Search NASA⌕ Search

SEARCH · Search NASA

Results for “Measurement Optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Optimizing BAO measurements with non-linear transformations of the Lyman-α forest

We explore the effect of applying a non-linear transformation to the Lyman-α forest transmitted flux F=e{sup −τ} and the ability of analytic models to predict the resulting clustering amplitude. Both the large-scale bias of the transformed field (signal) and the amplitude of small scale fluctuations (noise) can be arbitrarily modified, but we were unable to find a transformation that increases significantly the signal-to-noise ratio on large scales using Taylor expansion up to the third order. In particular, however, we achieve a 33% improvement in signal to noise for Gaussianized field in transverse direction. On the other hand, we explore an analytic model for the large-scale biasing of the Lyα forest, and present an extension of this model to describe the biasing of the transformed fields. Using hydrodynamic simulations we show that the model works best to describe the biasing with respect to velocity gradients, but is less successful in predicting the biasing with respect to large-scale density fluctuations, especially for very nonlinear transformations.

79 ASTRONOMY AND ASTROPHYSICS↗

Frhodo: A program for simulating chemical kinetic measurements and optimizing kinetic mechanisms

Chemical kinetic simulations are frequently used to extract kinetic and mechanistic information from experimental data by fitting simulations to the data. For simple systems of consecutive single channel reactions this is a relatively straightforward task. However, as the complexity of the system increases and particularly for systems involving competitive multi-channel reactions manually optimizing a mechanism to obtain the best fits to a range of experimental data quickly becomes a time-intensive and challenging process, especially when rate coefficients have pressure and temperature dependencies. There is considerable potential for exploiting automated optimization methods to rapidly screen reaction mechanisms and optimize the fit by adjusting rate coefficients within well-defined constraints. A new chemical kinetics simulation program, Frhodo, has been developed for this purpose. The program allows either manual simulation of individual experiments or fully automated optimization against a range of experimental data by adjusting user selected reactions within user defined constraints. Frhodo incorporates machine learning-based optimization routines that work by either minimizing standardized residuals or through Bayesian parameter estimation. Frhodo's optimization capabilities are demonstrated by reexamining two previously studied systems of relevance to combustion. Dissociation of diacetyl followed by recombination of methyl radicals is an example of a sequence of single channel, consecutive reactions. Pyrolysis of 2-methyl furan exemplifies multi-channel, unimolecular reactions that are often encountered and have temperature and pressure dependencies in the rate coefficients of the channels and branching ratios between them. For both systems the optimization routines resulted in solutions similar to the original studies. Finally, comments are made on the strengths and limitations of the approach.

0D simulation↗

Baseline Optimization for the Measurement of CP Violation, Mass Hierarchy, and $\theta_{23}$ Octant in a Long-Baseline Neutrino Oscillation Experiment

Next-generation long-baseline electron neutrino appearance experiments will seek to discover C P violation, determine the mass hierarchy and resolve the θ 23 octant. In light of the recent precision measurements of θ 13 , we consider the sensitivity of these measurements in a study to determine the optimal baseline, including practical considerations regarding beam and detector performance. We conclude that a detector at a baseline of at least 1000 km in a wide-band muon neutrino beam is the optimal configuration.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A convergence metric for counting statistics in time-resolved small angle neutron scattering

Here, this work introduces a model-independent, dimensionless metric for predicting optimal measurement duration in time-resolved small-angle neutron scattering using early-time data. Built on a Gaussian process regression framework, the method reconstructs scattering profiles with quantified uncertainty, even from sparse or noisy measurements. Demonstrated on the EQ-SANS instrument at the Spallation Neutron Source, the approach generalizes to general SANS instruments with a two-dimensional detector. A key result is the discovery of a dimensionless convergence metric revealing a universal power-law scaling in profile evolution across soft matter systems. When time is normalized by a system-specific characteristic time t*, the variation in inferred profiles collapses onto a single curve with an exponent between −2 and −1. This trend emerges within the first ten time steps, enabling early prediction of measurement sufficiency. The method supports real-time experimental optimization and is especially valuable for maximizing efficiency in low-flux environments such as compact accelerator-based neutron sources.

Tung, Chi-Huan [Oak Ridge National Laboratory (ORN↗

Measurement Protocols for Optimized Fuel Assembly Tags

This report describes the measurement protocols for optimized tags that can be applied to standard fuel assemblies used in light water reactors. This report describes work performed by the authors at Pacific Northwest National Laboratory for NA-22 as part of research to identify specific signatures that can be developed to support counter-proliferation technologies.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Reconstruction of simulated electrostatic potentials by automatic differentiation-based phase retrieval in electron microscopy imaging

Measuring interfacial electrostatic potentials is vital to understanding many fundamental materials properties. A variety of TEM methods exist for measuring electric potentials from the phase shift produced on an electron wave as it passes through a sample. However, most are either experimentally challenging or poorly suited to resolving nanoscale features. Here, we demonstrate the viability of a simple, automatic differentiation-based exit wave reconstruction from a focal series of images to accurately measure nanoscale electric potentials. Here, the analysis suggests that under optimal measurement conditions, electric potentials can be resolved to less than 0.06 V in magnitude and less than 1 nm in spatial extent.

36 MATERIALS SCIENCE↗

OECD MCCI Project Small-Scale Water Ingression and Crust Strength Tests (SSWICS) SSWICS-10 Test Data Report (Thermal Hydraulic Results)

The Melt Attack and Coolability Experiments (MACE) program at Argonne National Laboratory addressed the issue of the ability of water to cool and thermally stabilize a molten core/concrete interaction (MCCI) when the reactants are flooded from above. These experiments provided unique, and for the most part repeatable, indications of heat transfer mechanisms that could provide long term debris cooling. However, the results did not demonstrate definitively that a melt would always be completely quenched. This was due at least partially to the fact that the crust anchored to the test section sidewalls in every test, which led to melt/crust separation, even at the largest test section lateral span of 1.2 m. This decoupling is not expected for a typical reactor cavity where the lateral span is much larger, ~5-6 m. Instead, the crust is expected to fracture under the weight of the coolant and the crust itself so that coolant contact with the melt is maintained. However, because of a lack of knowledge of the strength of the crust, one cannot be certain that it would actually fracture under such circumstances. As part of the MCCI-1 and MCCI-2 programs, a series of separate-effects experiments has been conducted to measure corium quench rates and crust strength to investigate the various debris cooling mechanisms identified in the MACE program. Each quench test involved cooling a molten mass of UO 2 , ZrO 2 , and concrete constituents, which produced a corium ingot that was later load tested to determine its mechanical strength. The quench tests were designed to optimize measurements of heat flux from the corium surface and consequently the ingots that were formed were not of optimal thickness for the strength measurements. For the quench tests, a minimum corium depth of 150 mm was deemed necessary to obtain a satisfactory heat flux measurement. However, 150 mm is too much for optimal load testing and so the ingots were sectioned (cut in the radial direction) to increase their aspect ratio (diameter/thickness) to make them more suitable for load testing. Unfortunately, the cutting process is laborious and involves much handling of the ingot and therefore decreases the certainty that the mechanical strength of the sections is close to that of the original ingot. This uncertainty would be eliminated if the ingots produced by the quench tests could be tested without having to cut them. SSWICS-9 & 10, in contrast to previous tests, are designed to optimize the ingot for load testing. A reduced amount of corium will be used in the quench test to produce a thinner ingot. The ingot will then be load tested without sectioning. This report details the results of the SSWICS-10 quench test.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

OECD MCCI Project: Small-Scale Water Ingression and Crust Strength Tests (SSWICS), SSWICS-9 Test Data Report (Thermal Hydraulic Results)

The Melt Attack and Coolability Experiments (MACE) program at Argonne National Laboratory addressed the issue of the ability of water to cool and thermally stabilize a molten core/concrete interaction (MCCI) when the reactants are flooded from above. These experiments provided unique, and for the most part repeatable, indications of heat transfer mechanisms that could provide long term debris cooling. However, the results did not demonstrate definitively that a melt would always be completely quenched. This was due at least partially to the fact that the crust anchored to the test section sidewalls in every test, which led to melt/crust separation, even at the largest test section lateral span of 1.2 m. This decoupling is not expected for a typical reactor cavity where the lateral span is much larger, ~5-6 m. Instead, the crust is expected to fracture under the weight of the coolant and the crust itself so that coolant contact with the melt is maintained. However, because of a lack of knowledge of the strength of the crust, one cannot be certain that it would actually fracture under such circumstances. As part of the MCCI-1 and MCCI-2 programs, a series of separate-effects experiments has been conducted to measure corium quench rates and crust strength to investigate the various debris cooling mechanisms identified in the MACE program. Each quench test involved cooling a molten mass of UO 2 , ZrO 2 , and concrete constituents, which produced a corium ingot that was later load tested to determine its mechanical strength. The quench tests were designed to optimize measurements of heat flux from the corium surface and consequently the ingots that were formed were not of optimal thickness for the strength measurements. For the quench tests, a minimum corium depth of 150 mm was deemed necessary to obtain a satisfactory heat flux measurement. However, 150 mm is too much for optimal load testing and so the ingots were sectioned (cut in the radial direction) to increase their aspect ratio (diameter/thickness) to make them more suitable for load testing. Unfortunately, the cutting process is laborious and involves much handling of the ingot and therefore decreases the certainty that the mechanical strength of the sections is close to that of the original ingot. This uncertainty would be eliminated if the ingots produced by the quench tests could be tested without having to cut them. SSWICS-9 & 10, in contrast to previous tests, are designed to optimize the ingot for load testing. A reduced amount of corium will be used in the quench test to produce a thinner ingot. The ingot will then be load tested without sectioning. This report details the results of the SSWICS-9 quench test.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Calculational Model of the Radiation Calibration Lab (RCL) and the Neutron Measurements performed at the Facility, with a 252 Cf Source

Calibration of detectors measuring gamma, neutron, alpha and beta radiation, and of personal dosimeters used at Lawrence Livermore National Laboratory (LLNL), is performed at the Radiation Calibration Lab (RCL). The calibrations done with a standard calibrated 252 Cf source are a function of the energy spectra, fluence and dose of the source. A detailed calculational model of the RCL has been carried out with the MCNP6 code. The calculations have also reproduced quite well the measurements of the fluence and dose rates for the bare and moderated 252 Cf source carried out by R. Radev using the Rospec Spectrometer and by Clark and Wilson using a Passive Neutron Spectrometer. The importance of having the calculational model of the RCL facility is to calculate the dose rates expected for a given planned measurement, optimizing the choice of detectors, design and shielding materials before the actual measurement are carried out, resulting in a more efficient and time saving measurement. Furthermore, an accurate model of the facility allows to detect possible problems with the measurement.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Gaming the beamlines—employing reinforcement learning to maximize scientific outcomes at large-scale user facilities

Abstract Beamline experiments at central facilities are increasingly demanding of remote, high-throughput, and adaptive operation conditions. To accommodate such needs, new approaches must be developed that enable on-the-fly decision making for data intensive challenges. Reinforcement learning (RL) is a domain of AI that holds the potential to enable autonomous operations in a feedback loop between beamline experiments and trained agents. Here, we outline the advanced data acquisition and control software of the Bluesky suite, and demonstrate its functionality with a canonical RL problem: cartpole. We then extend these methods to efficient use of beamline resources by using RL to develop an optimal measurement strategy for samples with different scattering characteristics. The RL agents converge on the empirically optimal policy when under-constrained with time. When resource limited, the agents outperform a naive or sequential measurement strategy, often by a factor of 100%. We interface these methods directly with the data storage and provenance technologies at the National Synchrotron Light Source II, thus demonstrating the potential for RL to increase the scientific output of beamlines, and layout the framework for how to achieve this impact.

36 MATERIALS SCIENCE↗

Quantum measurements of atoms using cavity QED

Generalized quantum measurements are an important extension of projective or von Neumann measurements in that they can be used to describe any measurement that can be implemented on a quantum system. We describe how to realize two nonstandard quantum measurements using cavity QED. The first measurement optimally and unambiguously distinguishes between two nonorthogonal quantum states. The second example is a measurement that demonstrates superadditive quantum coding gain. The experimental tools used are single-atom unitary operations effected by Ramsey pulses and two-atom Tavis-Cummings interactions. We show how the superadditive quantum coding gain is affected by errors in the field-ionization detection of atoms and that even with rather high levels of experimental imperfections, a reasonable amount of superadditivity can still be seen. To date, these types of measurements have been realized only on photons. It would be of great interest to have realizations using other physical systems. This is for fundamental reasons but also since quantum coding gain in general increases with code word length, and a realization using atoms could be more easily scaled than existing realizations using photons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Scavenging quantum information: Multiple observations of quantum systems

Given an unknown state of a qudit that has already been measured optimally, can one still extract any information about the original unknown state? Clearly, after a maximally informative measurement, the state of the system collapses into a postmeasurement state from which the same observer cannot obtain further information about the original state of the system. However, the system still encodes a significant amount of information about the original preparation for a second observer who is unaware of the actions of the first one. We study how a series of independent observers can obtain, or can scavenge, information about the unknown state of a system (quantified by the fidelity) when they sequentially measure it. We give closed-form expressions for the estimation fidelity when one or several qudits are available to carry information about the single-qudit state, and we study the classical limit when an arbitrarily large number of observers can obtain (nearly) complete information on the system. In addition to the case where all observers perform most informative measurements, we study the scenario where a finite number of observers estimates the state with equal fidelity, regardless of their position in the measurement sequence and the scenario where all observers use identical measurement apparatuses (up to a mutually unknown orientation) chosen so that a particular observer's estimation fidelity is maximized.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Future of Radionuclide Aerosol Monitoring Systems

In the 1990s, Pacific Northwest National Laboratory staff developed the Radionuclide Aerosol Sampler Analyzer (RASA) for worldwide aerosol monitoring. RASA won an R&D 100 award in 1998 and a Federal Laboratory Consortium tech transfer award in 2000. For the last several years, staff of PNNL and Creare have made investigations into aspects of upgrading the RASA. Key themes have been a modular approach to additional radionuclide measurements, optimizing the sampling/analyzing times to improve detection and location capability, and improving the power consumption via the use of electrostatic collection versus classic filtration. These individual efforts have been made in the context of retrofits to the existing RASA. In in this work, we consider a complete RASA redesign at a notional level. Individual studies reported here contain theory and experimental investigations, but none of these has been tested with the others, and further work is needed to verify these gains. With these caveats, this work shows that substantial optimization of detection and location capability of a network of RASA systems is possible, multiple mission spaces can be addressed with additional measurements, and electrostatic collection is a practical advantage, although more work is needed. The quite unexpected result of this study is that some optimization of the existing RASA is possible without any hardware changes at all.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗