1520 Poster 3 of 5: Experimental structural dynamics and modal analysis unlock the principal components of dynamics.
Abstract not provided.
Jensen, Sara Elizabeth↗
SEARCH · Search NASA
Results for “Modal analysis”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A Tutorial on Nonlinear Modal Analysis in Structural Dynamics
Explore the source record for details and available documents.
Kuether, Robert J. [Sandia National Laboratories (↗
Piezoelectric Actuation of Graphene-Coated Polar Structures
Ferroelectric materials based on lead zirconate titanate (PZT) are widely used as sensors and actuators because of their strong piezoelectric activity. However, their application is limited because of the high processing temperature, brittleness, lack of conformal deposition, and a limited possibility to be integrated with the microelectromechanical systems (MEMS). Recent studies on the piezoelectricity in the 2-D materials have demonstrated their potential in these applications, essentially due to their flexibility and integrability with the MEMS. In this work, we deposited a few layer graphene (FLG) on the amorphous oxidized Si 3 N 4 membranes and studied their piezoelectric response by sensitive laser interferometry and rigorous finite-element modeling (FEM) analysis. Modal analysis by FEM and comparison with the experimental results show that the driving force for the piezoelectric-like response can be a polar interface layer formed between the residual oxygen in Si 3 N 4 and the FLG. The response was about 14 nm/V at resonance and could be further enhanced by adjusting the geometry of the device. These phenomena are fully consistent with the earlier piezoresponse force microscopy (PFM) observations of the piezoelectricity of the graphene on SiO 2 and open up an avenue for using graphene-coated structures in the MEMS.
36 MATERIALS SCIENCE↗
Magnetic Gears: The Key to Robust, Cost-Effective Hydropower Drivetrains
Based on previous demonstrated success at fabricating 5 and 10 kW scale magnetic gearbox (MGB) prototypes, Emrgy and its partners (the project team) proposed to design and construct a 100 kW scale MGB with a 30:1 gear ratio for the low-head hydro applications. The Statement of Project Objectives included tasks covering: 1) Market Applicability; 2) Technical Metrics; 3) Design (initial); 4) Electromagnetic (EM) Load and Structural Analysis; 5) Modal Analysis; 6) Sealing Design and 7) Final Design during Budget Period 1. Budget Period 2 included tasks covering: 1) Materials Procurement and Test Plan Development; 2) Assembly; and 3) Testing. The Market Applicability study (Task 1) led to a clear conclusion and recommendation toward “Low Head” technologies for maximum market share of both New Stream Reach development as well as powering Non-Powered Dams. The findings of this study also identified the opportunity for a larger scale magnetic gearbox-based drive train as a function of increased torque, as opposed to increased speed. The Technical Metrics Study (Task 2) concluded a horizontal orientation was preferred, examined potential loss mechanisms, concluded that a Halbach Array magnetic design was preferred, established a 30:1 gear ratio as optimal, and established a power rating of 100 kW as optimal. The subsequent initial and final detailed design process included electro-magnetic (EM) load and structural analysis (Task 4), a Modal analysis (for vibration) (Task 5), and a sealing design (Task 6) to assure water impermeability. The final design package (Task 7) included 729 individual parts, 117 unique part numbers, and 15 assemblies. In order to facilitate procurement, the full bill of materials was broken down into several sub-components: 1) custom magnetic parts; 2) custom machined parts; 3) custom casted parts; and 4) commercial off the shelf (COTS) parts. The casted parts were fabricated by Oak Ridge National Laboratory (ORNL) via a Cooperative Research and Development Agreement (CRADA) with Emrgy and funded by the Advanced Manufacturing Office (AMO). The procurement effort (Task 8) ultimately covered three time periods based on challenges encountered in meeting the budgeted cost for the prototype. Following the first effort in the early stages of Budget Period 2 in 2017, a no-cost time extension was granted to seek alternative fabrication and procurement options. The project was re-booted in 2020 based on the new ORNL CRADA that would focus on five (5) of the more difficult and expensive parts using their advanced manufacturing expertise. Procurement efforts for the other custom machined parts resulted in quotations that still exceeded the budget by more than $\$$100k. This was, in part, also due to the concurrent COVID-19 pandemic that caused both supply chain disruptions and labor shortages. As the project continued, pricing and availability degraded further. In Q2 FY’22, it was decided to not proceed with the fabrication of the prototype (Task 9) based on budgetary limitations. Outcomes included a full and detailed design of a 100 kW magnetic gearbox and associated indented bill of materials (BOM) and CAD drawings, a full assembly instruction manual with an associated BOM for materials necessary to support assembly, the fabrication of the double Halbach magnetic array for the rotor/stator system, fabrication of five (5) sand-casted/machined parts (via CRADA with ORNL) and an initial draft of a comprehensive testing plan. The most significant non-outcome was the actual fabrication and testing of the prototype gearbox based on budget limitations. Lessons learned included the need for an Application / Design / Cost trade analysis to better elucidate the cost potential of the MGB in the projected volumes anticipated for future demand. This would better establish the efficacy of the original cost target ($\$$0.80/Watt) and/or the need for reconsideration of designs and applications. Likewise, additional consideration of the prototype nature of the gearbox – single use, short lifetime, etc. - either as a separate exercise or in place of the design process completed, to reduce the cost of the demonstration prototype device. Additionally, project continuity was cited as a significant risk based on the loss of the primary design engineering firm after Budget Period 1. A design analysis exercise was conducted at the conclusion of the project to identify potential areas for cost reduction. One concept considered was the removal of the inner ring of magnets (with associated changes in the outer ring magnets) to enable a horizontal collapse of the design. It was estimated this could reduce cost by 10-25% without impacting performance.
13 HYDRO ENERGY↗
Failure analysis of a cooling pump using modal and vibration analysis
Four pumps redundantly supply cooling water to a system. All four pumps underwent maintenance during a recently scheduled downtime. During preliminary evaluation following maintenance, one pump, the subject of this document, exhibited higher vibration levels compared to the other three pumps. The pump underwent further performance testing to rule out potential damage resulting from the higher vibration. Vibration analysis and modal analysis including steady state spectrum, operational deflection shape, run up transients, and modal impact have been utilized to identify dynamic characteristics that could contribute to the increased vibration levels. This article will cover the testing setup, methodology, analysis results, and recommendations.
42 ENGINEERING↗
Multi-Modal Energy Analysis for Freight
This project addresses the impact of emerging technologies on inter-city freight energy demand, shipping time, and cost. Technologies addressed include electrified long-haul trucks, connectivity and efficient operations, and platooning. The research questions are addressed using national level analysis, a multi-modal inter-city freight energy model, and development of a Freight Mobility Energy Productivity (F-MEP) metric. This project improves on prior analysis and modeling by increasing the geographic and temporal resolution of freight flows. The inter-city freight energy model uses a bi-level optimization approach to minimize total network cost (lower level) and energy (upper level). Two new F-MEP frameworks are presented, one for intra-city freight mobility and one for inter-city freight mobility.
47 OTHER INSTRUMENTATION↗
Frequency domain assurance criterion for defect detection in additively manufactured parts
Additive manufacturing (AM) is a very desirable manufacturing method for industries such as aerospace and automotive due to its ability to create internal features and complex geometries, however, these characteristics also present challenges for nondestructive evaluation (NDE) and defect detection. Dynamic analysis and modal analysis have shown promise for NDE and identifying flaws in AM parts. Frequency Domain Assurance Criterion (FDAC) is a method of dynamic evaluation that represents the degree of correlation between two sets of operational deflection shapes (ODS) at each spectral line. Using colormaps to display the results allows for quick and easy interpretation of parts’ similarities and differences. This method appears to show promise in identifying parts with minor defects and can be used to differentiate nominal and defective parts. This paper explores the use of FDAC on various AM parts with and without intentional defects.
Deonarain, G↗
A quantitative assessment of the model form error of friction models across different interface representations for jointed structures
Hysteretic models are widely used to model frictional interactions in joints to recreate experimental behavior. However, it is unclear which models are best suited for fitting or predicting the responses of structures. Here, the present study evaluates 26 friction model/interface representation combinations to quantify the model form error. A Quasi-Static Modal Analysis approach (termed Rayleigh Quotient Nonlinear Modal Analysis) is adopted to calculate the nonlinear system response, and a Multi-Objective Optimization is solved to fit experimental data of the first mode of the Brake-Reuß Beam. Optimized parameters from the first mode are applied to the second and third bending modes to quantify the predictive ability of the models. Formulations for both tracing full hysteresis loops and recreating hysteresis loops from a single loading curve (Masing assumptions) are considered. Smoothly varying models applied to a five patch representation showed the highest flexibility (for fitting mode 1) and good predictive potential (for modes 2 and 3). For a second formulation, which uses 152 frictional elements to represent the interface, the physically motivated spring in series with a Coulomb slip model (elastic dry friction) has high error for fitting mode 1 and performs near the middle for predicting higher modes. For both interface representation, the best fit models are not the most physical, but rather the ones with the most parameters (as expected); however, the more physical models perform somewhat better for predicting the higher modes.
42 ENGINEERING↗
Sensitivity Analysis of Modal Parameters of a Jacket Offshore Wind Turbine to Operational Conditions
Accurate estimation of offshore wind turbine (OWT) modal parameters has a prominent effect on the design loads, lifetime prediction, and dynamic response of the system. Modal parameters can vary during the operation of OWTs. This paper studies the variation and sensitivity analysis of an OWT’s modal parameters with respect to operational and environmental conditions. Three finite element models of a jacket-supported OWT at the Block Island Wind Farm are created within the OpenSees, SAP2000, and OpenFAST platforms and validated using experimental measurements. The OpenFAST model is used to simulate the modal parameters of the turbine under various wind speed, rotor speed, power, yaw angle, mean sea level, blade pitch angle, and soil spring values. The model-predicted modal parameters of the first fore–aft (FA) and side–side (SS) modes are compared to those identified from experimental measurements. Results from the simulations show that the first FA natural frequency and damping ratio mostly depend on the rotor speed and wind speed, respectively, while yaw angle and mean sea level do not have a visible effect. It is observed that there is about 8% stiffening in the first FA frequency and an aerodynamic damping of 7.5% during the operation of the OWT.
17 WIND ENERGY↗
Characterization and Damping Control of Mechanical Connections to Improve Performance of Horn Stripline
Magnetic focusing horns are critical components for creating a stable beam of neutrinos for neutrino facilities, such as the Long Baseline Neutrino Facility (LBNF) and the Neutrinos and Main Injector (NuMI) beam lines at Fermilab. The pulsed magnetic horns are powered by high current electricity through long striplines. In addition to requirements for low inductance and voltage standoff, the striplines must survive in a harsh radiation environment for the operational life of the component, specified as the 100 million pulses requirement for LBNF. Each stripline assembly consists of four (eight layers that splits off to 2 pairs of four layers at the horn interface) layers of Al 6101-T6. As an electromechanical system, the stripline layers are bolted together with ceramic isolators for electrical insulation and connections must facilitate passive cooling and mechanical stability. The striplines experience vibrational force in addition to clamping force, repetitive thermal and electro-magnetic loading. The holes of stripline plates for ceramic joints represent one of the weak links for potential failure [1,2]. By characterizing the contact behavior of these joints and optimizing their damping properties through finite element analysis and experimental modal analysis, stripline performance and longevity can be improved. This study not only helps predict the behavior of the striplines but also improves their performance to meet the required operational lifetime.
Liu, Zunping [Fermilab]↗
Transitioning from Simulation to Reality: Applying Chatter Detection Models to Real-World Machining Data
Chatter, a self-excited vibration phenomenon, is a critical challenge in high-speed machining operations, affecting tool life, product surface quality, and overall process efficiency. While machine learning models trained on simulated data have shown promise in detecting chatter, their real-world applicability remains uncertain due to discrepancies between simulated and actual machining environments. The primary goal of this study is to bridge the gap between simulation-based machine learning models and real-world applications by developing and validating a Random Forest-based chatter detection system. This research focuses on improving manufacturing efficiency through reliable chatter detection by integrating Operational Modal Analysis (OMA), Receptance Coupling Substructure Analysis (RCSA), and Transfer Learning (TL). The study applies a Random Forest classification model trained on over 140,000 simulated machining datasets, incorporating techniques like Operational Modal Analysis (OMA), Receptance Coupling Substructure Analysis (RCSA), and Transfer Learning (TL) to adapt the model for real-world operational data. The model is validated against 1600 real-world machining datasets, achieving an accuracy of 86.1%, with strong precision and recall scores. The results demonstrate the model’s robustness and potential for practical implementation in industrial settings, highlighting challenges such as sensor noise and variability in machining conditions. This work advances the use of predictive analytics in machining processes, offering a data-driven solution to improve manufacturing efficiency through more reliable chatter detection.
42 ENGINEERING↗
Transverse mode analysis for free-space laser beams using Bayesian analysis
Reliable and rapid assessment of the transverse mode quality of a free-space laser beam has a wide range of applications in laser development, research, and utilization. It has become even more important with recent advances in developing orbital angular momentum photon beams across a broad spectral region. In this work, a general modal analysis method for a free-space multimode laser beam has been developed based on Bayesian analysis. After transforming mode decomposition into a linear system problem, a Gaussian probabilistic model is used to find a closed-form solution. The method is found to be robust with the presence of Gaussian noise. Prior knowledge about the mode content can be incorporated into the method to improve the solution for situations when coherent disturbances or contamination are present in the laser beam. This method can be used to analyze the mode content for laser beams in different bases, such as Hermite–Gaussian (HG) modes and Laguerre–Gaussian (LG) modes. Three applications of this method are presented: a detailed modal analysis of the beam image from the incoherent intensity addition of HG modes and two examples of mode decomposition using the complex wavefront from the coherent superposition of HG and LG modes. The feasibility of this method is demonstrated using various simulation results. Based on digital images of a laser beam recorded without complex wavelength-limiting optics, in principle, this method can be used in a wide wavelength range from infrared to ultraviolet, and possibly x ray.
Liu, Peifan (ORCID:0000000273816153)↗
Delivering real-time multi-modal materials analysis with enterprise beamlines
Contemporary advancements in low-cost automation and computation, reduced barrier to entry in developing artificial intelligence/machine learning (AI/ML), and increased ability to represent complex materials in digital form have led to a number of accelerated materials discovery platforms. However, many of these approaches operate with completely rigid vertical integration in an isolated feedback loop using limited modalities. In order to make a substantial impact on discovering new energy materials, AI-driven experiments must operate collaboratively with each other and researchers and over multiple measurement modalities. Herein, we describe the potential for an “internet of things” approach to self-driving enterprise beamlines that merges core information technologies, robotics, and multi-modal AI. The approach will enable full utility of light sources, collaborate effectively with other remote materials acceleration platforms, and help stride toward the world’s energy future.
36 MATERIALS SCIENCE↗
Multi-modal surface analysis of porous films under operando conditions
Practical catalysts with a porous framework, such as zeolites, host catalytic reactions at active sites engrained in the pores and channels of the scaffold. The mechanism of interaction at these active sites, defining catalyst performance, remains elusive, in large part, due to the lack of surface characterization methods available for thick films or powders. Here, we present thin film analogs of practical catalysts that allow for the implementation of surface characterization tools, including advanced microscopy and operando spectroscopy methodologies. Specifically, we investigated bilayer silica, MFI nanosheets, and UiO-66 thin films using a multi-modal approach addressing film growth, characterization, and gas adsorption aimed at understanding catalytic activity, reactivity, and selectivity properties, as defined by molecular-level changes in the reaction mechanism.
36 MATERIALS SCIENCE↗
Vulcan-Forge: Architecture and Design of a Multi-Modal Forensic Analysis Plugin for CALDERA
Forge and VULCAN together describe an open-architecture cybersecurity analysis ecosystem that unifies forensic artifact processing, detection engineering, and vulnerability intelligence within integrated platforms. Forge operates as a plugin for MITRE CALDERA, ingesting diverse evidence formats—including EVTX, PCAP/PCAPNG, CSV, JSON, YAML, XML, binaries, and archives—to construct a unified artifact graph enriched with severity scoring, TLP classification, and audit trails. It provides subsystems for artifact parsing, streaming structured-data visualization, NetworkMiner-based packet inspection, PE/.NET binary analysis, and LLM-assisted triage and rule generation, with outputs validated against CCCS-YARA and pySigma schemas. VULCAN complements this by serving as a cybersecurity analyst platform that integrates a Neo4j knowledge graph, Qdrant vector retrieval, SSVC-based triage, and a local LLM to deliver CVE intelligence and forensic analysis through a multi-source ingest pipeline drawing from NVD, CISA KEV, EPSS, MITRE ATT&CK, and CAPEC. Together, they bridge structured threat intelligence with automated forensic analysis and detection workflows.
97 MATHEMATICS AND COMPUTING↗
Principal Component Analysis for Modal Optimization in Resonant Ultrasound Spectroscopy
Explore the source record for details and available documents.
Beardslee, Luke Berny↗
Diagnosing low-mode (ℓ < 6) and mid-mode (6 ≤ ℓ ≤ 60) asymmetries in the post-stagnation phase of laser-direct-drive deuterium–tritium cryogenic implosions on OMEGA
Low- and mid-mode perturbations are possible candidates for performance limitations in cryogenic direct-drive implosions on the OMEGA laser at the Laboratory of Laser Energetics. Simulations with a 3D hydrocode demonstrated that hotspot imagers do not show evidence of the shell breakup in the dense fuel. However, these same simulations revealed that the low- and mid-mode perturbations in the dense fuel could be diagnosed more easily in the post-stagnation phase of the implosion by analyzing the peak in the x-ray emission limb at the coronal–fuel interface than before or at the stagnation phase. In experiments, the asymmetries are inferred from gated images of the x-ray emission of the implosion by using a 16-pinhole array imager filtered to record x-ray energies >800 eV and an x-ray framing camera with 40-ps time integration and 20-μm spatial resolution. Furthermore, a modal analysis is applied to the spatial distribution of the x-ray emission from deuterium and tritium cryogenic implosions on OMEGA recorded after the bang time to diagnose the low- and mid-mode asymmetries, and to study the effect that the beam-to-target ratio (Rb/Rt) has on the shell integrity.
47 OTHER INSTRUMENTATION↗