Search NASA⌕ Search

SEARCH · Search NASA

Results for “MnO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Materials Data on MnO2 by Materials Project

MnO2 is beta Vanadium nitride-like structured and crystallizes in the monoclinic P2/m space group. The structure is three-dimensional. there are four inequivalent Mn4+ sites. In the first Mn4+ site, Mn4+ is bonded to six O2- atoms to form edge-sharing MnO6 octahedra. There is two shorter (1.93 Å) and four longer (1.94 Å) Mn–O bond length. In the second Mn4+ site, Mn4+ is bonded to six O2- atoms to form a mixture of corner and edge-sharing MnO6 octahedra. The corner-sharing octahedra tilt angles range from 50–51°. There are a spread of Mn–O bond distances ranging from 1.91–1.95 Å. In the third Mn4+ site, Mn4+ is bonded to six O2- atoms to form edge-sharing MnO6 octahedra. There is two shorter (1.93 Å) and four longer (1.94 Å) Mn–O bond length. In the fourth Mn4+ site, Mn4+ is bonded to six O2- atoms to form a mixture of corner and edge-sharing MnO6 octahedra. The corner-sharing octahedra tilt angles range from 50–51°. There are a spread of Mn–O bond distances ranging from 1.91–1.95 Å. There are six inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted trigonal planar geometry to three Mn4+ atoms. In the second O2- site, O2- is bonded in a 3-coordinate geometry to three Mn4+ atoms. In the third O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to three Mn4+ atoms. In the fourth O2- site, O2- is bonded in a distorted trigonal planar geometry to three Mn4+ atoms. In the fifth O2- site, O2- is bonded in a 3-coordinate geometry to three Mn4+ atoms. In the sixth O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to three Mn4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on MnO2 by Materials Project

MnO2 crystallizes in the tetragonal P4/mmm space group. The structure is three-dimensional. Mn4+ is bonded to six O2- atoms to form a mixture of edge and corner-sharing MnO6 octahedra. The corner-sharing octahedral tilt angles are 0°. There is two shorter (1.85 Å) and four longer (2.07 Å) Mn–O bond length. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a linear geometry to two equivalent Mn4+ atoms. In the second O2- site, O2- is bonded in a square co-planar geometry to four equivalent Mn4+ atoms.

36 MATERIALS SCIENCE↗

Inhomogeneous structural evolution of silver-containing Alpha-MnO2 nanorods in sodium-ion batteries investigated by comparative transmission electron microscopy approach

Alpha-MnO 2 is an attractive cathode candidate for sodium-ion batteries attributed to its unique one-dimensional 2×2 tunnels for facile sodium-ion diffusion, in addition to its incomparable cost advantage. In particular, α-MnO2 shows superior rate capability with silver stabilizing ions at the center of tunnels that improve electrical conductivity. In this work, we directly compare structural transformation of silver-containing α-MnO 2 nanorods (Ag 1.22 Mn 8 O 16-x or L-Ag-HOL and Ag 1.66 Mn 8 O 16-y or H–Ag-HOL), containing higher and lower concentrations of oxygen vacancies respectively, by transmission electron microscopy (TEM). The elaborate comparative and statistical TEM studies eliminate concerns regarding generalization errors and facilitate rational structural development of nanorods with improved functionality. It is found that sodium ions favorably diffuse through the area where oxygen vacancies are concentrated, and the samples with more silver ions and fewer oxygen vacancies (H–Ag-HOL) show more significant structural deformation with more inhomogeneous sodiation. The difference in functional electrochemistry coupled with the observed difference in inter- and intra-nanorod inhomogeneous structural evolution emphasizes the significance of the uniform electrical conductivity of the electrode. This work helps to improve the α-MnO 2 electrode material for sodium-ion batteries as well as suggesting the importance of delicate statistical approaches for TEM investigations.

25 ENERGY STORAGE↗

Direct Conversion of MnO2 into Atomic Mn Sites for Oxygen Reduction

Development of platinum group metal (PGM)-free catalysts has been investigated to replace the platinum group metal catalyst in future inexpensive polymer electrolyte membrane (PEM) fuel cells. Usually, synthetic methods for these PGM-free catalysts involve introducing transition-metal salts or molecules. Herein, we demonstrate a facile synthetic method to prepare PGM-free Mn-N-C catalysts by directly converting manganese oxides into highly active MnN4 sites. Typically, MnO2 is used as a Mn source. Ammonium chloride and benzimidazole are introduced during high-temperature treatment to enhance catalytic activity and stability further. Ammonia generated from the decomposition of ammonium chloride can improve the intrinsic ORR activity of MnNx moieties through chemical or electronic effects by introducing additional nitrogen groups. The Mn-N-C catalyst exhibits promising ORR activity, achieving a half-wave potential of 0.83 V in 0.5 M H2SO4, outperforming most PGM-free ORR catalysts. The robust carbon structure resulting from organic-molecule treatment is also verified by electrochemical and physical characterization, thereby improving the catalyst's durability.

Yang, Xiaoxuan↗

A new concept for high-cycle-life LEO: Rechargeable MnO2-hydrogen

The nickel-hydrogen secondary battery system, developed in the early 1970s, has become the system of choice for geostationary earth orbit (GEO) applications. However, for low earth orbit (LEO) satellites with long expected lifetimes the nickel positive limits performance. This requires derating of the cell to achieve very long cycle life. A new system, rechargeable MnO2-Hydrogen, which does not require derating, is described here. For LEO applications, it promises to have longer cycle life, high rate capability, a higher effective energy density, and much lower self-discharge behavior than those of the nickel-hydrogen system.

Appleby, A. J.↗

Nanostructured MnO2-Based Cathodes for Li-Ion/Polymer Cells

Nanostructured MnO2-based cathodes for Li-ion/polymer electrochemical cells have been investigated in a continuing effort to develop safe, high-energy-density, reliable, low-toxicity, rechargeable batteries for a variety of applications in NASA programs and in mass-produced commercial electronic equipment. Whereas the energy densities of state-of-the-art lithium-ion/polymer batteries range from 150 to 175 W h/kg, the goal of this effort is to increase the typical energy density to about 250 W h/kg. It is also expected that an incidental benefit of this effort will be increases in power densities because the distances over which Li ions must diffuse through nanostructured cathode materials are smaller than those through solid bulk cathode materials.

Skandan, Ganesh↗

Reliability Issues with Polymer and MnO2 Tantalum Capacitors for Space Applications

This work gives a comparative analysis of degradation processes, failure modes and mechanisms in MnO2 and polymer technology capacitors. Analyzed conditions include effects of vacuum and radiation, soldering (pop-corning), long-term storage and operation at high temperatures, stability at low and high temperatures, and anomalous transients. Screening and qualification procedures to assure space-grade quality of CPTCs are suggested.

tantalum capacitors↗

Reliability Issues with Polymer and MnO2 Tantalum Capacitors for Space Applications

This presentation gives a comparative analysis of degradation processes, failure modes and mechanisms in MnO2 and polymer technology capacitors. Analyzed conditions include effects of vacuum and radiation, soldering (pop-corning), long-term storage, operation at high temperatures, stability at low and high temperatures, and anomalous transients. Screening and qualification procedures to assure space-grade quality of CPTCs are suggested.

capacitor↗

Infant Mortality and Wear-Out Failures in Polymer and MnO2 Tantalum Capacitors

Reliability testing of modern tantalum capacitors shows the presence of both types, infant mortality (IM) and wearout (WO) failures. To assure reliable operation, the probability of IM failures should be reduced to below the specified level, and the time of WO inception should be greater than the required useful life of the parts at operation conditions. In this work, several types of MnO2 and polymer cathode tantalum capacitors have been tested at highly accelerated conditions to assess voltage acceleration factors, determine adequate burn-in conditions, and assess the useful life. A modified time dependent dielectric breakdown (TDDB) model has been suggested to explain both types of failure, and a physical mechanism of degradation that is based on migration and reactions of oxygen vacancies explains increase of the defect related, IM failures with the level of stress.

tantalum capacitors↗

Materials Data on MnO2 by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on MnO2 by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on MnO2 by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on MnO2 by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on MnO2 by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on MnO2 by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on MnO2 by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗