Search NASA⌕ Search

SEARCH · Search NASA

Results for “MgB $_{2}$”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High critical field superconductivity at ambient pressure in MoB 2 stabilized in the P6/mmm structure via Nb substitution

Recently it was discovered that, under elevated pressures, MoB 2 exhibits superconductivity at a critical temperature T c as high as 32 K. The superconductivity appears to develop following a pressure-induced structural transition from the ambient pressure $\text{R}\bar{3}$⁢m structure to an MgB 2 -like P6/mmm structure. This suggests that remarkably high T c values among diborides are not restricted to MgB 2 as previously appeared to be the case, and that similarly high T c values may occur in other diborides if they can be coerced into the MgB 2 structure. In this paper, we show that density functional theory calculations indicate that phonon free energy stabilizes the P6/mmm structure over the $\text{R}\bar{3}$⁢m at high temperatures across the Nb 1–x ⁢Mo x B 2 series. X-ray diffraction confirms that the synthesized Nb-substituted MoB 2 adopts the MgB 2 crystal structure. Finally, high magnetic field electrical resistivity measurements and specific heat measurements demonstrate that Nb x ⁢Mo 1–x⁢ B 2 exhibits superconductivity with T c as high as 8 K and critical fields approaching 6 T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

High-temperature phonon-mediated superconductivity in monolayer Mg 2 B 4 C 2

A two-dimensional material – Mg 2 B 4 C 2 , belonging to the family of the conventional superconductor MgB 2 , is theoretically predicted to exhibit superconductivity with critical temperature T c estimated in the 47–48 K range (predicted using the McMillian-Allen-Dynes formula) without any tuning of external parameters such as doping, strain, or substrate-induced effects. The origin of such a high intrinsic T c is ascribed to the presence of strong electron-phonon coupling and large density of states at the Fermi level. This system is obtained after replacing the chemically active boron-boron surface layers in a MgB 2 slab by chemically inactive boron-carbon layers. Hence, the surfaces of this material are inert. Our calculations confirm the stability of 2D Mg 2 B 4 C 2 . We also find that the key features of this material remain essentially unchanged when its thickness is increased by modestly increasing the number of inner MgB 2 layers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Spontaneous dynamical disordering of borophenes in MgB2 and related metal borides

Abstract Layered boron compounds have attracted significant interest in applications from energy storage to electronic materials to device applications, owing in part to a diversity of surface properties tied to specific arrangements of boron atoms. Here we report the energy landscape for surface atomic configurations of MgB 2 by combining first-principles calculations, global optimization, material synthesis and characterization. We demonstrate that contrary to previous assumptions, multiple disordered reconstructions are thermodynamically preferred and kinetically accessible within exposed B surfaces in MgB 2 and other layered metal diborides at low boron chemical potentials. Such a dynamic environment and intrinsic disordering of the B surface atoms present new opportunities to realize a diverse set of 2D boron structures. We validated the predicted surface disorder by characterizing exfoliated boron-terminated MgB 2 nanosheets. We further discuss application-relevant implications, with a particular view towards understanding the impact of boron surface heterogeneity on hydrogen storage performance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Single-photon detection using large-scale high-temperature MgB2 sensors at 20 K

Abstract Ultra-fast single-photon detectors with high current density and operating temperature can benefit space and ground applications, including quantum optical communication systems, lightweight cryogenics for space crafts, and medical use. Here we demonstrate magnesium diboride (MgB 2 ) thin-film superconducting microwires capable of single-photon detection at 1.55 μ m optical wavelength. We used helium ions to alter the properties of MgB 2 , resulting in microwire-based detectors exhibiting single-photon sensitivity across a broad temperature range of up to 20 K, and detection efficiency saturation for 1 μ m wide microwires at 3.7 K. Linearity of detection rate vs incident power was preserved up to at least 100 Mcps. Despite the large active area of up to 400 × 400 μ m 2 , the reset time was found to be as low as ~ 1 ns. Our research provides possibilities for breaking the operating temperature limit and maximum single-pixel count rate, expanding the detector area, and raises inquiries about the fundamental mechanisms of single-photon detection in high-critical-temperature superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Revealing symmetry-broken superconducting configurations by density functional theory

A coherent theory for the superconductivity of both conventional and unconventional superconductors is currently lacking. Here we show that superconductivity arises from the formation of a symmetry-broken superconducting configuration (SCC) due to atomic perturbation of the normal conducting configuration (NCC). This electron–phonon interaction creates straight one-dimensional tunnels (SODTs) for charge density of electrons and/or holes as revealed by the calculations based on density functional theory (DFT). The SODTs act as resistance-free superhighways and are correlated to the Cooper pairs in the Bardeen–Cooper–Schrieffer (BCS) theory. The formation of SODTs implies that the electron–phonon interaction in the BCS theory can be represented by the difference in charge densities between SCC and NCC predicted by DFT. The present work highlights that in conventional superconductors, SODTs are embedded within the bulk materials and are easily destroyed by phonon vibrations, resulting in a low critical superconducting temperature (T C ). Conversely, in unconventional superconductors such as YBa 2 Cu 3 O 7 (YBCO 7 ), SODTs are protected by a layered pontoon structure with very weak bonding to the bulk materials, maintaining SODTs’ stability at higher temperatures and leading to a much higher T C . The present approach is validated for 14 conventional superconductors of 18 pure elements and MgB 2 examined in this work, including the presently predicted superconductivity in Cu, Ag, Au, Sb, Bi, and MgB 2 at 0 K and 0 GPa, and one unconventional superconductor of YBCO 7 . Our discovery indicates that DFT can be a practical tool for predicting superconductors, enabling a systematic search for new superconducting materials in the future.

36 MATERIALS SCIENCE↗
NASA NTRS2003

Astro-E2 Magnesium Diboride High Current Leads

The recent discovery of superconducting properties in MgB_2 and rapid development of small diameter steel-clad wires has opened up the possibility of enhancing the design of the baseline Astro-E2 high current lead assembly. Replacing YBCO filaments with MgB_2 wires and modifying the heat sink location can give much higher margins against quench from temperature oscillations of the 4 K heat sink, although wih some overall thermal penalty. The design and performance of a new lead assembly during flight qualification is discussed, with emphasis on thermal, structural, and electrical test results.

Panek, J. S.↗
DOE OSTI2020

Superconducting magnesium diboride films for levitation of laser targets

Inertial confinement fusion targets would benefit from being levitated inside hohlraums to avoid capsule support-related implosion perturbations. Levitation inside a magnetic trap requires coating the capsule with a thin film that is superconducting at 20 K. Such non-epitaxial film growth on non-planar substrates is challenging. Here, we study Mg vapor annealing and solid-phase reactive inter-diffusion methods to form superconducting magnesium diboride (MgB 2 ) films on different planar and spherical carbon substrates, evaluating glassy carbon, polycrystalline diamond made by chemical vapor deposition, and carbon deposited by magnetron sputtering of graphite targets. Thin films of B and Mg are produced by magnetron sputtering onto stationary planar or rolling spherical substrates and annealed at either 600 or 850 °C in Mg vapor. The films are characterized by a combination of high-energy ion scattering, electron microscopy, and magnetometry. Results show that the critical superconducting temperature of resultant films depends on film microstructure and oxygen impurity content. The formation of MgB 2 films is also strongly substrate dependent, even in this case of non-epitaxial growth. Important factors to consider are oxygen outgassing of the substrate during thermal processing, substrate surface roughness, and the matching of thermal expansion coefficients of different layers in the multilayer structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Niobium substitution suppresses the superconducting critical temperature of pressurized MoB 2

A recent study has demonstrated that MoB 2 , transforming to the same structure as MgB 2 (P 6 /mmm), superconducts at temperatures above 30 K near 100 GPa [C. Pei et al., Natl. Sci. Rev. 10, nwad034 (2023)], and Nb substitution in MoB 2 stabilizes the P6/mmm structure down to ambient pressure [A. C. Hire et al., Phys. Rev. B 106, 174515 (2022)]. Here, the current work explores the high-pressure superconducting behavior of Nb-substituted MoB 2 (Nb 0.25 Mo 0.75 B 2 ). High-pressure x-ray diffraction measurements show that the sample remains in the ambient pressure P6/mmm structure to at least 160 GPa. Electrical resistivity measurements demonstrate that from an ambient pressure T c of 8K (confirmed by specific heat to be a bulk effect), the critical temperature is suppressed to 4 K at 50 GPa, before gradually rising to 5.5 K at 170 GPa. The critical temperature at high pressure is thus significantly lower than that found in MoB 2 under pressure (30 K), revealing that Nb substitution results in a strong suppression of the superconducting critical temperature. Our calculations indeed find a reduced electron-phonon coupling in Nb 0.25 Mo 0.75 B 2 , but do not account fully for the observed suppression, which may also arise from inhomogeneity and enhanced spin fluctuations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Type-II Dirac cones and electron-phonon interaction in monolayer biphenylene from first-principles calculations

In this work, we report a first-principles investigation of electronic structure, topological bands, and electron-phonon interactions in metallic biphenylene sheets. Biphenylene is a recently synthesized sp 2 -bonded carbon allotrope. We find coupling of electrons at the Fermi surface to very high frequency carbon-derived phonons, analogous to superconducting MgB 2 . This leads to low-temperature weak coupling superconductivity due to an unusual combination of exceptionally large logarithmically averaged phonon frequency ω log =1369 K and moderate electron-phonon coupling. The electronic structure shows a two-band Fermi surface dominated by C p z orbitals and a pair of type-II tilted Dirac cones along the Γ-Y line at the Brillouin zone boundary. Berry curvature and edge-state calculations show that monolayer biphenylene is a two-dimensional $\mathbb{Z}$ 2 topological material. Thus, monolayer biphenylene is predicted to be a topological superconductor based on C p orbitals and high-frequency phonons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Can High Current Density HTS Magnets be Quench Protected Using Methods Used to Protect High Current Density LTS Magnets?

In the 1970s the Lawrence Berkeley Laboratory (LBL) was testing high current density magnets where the EJ 2 limit was up to two orders of magnitude higher than the quench protection methods of the period would permit at the time. LBL was designing a high current density (J) thin solenoid with a large volume and stored energy (E). The accepted EJ 2 limit at the time was ~10 23 J A 2 m -4 . In order to exceed the EJ 2 limit by two orders of magnitude, one had to greatly increase the quench protection voltages (V) and magnet current (I). In 1977, LBL tested four quench protection methods on a 2-meter diameter high current density solenoid with a stored energy of 2 MJ. Three of these quench protection methods worked well, but the fourth didn't appear to work. These methods will be discussed as to whether they can be applied to HTS or MgB 2 high current density magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

A foundation model for non-destructive defect identification from vibrational spectra

Defects are ubiquitous in solids and strongly influence materials’ functional properties. However, non-destructive characterization and quantification of defects, especially when multiple types coexist, remain a long-standing challenge. Here, we introduce DefectNet, a foundation machine learning model that predicts the chemical identity and concentration of substitutional point defects with multiple coexisting elements directly from vibrational spectra, specifically phonon density-of-states (PDoS). Trained on over 16,000 simulated spectra from 2,000 semiconductors, DefectNet employs a tailored attention mechanism to identify up to six distinct defect elements at concentrations ranging from 0.2% to 25%. The model generalizes well to unseen crystals across 56 elements and can be fine-tuned on experimental data. Validation using inelastic scattering measurements of SiGe alloys and MgB 2 superconductor demonstrates its accuracy and transferability. Furthermore, our work establishes vibrational spectroscopy as a viable, non-destructive probe for bulk point defect quantification, and highlights the promise of foundation models in data-driven defect engineering.

artificial intelligence↗
DOE OSTI2022

Creating superconductivity in WB 2 through pressure-induced metastable planar defects

High-pressure electrical resistivity measurements reveal that the mechanical deformation of ultra-hard WB 2 during compression induces superconductivity above 50 GPa with a maximum superconducting critical temperature, T c of 17 K at 91 GPa. Upon further compression up to 187 GPa, the T c gradually decreases. Theoretical calculations show that electron-phonon mediated superconductivity originates from the formation of metastable stacking faults and twin boundaries that exhibit a local structure resembling MgB 2 (hP3, space group 191, prototype AlB 2 ). Synchrotron x-ray diffraction measurements up to 145 GPa show that the ambient pressure hP12 structure (space group 194, prototype WB 2 ) continues to persist to this pressure, consistent with the formation of the planar defects above 50 GPa. The abrupt appearance of superconductivity under pressure does not coincide with a structural transition but instead with the formation and percolation of mechanically-induced stacking faults and twin boundaries. The results identify an alternate route for designing superconducting materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Design Study of a Superconducting Quadrupole Magnet System Sustainable Under Dark Current Heating in ILC Main Linac

The International Linear Collider (ILC) main linac comprises a series of 12 m-long cryomodules. The cryomodule contains eight 9-cell superconducting (SC) RF (SRF) cavities and an SC quadrupole magnet combined with dipole correctors to focus and steer electron and positron beams. The magnets are installed between the SRF cavity string and at the longitudinal center of a common cryomodule/cryostat. These magnets are conductively cooled by pure aluminum channels thermally connected to a 2 K two-phase helium pipe for cooling the SRF cavities. A recent study shows that field-emitted electrons, so-called “dark current” initiated in the SRF cavities, are transmitted through the SRF cavity string and reach the SC magnet. The energy is inevitably absorbed in the SC coil due to the magnetic field, resulting in risks of a quench caused by the coil heating. We are investigating alternate magnet designs by using Nb $_{3}$ Sn or $\text{MgB}_{2}$ SC and by adding the dark current absorber surrounding the beam-pipe to realize sustainable magnet operation under the dark current heating. We report the design study of the magnet system and interfaces to the cryomodule accommodating it with the SRF cavities.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

High-Throughput Screening of Strong Electron–Phonon Couplings in Ternary Metal Diborides

Here, we perform a high-throughput screening on phonon-mediated superconductivity in a ternary metal diboride structure with alkali, alkaline earth, and transition metals. We find 17 ground states and 78 low-energy metastable phases. From fast calculations of zone-center electron–phonon coupling, 43 compounds are revealed to show electron–phonon coupling strength higher than that of MgB 2 . An anticorrelation between the energetic stability and electron–phonon coupling strength is identified. We suggest two phases, i.e., Li 3 ZrB 8 and Ca 3 YB 8 , to be synthesized, which show reasonable energetic stability and superconducting critical temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Leggett modes in a Dirac semimetal

Abstract Experiments have shown that several materials, including MgB 2 , iron-based superconductors and monolayer NbSe 2 , are multiband superconductors. Superconducting pairing in multiple bands can give rise to phenomena not available in a single band, including Leggett modes. A Leggett mode is the collective periodic oscillation of the relative phase between the phases of the superconducting condensates formed in the different bands. The experimental observation of Leggett modes is challenging because multiband superconductors are rare and because these modes describe charge fluctuations between bands and therefore are hard to probe directly. Also, the excitation energy of a Leggett mode is often larger than the superconducting gaps, and therefore they are strongly overdamped via relaxation processes into the quasiparticle continuum. Here, we show that Leggett modes and their frequency can be detected in a.c. driven superconducting quantum interference devices. We then use the results to analyse the measurements of such a quantum device, one based on a Dirac semimetal Cd 3 As 2 , in which superconductivity is induced by proximity to superconducting Al. These results show the theoretically predicted signatures of Leggett modes, and therefore we conclude that a Leggett mode is present in the two-band superconducting state of Cd 3 As 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Chemical bonding dictates drastic critical temperature difference in two seemingly identical superconductors

Though YB 6 and LaB 6 share the same crystal structure, atomic valence electron configuration, and phonon modes, they exhibit drastically different phonon-mediated superconductivity. YB 6 superconducts below 8.4 K, giving it the second-highest critical temperature of known borides, second only to MgB 2 . LaB 6 does not superconduct until near-absolute zero temperatures (below 0.45 K), however. Though previous studies have quantified the canonical superconductivity descriptors of YB 6 ’s greater Fermi-level (E f ) density of states and higher electron–phonon coupling (EPC), the root of this difference has not been assessed with full detail of the electronic structure. Through chemical bonding, we determine low-lying, unoccupied 4f atomic orbitals in lanthanum to be the key difference between these superconductors. These orbitals, which are not accessible in YB 6 , hybridize with π B–B bonds and bring this π-system lower in energy than the σ B–B bonds otherwise at E f . This inversion of bands is crucial: the optical phonon modes we show responsible for superconductivity cause the σ-orbitals of YB 6 to change drastically in overlap, but couple weakly to the π-orbitals of LaB 6 . These phonons in YB 6 even access a crossing of electronic states, indicating strong EPC. No such crossing in LaB 6 is observed. Finally, a supercell (the M k-point) is shown to undergo Peierls-like effects in YB 6 , introducing additional EPC from both softened acoustic phonons and the same electron-coupled optical modes as in the unit cell. Overall, we find that LaB 6 and YB 6 have fundamentally different mechanisms of superconductivity, despite their otherwise near-identity.

Science & Technology - Other Topics↗
DOE OSTI2023

Activated vortex lattice transition in a superconductor with combined sixfold and twelvefold anisotropic interactions

Abstract Numerical simulations are used to examine the transition dynamics between metastable and ground state vortex lattice phases in a system with combined sixfold and twelvefold contributions to the vortex–vortex interactions. The system is initially annealed using a twelvefold anisotropy, yielding domains of two different orientations and separated by grain boundaries. The vortex–vortex interaction is then suddenly changed to a sixfold anisotropy, rendering the twelvefold state metastable. Applying a drive that mimics an oscillating magnetic field causes the metastable state to decay, indicated by the structure factor that evolves from twelve to six peaks. The results fit the behavior seen in recent small-angle neutron scattering studies of the vortex lattice in MgB 2 . At higher drive amplitudes, the decay exhibits a two step process in which the initial fast decrease is followed by a slower regime where avalanches or bursts are correlated with dislocation annihilation events. The results are compared to other types of metastable systems with quenched disorder that decay under a periodic external drive.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Temperature dependence of London penetration depth anisotropy in superconductors with anisotropic order parameters

Here, we study the effects of anisotropic order parameters on the temperature dependence of London penetration depth anisotropy γ λ ( T ) . After MgB 2 , this dependence is commonly attributed to distinct gaps on multiband Fermi surfaces in superconductors. We have found, however, that the anisotropy parameter may depend on temperature also in one-band materials with anisotropic order parameters Δ ( T , k F ) ; a few such examples are given. We have also found that for different order parameters, the temperature dependence of Δ ( T ) / Δ ( 0 ) can be represented with good accuracy by the interpolation suggested by Einzel, which simplifies considerably the evaluation of γ λ ( T ) . Of particular interest are mixed order parameters of two symmetries for which γ λ ( T ) may go through a maximum for a certain relative weight of two phases. Also, for this case we find that the ratio Δ max ( 0 ) / T c may exceed substantially the weak-coupling limit of 1.76. It, however, does not imply strong coupling; rather, it is due to significantly anisotropic angular variation of Δ .

36 MATERIALS SCIENCE↗