Search NASA⌕ Search

SEARCH · Search NASA

Results for “Meshkov”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Elucidating size effects on the yield strength of single-crystal Cu via the Richtmyer–Meshkov instability

Capturing the dynamic response of a material under high strain-rate deformation often demands challenging and time consuming experimental effort. While shock hydrodynamic simulation methods can aid in this area, a priori characterizations of the material strength under shock loading and spall failure are needed in order to parameterize constitutive models needed for these computational tools. Moreover, parameterizations of strain-rate-dependent strength models are needed to capture the full suite of Richtmyer–Meshkov instability (RMI) behavior of shock compressed metals, creating an unrealistic demand for these training data solely on experiments. Herein, we sweep a large range of geometric, crystallographic, and shock conditions within molecular dynamics (MD) simulations and demonstrate the breadth of RMI in Cu that can be captured from the atomic scale. In this work, yield strength measurements from jetted and arrested material from a sinusoidal surface perturbation were quantified as Y RMI = 0.787 ± 0.374 GPa, higher than strain-rate-independent models used in experimentally matched hydrodynamic simulations. Defect-free, single-crystal Cu samples used in MD will overestimate Y RMI , but the drastic scale difference between experiment and MD is highlighted by high confidence neighborhood clustering predictions of RMI characterizations, yielding incorrect classifications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Studying the Richtmyer–Meshkov instability in convergent geometry under high energy density conditions using the Decel platform

The “Decel” platform at Sandia National Laboratories investigates the Richtmyer–Meshkov instability (RMI) in converging geometry under high energy density conditions [Knapp et al., Phys. Plasmas 27, 092707 (2020)]. In Decel, the Z machine magnetically implodes a cylindrical beryllium liner filled with liquid deuterium, launching a converging shock toward an on-axis beryllium rod machined with sinusoidal perturbations. The passage of the shock deposits vorticity along the Be/D2 interface, causing the perturbations to grow. Here, we present platform improvements along with recent experimental results. To improve the stability of the imploding liner to the magneto Rayleigh–Taylor instability, we modified its acceleration history by shortening the Z electrical current pulse. Next, we introduce a “split rod” configuration that allows two axial modes to be fielded simultaneously in different axial locations along the rod, doubling our data per experiment. We then demonstrate that asymmetric slots in the return current structure modify the magnetic drive pressure on the surface of the liner, advancing the evolution on one side of the rod by multiple ns compared to its 180° counterpart. This effectively enables two snapshots of the instability at different stages of evolution per radiograph with small deviations of the cross-sectional profile of the rod from the circular. Using this platform, we acquired RMI data at 272 and 157 μm wavelengths during the single shock stage. Finally, we demonstrate the utility of these data for benchmarking simulations by comparing calculations using ALEGRA MHD and RageRunner.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Non-Richtmyer–Meshkov instability ejecta production based on shallow bubble collapse

The study of shock-driven ejecta production has focused on Richtmyer–Meshkov instability (RMI) growth from geometric features of the material surface. Extensive study of this mechanism under both single- and multiple-shock conditions has found that the ejected mass tends to be closely associated with the shocked surface phase, and its temperature is not dramatically greater than the hydrodynamic shock temperature of the bulk. In this work, we propose and demonstrate a new ejecta production mechanism that can occur under multiple-shock conditions based on the collapse of bubbles near the free surface of the material. This mechanism produces ejected mass that is much greater in quantity than observed in the RMI case. The particles are much hotter than predicted by the shock Hugoniot state, and the ejected mass does not appear to be strongly dependent upon initial surface finish. The ejecta source extends into the material with no clear remaining free surface. We name this mechanism Shallow Bubble Collapse (SBC) and discuss the conditions under which it activates. We demonstrate resolved modeling methods that enable the calculation, design, and study of SBC as a mechanism and perform a series of experiments to compare with the models. Under some multiple-shock conditions, SBC ejection produces ten times more ejected mass than RMI growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Synchrotron radiography of Richtmyer–Meshkov instability driven by exploding wire arrays

We present a new technique for the investigation of shock-driven hydrodynamic phenomena in gases, liquids, and solids in arbitrary geometries. The technique consists of a pulsed power-driven resistive wire array explosion in combination with multi-MHz synchrotron radiography. Compared to commonly used techniques, it offers multiple advantages: (1) the shockwave geometry can be shaped to the requirements of the experiment, (2) the pressure (P > 300 MPa) generated by the exploding wires enables the use of liquid and solid hydrodynamic targets with well-characterized initial conditions (ICs), (3) the multi-MHz radiography enables data acquisition to occur within a single experiment, eliminating uncertainties regarding repeatability of the ICs and subsequent dynamics, and (4) the radiographic measurements enable estimation of compression ratios from the x-ray attenuation. In addition, the use of a synchrotron x-ray source allows the hydrodynamic samples to be volumetrically characterized at a high spatial resolution with synchrotron-based microtomography. This experimental technique is demonstrated by performing a planar Richtmyer–Meshkov instability (RMI) experiment on an aerogel–water interface characterized by Atwood number A0∼−0.8 and Mach number M∼1.5. The qualitative and quantitative features of the experiment are discussed, including the energy deposition into the exploding wires, shockwave generation, compression of the interface, startup phase of the instability, and asymptotic growth consistent with Richtmyer's impulsive theory. Additional effects unique to liquids and solids—such as cavitation bubbles caused by rarefaction flows or initial jetting due to small perturbations—are observed. It is also demonstrated that the technique is not shape dependent by driving a cylindrically convergent RMI experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Modification of Richtmyer–Meshkov instabilities via layered explosive charge design

In this numerical study, we investigate the effects of layered high explosive (HE) charge design on Richtmyer–Meshkov instability (RMI) in metal plates with sinusoidal surface features. The detonation wave from the HE induces a shock in the metal target that subsequently interacts with the surface features; this results in vortex formation and ultimately RMI. Here, we seek to modify RMI by altering the detonation wave characteristics. The modification is investigated in a twofold manner: first, by varying the initial design of the unconfined surface of the target and second, by varying the charge design and composition. Within a limited scope of this design space, a wide variety of behaviors related to RMI growth are observed. Mechanistic actions, including exaggerated front curvature, behind these modifications are proposed. Charge designs, which modify RMI the most for a select target design, are then presented.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2024

Simulations of three-layer Richtmyer–Meshkov mixing in a shock tube

Here, the Richtmyer–Meshkov instability causes perturbations to grow after a shock traverses a fluid density interface. This increases the mixing rate between fluid from either side of the interface. We use the Flash Eulerian hydrodynamic code to investigate alterations when a thin third layer of intermediate density is placed along the interface, effectively creating two adjacent unstable interfaces. This is a common occurrence in engineering applications where a thin barrier initially separates two materials. We find that the width of the mixing layer is similar or slightly reduced; however, the total mass of mixed material can actually increase. The mixing layer becomes more compact and efficient. However, the normalized mixed mass decreases, meaning that finger entrainment becomes more important than in the simple two-layer case. The effect of adding the central layer appears to decrease when the Atwood number is decreased. The Flash results are also benchmarked against two-layer experimental data from a shock tube at the University of Arizona.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Analysis of single-mode Richtmyer–Meshkov instability using high-order incompressible vorticity-streamfunction and shock-capturing simulations

In this study, two- and three-dimensional simulation results obtained using a new high-order incompressible, variable-density vorticity–streamfunction (VS) method and data from previous ninth-order weighted essentially nonoscillatory (WENO) shock-capturing simulations are used to investigate the nonlinear dynamics of single-mode Richtmyer–Meshkov instability using a model of a Mach 1.3 air(acetone)/SF6 shock tube experiment. A comparison of the density fields from both simulations with the experimental images demonstrates very good agreement in the large-scale structure with both methods but differences in the small-scale structure. The WENO method captures the small-scale disordered structure observed in the experiment, while the VS method partially captures such structure and yields a strong rotating core. The perturbation amplitude growth from the simulations generally agrees well with the experiment. The simulation bubble and spike amplitudes agree well at early times. At later times, the WENO bubble amplitude is smaller than the VS amplitude and vice versa for the spike amplitude. The predictions of nonlinear single-mode instability growth models are shown to agree with the simulation amplitudes at early-to-intermediate times but underpredict the amplitudes at later times in the nonlinear regime. Visualizations of the mass fraction and enstrophy isosurfaces, velocity and vorticity fields, and baroclinic vorticity production and vortex stretching terms from the three-dimensional simulations indicate that, with the exception of the small-scale structure within the rollups, the VS and WENO results are in good agreement.

42 ENGINEERING↗
DOE OSTI2024

Shock tube experiments on the three-layer Richtmyer–Meshkov instability

Here, a vertical shock tube is used for experiments on the three-layer Richtmyer–Meshkov instability. Two closely spaced membrane-less interfaces are formed by the flow of two different sects of three gases: one with air above CO 2 above SF 6 and the other with helium above air above SF 6 . The lightest of the three gases enters the shock tube at the top of the driven section and flows downward. Conversely, the heaviest gas enters at the bottom of the shock tube and flows upward while the intermediate density gas enters at the middle through porous plates. All three gases are allowed to escape through holes at the layer location, leaving an approximately 30-mm layer of intermediate-density gas suspended between the lightest gas from above and the heaviest gas from below. A single-mode, two-dimensional initial perturbation is then imposed on the lower interface by oscillating the shock tube in the horizontal direction. The flow is visualized by seeding the intermediate gas with particles and illuminating it with a pulsed laser. Image sequences are then captured using high-speed video cameras. Perturbation amplitude measurements are made from the three-layer system and compared with measurements from 2, two-layer systems. It is observed that the presence of the upper, initially flat interface produces a decrease in growth of instability amplitude in the nonlinear phase over an equivalent single-interface configuration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Shock tube simulations for the three-layer Richtmyer–Meshkov instability with single-mode and multimode perturbations

While the canonical two-component, single-mode Richtmyer–Meshkov instability (RMI) has been extensively studied, relatively less work has focused on the effects of an additional intermediate-density middle layer. This work investigates such three-material RMI configurations at two Atwood number scenarios using the ARES hydrodynamics code. After validation against previous experimental and computational studies, setups corresponding to recent three-layer shock tube experiments are simulated. Cases with both single-mode and multimode perturbations are studied to quantify mixing across the interface between the materials with highest and intermediate density. In particular, this work is able to comprehensibly examine differences between two- and three-dimensional setups for the single-mode and multimode problems. Observations from previous two-layer investigations still apply in the three-layer setup, but over the time horizons considered, there appears to be insufficient nonlinear mode coupling to create significant differences between two- and three-dimensional simulations following the first passage of a shock. Finally, additional reshock simulations have additional nonlinear growth that does result in expected differences between two- and three-dimensional cases in this three-layer setup, but significant differences do not manifest during the time horizon studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Temporal evolution of scalar modes in Richtmyer–Meshkov instability of inclined interface using high-speed PIV and PLIF measurements at 60 kHz

Abstract The current work presents simultaneous, high-speed measurements at 60,000 fields per second of velocity and mole fraction using particle image velocimetry (PIV) and planar laser induced acetone-fluorescence in a Richtmyer–Meshkov instability of an inclined interface (Atwood number, At = 0.22). Specifically, around 2 ms of temporal evolution of the vortex structures and their associated scalar modes immediately following the interface-reshock interaction is presented. Two initial interface conditions are discussed—(a) a sharp, inclined ‘single mode’ interface and (b) a ‘multi-mode’ interface where small perturbations are imposed on the single mode case. A 2D wavelet decomposition of the scalar flow field shows a highly intermittent distribution of small-scale variance throughout the interface even at late times. These are correlated strongly with the vortex structures and local turbulence intensity, where each small-scale scalar mode is sandwiched between two co-rotating vortex structures. This indicates that the interstitial regions between the vortices are significant hotspots of entrainment, which is then dispersed by the induced, counter-flow velocity fields. The multimode case demonstrates similar organization at large scales, while the scalar field is much more homogeneous at smaller scales. These observations highlight the importance of capturing the early time vortex evolution to accurately estimate any late time intermittency, especially where deposition of intense vorticity on sharp interfaces is present.

Engineering↗
DOE OSTI2026

Passive Freeze-Out of the Richtmyer-Meshkov Instability

The Richtmyer-Meshkov instability (RMI) poses a major challenge in inertial confinement fusion (ICF) due to its role in mixing and performance degradation. We report the first experimental observation of passive freeze-out of RMI in a low-pressure surrogate regime, an instability stagnation effect induced without modifying the driving pressure pulse or the target surface geometry. Using additively manufactured subsurface voids in a sinusoidal target, we convert a single shock into a sequence of weaker shocks that suppress instability growth upstream of the surface by over 70%. High-speed x-ray imaging and hydrodynamic simulations suggest that this suppression arises primarily from temporal shaping, with lesser contributions from spatial curvature and shock weakening. Our results demonstrate a driver-independent pathway for controlling shock-driven hydrodynamic instabilities relevant to ICF and other high energy density systems.

Materials science↗
DOE OSTI2021

Benchmarking near-term quantum devices with the variational quantum eigensolver and the Lipkin-Meshkov-Glick model

The variational quantum eigensolver is a promising algorithm for noisy intermediate scale quantum (NISQ) computation. Verification and validation of NISQ algorithms' performance on NISQ devices is an important task. Here, we consider the exactly diagonalizable Lipkin-Meshkov-Glick (LMG) model as a candidate for benchmarking NISQ computers. We use the Bethe Ansatz to construct eigenstates of the trigonometric LMG model using quantum circuits inspired by the LMG's underlying algebraic structure. We construct circuits with depth $\mathcal{O}$(N) and $\mathcal{O}$(log 2 N) that can prepare any trigonometric LMG eigenstate of N particles. The number of gates required for both circuits is $\mathcal{O}$(N). The energies of the eigenstates can then be measured and compared to the exactly known answers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Low viscosity of solid MgO at high pressures and strain rates measured using the laser-driven Richtmyer-Meshkov instability

Solids are often assumed to behave as viscous fluids under high-strain rates. This behavior has been studied experimentally in metals but largely unexplored in brittle ceramic materials. Here, in this study, we present a technique for measuring the viscosity of MgO using time-resolved velocimetry to track the growth rate of a perturbation caused by the Richtmyer-Meshkov instability at the OMEGA EP laser facility. To interpret the results, we use an in-house Eulerian hydrocode to simulate our experiments and model the plastic deformation of solid MgO as a viscous fluid. Results indicate that MgO has a surprisingly low upper bound to its effective viscosity of ∼10 2 ⁢ Pa s at 175 ± 15⁢ GPa, ∼3500⁢K, and 10 6 −10 7 s −1 strain rate.

Perez, Tyler M. [Johns Hopkins Univ., Baltimore, M↗
DOE OSTI2023

Quantum simulations in effective model spaces: Hamiltonian-learning variational quantum eigensolver using digital quantum computers and application to the Lipkin-Meshkov-Glick model

Quantum simulations offer the potential to predict the structure and dynamics of nuclear many-body systems that are beyond the capabilities of classical computing. Generally, preparing the ground state of strongly-interacting many-body systems relevant to nuclear physics is however inefficient, even using ideal quantum computers. In addition, currently available NISQ-era quantum devices possess modest numbers of qubits, limiting the size of quantum many-body systems that can be simulated. In this context, a reformulation of the quantum many-body problems using truncated model spaces and Hamiltonians is desirable to make them more amenable to near-term quantum computers. The importance of symmetries in low-energy theories, including effective field theories (EFTs), lattice quantum chromodynamics (QCD), and effective model spaces for nuclear systems, in particular their interplay with the reduction of active Hilbert spaces, is well known. Lesser known is the fact that the non-commutivity of some symmetries and truncations of the model space can be profitably combined with variational calculations to rearrange the entanglement into localized structures and enable more efficient simulations. Here, the goal of the present study is to explore and utilize the non-commutivity of symmetries and model-space truncations of quantum many-body systems important to nuclear physics, particularly in combination with variational algorithms for quantum simulations and effective Hamiltonian learning. We introduce an iterative hybrid classical-quantum algorithm, Hamiltonian learning variational quantum eigensolver (HL-VQE), that simultaneously optimizes an effective Hamiltonian, thereby rearranging entanglement into the effective model space, and the associated ground-state wavefunction. Quantum simulations, using classical computers and IBM's superconducting-qubit quantum computers, are performed to demonstrate the HL-VQE algorithm, in the context of the Lipkin-Meshkov-Glick (LMG) model of interacting fermions, where the Hamiltonian transformation corresponds to an orbital rotation. We use a mapping where the number of qubits scales with the $\log$ of the size of the effective model space, rather than the particle number. HL-VQE is found to provide an exponential improvement in LMG-model calculations of the ground-state energy and wavefunction, compared to naive truncations without Hamiltonian learning, throughout a significant fraction of the Hilbert space. In the context of EFT, this corresponds to counterterms scaling exponentially with the cut-off as opposed to power law. Implementations on IBM's QExperience quantum computers and simulators for 1- and 2-qubit effective model spaces are shown to provide accurate and precise results, reproducing classical predictions. For a range of parameters defining the LMG model, the HL-VQE algorithm is found to have better scaling of quantum resources requirements than previously explored algorithms. In particular, the HL-VQE scales efficiently over a large fraction of the model space, in contrast to VQE alone. This work constitutes a step in the development of entanglement-driven quantum algorithms for descriptions of nuclear many-body systems. This, in part, leverages the potential of noisy intermediate-scale quantum (NISQ) devices. The exponential scaling of counterterms observed in this study suggests the possibility of more general applicability to other non-perturbative EFTs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Exact, approximate, and hybrid treatments of viscous Rayleigh-Taylor and Richtmyer-Meshkov instabilities

We consider Rayleigh-Taylor and Richtmyer-Meshkov instabilities at the interface between two fluids, one or both of which may be viscous. We derive exact analytic expressions for the amplitude η(t) in the linear regime when only one of the fluids is viscous. The more general case is solved numerically using Laplace transforms. We compare the exact solutions of the initial-value problem with the approximate solutions of the eigenvalue problem used in a simple expression for η(t) in terms of two growth rates, γ+ and γ-. We then propose a hybrid model as an improvement on the approximate model. The hybrid model is based on the same expression for η(t) in terms of γ± but uses exact eigenvalues for γ+, the larger growth rate, and a relationship between γ- and γ+. We also discuss two concepts: isogrowth wave number pairs and asymptotic decay. The first relies on viscosity in one or both fluids to identify perturbations of two different wavelengths having the same γ+. The second concept, which is more general, can be found in viscous as well as inviscid fluids and requires only a specific initial growth rate $\dot{η}$$critical\atop{0}$ to force η(t) → 0 as t → ∞. We present several examples illustrating these two concepts and comparing exact, approximate, and hybrid treatments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

High-resolution Navier-Stokes simulations of Richtmyer-Meshkov instability with reshock

The interaction of a Mach-1.45 shock wave with a perturbed planar interface between sulfur hexafluoride and air is studied through high-resolution two-dimensional (2D) and three-dimensional (3D) shock-capturing adaptive mesh refinement simulations of multispecies Navier-Stokes equations. The sensitivities of time-dependent statistics on grid resolution for 2D and 3D simulations are evaluated to ensure the accuracy of the results. Here, the numerical results are used to examine the differences between the development of 2D and 3D Richtmyer-Meshkov instability during two different stages: (1) initial growth of hydrodynamic instability from multimode perturbations after first shock and (2) transition to chaotic or turbulent state after reshock. The effects of the Reynolds number on the mixing in 3D simulations are also studied through varying the transport coefficients.

42 ENGINEERING↗
DOE OSTI2022

Three-dimensional simulations of reshocked inclined Richtmyer-Meshkov instability: Effects of initial perturbations

The effect of initial perturbations on the evolution of the inclined Richtmyer-Meshkov turbulent mixing layer before and after reshock initiated by a shock wave with Mach number 1.55 is investigated through three-dimensional (3D) simulations using the flash code. The 3D simulations aim to reproduce both predominantly single-mode and multimode interfaces between light and heavy gases (N 2 -CO 2 , Atwood number, A≈0.22; amplitude to wavelength ratio of 0.088) which were created in an inclined shock tube facility to analyze the effects of initial conditions on mixing development in the entire flow field. The two-dimensional center slices of 3D simulations are compared with the experimental results to validate the computational code. Mixing width, mixed mass, mixed-mass thickness, and circulation in addition to concentration fields are shown to be in good agreement with the experimental data. The three-dimensional density and vorticity fields are first presented to qualitatively describe the flow behavior before and after reshock. Several measured density/velocity-related quantities indicate that the growth of the mixing material is strongly dependent on initial conditions. Before reshock and at early times after reshock, flow is clearly maintaining the memory of initial perturbations. However, at late time after reshock, although the large wavelength feature still dominates the flow motion, and the morphology of the two different interfaces indicates several differences, by breakdown of large-scale coherent structures to much finer scales, the memory of small scales of the multimode initial perturbation is not as clear as pre-reshock. Regarding three-dimensionality of the flow, before reshock in the multimode case, the baroclinic vorticity production, circulation, turbulent kinetic energy, and turbulent mass flux suggest that the small-scale roll-up features along the large inclined wavelength quickly evolves in all three dimensions. The coherent vortex tubes break down to smaller wormlike vortex structures, and turbulent fluctuations in the out-of-plane dimension are comparable to the spanwise direction. After reshock, this three-dimensionality of mixing growth was observed in the flow for both initial conditions. The results of this work represent a significant extension of previous computational studies performed on this specific topic. A different code with a different numerical method is validated through comparison with the experimental data. The initial perturbations are directly measured from the experimental results. Moreover, the entire three-dimensional experimental shock tube domain is simulated, and more quantities are investigated to understand the mixing mechanism and instability evolution in all three dimensions.

42 ENGINEERING↗
DOE OSTI2024

Suppression of Richtmyer-Meshkov Instability via Special Pairs of Shocks and Phase Transitions

The classical Richtmyer-Meshkov instability (RMI) is a hydrodynamic instability characterizing the evolution of an interface following shock loading. In contrast to other hydrodynamic instabilities such as Rayleigh-Taylor, it is known for being unconditionally unstable: regardless of the direction of shock passage, any deviations from a flat interface will be amplified. In this article, we show that for negative Atwood numbers, there exist special sequences of shocks which result in a nearly perfectly suppressed instability growth. Here, we demonstrate this principle computationally and experimentally with stepped fliers and phase transition materials. A fascinating immediate corollary is that in specific instances, a phase-transitioning material may self-suppress RMI.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗