Search NASA⌕ Search

SEARCH · Search NASA

Results for “MnS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Manganese sulfide formation via concomitant microbial manganese oxide and thiosulfate reduction.

The dissimilatory metal-reducing bacterium, Shewanella oneidensis MR-1 produced γ-MnS (rambergite) nanoparticles under the concurrent reduction of synthetic MnO 2 and thiosulfate coupled to H 2 oxidation. Using two MR-1 mutants defective in outer membrane c-type cytochromes (ΔmtrC/ΔomcA and ΔmtrC/ΔomcA/ΔmtrF) to eliminate the direct reduction pathway for solid electron acceptors, it was determined that respiratory reduction of MnO 2 was dominant relative to chemical reduction by biogenic sulfide generated from bacterial thiosulfate reduction. Although bicarbonate was excluded from the medium, incubations of MR-1 using lactate as the sole electron donor produced MnCO 3 (rhodochrosite) as well as MnS in nearly equivalent amounts as estimated by micro X-ray diffraction (micro-XRD) analysis. It was concluded that carbonate released from lactate metabolism promoted MnCO 3 formation and that Mn(II) mineralogy was strongly affected by carbonate ions even in the presence of abundant sulfide and weakly alkaline conditions that favor the precipitation of MnS. Formation of the biogenic MnS, as determined by a combination of micro-XRD, transmission electron microscopy, energy dispersive X-ray spectroscopy, and selected area electron diffraction analyses was consistent with equilibrium speciation modeling predictions. Although biogenic MnS likely only forms and is stable over a relatively narrow range of conditions, it may be a significant sink for Mn in anoxic marine basins and terrestrial subsurface sediments where Mn and sulfur compounds are undergoing concurrent reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

IR Spectroscopic Study of Interatomic Interaction in [(CoFeB){sub 60}C{sub 40}/SiO{sub 2}]{sub 200} and [(CoFeB){sub 34}(SiO{sub 2}){sub 66}/C]{sub 46} Multilayer Nanostructures with Metal-Containing Composite Layers

This paper presents an IR spectroscopic study of chemical bonds between components of amorphous [(CoFeB){sub 60}C{sub 40}/SiO{sub 2}]{sub 200} and [(CoFeB){sub 34}(SiO{sub 2}){sub 66}/C]{sub 46} multilayer nanostructures (MNS’s) made up of metal-containing composite layers and different interlayers, which influence their electromagnetic properties. Our results demonstrate that, even though the MNS’s have identical elemental compositions, their IR spectra differ significantly. The reason for this is that the main contribution to the IR spectrum of the [(CoFeB){sub 60}C{sub 40}/SiO{sub 2}]{sub 200} MNS is made by its SiO{sub 2} interlayers. The formation of other bonds with oxygen and silicon is blocked by the carbon present in the (CoFeB){sub 60}C{sub 40} composite layers, as evidenced by the presence of the strongest mode in the IR spectra of this structure, which corresponds to boron carbide, BC. The considerable intensity redistribution to the low-frequency region in the IR spectrum of the [(CoFeB){sub 34}(SiO{sub 2}){sub 66}/C]{sub 46} MNS, containing carbon interlayers, is due to the incorporation of nominal SiO2 into the metal-containing composite layers and the partial redistribution of oxygen bonds from the SiO{sub 2} to the 3d transition metals, resulting in the formation of metal oxides and a silicon suboxide. The interaction of the carbon present in the interlayers between the composite layers with elements of the composite layers, in particular with boron, is considerably weaker in comparison with the other MNS, [(CoFeB){sub 60}C{sub 40}/SiO{sub 2}]{sub 200}, which has oxide interlayers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Molecular Hypernetworks for Exploration of Multi-Dimensional Metabolomics Data (Chyper)

Orthogonal separations of data from high-resolution mass spectrometry can provide insight into sample composition and help address the challenge of complete annotation of molecules in untargeted metabolomics. “Molecular networks” (MNs), as used, for example, in the Global Natural Products Social Molecular Networking platform, are an increasingly popular computational strategy for exploring and visualizing molecular relationships and improving annotation. MNs use graph representations to show the relationships between measured multidimensional data features. MNs also show promise for using network science algorithms to automatically identify targets for annotation candidates and to dereplicate features associated to a single molecular identity. However, more advanced methods may better represent the complexity present in samples. Our work aims to increase confidence in annotation propagation by extending molecular network methods to include “molecular hypernetworks” (MHNs), able to natively represent multiway relationships among observations supporting both human and analytical processing. In this paper we first introduce MHNs illustrated with simple examples, and demonstrate how to build them from liquid chromatography- and ion mobility spectrometry- separated MS data. We then describe a method to construct MHNs directly from existing MNs as their “clique reconstructions”, demonstrating their utility by comparing examples of previously published graph-based MNs to their respective MHNs.

59 BASIC BIOLOGICAL SCIENCES↗

Development of Stretch Flangeable Grade Steels by Inclusion Engineering Approach

The demand for good stretch flangeability in high-strength automotive steels has necessitated due attention on steel cleanliness and processes. The presence of elongated MnS stringers and centerline segregation of nonmetallic inclusions adversely affects the transverse mechanical property. In the present investigation, stretch flangeability of industrially produced steel, with and without Ca treatment, has been compared with Ti-added steel, produced at 40 kg scale without Ca treatment. The study brings out the influence of centerline segregation and modification of nonmetallic inclusions on HER performance. The microstructural analysis of industrial steel revealed that the method of hole formation (punching/drilling) determines crack initiation mechanism. The inclusions, along with the second phase present in the centerline, drive the crack propagation. An addition of Ti in liquid steel promotes formation of Al-Ti-O-based oxide, prior to MnS precipitation, during solidification and acts as nucleation site for MnS inclusion. This obviates the elongated stringer-type MnS inclusions. The centerline segregation-free Ti-modified steel, prepared at the laboratory scale, showed consistent HER property compared with industrial steel. It is also concluded that calcium treatment can be circumvented by modifying the sulfide stringer with the addition of Ti in the steel for further improvement in HER property.

36 MATERIALS SCIENCE↗

Atomic-scale decoration for improving the pitting corrosion resistance of austenitic stainless steels

Stainless steels are susceptible to the localized pitting corrosion that leads to a huge loss to our society. Studies in the past decades confirmed that the pitting events generally originate from the local dissolution in MnS inclusions which are more or less ubiquitous in stainless steels. Although a recent study indicated that endogenous MnCr 2 O 4 nano-octahedra within the MnS medium give rise to local nano-galvanic cells which are responsible for the preferential dissolution of MnS, effective solutions of restraining the cells from viewpoint of electrochemistry are being tantalizingly searched. Here we report such a galvanic corrosion can be greatly resisted via bathing the steels in Cu 2+ -containing solutions. This chemical bath generates Cu 2–δ S layers on the surfaces of MnS inclusions, invalidating the nano-galvanic cells. Our study provides a low-cost approach via an atomic scale decoration to improve the pitting corrosion resistance of stainless steels in a volume-treated manner.

36 MATERIALS SCIENCE↗

Synapse-specific catecholaminergic modulation of neuronal glutamate release

Norepinephrine in vertebrates and its invertebrate analog, octopamine, regulate the activity of neural circuits. We find that, when hungry,Drosophilalarvae switch activity in type II octopaminergic motor neurons (MNs) to high-frequency bursts, which coincide with locomotion-driving bursts in type I glutamatergic MNs that converge on the same muscles. Optical quantal analysis across hundreds of synapses simultaneously reveals that octopamine potentiates glutamate release by tonic type Ib MNs, but not phasic type Is MNs, and occurs via the G q -coupled octopamine receptor (OAMB). OAMB is more abundant in type Ib terminals and acts through diacylglycerol and its target Unc13A, a key component of the glutamate release machinery. Potentiation varies significantly—by up to 1,000%—across synapses of a single Ib axon, with synaptic Unc13A levels determining both release probability and potentiation. We propose that a dual molecular mechanism—an upstream neuromodulator receptor and a downstream transmitter release controller—fine-tunes catecholaminergic modulation so that strong tonic synapses exhibit large potentiation, while weaker tonic and all phasic synapses maintain consistency, yielding a sophisticated regulation of locomotor behavior.

Science & Technology - Other Topics↗

Wurtzite materials in alloys of rock salt compounds

Materials with crystal structures containing tetrahedral motifs are preferable for optoelectronic applications because they often have direct band gaps and low electron effective masses. However, crystal structures of manganese chalcogenides typically contain octahedral motifs, such as in rocksalt (RS) MnS and MnSe materials. Here we experimentally show that MnS 1-x Se x alloys with tetrahedrally-bonded wurtzite (WZ) structure can form between MnSe and MnS parent compounds with octahedral RS structures, at S-rich compositions (x<0.4) and low synthesis temperatures (~300°C). The calculated mixing enthalpies of MnS1-xSex alloys in RS and WZ structures cannot explain this experimental observation, so we hypothesize that WZ stabilization may be related to smaller structure density and lower surface energy compared to RS. The resulting WZ MnS 1-x Se x alloys have 3.0-3.2 eV optical absorption onset and lower electrical conductivity (<0.0001 S/cm) compared to the parent RS compounds. These experimental measurement result are consistent with computationally predicted band gaps and effective masses.

36 MATERIALS SCIENCE↗

Duplex Heterogeneous Nucleation Behavior of Precipitates in C-Mn Steel Containing Sn

The two successive heterogeneous nucleation behaviors of FeSn{sub 2}-MnS-Al{sub 2}O{sub 3} complex precipitates in ultrahigh Sn-bearing steel were investigated. First, Al{sub 2}O{sub 3} was the nucleation site of the MnS at the end of solidification. Then, FeSn{sub 2} nucleated heterogeneously on the MnS particles that nucleated on the Al{sub 2}O{sub 3} particles. The formation sequence of the precipitated phase caused the duplex heterogeneous nucleation to occur consecutively at most twice.

36 MATERIALS SCIENCE↗

Prominent Study on Surface Properties and Diffusion Coefficient of Urease-Conjugated Magnetite Nanoparticles

Herein, the magnetite nanoparticles (MNs) were prepared by facile solvothermal method and its porous nature was modified using 3-(2-aminoethyl)-3-aminopropyl trimethoxysilane (AEAPS). Magnetite formation, successful amino tagging, and urease conjugation on the surface were confirmed from the presence of certain functional groups in Fourier transform infrared (FT-IR) spectra. Also, nanosize (13.2 nm) and spherical morphology of MNs were evaluated from diffraction patterns and electron micrographs respectively. Lower retentivity and coercivities in magnetization curve revealed the superparamagnetic behavior, and nitrogen adsorption/desorption curves exhibited decrease in its surface porosity. Conductivity measurements showed lower diffusion coefficient (D{sub e} = 1.9 × 10{sup −17} cm{sup 2}/min) and higher diffusion with limited hydrolytic reaction in native urease and improved activity of conjugated urease with higher D{sub e} (12.62 × 10{sup −16} cm{sup 2}/min). Hence, this study revealed that the surface porous nature of MNs can be altered effectively by amino tagging in order to overcome diffusional limitations thereby enhancing enzyme activity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure refinement and mechanical properties improvement by developing IAF on inclusions in Ti–Al complex deoxidized HSLA steel

The present study focused on microstructure refinement in Ti–Al complex deoxidized low alloy structural steel by developing IAF on inclusions. The goal was to establish more determined relation between Ti, Al in steel and the produced microstructures. In steel sample with Ti and Al contents of 0.0035% and 0.0004%, respectively, IAF was well developed by inclusions characterized by TiO{sub x}–MnO oxide cores enwrapped by (MnO–SiO{sub 2}–Al{sub 2}O{sub 3})–MnS or (MnO–SiO{sub 2})–MnS surface layers. With the rise of Ti and Al contents, IAF volume decreased greatly because of different inclusion chemistry, TiO{sub x} + MnS, TiO{sub x}–Al{sub 2}O{sub 3} or Al{sub 2}O{sub 3}, which inhibit the formation of IAF. Thermodynamic calculations were carried out for optimal Ti and Al contents in steel to target inclusions with proper chemistry for nucleating IAF. These laboratorial findings were successfully applied and reproducibly observed in pilot trials. It was indicated that low temperature impact toughness at 0 °C and − 20 °C of the produced medium plate was effectively improved despite lower Ti contents than common process, which was very meaningful in saving the cost of high Ti content steels. - Highlights: • IAF volume showed close relationship to Ti or Al contents. • To target IAF, there is no need to add too many titanium alloys. • Optimal Ti and Al were about 0.0020–0.0060% and 0.0005–0.0020%, respectively. • Impact toughness of steel plate at 0 °C and − 20 °C was successfully improved.

36 MATERIALS SCIENCE↗

Deficiency in transmitter release triggers homeostatic transcriptional changes that increase presynaptic excitability

Weakening of synaptic transmission at theDrosophilalarval neuromuscular junction triggers two forms of homeostatic compensation, one that increases the probability of glutamate release per action potential (P r ) and another that increases motoneuron (MN) activity. We investigated the molecular changes in MNs that underlie the increase in MN activity. RNA sequencing (RNA-seq) analysis on MNs whose glutamate release is weakened by knockdown of components of the MN transmitter release machinery reveals a reduction in expression of a group of genes that encode potassium channels and their positive modulators. These results identify a mechanism of compensation for weakened synaptic transmission by MNs, which engages a transcriptional program in those cells to increase firing and, thereby, ensure sufficient locomotory drive.

Science & Technology - Other Topics↗

Materials Data on MnSN2O4F3 by Materials Project

(MnS(OF)3)2N2(NO)2 crystallizes in the monoclinic P2_1/c space group. The structure is one-dimensional and consists of four ammonia molecules; four nitroxyl molecules; and two MnS(OF)3 ribbons oriented in the (1, 0, 0) direction. In each MnS(OF)3 ribbon, there are two inequivalent Mn3+ sites. In the first Mn3+ site, Mn3+ is bonded to two equivalent O2- and four F1- atoms to form corner-sharing MnO2F4 octahedra. The corner-sharing octahedral tilt angles are 42°. Both Mn–O bond lengths are 2.30 Å. There is two shorter (1.82 Å) and two longer (1.96 Å) Mn–F bond length. In the second Mn3+ site, Mn3+ is bonded to two equivalent O2- and four F1- atoms to form distorted corner-sharing MnO2F4 octahedra. The corner-sharing octahedral tilt angles are 42°. Both Mn–O bond lengths are 2.32 Å. There is two shorter (1.83 Å) and two longer (1.94 Å) Mn–F bond length. S2- is bonded in a distorted trigonal planar geometry to three O2- atoms. There is one shorter (1.44 Å) and two longer (1.46 Å) S–O bond length. There are three inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Mn3+ and one S2- atom. In the second O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Mn3+ and one S2- atom. In the third O2- site, O2- is bonded in a single-bond geometry to one S2- atom. There are three inequivalent F1- sites. In the first F1- site, F1- is bonded in a single-bond geometry to one Mn3+ atom. In the second F1- site, F1- is bonded in a distorted bent 150 degrees geometry to two Mn3+ atoms. In the third F1- site, F1- is bonded in a single-bond geometry to one Mn3+ atom.

36 MATERIALS SCIENCE↗

Characterisation of nano-scale precipitates in BOR60 irradiated T91 steel using atom probe tomography

Atom probe tomography has characterised the microstructural changes in T91 steel after BOR60 reactor irradiation at five temperatures between 376 °C and 524 °C to doses between 14.6 dpa and 35.1 dpa. Irradiation-induced precipitation and segregation to carbide/matrix interface induced by neutron irradiation has been characterised. Atom probe tomography characterisation shows that Mn, Ni, Si -rich (MNS-rich) clusters form in T91 steel irradiated in BOR60 reactor at temperatures between 376 °C and 415 °C, which is not observed at higher temperatures 460 °C and 524 °C. Additionally, the number density, volume fraction and composition of MNS-rich clusters have been characterised. Ni, Mn, Si and P is found to segregate at carbide matrix interface after irradiation at lower temperature and only P segregation is observed at 524 °C.

36 MATERIALS SCIENCE↗

An Integrated Study on the Evolution of Inclusions in EH36 Shipbuilding Steel with Mg Addition: From Casting to Welding

Inclusion evolution behaviors, in terms of composition, size, and number density, and associated influence on the microstructures of the as-cast slabs, rolled plates, and simulated welded samples of plain EH36 and EH36-Mg shipbuilding steels have been systematically investigated. The results indicate that the inclusions in the as-cast plain EH36 are almost Al-Ca-S-O-(Mn) complex oxides with sizes ranging from 1.0 to 2.0 μm. After Mg addition, a large amount of individually fine MnS precipitates and Mg-containing Ti-Al-Mg-O-(Mn-S) complex inclusions are generated, which significantly refine the microstructure and are conducive to the nucleation of acicular ferrite in the rolled and welded sample. Moreover, after rolling and welding thermal simulation, the number of individual MnS decreases gradually due to its precipitation on the surface of Ti-Al-Mg-O oxides.

36 MATERIALS SCIENCE↗

Formation of Plastic Inclusions in U71Mnk High-Speed Heavy-Rail Steel Refined by CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO Slag

To precisely control the characteristics of nonmetallic inclusions with high plasticity in U71Mnk high-speed heavy-rail steel deoxidized by Si and Mn, the chemical composition of CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO slag in the ladle furnace (LF) refining process was optimized by thermodynamic calculations. Relationships among the refining slag, nonmetallic inclusions, and elemental concentrations in the steels were analyzed to obtain the conditions for determining the optimal composition of refining slag. The optimal compositions and the component activities of CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO refining slag were determined and discussed according to calculations using FactSage 7.0. Finally, ten industrial experiments were performed. Variations in the compositions of LF refining slag, inclusions, and steel, as well as the sizes of the inclusions, and metallographic classification assessment of the U71Mnk steel product, were investigated and discussed to verify the feasibility and effectiveness of the optimized LF refining slag. Kinetics of steel–slag and steel-inclusion reactions during LF refining was studied and compared. The results show that to obtain low [O], [Al], and [S] contents and inclusions with high plasticity in molten steel, the optimal composition of the LF refining slag should be CaO: 44.2 to 51.7 wt pct, SiO{sub 2}: 41.4 to 47.0 wt pct, Al{sub 2}O{sub 3}: 0 to 4.7 wt pct and MgO 5.0 to 7.0 wt pct, where the basicity R is above 1.00 and the C/A ratio is above 9.00. After the LF refining process, the contents of total oxygen (T.O.), [Al], and [S] gradually stabilized in the range of 0.0008 to 0.0012 wt pct, 0.002 to 0.0028 wt pct and 0.0026 to 0.0037 wt pct, respectively. The densities of the three kinds of typical inclusions (CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO, MnS, and CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO-MnS) also decreased and reached approximately 0.25/mm{sup 2}, and no inclusion larger than 6.0 μm was found. The composition of the inclusions gradually changed into the optimal range in the CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO slag system during the LF refining process.

36 MATERIALS SCIENCE↗

Syntheses, structures, and optical properties of Ba{sub 4}MInSe{sub 6} (M=Cu, Ag)

Two new quaternary chalcogenides, namely Ba{sub 4}MInSe{sub 6} (M=Cu, Ag), were synthesized by solid state reactions. These two isostructural compounds adopt the Ba{sub 2}MnS{sub 3} structure type in the orthorhombic space group Pnma. In the structure, the M and In atoms randomly occupy one crystallographic unique metal position with the molar ratio of 1:1 The (M/In)Se{sub 4} tetrahedra are connected to each other by corner-sharing to form one-dimensional chains along the b direction, which are separated by mono-capped trigonal prismatically coordinated Ba atoms. Based on the diffuse reflectance spectrum, the optical band gaps were determined to be 2.23(2) and 2.41(2) eV for Ba{sub 4}CuInSe{sub 6} and Ba{sub 4}AgInSe{sub 6}, respectively. - Graphical abstract: In the structure of Ba{sub 4}MInSe{sub 6} (M=Cu, Ag), the (M/In)Se{sub 4} tetrahedra are connected by corner-sharing to form chains along the b direction, which are separated by Ba atoms. Highlights: Black-Right-Pointing-Pointer Two new quaternary chalcogenides, Ba{sub 4}MInSe{sub 6} (M=Cu, Ag), were synthesized. Black-Right-Pointing-Pointer Ba{sub 4}MInSe{sub 6} (M=Cu, Ag) are isostructural and crystallize in the Ba{sub 2}MnS{sub 3} structure type Black-Right-Pointing-Pointer The (M/In)Se{sub 4} tetrahedra are connected by corner-sharing to form chains along the b direction. Black-Right-Pointing-Pointer The chains are separated by mono-capped trigonal prismatically coordinated Ba atoms. Black-Right-Pointing-Pointer The optical band gaps are 2.23(2) and 2.41(2) eV for Ba{sub 4}CuInSe{sub 6} and Ba{sub 4}AgInSe{sub 6}, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of chemical compositions in low-carbon Al-killed enamel steel produced by ultra-fast continuous annealing

The influence of Mn,S and B contents on microstructural characteristics, mechanical properties and hydrogen trapping ability of low-carbon Al-killed enamel steel was investigated. The materials were produced and processed in a laboratory and the ultra-fast continuous annealing processing was performed using a continuous annealing simulator. It was found that increasing Mn,S contents in steel can improve its hydrogen trapping ability which is attributed by refined ferrite grains, more dispersed cementite and added MnS inclusions. Nevertheless, it deteriorates mechanical properties of steel sheet. Addition of trace boron results in both good mechanical properties and significantly improved hydrogen trapping ability. The boron combined with nitrogen segregating at grain boundaries, cementite and MnS inclusions, provides higher amount of attractive hydrogen trapping sites and raises the activation energy for hydrogen desorption from them. - Highlights: • We study microstructures and properties in low-carbon Al-killed enamel steel. • Hydrogen diffusion coefficients are measured to reflect fish-scale resistance. • Manganese improves hydrogen trapping ability but decrease deep-drawing ability. • Boron improves both hydrogen trapping ability and deep-drawing ability. • Both excellent mechanical properties and fish-scale resistance can be matched.

36 MATERIALS SCIENCE↗

Re-analysis of the T2KK physics potential with backgrounds

The Tokai-to-Kamioka-and-Korea (T2KK) neutrino oscillation experiment is one of the ideas to measure the neutrino mass hierarchy and the CP phase in the lepton flavor mixing matrix. We re-analyze the physics potential of the T2KK experiment by taking into account the smearing of reconstructed neutrino energy due to finite resolution of electron or muon energies, nuclear Fermi motion and resonance production, as well as the neutral current pi{sup 0} production background to the nu{sub m}u->nu{sub e} oscillation signal. It is found that the mass hierarchy pattern can still be determined at 3alpha level if sin{sup 2}2theta{sub 13} ident to 4|U{sub e3}|{sup 2}(1-|U{sub e3}|{sup 2}) > or approx. 0.08(0.09), when the hierarchy is normal (inverted) with 5x10{sup 21} POT (protons on target) exposure, for a combination of relatively large (3.0 deg.) off-axis angle beam at Super-Kamiokande (SK) and small (0.5 deg.) off-axis angle at 100 kton water Cerenkov detector in Korea (L = 1000 km). delta{sub MNS} can still be constrained with an accuracy of approx =+-45 deg. (+-60 deg.) at 1 sigma level for the normal (inverted) hierarchy with the above exposure when sin{sup 2}theta{sub 13} > or approx. 0.04 and delta{sub MNS} = 0 deg. This talk is based on Ref. [1].

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗