Search NASA⌕ Search

SEARCH · Search NASA

Results for “Metal oxide nanoparticles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Hydrothermally and thermally stable catalytic materials based on theta-alumina

A material and a method of making hydrothermally stable (catalytic) materials on the basis of theta-alumina support that is thermally and hydrothermally stable up to 1,150 C with metal, mixed metal-, metal-oxide nanoparticles dispersed upon it. Such materials did not lose significant amounts of their catalytic activity at temperature ranges for industrially relevant applications (including hydrocarbon oxidation, nitric oxide reduction, carbon monoxide oxidation) even after hydrothermal aging up to 1,150° C.

Khivantsev, Konstantin↗
DOE OSTI2021

Tuning Point Defects by Elastic Strain Modulates Nanoparticle Exsolution on Perovskite Oxides

Exsolution generates stable and catalytically active metal nanoparticles via phase precipitation out of a host oxide. An ability to control the size and dispersion of the exsolution particles is desirable for design of nanostructured (electro)catalysts. In this work, we demonstrate that tuning point defects by lattice strain affects both the thermodynamics and the kinetics of iron (Fe 0 ) exsolution on La 0.6 Sr 0.4 FeO 3 (LSF) thin film model. By combining in situ surface characterization and ab initio defect modeling, we show oxygen vacancy and Schottky defects to be the primary point defects formed upon Fe0 exsolution. Lattice strain tunes the formation energy, and thus the abundance of these defects, and alters the amount and size of the resulting exsolution particles. In addition, we find that the density of exsolved nanoparticles matches the concentration of oxygen vacancy pairs, thus pointing to the surface oxygen vacancy pairs as preferential nucleation sites for exsolution. The tensile-strained LSF with a facile formation of these critical point defects results in a higher Fe 0 metal concentration, a larger density of nanoparticles, and a reduced particle size at its surfaces. These results provide important mechanistic insights and highlight the role of point-defect engineering in designing nanostructured catalysts in energy and fuel conversion technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Formation of Bimetallic Nanoparticles via Exsolution Using a Reducible Metal Oxide Capping Layer

Bimetallic nanoparticles are promising catalysts that can improve performance in heterogeneous catalysis and solid-state electrochemistry. Exsolution is a useful method for forming such nanoparticles; however, it is limited by the elements present within the host oxide lattice. Here, in this work, we develop and demonstrate a strategy to form bimetallic particles from La 0.5 Sr 0.5 Ti 0.94 Ni 0.06 O 3 (LSTN) exsolution and using a reducible SnO 2 capping layer, expanding the range of elements available for bimetallic nanoparticle formation. Using this capping layer strategy, we formed nickel–tin (Ni 0 –Sn 0 ) bimetallic nanoparticles via exsolution. We used in situ near-ambient pressure X-ray photoelectron spectroscopy to monitor surface chemical changes during exsolution, showing that first, SnO 2 volatilized. This SnO 2 loss exposed the perovskite surface of LSTN to reducing conditions, which induced Ni exsolution, and compounded with SnO 2 reduction led to the formation of bimetallic Ni 0 –Sn 0 particles. To evaluate the associated microstructural evolution, we measured grazing incidence small-angle X-ray scattering (GISAXS), which confirmed the loss of the SnO 2 capping layer, and scattering simulations suggested the formation of bimetallic particles. We confirmed the bimetallic nanoparticle composition and morphology by Auger spectroscopy and scanning transmission electron microscopy. The resulting bimetallic nanoparticles were smaller and more thermally stable than the monometallic Ni counterparts on LSTN. This capping layer and exsolution approach allow synthesizing multimetallic nanoparticles and can be applied to other reducible metal oxides and perovskite hosts, broadening the compositional space for advanced catalytic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Modification of Catalytic Properties of Hollandite Manganese Oxide by Ag Intercalation for Oxidative Acetalization of Ethanol to Diethoxyethane

The effect of addition of Ag to the catalytic properties of hollandite manganese oxide (HMO) was investigated for the oxidative acetalization of ethanol to diethoxyethane. Based on analysis with HRTEM, XRD, and EXAFS, Ag introduced onto HMO by deposition/precipitation was found to be present in different forms in the final catalyst depending on the calcination temperature. It could exist as nanoparticles on the outside surface of HMO nanorods for samples calcined at 60 °C, and as Ag atoms intercalated into the tunnels of the HMO structure for samples calcined at 500 °C. NH 3 desorption results showed that intercalation of Ag resulted in stronger Lewis acidic sites on HMO, which DFT computational results suggested to be due to Ag-induced electron redistribution in the HMO framework. Here, the intercalation of Ag atoms also made the HMO more easily reducible by lowering the H 2 reduction temperature from 500 to 200 °C. Consequently, the sample with intercalated Ag was more active for ethanol oxidation to acetaldehyde, achieving nearly 100% conversion of ethanol and acetaldehyde by 360 °C, and acetalization of acetaldehyde with ethanol to produce diethoxyethane selectively, resulting in 93.5% diethoxyethane yield, which was 10% higher than with samples containing Ag nanoparticles on HMO. This study demonstrated a little-studied phenomenon in which a metal alters the catalytic properties of an oxide electronically but not structurally and without direct participation in the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Exploring Atomic-Scale Interactions at the Interface of Reducible Oxide and Ruthenium Nanocatalyst for Ammonia Decomposition

Restructuring atomic-scale interfaces between noble metal nanoparticles and metal oxides provides a promising approach to enhancing catalytic properties. In this study, Ru nanoparticles were supported on CeO 2 , ZrO 2 , and HfO 2 via pyrolysis of MOFs under oxygen-suppressed high-temperature conditions. Despite its nearly ideal particle size (∼2.3 nm), the Ru–CeO 2 /C catalyst exhibited the lowest ammonia decomposition activity. X-ray absorption spectroscopy and DFT calculations revealed that electron transfer from Ru to CeO 2 formed positively charged Ru and partially reduced Ce 4+ , weakening the catalytic performance. In contrast, oxygen-deficient ZrO 2 and HfO 2 support donated electrons to Ru, preserving its metallic state. These findings demonstrate that the reducibility of oxide supports governs the direction and magnitude of interfacial charge transfer, directly tuning catalytic behavior. This study provides insights into the design of oxide-supported Ru catalysts for ammonia decomposition.

Catalysts↗
DOE OSTI2025

Ultrafast Photoflash Synthesis of High-Entropy Oxide Nanoparticles

High-entropy metal oxides (HEOs) have recently received growing attention for broad energy conversion and storage applications due to their tunable properties. HEOs typically involve the combination of multiple metal cations in a single oxide lattice, thus bringing distinctive structures, controllable elemental composition, and tunable functional properties. Many synthesis methods for HEOs have been reported, such as solid-state reactions and carbon thermal shock methods. These methods frequently are energy-intensive or require relatively expensive heating equipment. In this work, we report an ultrafast photoflash synthesis method for HEO nanoparticles on diverse substrates. The energy input is provided by a commercial Xe photoflash unit, which triggers exothermic reactions to convert metal salt precursors to HEO nanoparticles within tens of milliseconds. The formation of HEO nanoparticles is attributed to the ultrafast heating (∼106 K/s) and cooling (∼105 K/s) rates of the photoflash and overall high temperature (>1000 K) during the ultrafast synthesis process. When the synthesized CoNiFeCrMn oxide (HEO) is tested as an oxygen evolution reaction electrocatalyst, it shows similar activity to similar materials prepared by other methods. We believe this photoflash synthesis provides a simple method for many others to synthesize diverse HEOs and explore their properties and potential applications.

exothermic reaction synthesis↗
DOE OSTI2022

Synthesis and Characterization of Core-Shell Cu-Ru, Cu-Rh, and Cu-Ir Nanoparticles

Optimizing the use of expensive precious metals is critical to developing sustainable and low-cost processes for heterogeneous catalysis or electrochemistry. Here, we report a synthesis method that yields core-shell Cu-Ru, Cu-Rh, and Cu-Ir nanoparticles with the platinum-group metals segregated on the surface. The synthesis of Cu-Ru, Cu-Rh, and Cu-Ir particles allows maximization of the surface area of these metals and improves catalytic performance. Furthermore, the Cu core can be selectively etched to obtain nanoshells of the platinum-group metal components, leading to a further increase in the active surface area. Characterization of the samples was performed with X-ray absorption spectroscopy, X-ray powder diffraction, and ex situ and in situ transmission electron microscopy. CO oxidation was used as a reference reaction: the three core-shell particles and derivatives exhibited promising catalyst performance and stability after redox cycling. Furthermore, these results suggest that this synthesis approach may optimize the use of platinum-group metals in catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Efficient Control of Atom Arrangement in Ternary Metal Chalcogenide Nanoparticles Using Precursor Oxidation State

Controlling both the concentration and the distribution of elements in a given material is often crucial to extracting and optimizing synergistic properties of the various constituents. An interesting class of such multielement materials is metal chalcogenide nanoparticles, which exhibit a wide range of composition-dependent optoelectronic properties including both bandgap-mediated processes and localized surface plasmon resonance properties, each of which is useful in applications ranging from energy conversion to sensing. Because metal chalcogenide nanoparticles can support several different metal elements in a variety of chalcogen lattices, this material class has particularly benefited from the ability to control both atom concentration and atom arrangement to tailor final particle properties. The primary method to access complex, multimetallic chalcogenide particles is via a postsynthetic cation exchange strategy. One-pot syntheses have been less explored to access these complex particles, although this route is desirable for economy and scalability. In this work, we compare the composition and morphology outcomes from cation exchange and one-pot preparation approaches using a Cu/Ag/Se system, which is already known to exhibit both binary and ternary metal chalcogenide phases. We show that at similar concentrations of the two metal cations, initial reaction conditions for the one-pot method yield multicomponent nanoparticles, whereas cation exchange yields homogeneous ternary metal chalcogenide structures. We then show that by tuning the precursor oxidation state for the one-pot method, this approach can be used to access homogeneous ternary metal chalcogenide particles that are similar in atom arrangement to the particles obtained using cation exchange. Taken together, our results demonstrate reliable synthetic methods that yield a variety of controlled compositions and composition morphologies in the Cu/Ag/Se system. Importantly, we demonstrate that this entire collection of architectures can all be accessed via a one-pot method simply by modifying metal precursor chemistry. The mechanistic insights gained and the resulting streamlined syntheses outlined indicate pathways to easily scaled, highly tailorable syntheses for rapid translation into downstream technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Fast Surface Oxygen Release Kinetics Accelerate Nanoparticle Exsolution in Perovskite Oxides

Exsolution is a recent advancement for fabricating oxide-supported metal nanoparticle catalysts via phase precipitation out of a host oxide. A fundamental understanding and control of the exsolution kinetics are needed to engineer exsolved nanoparticles to obtain higher catalytic activity toward clean energy and fuel conversion. Since oxygen release via oxygen vacancy formation in the host oxide is behind oxide reduction and metal exsolution, we hypothesize that the kinetics of metal exsolution should depend on the kinetics of oxygen release, in addition to the kinetics of metal cation diffusion. In this report we probe the surface exsolution kinetics both experimentally and theoretically using thin-film perovskite SrTi 0.65 Fe 0.35 O 3 (STF) as a model system. We quantitatively demonstrated that in this system the surface oxygen release governs the metal nanoparticle exsolution kinetics. As a result, by increasing the oxygen release rate in STF, either by reducing the sample thickness or by increasing the surface reactivity, one can effectively accelerate the Fe 0 exsolution kinetics. Fast oxygen release kinetics in STF not only shortened the prereduction time prior to the exsolution onset, but also increased the total quantity of exsolved Fe 0 over time, which agrees well with the predictions from our analytical kinetic modeling. The consistency between the results obtained from in situ experiments and analytical modeling provides a predictive capability for tailoring exsolution, and highlights the importance of engineering host oxide surface oxygen release kinetics in designing exsolved nanocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dispersion and stability mechanism of Pt nanoparticles on transition-metal oxides

The heterogeneous catalysts of Pt/transition-metal oxides are typically synthesized through calcination at 500 °C, and Pt nanoparticles are uniformly and highly dispersed when hydrogen peroxide (H 2 O 2 ) is applied before calcination. The influence of H 2 O 2 on the dispersion and the stability of Pt nanoparticles on titania-incorporated fumed silica (Pt/Ti–FS) supports was examined using X-ray absorption fine structure (XAFS) measurements at the Pt L 3 and Ti K edges as well as density functional theory (DFT) calculations. The local structural and chemical properties around Pt and Ti atoms of Pt/Ti–FS with and without H 2 O 2 treatment were monitored using in-situ XAFS during heating from room temperature to 500 °C. XAFS revealed that the Pt nanoparticles of H 2 O 2 -Pt/Ti–FS are highly stable and that the Ti atoms of H 2 O 2 -Pt/Ti–FS support form into a distorted-anatase TiO 2 . DFT calculations showed that Pt atoms bond more stably to oxidized–TiO 2 surfaces than they do to bare- and reduced–TiO 2 surfaces. XAFS measurements and DFT calculations clarified that the presence of extra oxygen atoms due to the H 2 O 2 treatment plays a critical role in the strong bonding of Pt atoms to TiO 2 surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Metal–support interactions in metal oxide-supported atomic, cluster, and nanoparticle catalysis

Supported metal catalysts are essential to a plethora of processes in the chemical industry. The overall performance of these catalysts depends strongly on the interaction of adsorbates at the atomic level, which can be manipulated and controlled by the different constituents of the active material (i.e., support and active metal). The description of catalyst activity and the relationship between active constituent and the support, or metal–support interactions (MSI), in heterogeneous (thermo)catalysts is a complex phenomenon with multivariate (dependent and independent) contributions that are difficult to disentangle, both experimentally and theoretically. So-called “strong metal–support interactions” have been reported for several decades and summarized in excellent review articles. However, in recent years, there has been a proliferation of new findings related to atomically dispersed metal sites, metal oxide defects, and, for example, the generation and evolution of MSI under reaction conditions, which has led to the designation of (sub)classifications of MSI deserving to be critically and systematically evaluated. These include dynamic restructuring under alternating redox and reaction conditions, adsorbate-induced MSI, and evidence of strong interactions in oxide-supported metal oxide catalysts. Here, we review recent literature on MSI in oxide-supported metal particles to provide an up-to-date understanding of the underlying physicochemical principles that dominate the observed effects in supported metal atomic, cluster, and nanoparticle catalysts. Critical evaluation of different subclassifications of MSI is provided, along with discussions on the formation mechanisms, theoretical and characterization advances, and tuning strategies to manipulate catalytic reaction performance. We also provide a perspective on the future of the field, and we discuss the analysis of different MSI effects on catalysis quantitatively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Calorimetric Energies and Chemical Potentials of Metal Atoms in Catalytic Nanoparticles on Oxide and Carbon Supports: Improved Size Dependencies and Adhesion Energies

The chemical potential of metal atoms, μM, in supported metal nanoparticles is an important descriptor related to both the catalytic activity and the stability of the nanoparticles. Here, we derive an expression relating μM to the radius of the particle’s contact area with the support and the adhesion energy at the metal/support interface (E adh ) that assumes the particles have the shape of spherical caps but of arbitrary contact angle with the support (θ c ) and includes an empirical correction for the increase in metal surface energy and adhesion energy with decreasing radius of curvature. We then show that, at any assumed contact angle, we can simultaneously fit previously reported measurements of both calorimetric μ M (from heats of metal vapor adsorption during nanoparticle growth by vapor deposition) versus metal coverage data and the He + low-energy ion scattering (LEIS) intensities for the metal and/or support versus metal coverage (using our recently developed spherical cap model for quantitative LEIS intensities), to determine the particle size versus coverage and E adh . Only one choice of contact angle gives a pair of values for contact angle and E adh , which is consistent with the Young–Dupré equation for the equilibrium shape of a spherical particle. At this equilibrium shape, we then applied this spherical cap model (SCM) to reanalyze microcalorimetric metal chemical potentials and LEIS signals versus coverage data for nine metal/support combinations that were previously analyzed by assuming that the particles had the shape of hemispherical caps, i.e., with a contact angle of 90°. We show that this revised approach gives close agreement with the calorimetric and LEIS data; the best-fit contact angles vary from 64 to 84°, correcting the earlier assumption of 90°. Furthermore, these results provide significant accuracy improvements in particle size versus coverage, metal chemical potential versus size and coverage, metal/support adhesion energies and contact angles for Cu, Ag and Au on CeO 2 (111), Ni on MgO(100), Ag on Fe 3 O 4 (111) and TiO 2 (100), and Ag, Ni and Pd on Ni-supported graphene. This revised approach is much more broadly applicable than the earlier hemispherical cap model (HCM).

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2025

Synthesis of Solid-Solution Mn x Zn 1– x O Nanoparticles and their Electrochemical Oxidation of Furfural

Electrochemical valorization of biomass-derived substrates has become a prominent area of research due to its potential to produce value-added products from renewable feedstocks in a more sustainable way. First-row transition metal electrodes are compelling candidates for these conversions due to their stability, abundance, and cost-effectiveness. Herein, we report on the colloidal synthesis of Mn x Zn 1– x O (x = 0.3-0.7) nanoparticles and their electrocatalytic activity towards furfural oxidation. We find that the hindrance of a MnO impurity can be achieved by leveraging the oxidation state of the Mn precursor. The Mn x Zn 1– x O composition closely follows the ratio of precursors, with all the nanoparticles having a wurtzite structure as determined by ICP-MS and PXRD, respectively. XANES and XPS revealed the presence of Mn in different oxidation states with the ratio of these varying based on the composition. When comparing the electrocatalytic activity of the monometallic and bimetallic oxides for furfural oxidation, a decrease in current density was observed with increasing Zn content. We find the Mn x Zn 1– x O nanoparticles favor the formation of the 6 e - oxidation product 5-hydroxy-2(5H)-furanone, while both monometallic oxides primarily yield CO 2 and other deeply oxidized products as the majority pathway. Furthermore, these findings can contribute towards the design and synthesis of more active and selective electrocatalyst.

Aldehydes↗
DOE OSTI2023

Polyoxometalate derivatized metal oxide electrodes

A porous transparent electrode is formed where a film comprising of semiconducting nanoparticles is decorated with polyoxometalates (POMs) bonded to their surfaces. The semiconducting nanoparticles are transparent metal oxide. The semiconducting nanoparticles include tin-doped indium oxide (ITO), fluorine-doped tin oxide (FTO), or titanium dioxide (TiO 2 ). In an embodiment, the POM is [SiW 12 O 40 ]L 4− ; [α-P 2 W 18 O 62 ] 6− ; or [α 2 -P 2 W 17 O 61 ] 10− . The semiconducting nanoparticles bond to the POM through a combination of electrostatic interactions and hydrogen bonds. The porous transparent electrode can be placed in a protonated form or ion-paired with alkali metal cations or tetraalkylammonium cations.

Dares, Christopher J.↗
DOE OSTI2024

Formation of (Rh–Fe)–FeO x Complex Sites Enables Methanol Synthesis from CO 2

Here, we addressed the challenges of designing catalysts for selective CO 2 hydrogenation by incorporating oxide Fe species onto Rh nanoparticles. Nanoscopic FeO x domains created a “reverse catalyst” structure (i.e., a metal oxide supported on a metal) that increased the density of interfacial sites compared to traditional supported catalysts. The contact between the metal nanoparticle and the oxide overlayer induced the formation of a surface Rh-Fe alloy that stabilize methoxy groups while suppressing hydrogenolysis to methane. Sites at FeO x -metal interfaces interact with CO 2 sevenfold stronger than sites on metal surfaces, show larger energy barriers to cleave the C-O bonds, and offer a barrierless pathway for hydrogenation of methoxy species to methanol. Consequently, the multifunctional sites over FeO x /Rh-Fe catalysts highlight and meet the requirements of a selective methanol catalyst: strong interaction with CO 2 to ensure high density of transition states; metal sites to activate and make hydrogen available to surface intermediates; and high energy barriers for C-O bond cleavage to form carbides. These synthesis and catalytic chemistries, demonstrated for Rh-Fe-FeO x interfaces, enable us to overcome the limitations to the design of methanol production catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Role of Oxidizing Conditions in the Dispersion of Supported Platinum Nanoparticles Explored by Ab Initio Modeling

Achieving fine control over the dispersion of supported platinum nanoparticles (Pt) is a promising avenue to enhancing their catalytic activity and selectivity. Experimental observations suggest that exposing ceria-supported Pt nanoparticles to O 2 at 500 °C promotes their dispersion into smaller particles and eventually single atoms. The exact role of oxygen in this process is not yet well understood. Past density functional theory studies of ceria-supported Pt have typically narrowed their scope to single atoms and clusters of a few atoms. Herein, we combine several approaches and types of models in a consistent atomistic framework to evaluate the relative stability of ceria-supported Pt as a function of the degree of oxidation of Pt and of the particle size, ranging from single atoms to nanoparticles 1.5 nm of diameter. Finally, we find that the largest nanoparticles remain the thermodynamically most stable species on the lowest energy facet of ceria even under oxidizing conditions, suggesting that stronger adsorption sites are required to stabilize smaller clusters and single atoms and promote oxidative dispersion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗