the highest wind speed and block the downwind rows, creating conditions with decreased wind speed and enhanced turbulence within the trough field. Also, turbulent length scales are smaller after the first row. This leads to the highest static loads (bending and torque moments) at the first row but potentially increased dynamic loads within the field. We illustrate our findings with case studies focused on different wind conditions and will present fatigue analysis to highlight the impact of wind-driven loads on collector structures.

CSP collectors↗

DOE OSTI2023

Methane Emissions Produced by Pneumatic Devices and Produced Water Tanks on Natural Gas Wellsites

In recent years, more scrutiny has been placed on the release of greenhouse gasses (GHGs) by the oil and gas industry in North America as climate concerns increase. In the coming years, stricter regulations proposed by the Environmental Protection Agency (EPA) concerning the release of GHGs will further direct attention to GHG emissions quantification, modeling, and overall reduction. Active natural gas wellsites employ production equipment that routinely emits methane during normal operation. Production equipment often includes, but is not limited to, gas production units (GPUs), pneumatic controllers (PCs) and actuators powered by produced natural gas, and produced water storage tanks. This work details direct methane emission measurements taken at active natural gas wellsites originating from intermittent pneumatic controllers and produced water storage tanks. Efforts to model methane flows originating from these sources are also detailed, and those results are compared to direct measurement. The direct methane emissions measurement campaign collected flow data from two active dry wellsites in the Marcellus shale region. These measurement campaigns captured, in total, several weeks of continuous data from these sites. Data included multiple pneumatic device vent flowrate channels, a single channel monitoring total emissions vented from the produced water storage tanks, and corresponding site weather data. Periodic composition measurements were taken from flows vented from produced water tanks. Computational modeling efforts attempted to mimic a given site’s methane emissions behavior given limited input parameters. Direct measurement data and simulation data yielded, through reduction and analysis, apparent methane emissions factors, statistics on pneumatic device actuation events, important relationships between GPU parameters and pneumatic device actuation events, produced water storage tank vent flows and flow compositions, and parameters most contributing to the magnitude and frequency of these fugitive methane emissions. Measurements, considering data from a 72hr period, produced PC emissions factors from 0.008 to 0.03 SCFH per device with an average device emitting 0.026 SCFH at the first site. The second site produced PC emissions factors spanning from 0.05 to 25.47 SCFH with an average device emitting 1.93 SCFH not including the 25.47 SCFH device, which was assumed to be malfunctioning. Two unique water tank emission measurements were made, 618 g CH4 per hour and 32.6 g CH4 per hour. On a water basis, the water tank emissions factors were 0.66 and 0.042 kg CH4 per bbl of water, respectively.

03 NATURAL GAS↗

NASA NTRS2018

NASA's SnowEx Campaign and Measuring Global Snow from Space

Snow blankets 30% of Earth's land surface (60% of northern hemisphere land) in midwinter, dramatically changing our planet's land surface and affecting our weather for months. Seasonal snow is critically important to society for the management of water resources, natural hazards, water security, and in many economic sectors. The only practical way to estimate the quantity of snow on a global scale is through satellites. Despite 4 decades of satellite observations, the highly variable nature of snow still presents significant challenges toward achieving this goal. For example, current space-based techniques underestimate snow water equivalent (SWE) by as much as 50%, and model-based estimates can differ greatly versus estimates based on remotely-sensed observations. Snow community consensus is that a multi-sensor approach is needed to adequately address global snow, combined with modeling and data assimilation to fill the gaps in space and time. What remains, then, is how best to combine and use the various sensors under different types of snow conditions and confounding factors. NASA's multi-year SnowEx airborne campaign is designed to collect measurements needed to enable algorithm development and to guide those mission trade studies. Year 1 (2017) focused on the distribution of snow-water equivalent (SWE) and the snow energy balance in a forested environment. This paper will discuss the various remote sensing options for snow, the challenging factors, and describe the recently-completed first year of SnowEx in Colorado, USA. Ground-based remote sensing and in situ data collection involved nearly 100 participants over three weeks. The airborne campaign included nine sensors on five aircraft. We will conclude by discussing options for a future snow satellite mission.

campaign↗

NASA NTRSDate not supplied

Applications of PLIF within Supersonic/Hypersonic Flows relevant to Space Technology and Exploration

We summarize two recent applications of planar laser-induced fluorescence using seeded nitric oxide (NO-PLIF) within two different large-scale facilities for space technology and exploration. The first measurement campaign described is the NO-PLIF measurements performed within the 31-in Mach 10 air tunnel at NASA Langley Research Center for flow visualization, velocity, and temperature measurements of the wake produced by a hypersonic blunt-body. PLIF within this wake-flow was performed to support the developments of HIAD (hypersonic inflatable aerodynamic decelerator) technology, including the recent LOFTID flight mission. The second campaign is the NO-PLIF measurements performed within a 20-ft vacuum chamber at the NASA Marshall Space Flight Center for flow visualization of a Mach 5 plume impinging on a flat plate under rarefied and continuum conditions. PLIF within this supersonic flow was performed to support future lunar and Martian lander missions by investigating the plume impingement behavior. While both of these measurement campaigns were performed using 10 Hz PLIF laser systems, current efforts include utilization of tunable high-repetition-rate lasers for NO-PLIF measurements up to kHz-MHz rates.

Planar laser-induced fluorescence↗

NASA NTRS2018

Narrowband Propagation Statistics of Aeronautical Mobile-Ground Links in the L- and C-Bands

To provide for the safe integration of unmanned aircraft systems (UAS) into the National Airspace System (NAS), command and control (C2) links must be highly reliable. Hence, protected aviation spectrum is required to support such links for UAS that are integrated into controlled non-segregated airspace. For air-ground (i.e., non-satellite) links, protected aviation spectrum to support C2 links is available in the 960-1164 MHz (L) and 5030-5091 MHz (C) bands. The performance of any C2 system is critically dependent upon the characteristics of the air-ground (AG) channel. Therefore, as part of its UAS Integration in the NAS (UAS in the NAS) project, the U.S. National Aeronautics and Space Administration (NASA) performed a series of air-ground propagation flight tests to collect AG channel data for model development and analysis of potential C2 communications links capable of providing the required reliability. NASA's Glenn Research Center (GRC) conducted an extensive air-ground channel propagation measurement campaign (at altitude) for frequencies in the 960-977 MHz and 5030-5091 MHz ranges, for seven different terrain environments. The measurements were conducted in 2013, and produced the largest set of AG channel data ever gathered to date. This data was subsequently processed to develop models for the AG channel. The statistics collected enabled the derivation of channel model parameters for both narrowband and wideband channels. In order to make the propagation data widely available, the resulting narrowband statistics were processed and submitted to the International Telecommunications Union - Radiocommunication Sector (ITU-R) Study Group 3 Data Banks. Formats for data tables were developed, and tables of the aggregate narrowband propagation statistics for the seven ground site terrain environments were prepared, submitted to, and approved by, the ITU-R Study Group 3. This paper provides brief background on the measurement campaign, collection and processing of data, and development of the narrowband data tables. It further provides examples of the data and its use.

radiofrequency spectrum↗

NASA NTRS2018

Narrowband Propagation Statistics of Aeronautical Mobile-Ground Links in the L- and C-Bands

To provide for the safe integration of unmanned aircraft systems (UAS) into the National Airspace System (NAS), command and control (C2) links must be highly reliable. Hence, protected aviation spectrum is required to support such links for UAS that are integrated into controlled non-segregated airspace. For air-ground (i.e., non-satellite) links, protected aviation spectrum to support C2 links is available in the 960-1164 MHz (L) and 5030-5091 MHz (C) bands. The performance of any C2 system is critically dependent upon the characteristics of the air-ground (AG) channel. Therefore, as part of its UAS Integration in the NAS (UAS in the NAS) project, the U.S. National Aeronautics and Space Administration (NASA) performed a series of air-ground propagation flight tests to collect AG channel data for model development and analysis of potential C2 communications links capable of providing the required reliability. NASA's Glenn Research Center (GRC) conducted an extensive air-ground channel propagation measurement campaign (at altitude) for frequencies in the 960-977 MHz and 5030-5091 MHz ranges, for seven different terrain environments. The measurements were conducted in 2013, and produced the largest set of AG channel data ever gathered to date. This data was subsequently processed to develop models for the AG channel. The statistics collected enabled the derivation of channel model parameters for both narrowband and wideband channels. In order to make the propagation data widely available, the resulting narrowband statistics were processed and submitted to the International Telecommunications Union Radiocommunication Sector (ITU-R) Study Group 3 Data Banks. Formats for data tables were developed, and tables of the aggregate narrowband propagation statistics for the seven ground site terrain environments were prepared, submitted to, and approved by, the ITU-R Study Group 3. This paper provides brief background on the measurement campaign, collection and processing of data, and development of the narrowband data tables. It further provides examples of the data and its use.

aircraft communications↗

DOE OSTI2023

NCERC Provides Unique Opportunities for University Student Researchers

Five students and one faculty member - sponsored by the Defense Nuclear Nonproliferation (DNN, NA 22) university consortia - visited the National Criticality Experiments Research Center (NCERC) in July of 2023 to measure radiation signatures from Category I Special Nuclear Material (SNM) in a week-long measurement campaign organized by staff at Los Alamos National Laboratory. Participants included University of Florida, University of Michigan, and University of Illinois-Champaign Urbana. The measurement campaign was organized on behalf of the Consortium for Monitoring, Testing, and Verification (MTV), the Nuclear Science and Security Consortium (NSSC), and the Consortium for Enabling Technologies and Innovation (ETI).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

An Experimental Setup for Mechanical Vibration Analysis Using VLC

This study explores the potential applications across various domains, including earthquake detection and warning systems, where the system’s sensitivity to ground vibrations can contribute to early seismic event detection. Additionally, the study paves the way of developing applications of VLC/T in mechanical vibration and stability analysis of engines and platforms, offering insights into structural integrity and performance optimization. These multifaceted applications underscore the adaptability and potential of VLC/T systems in diverse fields, heralding advancements in sensing, communication, and security technologies. To achieve this, in this study, Peak to Average Power Ratio (PAPR) is proposed to represent the impact of mechanical shocks and vibrations generated by several weights dropped onto the platform with which the receiver is fixed. Even though non-contact measurement methodology is preferred for various reasons, the proposed measurement campaign obtains the data in contact form; however, the system and signal model proposed in this study could easily be extended into non-contact form. Considering the fact that the proposed measurement campaign employs off-the-shelf products, it is cost-effective and very scalable.

Yilmaz, Ahmet Mucahit↗

NASA NTRS1987

Equatorial ozone profiles from the ground to 52 km during the Southern Hemisphere autumn

The results of an ozone measurement campaign conducted at Natal, Brazil from March 25 to April 15, 1985 are reported. Complete profiles of ozone, pressure, and temperature were obtained from the ground to 52 km, and all of the profiles correspond with site overpasses by ozone instruments on NASA and NOAA satellites. The profiles from this measurement series show reasonable agreement with established satellite climatologies. Stratospheric ozone variability was 2 percent or less during the 3 weeks of the measurement campaign, with stratospheric temperature and pressure variabilities half that amount. Low variability at a single location for this period implies comparable uniformity for ozone profiles over a large area around the measurement site. The auxiliary pressure and temperature profiles presented here allow the use of this data set as a transfer standard between satellite instruments with different fundamental ozone measurements. Finally, the low ozone variability in the stratosphere at Natal during this measurement series should provide an opportunity for high-quality intercomparisons of measured and modeled ozone concentrations in the equatorial stratosphere and lower mesosphere as well as a consistency check among satellite ozone measurements.

Barnes, Robert A.↗

NASA NTRS2016

Results of a Longer Term NDACC Measurements Comparison Campaign at Mauna Loa Observatory

Between November, 2015 and January, 2015, the Goddard Space Flight Center (GSFC) operated a pair of lidar instruments at the NOAA (National Oceanic and Atmospheric Administration) facility at Mauna Loa on the Big Island of Hawaii (Latitude 19.5 degrees North, Longitude 155.5 degrees West, altitude 3.397 kilometers). Measurements were made during six different four week periods during this time period by both the NASA GSFC Stratospheric Ozone Lidar (STROZ) and the Aerosol and Temperature (ATL) lidar. Also making measurements were the JPL Stratospheric Ozone Lidar and the NOAA Aerosol and Water Vapor Lidar. All instruments participate and archive data with the Network for the Detection of Atmospheric Composition Change (NDACC). Measurement comparisons were made among various instruments in accordance with the standard intercomparison protocols of the NDACC.

McGee, Thomas J.↗

DOE OSTI2021

UNH TDP - Concurrent Measurements of Inflow, Power Performance, and Loads for a Grid-Synchronized Vertical Axis Cross-Flow Turbine Operating in a Tidal Estuary

This data was collected between October 12 and December 15 of 2021 at the University of New Hampshire (UNH) and Atlantic Marine Energy Center (AMEC) turbine deployment platform (TDP). This data set includes over 29 days of grid connected turbine operation during this 65 day time frame. The priority for this measurement campaign was to collect data while the turbine was electrically connected to the grid by means of a rectifier and inverter. The Fall_2021_UNH_Measurement_Timeline.png highlights when each instrument was functioning and the Fall_2021_UNH_Test_Log.jpg indicates the four main regions for analysis available from this measurement campaign. The TDP is a floating structure moored on the Portsmouth facing side of Memorial Bridge pier #2, which spans the Piscataqua River between Portsmouth, NH and Kittery, ME. The Piscataqua River connects the Great Bay Estuary to the Gulf of Maine and the river currents are dominated by tidal forcing with water velocities exceeding 2.5 m/s during spring ebb tides at this site which were previously characterized by Kaelin Chancey (Assessment Of The Localized Flow And Tidal Energy Conversion System At An Estuarine Bridge - UNH MS Thesis 2019). The turbine under test was a modified New Energy Corporation (Calgary, CA) model EVG-025 4-blade H-Darrius type vertical axis cross flow turbine that rotates in the clockwise direction with a rotor diameter of 3.2m and blade length of 1.7m. The hydro-foil profile was a NACA 0021 with a 10 inch chord length and a blade preset pitch angle of +4deg with a positive angle corresponding with the toe in direction. The standard EVG-025 has a rotor diameter of 3.4m and its rated power output is 25kW at 3 m/s. The rotor diameter was reduced to accommodate the size of the existing TDP moon-pool. This project was pursued to quantify device performance for cross flow turbines operating in a marine environment. Accurate physical models, to characterize cross flow turbine performance, require real operational data sets due to the complexity of blade fluid interactions. This data can help support model development which will help predict turbine performance when analyzing perspective project locations in the future. Instrumentation was deployed to measure; water speed/direction, electrical power output, turbine shaft speed, turbine thrust force, and platform motion. Concurrent measurements of these parameters allow for correlations (cause and affect) to be inferred, allowing for characterization of device performance over a range of operating conditions. Water currents were measured using Acoustic Doppler Current Profilers (ADCP's) and Acoustic Doppler Velocimeters (ADV's) directly upstream and downstream of the turbine for inflow, wake and turbulence measurements. Electrical power output was measured using the Voltsys rectifier and the Shark power meter. Shaft speed was calculated based on the Voltsys measurements of the permanent magnet three phase generator AC generation frequency, coupled directly to the cross flow turbine under test (i.e., no gear box). Platform motions were captured using a Yost IMU (inertial measurement unit). Turbine thrust loading was measured using a reaction arm about the turbine deployment platform spanning beam, where two bi-directional load cells were connected to the system via a pinned connection. This submission includes zipped folders for each instrument containing quality controlled (QC'd) data in daily .csv files for the relevant duration specific to each instrument, along with separate .csv file that contains the units for each variable. Some instrument daily files are quite large and can pose a challenge for a visual spreadsheet editor to open. A processing software like MATLAB or Python is recommended. Note the degree of QC varied between each instrument due to time constraints. Particular time and attention was given to perform quality control tests on the acoustic based instruments that are particularly suscep...

16 TIDAL AND WAVE POWER↗

NASA NTRS1995

Narrowband and wideband characterisation of satellite mobile/PCN channel

This paper presents models characterizing satellite mobile channel. Statistical narrowband models based on the CSER high elevation angle channel measurement campaign are reported. Such models are understood to be useful for communication system simulations. It has been shown from the modelling results that for the mobile satellite links at high elevation angles line-of-sight (LOS) signal is available most of the time, even under the heavy shadowing conditions. Wideband measurement campaign which CSER is about to undertake, and subsequently the modelling approach to be adopted is also discussed. It is noted that a wideband channel model is expected to provide a useful tool in investigating CDMA applications.

Butt, G.↗

DOE OSTI2023

In Situ Wind and Turbulence Measurements in a Field of Full-Size Parabolic Trough Solar Collectors

Concentrated Solar Power (CSP) is a promising method for using Solar power for electricity generation with thermal energy storage. One of the primary drivers of structural design costs of CSP collector structures is wind loading. To date, the design of these structures has relied on data from wind tunnels that do not adequately capture the dynamic effects observed at scale. NREL initiated a field measurement campaign at the operational Nevada Solar One (NSO) powerplant that uses parabolic troughs as solar collectors. The aim of the project is a detailed characterization of prevailing wind and turbulence conditions and resulting operational loads on parabolic troughs, providing insights on structural dynamic response, and generating a first-of-a-kind, comprehensive, high-resolution wind-loading dataset available for validating simulations of wind loading on collector structures. The measurements at NSO consist of Sonic anemometers on masts at different heights to characterize the incoming flow and conditions within and above the trough field, in combination with a Doppler Lidar scanning the horizontal plane above the troughs. The wind measurements at NSO have been continuously operating since October 2021 and provide a year-long dataset characterizing wind and turbulence conditions. The structural load measurements start in November 2022 and will complement the wind measurements. In this poster, we present first results of the wind measurement campaign by highlighting days with different atmospheric flow conditions. We identified three main factors altering the flow over the parabolic troughs: Wind speed, wind direction, and the angle of the parabolic troughs. The highest loads are expected when the wind blows perpendicular to the trough rows. In this case, the first rows experience the highest loads and block the subsequent rows, creating conditions with decreased wind speed and enhanced turbulence within the trough field. Also, turbulent length scales change. These affected conditions produce unique load cases on the structures that will be captured by the load measurements. If the wind blows along the trough rows, wind and turbulence conditions are less influenced by the troughs.

atmospheric turbulence↗