Search NASA⌕ Search

SEARCH · Search NASA

Results for “Metamorphism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Development of Lattice-Mismatched GaInAsP for Radiation Hardness

We develop lattice-mismatched GaInAsP as an alternative alloy to pure As-based alloys currently used in III-V multijunction solar cells. Increasing the alloy phosphorous and indium content while maintaining an optimal bandgap may allow high efficiency multijunction devices with increased radiation hardness. Here, 1.0-eV GaInAsP is developed and implemented into single and multijunction solar cell devices. The lattice-mismatched GaInAsP must be grown strain free, and the subcell thickness must be maintained below the thickness where surface-driven phase separation occurs. As observed in transmission electron microscopy and cathodoluminescence imaging, phase separation strengthens in the GaInAsP layer and leads to interfacial defect formation when the cell thickness is too great. We show single junction 1.0-eV Ga 0.5 In 0.5 As 0.7 P 0.3 with excellent carrier collection and a bandgap-voltage offset of 0.40 V. This material quality approaches that of 1.0-eV Ga 0.7 In 0.3 As used in inverted metamorphic multijunction devices, but has increased phosphorus content and consequently is expected to have a higher radiation resistance. We incorporate the 1.0-eV GaInAsP subcell into a 3-junction inverted metamorphic solar cell to test the performance of the subcell in a multijunction. No additional loss is observed upon integration into a multijunction cell: both the carrier collection and voltage of the GaInAsP subcell are unchanged from single junction devices. While further materials development and radiation testing is still required, these preliminary results indicate that lattice-mismatched GaInAsP can be effectively used in multijunction solar cells to replace radiation-soft materials.

14 SOLAR ENERGY↗
DOE OSTI2020

Hf‐W chronology of a macrochondrule from the L5/6 chondrite Northwest Africa 8192

Abstract A large, igneous‐textured, and 2 cm‐sized spherical object from the L5/6 chondrite NWA 8192 was investigated for its chemical composition, petrography, O isotopic composition, and Hf‐W chronology. The petrography and chemical data indicate that this object closely resembles commonly found chondrules in ordinary chondrites and is therefore classified as a “macrochondrule.* As a result of metal loss during its formation, the macrochondrule exhibits elevated Hf/W, which makes it possible to date this object using the short‐lived 182 Hf‐ 182 W system. The Hf‐W data provide a two‐stage model age for metal–silicate fractionation of 1.4 ± 0.6 Ma after Ca‐Al‐rich inclusion (CAI) formation, indicating that the macrochondrule formed coevally to normal‐sized chondrules from ordinary chondrites. By contrast, Hf‐W data for metal from the host chondrite yield a younger model age of ~11 Ma after CAIs. This younger age agrees with Hf‐W ages of other type 5–6 ordinary chondrites, and corresponds to the time of cooling below the Hf‐W closure temperature during thermal metamorphism on the parent body. The Hf‐W model age difference between the macrochondrule and the host metal demonstrates that the Hf‐W systematics of the bulk macrochondrule were not disturbed during thermal metamorphism, and therefore, that the formation age of such objects can still be determined even in strongly metamorphosed samples. Collectively, this study illustrates that chondrule formation was not limited to mm‐size objects, implying that the rarity of macrochondrules reflects either that this process was very inefficient, that subsequent nebular size‐sorting decimated large chondrules, or that large precursors were rare.

58 GEOSCIENCES↗
DOE OSTI2020

Variation of lead isotopic composition and atomic weight in terrestrial materials (IUPAC Technical Report)

The isotopic composition and atomic weight of lead are variable in terrestrial materials because its three heaviest stable isotopes are stable end-products of the radioactive decay of uranium ( 238 U to 206 Pb; 235 U to 207 Pb) and thorium ( 232 Th to 208 Pb). The lightest stable isotope, 204 Pb, is primordial. These variations in isotope ratios and atomic weights provide useful information in many areas of science, including geochronology, archaeology, environmental studies, and forensic science. While elemental lead can serve as an abundant and homogeneous isotopic reference, deviations from the isotope ratios in other lead occurrences limit the accuracy with which a standard atomic weight can be given for lead. In a comprehensive review of several hundred publications and analyses of more than 8000 samples, published isotope data indicate that the lowest reported lead atomic weight of a normal terrestrial materials is 206.1462 ± 0.0028 (k = 2), determined for a growth of the phosphate mineral monazite around a garnet relic from an Archean high-grade metamorphic terrain in north-western Scotland, which contains mostly 206 Pb and almost no 204 Pb. The highest published lead atomic weight is 207.9351 ± 0.0005 (k = 2) for monazite from a micro-inclusion in a garnet relic, also from a high-grade metamorphic terrain in north-western Scotland, which contains almost pure radiogenic 208 Pb. When expressed as an interval, the lead atomic weight is [206.14, 207.94]. It is proposed that a value of 207.2 be adopted for the single lead atomic-weight value for education, commerce, and industry, corresponding to previously published conventional atomic-weight values.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Thermoelastic properties of zircon: Implications for geothermobarometry

Abstract A thermal-pressure equation of state has been determined for zircon (ZrSiO4) that characterizes its thermoelastic behavior at metamorphic conditions. New pressure-volume (P-V) data from a “Mud Tank” zircon have been collected from 1 bar to 8.47(1) GPa using X-ray diffraction, and elastic moduli were measured from room temperature up to 1172 K by resonance ultrasound spectroscopy. These data were fitted simultaneously with temperature-volume (T-V) data from the literature in EosFit7c using a new scaling technique. The parameters of a third-order Birch-Murnaghan EoS with a Mie-Grüneisen-Debye model for thermal pressure have compressional EoS parameters K0T = 224.5(1.2) GPa, K0T' = 4.90(31) with a fixed initial molar volume V0 = 39.26 cm3/mol and thermal parameters γ0 = 0.868(15), q = 2.37(80), and ΘD = 848(38) K. EoS parameters that describe the variation of unit-cell parameters with pressure and temperature were determined using an isothermal-type EoS. This new EoS confirms that zircons are stiffer than garnets and exhibit a much lower thermal expansion. This results in steep isomekes between zircon and garnets, which makes zircon trapped as inclusions in garnets at metamorphic conditions a good piezothermometer.

Geochemistry & Geophysics↗
DOE OSTI2021

Evolution of Pore Structure and Permeability of Rocks Under Hydrothermal Conditions (Final Report)

The physical and transport properties of porous rocks can be altered by a variety of diagenetic, metamorphic, and tectonic processes, and the changes that result are of critical importance to such industrial applications as resource recovery, carbon dioxide sequestration, and waste isolation in geologic formations. The associated interrelationships between rocks, pore fluids and deformation are also key to understanding many natural processes, including dynamic metamorphism, fault mechanics, fault stability and pressure solution creep. In this project, we investigated the changes of permeability and pore geometry owing to inelastic deformation by solution-transfer, brittle fracturing and dislocation creep. In particular, we studied the coupling between pore fluids and deformation in fluid-filled quartz, calcite, mudstones and ultramafic rocks and examine the effects of coupled mechanical and chemical processes on the evolution of porosity and permeability under hydrothermal conditions. The investigations used a combination of techniques, that included triaxial laboratory experiments; uniaxial compressive loading with in situ observations of microstructure; permeability under hydrostatic compression; observations of microstructure using optical and electron microscopes, and micro-CT imaging; and numerical calculations. Laboratory experiments were designed to provide mechanical and transport data under conditions that isolate the particular mechanisms responsible for the changes. The data obtained were used to quantify changes in surface roughness, porosity, pore dimensions and their spatial fluctuations. The results of the experiments and data from image analyses were compared to the results of network, finite-difference and other numerical models to verify the validity of experimentally established relations between permeability and other rock properties. A bibliography for the period from 2015-2019 is appended below. New results obtained in the final year and the unfunded extension period are detailed below.

58 GEOSCIENCES↗
DOE OSTI2024

Effects of Perfluorinated Alkyl Substances (PFAS) on Amphibian Body and Liver Conditions: Is Lipid Metabolism Being Perturbed throughout Metamorphosis?

Per- and polyfluoroalkyl substances (PFAS) may interact with peroxisome proliferator activated receptors (PPARs) and alter lipid homeostasis. Using Xenopus laevis, we investigated the effect of PFAS on (a) lipid homeostasis and whether this correlated to changes in body and hepatic condition; (b) the expression of hepatic genes regulated by PPAR; and (c) the hepatic lipidome. We chronically exposed tadpoles to 0.5 µg/L of either PFOS, PFHxS, PFOA, PFHxA, a binary mixture of PFOS and PFHxS (0.5 µg/L of each), or a control, from NF stage 52 through metamorphic climax. Growth, development, and survival were not affected, but we detected a sex-specific decrease in body condition at NF 66 (6.8%) and in hepatic condition (16.6%) across metamorphic climax for male tadpoles exposed to PFOS. We observed weak evidence for the transient downregulation of apolipoprotein-V (apoa5) at NF 62 in tadpoles exposed to PFHxA. Acyl-CoA oxidase 1 (acox1) was downregulated only in males exposed to PFHxS (Ln(Fold Change) = −0.54). We detected PFAS-specific downregulation of structural glycerophospholipids, while semi-quantitative profiling detected the upregulation in numerous glycerophospholipids, sphingomyelins, and diglycerides. Overall, our findings indicate that PFAS can induce sex-specific effects that change across larval development and metamorphosis. We demonstrate that PFAS alter lipid metabolism at environmentally relevant concentrations through divergent mechanisms that may not be related to PPARs, with an absence of effects on body condition, demonstrating the need for more molecular studies to elucidate mechanisms of PFAS-induced lipid dysregulation in amphibians and in other taxa.

Bushong, Anna (ORCID:0000000249630578)↗
DOE OSTI2024

InP- and GaAs-Based 0.6 eV GaInAs Devices for Thermophotovoltaics and Laser Power Conversion

Emerging applications such as thermal energy grid storage, waste heat recovery and portable power generation require efficient thermophotovoltaic (TPV) converters tuned to temperatures near 1000 Degrees Celsius or below. Metamorphic GaInAs with larger lattice constants than InP present a promising option for these needs. The ability to grow these devices on GaAs substrates instead of more expensive InP would enhance the scalability of these devices. In this talk, we present inverted metamorphic Ga0.3In0.7As photovoltaic converters with sub-0.60 eV bandgaps grown on InP and GaAs substrates. These devices are realized using InAsP or GaInP/InAsP compositionally graded buffers which exhibit threading dislocation densities of 1.3 +/- 0.6 x 106 cm-2 and 8.9 +/- 1.7 x 106 cm-2 on InP and GaAs, respectively. Despite this difference in defect density, the devices generate similar open-circuit voltages of 0.386 V and 0.383 V, respectively, under irradiance producing a short-circuit current density of -10 A/cm2, with bandgap-voltage offsets of 0.20 and 0.21 V. We estimate their thermophotovoltaic efficiency using these measurements coupled with broadband reflectance measurments. The InP-based cell is estimated to yield 1.09 W/cm2 at 1100 Degrees Celsius vs. 0.92 W/cm2 for the GaAs-based cell, with TPV efficiencies of 16.8 vs. 9.2%. Both devices are limited by sub-bandgap absorption, which we assess largely occurs in the graded buffers. We estimate that the 1100 Degrees Celsius thermophotovoltaic efficiencies would increase to 24.0% and 20.7% in structures with the graded buffer removed, if previously demonstrated reflectance is achieved. These devices also have application as laser power converters in the 2.0-2.3 um atmospheric window. We estimate efficiencies of 36.8% and 32.5% under 2.0 um monochromatic irradiance of 1.86 W/cm2 and 2.81 W/cm2, respectively.

ENGINEERING,MATERIALS SCIENCE,SOLAR ENERGY↗
DOE OSTI2021

Dolomites in hydrated fine-grained Antarctic micrometeorites: Effective tools for analyzing secondary processes

We report detailed transmission electron microscope (TEM) observations of carbonates from one hydrated fine-grained Antarctic micrometeorite (H-FgMM). These carbonates show the occurrence of complex chemical variations and microstructures that provide important evidence regarding the formation and evolution of rarely analyzed H-FgMMs. The chemical variations were identified at both micrometer and nanometer scales, indicating that these carbonates formed under localized fluid conditions that suggest a variable chemical microenvironment. Individual carbonates grew from isolated reservoirs of fluid. Moreover, these carbonates contain manganese amounts almost twice as high as those measured in CM chondrites but similar to those identified in CI chondrites. Their particular compositions indicate reducing and progressively evolving conditions in the fluid from which these carbonates precipitated, probably due to water consumption during phyllosilicates formation. In addition to the compositional variability, microstructural features are pervasive in these carbonates, similar to those described in heavily shocked meteorites indicating that these carbonates were probably modified during shock processes after their formation. Since carbonates are highly susceptible to shock metamorphism, we suggest that it is essential to investigate their structure in detail before interpreting the isotopic measurements related to the time of their formation. Additionally, associated with carbonates, ubiquitous phosphates were identified in the micrometeorite analyzed. Future studies of these mineral associations will provide us further insight into the formation and evolution of asteroids, especially since they were both identified in the surface materials of Ryugu and Bennu.

58 GEOSCIENCES↗
DOE OSTI2023

Chronology of alkali anorthosite 14304 clast “b” records basin forming impact at ~3.95 Ga

Alkali-suite rocks constitute one of three major suites of lunar crustal rocks. As such, constraining their formation timescales and petrogenesis is important for understanding the earliest magmatic history of the Moon. However, the magmatic history of alkali-suite rocks is partly obscured by superimposed effects of major basin-forming impact events on the lunar nearside. Consequently, unambiguous crystallization ages of samples from this suite of rocks have not been determined. Here, the aim of this study is to better understand the petrogenetic history of the alkali-suite and the potential superimposed effects of impact metamorphism by determining Sm-Nd, Rb-Sr, and 40 Ar/ 39 Ar ages for an alkali anorthosite clast from Apollo 14 lithic breccia 14304 termed clast “b”. The new chronologic measurements of clast “b” yield concordant Sm-Nd, Rb-Sr, and 40 Ar/ 39 Ar ages of 3947 ± 13 Ma, 3975 ± 34 Ma, and 3937 ± 37 Ma respectively, resulting in a weighted mean age of 3949 ± 11 Ma. This age is not interpreted to date an igneous event related to production of the lunar highlands crust and instead the chronology and petrography of clast “b” are most readily explained by an impact event at ~3.95 Ga that caused near-complete isotopic re-equilibration of the Sm-Nd, Rb-Sr, and 40 Ar/ 39 Ar chronometers. The weighted mean age of 3949 ± 11 Ma of clast “b” is several hundred Ma younger than 4.3–4.4 Ga ages typically determined for samples of other crustal rock suites but in very good agreement with independent estimates for the formation of Imbrium basin ejecta and other marginally older impact events which are thought to have been sampled at the Apollo 14 landing site. Thus, although petrologic and geochemical examination suggest that clast “b” is a pristine igneous clast, its age likely records an impact event at the Apollo 14 landing site. Whereas the various determined ages of clast “b” do not reflect the timescales of alkali-suite magmatism, the relatively low initial Sr and Nd isotopic compositions of clast “b” indicate that its protolith evolved with very low 147 Sm/ 144 Nd and 87 Rb/ 86 Sr that are distinct from estimates for urKREEP but similar to that of lunar plagioclase. This implies that the igneous protolith of clast “b” derived from a plagioclase-dominated KREEP-rich source that must have formed after the formation of the urKREEP source at ~4.35 Ga but well before the impact event recorded by clast “b” at ~3.95 Ga.

58 GEOSCIENCES↗
DOE OSTI2022

Triple-junction solar cells with 39.5% terrestrial and 34.2% space efficiency enabled by thick quantum well superlattices

Multijunction solar cell design is guided by both the theoretical optimal bandgap combination as well as the realistic limitations to materials with these bandgaps. For instance, triple-junction III-V multijunction solar cells commonly use GaAs as a middle cell because of its near-perfect material quality, despite its bandgap being higher than optimal for the global spectrum. Here, we modify the middle cell bandgap using thick GaInAs/GaAsP strain-balanced quantum well (QW) solar cells with excellent voltage and absorption. Additionally, these high-performance QWs are incorporated into a triple-junction inverted metamorphic multijunction device consisting of a GaInP top cell, GaInAs/GaAsP QW middle cell, and lattice-mismatched GaInAs bottom cell, each of which has been highly optimized. We demonstrate triple-junction efficiencies of 39.5% and 34.2% under the AM1.5 global and AM0 space spectra, respectively, and the global efficiency is higher than previous record six-junction devices.

14 SOLAR ENERGY↗
DOE OSTI2020

Measurements of Six-Junction Concentrator Solar Cells

Accurate measurements of six-junction inverted metamorphic concentrator solar cells under AM1.5 direct spectrum are obtained by adjusting the spectrum of a tunable high-intensity solar simulator with custom mirrors. Isotype reference cells and broadband InGaAs QE calibration cells were developed for accurate measurements. Modeling and varying the illumination show that an unavoidable 15% - 17% overillumination on the sixth junction does not result in significant error of these 6J IMM devices. Spectrally adjusted flash measurements are independently confirmed by NREL's Cell and Module Performance team. Concentration measurements of a 6J IMM solar cell resulted in 47.1 ± 3.2% (absolute) efficiency at 143 suns.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2021

In-situ observation of pre-, co- and post-seismic shear slip at 1.5 km depth

Understanding the initiation and arrest of earthquakes is one of the long-standing challenges of seismology. Here we report on direct observations of borehole displacement by a meter-sized shear rupture induced by pressurization of metamorphic rock at 1.5 km depth. We observed the acceleration of sliding, followed by fast co-seismic slip and transient afterslip. Total displacements were about 7, 5.5 and 9.5 micrometers, respectively for the observed pre-slip, co-seismic slip and afterslip. The observed pre-slip lasted about 0.4 seconds. Co-seismic slip was recorded by the 1 kHz displacement recording and a 12-component array of 3-C accelerometers sampled at 100 kHz. The observed afterslip is consistent with analytical models of arrest in a velocity-strengthening region and subsequent stress relaxation. < p >The observed slip vector agrees with the activation of a bedding plane within the phyllite, which is corroborated by relocated seismic events that were observed during the later stages of the injection experiment.

Schoenball, Martin↗
DOE OSTI2025

Initial Conditions of Planet Formation: Time Constraints from Small Bodies and the Lifetime of Reservoirs in the Solar Protoplanetary Disk

This review explores the timescales of the initial phase of planet formation, from nebular dust (CAIs and chondrules) to planetesimal accretion and differentiation, using evidence from meteorite research. Aluminium-Mg systematics of CAIs indicate either an extended period of CAI formation (∼0.3 Ma) or an initial 26 Al heterogeneity, with evidence supporting a homogeneous 26 Al abundance in the protoplanetary disk. Thermal and aqueous alteration on the parent body can disturb the U-Pb and Al-Mg chronometers in chondrules. Focusing on relatively robust isochron data from plagioclase of pristine (types ≤3.05) chondrites indicates a shift in chondrule formation locations, moving from the inner to the outer disk over time. Ages of basaltic achondrites show that silicate differentiation on small bodies was well underway within the first few million years (Ma) of our solar system. Their age record, however, reveals inconsistencies between different chronometers, partly caused by (i) secondary disturbances due to thermal metamorphism, aqueous alteration, or impacts, (ii) the presence of xenolithic minerals, and (iii) potentially variable initial 26 Al abundances due to disturbances at the mineral scale. Nucleosynthetic isotope data indicate that parent bodies of iron and stony meteorites formed in two distinct regions within the protoplanetary disk: the inner, non-carbonaceous (NC) and the outer, carbonaceous (CC) region. Based on Hf-W chronometry it has been demonstrated that NC and CC parent bodies of magmatic iron meteorites segregated their cores within ∼1–3 Ma after CAI formation, implying that parent body accretion occurred within <1 Ma in both reservoirs. Combining accretion ages with nucleosynthetic data further reveals that, at first order, NC and CC reservoirs in the solar protoplanetary disk were established within 1 Ma and existed over several Ma with limited exchange between them. In the CR chondrite accretion region of the disk, planetary bodies formed over at least 3 Ma, while in most other regions, formation spanned at least 1 Ma, with minimal changes in nucleosynthetic isotope compositions. Aerodynamical size sorting of dust likely introduced or amplified some of these variations.

26Al distribution↗
DOE OSTI2026

Fantômas unconfined: global QCD fits with Bézier parameterizations

Fantômas is a C++ toolkit for exploring the parametrization dependence of parton distribution functions (PDFs) and other correlator functions in quantum chromodynamics (QCD). Fantômas facilitates the generation of adaptable polynomial parametrizations for PDFs, called metamorphs, to find best-fit PDF solutions and quantify the epistemic uncertainty associated with the parametrizations during their fitting. The method employs Bézier curves as universal approximators for a variety of PDF shapes. Integrated into the xFitter framework for the global QCD analysis, Fantômas provides a foundation for general models of PDFs, while reducing the computational time compared to the approaches utilizing traditional polynomial parametrizations as well as providing an interpretable alternative to neural-network-based models. This paper outlines the structure and practical usage of the Fantômas toolkit, including its inputs, outputs, and implementation within xFitter. It also provides a practical example of using Fantômas for uncertainty quantification as well as the combination of PDF fits into a single ensemble.

Bézier curves↗
DOE OSTI2020

U-Pb zircon age constraints on the earliest eruptions of the Deccan Large Igneous Province, Malwa Plateau, India

Climate instability driven by emission of volatiles during emplacement of large igneous provinces (LIPs) is frequently invoked as a potential cause of mass extinctions. However, documenting this process in the geologic record requires a holistic understanding of eruption rates, the location of eruptive centers, and potential sources of climate-changing volatiles. We present new chemical abrasion–isotope dilution–thermal ionization mass spectrometry (CA-ID-TIMS) U-Pb zircon geochronology from Malwa Plateau basalts on the northern margin of the Deccan LIP, India. These basalts have been previously interpreted as either an extension of the province's main volcanic stratigraphy or as an independent eruptive center active up to millions of years prior to the main eruptive phase. Our data instead demonstrate that the lower Malwa Plateau basalts are temporally correlative with the first pulse of Deccan volcanism and provide new constraints on its initiation and duration. Paleomagnetic data further indicate that upper Malwa Plateau basalts may be age-equivalent to the second, third, and fourth pulses of Deccan volcanism. The relative thicknesses of age-equivalent packages of basalt are consistent with eruption of the Deccan LIP from a southward-migrating eruptive center. The first eruptive pulse is coeval with a ~200 kyr Late Maastrichtian warming event preserved globally in contemporaneous stratigraphic sections. We propose that the first pulse of Deccan magmatism was more voluminous in the north, where it erupted through organic-rich sedimentary rocks of the Narmada-Tapti rift basin. Thermal metamorphism of these sediments could have been a source of sufficient CO 2 to drive the Late Maastrichtian warming event, which if true would reconcile the apparent dampened warming signals associated with later Deccan eruptive pulses.

58 GEOSCIENCES↗
DOE OSTI2023

Quantifying the effect of late bombardment on terrestrial zircons

The first 500 million years of Earth history is thought to be a period of intense planetary bombardment, but the timing and flux of this meteorite bombardment is poorly understood. In particular, on the basis of an inferred lunar impact history, some workers have hypothesized a ~3.9 Ga terminal cataclysm (TC) in which there was marked increase in the impact flux affecting the Moon, the Earth and possibly other terrestrial planets. Minerals that survived this enigmatic period offer a way to test early planetary bombardment models as they may contain telltale micro- to nanoscale shock features. Here, we present results from a numerical modeling calculation that assesses the probability that a zircon residing in the crust would escape shock melting or shock deformation during a TC bombardment event. Even with conservative pressure estimates for zircon shock deformation and intermediate bombardment intensities, we find that only ~6% of ≥4.0 Ga crust would be expected to survive a 3.9 Ga cataclysm without experiencing either complete melting or zircon shock metamorphism. In this study, we couple this modeling with a search for shock effects in the oldest zircons from the Acasta Gneiss Complex, which would have been present in the Earth's crust during a putative 3.9 Ga TC. Spatially correlated electron and NanoSIMS ion microscopy of 4.02 Ga igneous zircons from Acasta reveals no evidence of ancient shock. These data, together with similar results from other Hadean zircon suites, confirm that a post-Hadean TC is unlikely to have occurred. We suggest that the dearth of pre-3.9 Ga terrestrial crust and zircons is instead best explained by endogenic processes related to the mechanisms of early crust formation. Our modeling allows us to evaluate bombardment scenarios from the terrestrial zircon record by applying probabilistic interpretations to zircon shock deformation data. This approach will be valuable for other planetary bodies, allowing broader conclusions to be drawn from geographically limited datasets.

58 GEOSCIENCES↗
DOE OSTI2025

A microstructural signature of the coesite-quartz transformation: New insights from high-pressure experiments and EBSD

Ultra-high pressure (UHP) metamorphism is difficult to identify in continental crust as few petrological barometers are suitable for dominantly felsic lithologies. In such cases, burial to extreme depths is commonly identified through the preservation of coesite, a high-pressure polymorph of SiO 2 that typically forms at depths exceeding ∼ 100 km (i.e., > 2 GPa pressure). Unfortunately, coesite readily transforms to quartz upon exhumation, meaning that UHP terranes may often be overlooked. While some studies have suggested that quartz may inherit an orientation signature indicative of former coesite, both the specific nature of this signature and the conditions favouring its development remain uncertain. Here, to address this problem, we combine electron backscatter diffraction analysis of natural and experimental samples to explore microstructural evolution across the coesite-quartz phase transformation. We demonstrate that neighbouring domains of quartz commonly feature an 84 ± 4° rotation of [c] axes around the pole of a common {m} plane. This orientation relationship is a product of epitaxy, whereby the {$11\bar{2}2$} Japan twin plane in quartz nucleates on the (010) plane in coesite. In supercell simulations, the nucleation of Japan twins can be explained by the energetically favourable alignment of quartz tetrahedra on parental coesite tetrahedra. Through experiments, we demonstrate that this signature emerges over a broad range of conditions, regardless of the availability of nucleation sites (e.g., grain boundaries) or the density of crystal lattice defects (e.g., dislocations). Overall, our work provides a quantitative and unambiguous tool for identifying UHP terranes from quartz in isolation.

Coesite↗
DOE OSTI2022

Morphological and crystallographic controls in the replacement of calcite and aragonite by cerussite and otavite

Mineral replacement reactions are essential solid-fluid interactions in natural and industrial processes including metasomatism, diagenesis, and metamorphism, and sequestration of metal toxins from polluted water. In this paper, we explore the morphological evolution of aragonite and calcite (polymorphs of CaCO 3 ) during their replacement by cerussite (PbCO 3 , an isomorph of aragonite) and otavite (CdCO 3 , an isomorph of calcite) in acidic aqueous solutions (with initial pH 3 to 4). Observations using scanning electron and synchrotron-based transmission X-ray microscopies reveal the formation of pseudomorphic shells (~5 to 10 µm thick) of cerussite and otavite when Pb 2+ is reacted with either calcite or aragonite and when Cd 2+ is reacted with aragonite. The formation of pore space at the substrate-precipitate interface and within the precipitate is found to be key in promoting chemical exchange between the dissolving phase and the solution. In contrast, minimal reactivity is observed when Cd 2+ is reacted with calcite. These results demonstrate that the lack of substrate-precipitate epitaxy (either because of inconsistent symmetries or due to large lattice constant mismatch) is a critical factor that enables replacement of primary CaCO 3 minerals by Pb- or Cd-bearing secondary minerals while the presence of epitaxial relationships inhibit those reactions. When calcite and aragonite coexist, the replacement of aragonite by cerussite and otavite occurs preferentially over calcite. We postulate that the relative reactivity of calcite and aragonite to Pb 2+ and Cd 2+ can be determined by interplay between morphological and crystallographic properties of CaCO 3 materials as well as solution chemistry. Our results demonstrate that coupled dissolution-precipitation processes of carbonate minerals play an important role in controlling mobility and bioavailability of lead and cadmium in environments where acidic metal-contaminated water interacts with carbonate-rich rocks and soils.

58 GEOSCIENCES↗