Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

The correlation between shear elastic modulus and glass transition temperature of bulk metallic glasses

Based on Varshni equation, the shear elastic modulus at the glass transition temperature [G(T{sub g})] and the shear elastic modulus at 0 K [G(0)] were calculated from the elastic modulus measured at room temperature for various bulk metallic glasses (BMGs). The G(T{sub g})/G(0) ratios for various BMGs are almost the same and have a value around 0.85. This unique correlation implies that the glass transition occurs when the shear modulus of a BMG decreases to about 85% of G(0). This correlation between shear modulus and glass transition is of significance in understanding the glass transition of BMGs.

36 MATERIALS SCIENCE↗

Linear Correlation Between Binding Energy and Young’s Modulus in Graphene Nanoribbons

Graphene nanoribbons (GNRs) have been suggested as a promising material for its use as nanoelectromechanical reasonators for highly sensitive force, mass, and charge detection. Therefore the accurate determination of the size-dependent elastic properties of GNRs is desirable for the design of graphene-based nanoelectromechanical devices. In this study we determine the size-dependent Young’s modulus and carbon-carbon binding energy in a homologous series of GNRs, C4n2+6n+2H6n+4 (n=2–12), with the use of all electron first principles computations. An unexpected linearity between the binding energy and Young’s modulus is observed, making possible the prediction of the size-dependent Young’s modulus of GNRs through a single point energy calculation of the GNR ground state. A quantitative-structure-property relationship is derived, which correlates Young’s modulus to the total energy and the number of carbon atoms within the ribbon. In the limit of extended graphene sheets we determine the value of Young’s modulus to be 1.09 TPa, in excellent agreement with experimental estimates derived for graphite and suspended grapheme sheets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transverse Young's modulus of carbon/glass hybrid fiber composites

Hybrid fiber composites offer designers a means of tailoring the stress–strain behavior of lightweight materials used in high-performance structures. While the longitudinal stress–strain behavior of unidirectional hybrid fiber composites has been thoroughly evaluated experimentally and analytically, relatively little information is available on the transverse behavior. The objective of the current investigation is to present data on the transverse modulus of elasticity of unidirectional composites with five different ratios of carbon and glass fiber and to compare the data with predictive and fitted models. The transverse modulus increases monotonically with the proportion of glass fiber in the composite. Finite element analysis was used to evaluate different ways to model voids in the matrix and allowed the unknown transverse properties of the carbon fibers to be backed out using experimental data from the all-carbon composite. The finite element results show that the transverse modulus can be accurately modeled if voids are modeled explicitly in the matrix region and if modulus is calculated based on stress applied along the minimum interfiber distance path between adjacent fibers arranged in a rectangular array. The transverse modulus was under-predicted by the iso-stress model and was well predicted by a modified iso-stress model and a modified Halpin–Tsai model.

Materials Science↗

Improved Calculation of the Young’s Modulus of Rectangular Prisms from Their Resonant Frequency Overtones by Identifying Appropriate Shear Constants

Young’s modulus is an important parameter for characterizing the strength of, and wave propagation through, a given material. This study improves the estimation of Young’s modulus using the impulse excitation technique based on an experimental analysis of 19 borosilicate glass bars. Analysis of the frequency equations relating Young’s modulus to the out-of-plane and in-plane flexural resonant frequencies of rectangular prisms has been conducted for both the fundamental frequency and its overtones at higher orders of vibration. Furthermore, the Young’s moduli of three novaculite rocks with various porosities were then measured up to the seventh order of vibration to validate the optimum shear constant equation for estimating Young’s modulus. Young’s modulus was found to be nearly frequency independent for these rock samples.

Impulse excitation↗

Indentation-derived elastic modulus of multilayer thin films: Effect of unloading induced plasticity

Nanoindentation is useful for evaluating the mechanical properties, such as elastic modulus, of multilayer thin film materials. A fundamental assumption in the derivation of the elastic modulus from nanoindentation is that the unloading process is purely elastic. In this work, the validity of elastic assumption as it applies to multilayer thin films is studied using the finite element method. The elastic modulus and hardness from the model system are compared to experimental results to show validity of the model. Plastic strain is shown to increase in the multilayer system during the unloading process. Additionally, the indentation-derived modulus of a monolayer material shows no dependence on unloading plasticity while the modulus of the multilayer system is dependent on unloading-induced plasticity. Lastly, the cyclic behavior of the multilayer thin film is studied in relation to the influence of unloading-induced plasticity. Furthermore, it is found that several cycles are required to minimize unloading-induced plasticity.

36 MATERIALS SCIENCE↗

Failure Stress and Apparent Elastic Modulus of Diesel Particulate Filter Ceramics

Three established mechanical test specimen geometries and test methods used to evaluate mechanical properties of brittle materials are adapted to the diesel particulate filter (DPF) architecture to evaluate failure initiation stress and apparent elastic modulus of the ceramics comprising DPFs. The three custom-designed test coupons are harvested out of DPFs to promote a particular combination of orientation of crack initiation and crack plane. The testing of the DPF biaxial flexure disk produces a radial tensile stress and a crack plane parallel with the DPF's longitudinal axis. The testing of the DPF sectored flexural specimen produces axial tension at the DPF's OD and a crack plane perpendicular to the DPF's longitudinal axis. The testing of the DPF o-ring specimen produces hoop tension at the DPF's original outer diameter (OD) and at the inner diameter of the test coupon, and a crack plane parallel to the DPF's longitudinal axis. The testing of these mechanical test coupons also enables the determination of an apparent elastic modulus of the DPF ceramic material. Results consistently show that the apparent elastic modulus of the DPF ceramics is much less (e.g., up to an order of magnitude less) than apparent elastic modulus estimated using sonic- or resonance-based test methods. These specimen geometries, produced stress states, and modes of consequential crack initiation are discussed in context to the DPF's symmetry along with the assessments of each specimen's ease of fabrication, testing, failure stress determination, ultimate viability, and prospects for test standardization. Lastly, an explanation is offered for why the apparent elastic modulus measured with these three mechanical test coupons is relatively low and why their low values are more accurate for predicting thermomechanical stresses in DPFs.

36 MATERIALS SCIENCE↗

Ab initio study of phase transition and bulk modulus of NaH

The phase transition of NaH from NaCl- to CsCl-type structure is investigated by an ab initio plane-wave pseudopotential density functional theory method with the norm-conserving pseudopotential scheme in the frame of the generalized gradient approximation correction; the isothermal bulk modulus and its first and second pressure derivatives of the NaCl- and CsCl-type structures under high pressure and temperature are obtained through the quasi-harmonic Debye model. The phase transition obtained from the usual condition of equal enthalpies occurs at the pressure of 32 GPa, which is consistent with the experimental and other calculated values. Through the quasi-harmonic Debye model, in which the phononic effects are considered, the dependences of cell volume V and lattice constant a on temperature T at zero pressure, the isothermal bulk modulus B{sub 0} and its pressure derivatives B{sub 0}'and B{sub 0}'' on pressure P along isotherms 0, 300, and 600 K, are also successfully obtained. -- The isothermal bulk modulus B{sub T}, adiabatic bulk modulus B{sub S}, primitive cell volume V, and lattice constant a of an NaH with an NaCl-type structure as a function temperature T at zero pressure. When T<100 K, B nearly keeps constant; when T>100 K, B decreases dramatically as T increases. Correspondingly, when T<100 K, the primitive cell volume and lattice parameter of an NaH with an NaCl-type structure have a little change; when T>100 K, the primitive cell volume and lattice parameter changes rapidly as T increases. It is the rapid volume or lattice parameter variation that makes the bulk modulus B rapidly decrease. Display Omitted Research highlights: The transition phase of an NaH from NaCl to CsCl structure has been investigated. The relationship between B and T for an NaH at zero pressure has been given. The B{sub T} and its pressure derivatives of an NaH at high pressure have been obtained.

36 MATERIALS SCIENCE↗

Experimental evaluation of shear modulus scaling of dynamic strength at extreme pressures

Recent progress in the development of dynamic strength experimental platforms is allowing for unprecedented insight into the assumptions used to construct constitutive models operating in extreme conditions. In this work, we make a quantitative assessment of how tantalum strength scales with its shear modulus to pressures of hundreds of gigapascals through a cross-platform examination of three dynamic strength experiments. Specifically, we make use of Split–Hopkinson pressure bar and Richtmyer–Meshkov instability experiments to assess the low-pressure strain and strain rate dependence. Concurrent examination of magnetically driven ramp-release experiments up to pressures of 350GPa allows us to examine the pressure dependence. In this work, using a modern description of the shear modulus, validated against both ab initio theory and experimental measurements, we then assess how the experimentally measured pressure dependence scales with shear modulus. Furthermore, we find that the common assumption of scaling strength linearly with the shear modulus is too soft at high pressures and offer discussion as to how descriptions of slip mediated plasticity could result in an alternative scaling that is consistent with the data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the use of peak-force tapping atomic force microscopy for quantification of the local elastic modulus in hardened cement paste

A surface of epoxy-impregnated hardened cement paste was investigated using a novel atomic force microscopy (AFM) imaging mode that allows for the quantitative mapping of the local elastic modulus. The analyzed surface was previously prepared using focussed ion beam milling. The same surface was also characterized by electron microscopy and energy-dispersive X-ray spectroscopy. We demonstrate the capability of this quantitative nanomechanical mapping to provide information on the local distribution of the elastic modulus (from about 1 to about 100 GPa) with a spatial resolution in the range of decananometers, that corresponds to that of low-keV back-scattered electron imaging. Despite some surface roughness which affects the measured nanomechanical properties it is shown that topography, adhesion and Young's modulus can be clearly distinguished. The quantitative mapping of the local elastic modulus is able to discriminate between phases in the cement paste microstructure that cannot be distinguished from the corresponding back-scattered electron images.

36 MATERIALS SCIENCE↗

Achieving ultrahigh modulus of resilience and enhanced thermal stability in ZnO x /SU-8 interpenetrating network polymer nanocomposite nanopillars

The modulus of resilience, a mechanical property that quantifies the maximum strain energy density a material can store during elastic deformation, is a crucial parameter for materials used in flexible displays, micro/nano-electro-mechanical system (M/NEMS) actuators, and ultra-sensitive pressure sensors. In this study, ZnO x /SU-8 nanocomposite nanopillars with a diameter of 300 nm, fully infiltrated with a uniformly distributed, interpenetrating amorphous ZnO x filler network, were synthesized via vapor-phase infiltration (VPI). In-situ uniaxial nano-compression tests revealed that the modulus of resilience of ZnO x /SU-8 reaches ∼ 12 MJ/m 3 , which is an ultrahigh value among all engineering materials with comparable strength. In addition, the synthesis fidelity, inorganic infiltration depth, and mechanical performance were all significantly improved compared to VPI-synthesized AlO x nanocomposites. Thermal stability, another key requirement for M/NEMS device materials operating under extreme environments, was also notably enhanced. Furthermore, partial crystallization of the amorphous ZnO x fillers during annealing contributed to an additional increase in modulus of resilience, reaching up to ∼ 13.9 MJ/m 3 . This work presents an effective fabrication strategy for producing nanostructured organic–inorganic hybrid nanocomposites with ultrahigh modulus of resilience and superior thermal stability, paving the way for their integration into next-generation flexible displays and high-performance M/NEMS devices working under harsh environments.

36 MATERIALS SCIENCE↗

Direct measurement and calculation of rubber bulk modulus by piston-cylinder method using conventional mechanical testing equipment

This article describes a method to directly measure the bulk modulus of rubber using a piston-cylinder type apparatus. The function of the testing apparatus is to reliably transfer load to the water inside the vessel and allow for the accurate and continuous measurement of volumetric displacement as the contents are compressed. During the test, load is applied to a piston-cylinder containing the rubber test sample and water using a conventional mechanical testing load frame. Load and the travel of the piston are recorded by a load cell and extensometer, respectfully. A brass or stainless steel plug of the same dimensions as the test sample is tested as a control sample to isolate the compliance of the system, including the compressibility of water and compliance of the piston-cylinder. The results from this control test are used to disincorporate the compliance of the system from the sample test results. Load-linear displacement data are mathematically converted to pressure-volumetric displacement data, from which bulk modulus is calculated. The test apparatus and method are validated using the known bulk modulus of water. Finally, the bulk modulus for two similar rubbers is evaluated. The validity of the results and limitations of the device are discussed.

36 MATERIALS SCIENCE↗

Generic relation between the electron work function and Young's modulus of metals

In this study, efforts were made to establish a generic relation between the Young's modulus and the electron work function of polycrystalline metals, in which Young's Modulus was defined as the second order derivative of interaction potential with respect to the equilibrium distance. The obtained Young's modulus shows a sextic relation with the work function. Data of Young's modulus and work function of polycrystalline metals, including Alkali earth metals, transition metals, and rare earth metals, can be fitted reasonably well by this derived generic relationship.

36 MATERIALS SCIENCE↗

Interfacial Strength in Hierarchical Carbon Fiber Composites: Interplay of Interphase Modulus and Roughness

A facile, direct deposition approach that exploits van der Waals interactions between carbonaceous materials is utilized to create unidirectional hybrid carbon fiber composites. Two small molecule crosslinkers, a trifunctional aromatic (TL) and a difunctional aliphatic (DL) acyl chloride, are first utilized to create a crosslinked interphase with a softer and stiffer modulus respectively. TL crosslinked interphase with a higher modulus improved the tensile strength by 50%, despite non-covalent linking between fiber and matrix, elucidating the critical role of the interphase in alleviating modulus mismatch between the high modulus carbon fiber and the rubbery matrix. Fractional quantities of carbon nanotubes are additionally dispersed in the small molecule crosslinkers which behaved as a dispersant, helping introduce nanoasperities on the carbon fiber surface. Strong “pi-pi” interactions between CNTs and CF contributed to tensile properties, which are increased by 66% compared to the control. A cohesive zone model suggests that a stiffer interphase is better able to exploit surface heterogeneities and roughness on the fiber, synergistically enhancing interfacial strength.

36 MATERIALS SCIENCE↗

Influence of the cementitious paste composition on the E-modulus and heat of hydration evolutions

E-modulus and heat of hydration are features of cement-based materials that follow a rapid rate of change at early ages. This paper analyses the influence of the composition of cementitious pastes on these features by using two methods: (i) a novel technique for continuously monitoring the E-modulus of cement-based materials, based on evaluating the first resonant frequency of a composite beam containing the material under testing, and (ii) an isothermal calorimeter to determine the released heat of hydration. Seventeen mixes are tested, encompassing pastes with five w/c ratios, as well as different contents of limestone filler, fly ash, silica fume and metakaolin. The results permit the comparison of the E-modulus and heat of hydration sensitivities to mix composition changes, and to check possible relations between these features. This work also helps to establish the technique (i) as a non-destructive method for monitoring the E-modulus evolution in cement-based materials since casting.

36 MATERIALS SCIENCE↗

Measurement of Young’s modulus and damping of fibers at cryogenic temperatures

High-yield inertial confinement fusion targets are at cryogenic temperatures and must remain stable to within 10 um during the implosion. Young’s modulus and damping properties of fibers used to mount cryogenic targets are needed to design stable targets, but these property values do not exist in literature. A novel experimental method that tracks how target vibrations respond to an impulse is used to quantitatively measure these properties from 295 to 20 K. Young’s modulus and the critical damping ratio are measured for Nicalon^TM ceramic grade [silicon carbide (SiC)], Zylon HM {poly[p-phenlyne- 2,6-benzobisoxazole] (PBO)}, M5 {dimidazo-pyridinylene [dihydroxy] phenylene (PIPD)}, and polyimide fibers. This method allows one to accurately measure the properties of interest for fiber diameters as small as 12 um at ~ 20 K. Significant changes are seen in Young’s modulus for the three polymeric fibers with respect to temperature; while Young’s modulus is relatively invariant to temperature for the ceramic fiber.

Cryogenic temperature↗

Hardness and modulus of Fe2B, Fe3(C,B), and Fe23(C,B)6 borides and carboborides in the Fe-C-B system

Highlights: • Hardness and modulus of the Fe{sub 2}B, Fe{sub 3}(C,B), Fe{sub 23}(C,B){sub 6} and M{sub 7}C{sub 3} phases are analyzed. • Hardness and modulus of the Fe{sub 3}(C,B) phase are increasing with its B content. • Size effects are apparent for hardness of Fe{sub 2}B, Fe{sub 3}(C,B), Fe{sub 23}(C,B){sub 6} and M{sub 7}C{sub 3}. • The model of Nix and Gao was used to evaluate the load-independent hardness H{sub 0}. • Hardness ranking is Fe{sub 2}B > M{sub 7}C{sub 3} > Fe{sub 3}(C,B) > Fe{sub 23}(C,B){sub 6} - Abstract: This work provides a comparative and comprehensive study of the indentation hardness and indentation modulus of iron-rich borides and carboborides of types Fe{sub 2}B, Fe{sub 3}(C,B), and Fe{sub 23}(C,B){sub 6}. In addition, the hardness and elastic modulus of Cr-rich M{sub 7}C are investigated for comparative purposes. We investigated the impact of increasing B content and indentation size effect (ISE). The phases of interest were stabilized in cast Fe-C-B alloys that varied with respect to the B / (B + C) ratio and heat treatment. The resulting microstructures were characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and wavelength X-ray spectroscopy (WDS). Dynamic in-situ nanoindentation experiments based on the method of continuous stiffness measurement (CSM) were coupled to SEM and EBSD investigations to determine the mechanical properties of the individual borides and carboborides as a function of the indentation depth. The results were compared to values obtained for the Cr-rich M{sub 7}C{sub 3} carbide. It was found that the hardness of the B-rich Fe{sub 3}(C{sub ,}B) phase is considerably higher than pure Fe{sub 3}C and increases with increasing B content. The ISE was present in all investigated phases, and the hardness decreased as a function of indentation depth. The hardness at infinite indentation depth H{sub 0} was estimated according to the model of Nix and Gao. The Fe{sub 2}B phase was found to be the hardest phase (H{sub 0} = 19.04 GPa), followed by M{sub 7}C{sub 3} (H{sub 0} = 16.43 GPa), Fe{sub 3}(C,B) (H{sub 0} = 11.18 to 12.24 GPa), and Fe{sub 23}(C,B){sub 6} (H{sub 0} = 10.39 GPa).

36 MATERIALS SCIENCE↗

Structural relaxation driven increase in elastic modulus for a bulk metallic glass

The change in elastic modulus as a function of temperature was investigated for a zirconium-based bulk metallic glass. High temperature nano-indentation was done over a wide temperature range from room temperature to the glass-transition. At higher temperature, there was a transition from inhomogeneous to homogeneous deformation, with a decrease in serrated flow and an increase in creep displacement. Hardness was found to decrease, whereas elastic modulus was found to increase with temperature. The increase in elastic modulus for metallic glass at higher temperature was explained by diffusive rearrangement of atoms resulting in free volume annihilation. This is in contrast to elastic modulus increase with temperature for silicate glasses due to compaction of its open three dimensional coordinated structure without any atomic diffusion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A high-damping magnetorheological elastomer with bi-directional magnetic-control modulus for potential application in seismology

A high-damping magnetorheological elastomer (MRE) with bi-directional magnetic-control modulus is developed. This MRE was synthesized by filling NdFeB particles into polyurethane (PU)/ epoxy (EP) interpenetrating network (IPN) structure. The anisotropic samples were prepared in a permanent magnetic field and magnetized in an electromagnetic field of 1 T. Dynamic mechanical responses of the MRE to applied magnetic fields are investigated through magneto-rheometer, and morphology of MREs is observed via scanning electron microscope (SEM). Test result indicates that when the test field orientation is parallel to that of the sample's magnetization, the shear modulus of sample increases. On the other hand, when the orientation is opposite to that of the sample's magnetization, shear modulus decreases. In addition, this PU/EP IPN matrix based MRE has a high-damping property, with high loss factor and can be controlled by applying magnetic field. It is expected that the high damping property and the ability of bi-directional magnetic-control modulus of this MRE offer promising advantages in seismologic application.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗