Search NASA⌕ Search

SEARCH · Search NASA

Results for “Molecular mobility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A molecular design approach towards elastic and multifunctional polymer electronics

Next-generation wearable electronics require enhanced mechanical robustness and device complexity. Besides previously reported softness and stretchability, desired merits for practical use include elasticity, solvent resistance, facile patternability and high charge carrier mobility. Here, we show a molecular design concept that simultaneously achieves all these targeted properties in both polymeric semiconductors and dielectrics, without compromising electrical performance. This is enabled by covalently-embedded in-situ rubber matrix (iRUM) formation through good mixing of iRUM precursors with polymer electronic materials, and finely-controlled composite film morphology built on azide crosslinking chemistry which leverages different reactivities with C–H and C=C bonds. The high covalent crosslinking density results in both superior elasticity and solvent resistance. When applied in stretchable transistors, the iRUM-semiconductor film retained its mobility after stretching to 100% strain, and exhibited record-high mobility retention of 1 cm 2 V -1 s -1 after 1000 stretching-releasing cycles at 50% strain. The cycling life was stably extended to 5000 cycles, five times longer than all reported semiconductors. Furthermore, we fabricated elastic transistors via consecutively photo-patterning of the dielectric and semiconducting layers, demonstrating the potential of solution-processed multilayer device manufacturing. The iRUM represents a molecule-level design approach towards robust skin-inspired electronics.

42 ENGINEERING↗
DOE OSTI2023

Mechanism of monovalent and divalent ion mobility in Nafion membrane: An atomistic simulation study

Polymer cation exchange membranes (CEMs) are widely used in water treatment processes. The fundamental factors that control the separation and selectivity of cations with different valences in CEMs are not fully understood. In this study, we use atomistic molecular dynamics simulations to investigate the underlying molecular mechanisms that control the mobility of cations with different valences in Nafion membranes. Our results indicate structural differences in binding of monovalent and divalent cations, which gives rise to differences in ion diffusion in Nafion. Monovalent cations are shown to be “territorially” bound, i.e., bound while partially hydrated, to the fixed charge groups whereas divalent cations are shown to be “site” bound, i.e., bound while fully dehydrated, to the charge groups on the polymer. This difference in binding structure gives rise to differences in transport characteristics of cations in Nafion.

Chemistry↗
DOE OSTI2025

What is the Role of Relative Humidity on Conductivity in Polymer Electrolytes?

Ion transport properties in polymer electrolytes have been widely studied under rigorously dry and highly water-swollen conditions. However, the transition between these extremes, i.e., the low hydration regime, is still poorly understood at the molecular level and relevant to applications ranging from battery electrolytes to electrophoretic separations. Here, in this study, we apply atomistic molecular dynamics simulations to probe the role of hydration on ion mobilities and conductivities in LiTFSI-doped polyethers at low water content (less than 10% water by volume), which corresponds to 0−80% relative humidity conditions. With increasing water content, Li + ions exhibit two distinct regimes in their mobilities. At low water content, the majority of the Li + ions are weakly hydrated (two or fewer water molecules per Li + ion), maintaining strong interactions with their polymer solvation cage, and therefore exhibit only a weak increase in mobility relative to dry conditions. As water content increases, Li + ions form complete hydration shells, residing within water-rich domains that promote faster mobilities. Further, Li + mobilities increase more significantly in polymer electrolytes composed of more hydrophilic polymers and higher salt concentrations due to the formation of larger water-rich domains. In contrast, TFSI − has comparatively weak interactions with both the polymer and water, exhibiting a monotonic increase in mobility as a function of water content. Overall, these results help clarify the molecular mechanisms underlying ionic mobilities and conductivities in polymer electrolytes at low water content.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of Framework Composition and NH 3 on the Diffusion of Cu + in Cu-CHA Catalysts Predicted by Machine-Learning Accelerated Molecular Dynamics

Cu-exchanged zeolites rely on mobile solvated Cu + cations for their catalytic activity, but the role of the framework composition in transport is not fully understood. Ab initio molecular dynamics simulations can provide quantitative atomistic insight but are too computationally expensive to explore large length and time scales or diverse compositions. We report a machine-learning interatomic potential that accurately reproduces ab initio results and effectively generalizes to allow multinanosecond simulations of large supercells and diverse chemical compositions. Biased and unbiased simulations of [Cu(NH 3 ) 2 ] + mobility show that aluminum pairing in eight-membered rings accelerates local hopping and demonstrate that increased NH 3 concentration enhances long-range diffusion. The probability of finding two [Cu(NH 3 ) 2 ] + complexes in the same cage, which is key for SCR-NOx reaction, increases with Cu content and Al content but does not correlate with the long-range mobility of Cu + . Supporting experimental evidence was obtained from reactivity tests of Cu-CHA catalysts with a controlled chemical composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Atomic Diffusion, Segregation, and Grain Boundary Migration in Nickel-Based Alloys from Molecular Dynamics Simulations

Grain boundary diffusion and metal mobility in alloys control material performance in many applications and yet remain poorly understood at a mechanistic level. With advances in accessible time and length scales for computational molecular simulations, and recent force field developments, we now possess tools to help unravel those mechanisms. Using large-scale molecular dynamics simulations, here we examined vacancy-mediated diffusion processes in Ni-5Cr alloy with low and high-energy grain boundaries. We show that atomic diffusion inside the grain boundary plane is about four times higher than bulk diffusion, at any temperature, and exhibits a typical Arrhenius behavior with a very small energy barrier (0~.8 eV for Cr and 0.7 eV for Ni within 1300-1600 K). Additionally, the fastest diffusing species inverts; Cr diffusion was faster than Ni in the bulk but slower in the grain boundaries. This is attributed to the creation of high cohesive energy clusters of Cr at the grain boundary. Grain boundary migration was also observed to be temperature dependent and appears to be two times higher in the 5% Cr alloy than in pure Ni, highlighting the important role of the alloying element on grain boundary motion.

Simonnin, Pauline GN↗
DOE OSTI2022

Machine learning prediction of glass transition temperature of conjugated polymers from chemical structure

Predicting the glass transition temperature (T g ) is of critical importance as it governs the thermomechanical performance of conjugated polymers (CPs). Here, we report a predictive modeling framework to predict T g of CPs through the integration of machine learning (ML), molecular dynamics (MD) simulations, and experiments. With 154 T g data collected, an ML model is developed by taking simplified “geometry” of six chemical building blocks as molecular features, where side-chain fraction, isolated rings, fused rings, and bridged rings features are identified as the dominant ones for T g . MD simulations further unravel the fundamental roles of those chemical building blocks in dynamical heterogeneity and local mobility of CPs at a molecular level. The developed ML model is demonstrated for its capability of predicting T g of several new high-performance solar cell materials to a good approximation. The established predictive framework facilitates the design and prediction of T g of complex CPs, paving the way for addressing device stability issues that have hampered the field from developing stable organic electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of Tethering Anions in Block Copolymer Electrolytes via Molecular Dynamics Simulations

Ion-containing block copolymers (BCPs) are promising solid-state electrolytes as they can combine ion conduction and mechanical robustness via multiple microphases. However, salt-doped BCPs can have low ion conduction and transference number. One strategy to increase transference number is to tether anions to the polymer backbone (creating a single-ion conductor), though this may impact cation mobility. Leveraging coarse-grained molecular dynamics simulations, we compare the effects of ion concentration and polymer dielectric constant on BCPs with and without bonding anions to the chain (without changing any other chemical properties). We find that single-ion BCPs have higher cation conductivity than analogous salt-doped BCPs, especially at moderate ion concentrations. Furthermore, we also compare several structural features of these systems; notably, tethering anions causes the ions to spread more evenly throughout the conducting phase, which is related to improved cation conduction.

25 ENERGY STORAGE↗
DOE OSTI2022

The Dynamics of Ions on Phased Radio-frequency Carpets in High Pressure Gases and Application for Barium Tagging in Xenon Gas Time Projection Chambers

Radio-frequency (RF) carpets with ultra-fine pitches are examined for ion transport in gases at atmospheric pressures and above. We develop new analytic and computational methods for modeling RF ion transport at densities where dynamics are strongly influenced by buffer gas collisions. An analytic description of levitating and sweeping forces from phased arrays is obtained, then thermodynamic and kinetic principles are used to calculate ion loss rates in the presence of collisions. This methodology is validated against detailed microscopic SIMION simulations. We then explore a parameter space of special interest for neutrinoless double beta decay experiments: transport of barium ions in xenon at pressures from 1 to 10 bar. Our computations account for molecular ion formation and pressure dependent mobility as well as finite temperature effects. We discuss the challenges associated with achieving suitable operating conditions, which lie beyond the capabilities of existing devices, using presently available or near-future manufacturing techniques.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Atmospheric-pressure ionization and fragmentation of molecules for structural elucidation

A solution-cathode glow discharge (SCGD) spectrometry apparatus may comprise an SCGD source and a mass or ion mobility spectrometer. A method for ionizing a molecular analyte may comprise contacting the molecular analyte with a plasma discharge to form ions and separating the ions in a mass spectrometer or ion mobility spectrometer. The contacting step may occur under atmospheric pressure and/or ambient conditions. The molecular analyte may be fragmented by the plasma discharge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Fine‐Tuning Alkyl Chains on Quinoxaline Nonfullerene Acceptors Enables High‐Efficiency Ternary Organic Solar Cells with Optimizing Molecular Stacking and Reducing Energy Loss

Abstract Material design of guest acceptor is always a big challenge for improving the efficiency of ternary organic solar cells (OSCs). Here, a pair of isomeric nonfullerene acceptors based on quinoxaline core, Qx–p‐C 7 H 8 O and Qx–m‐C 7 H 8 O, is designed and synthesized. By moving the alkoxy chain attached on side phenyl frommeta‐position topara‐position, both π–π stacking distance and crystallinity are enhanced simultaneously. They obtain the uplifted lowest unoccupied molecular orbital level. Compared to Qx–m‐C 7 H 8 O, Qx–p‐C 7 H 8 O exhibits wider absorption spectrum and higher extinction coefficient. Using D18‐Cl:N3 as host materials, the addition of guest acceptor Qx–p‐C 7 H 8 O significantly improves the power conversion efficiency (PCE) from 17.61% to 18.49% because of higher open‐circuit voltage (0.875 V) and short‐circuit current density (27.85 mA cm −2 ). This can be attributed to the faster exciton dissociation, more balanced carrier mobility, fine fiber morphology, and lower energy loss in the ternary devices. However, Qx–m‐C 7 H 8 O‐based ternary device achieves relatively low PCE of 17.17% because this device shows extremely low electron mobility. The results indicate that molecular stacking, film morphology, etc., can be effectively modulated by fine‐tuning the side chains of guest materials, which may be an effective design rule for further improving the PCE of OSCs.

Chemistry↗
DOE OSTI2024

Signatures of cysteine oxidation on muscle structural and contractile proteins are associated with physical performance and muscle function in older adults: Study of Muscle, Mobility and Aging (SOMMA)

Oxidative stress is considered a contributor to declining muscle function and mobility during aging; however, the underlying molecular mechanisms remain poorly described. We hypothesized that greater levels of cysteine (Cys) oxidation on muscle proteins are associated with decreased measures of mobility. Herein, we applied a novel redox proteomics approach to measure reversible protein Cys oxidation in vastus lateralis muscle biopsies collected from 56 subjects in the Study of Muscle, Mobility and Aging (SOMMA), a community-based cohort study of individuals aged 70 years and older. We tested whether levels of Cys oxidation on key muscle proteins involved in muscle structure and contraction were associated with muscle function (leg power and strength), walking speed, and fitness (VO 2 peak on cardiopulmonary exercise testing) using linear regression models adjusted for age, sex, and body weight. Higher oxidation levels of select nebulin Cys sites were associated with lower VO 2 peak, while greater oxidation of myomesin-1, myomesin-2, and nebulin Cys sites was associated with slower walking speed. Higher oxidation of Cys sites in key proteins such as myomesin-2, alpha-actinin-2, and skeletal muscle alpha-actin were associated with lower leg power and strength. We also observed an unexpected correlation (R = 0.48) between a higher oxidation level of eight Cys sites in alpha-actinin-3 and stronger leg power. Despite this observation, the results generally support the hypothesis that Cys oxidation of muscle proteins impairs muscle power and strength, walking speed, and cardiopulmonary fitness with aging.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Ionic Dopant-Induced Ordering Enhances the Thermoelectric Properties of a Polythiophene-Based Block Copolymer

Conjugated polymer-based block copolymers (CP-BCPs) are an unexplored class of materials for organic thermoelectrics. In this study, the authors report on the electronic conductivity (σ) and Seebeck coefficient (α) of a newly synthesized CP-BCP, poly(3-hexylthiophene)-block-poly (oligo-oxyethylene methacrylate) (P3HT-b-POEM), upon solution co-processing with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and subsequently vapor-doping with a molecular dopant, 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). It is found that the addition of the hydrophilic block POEM greatly enhances the processability of P3HT, enabling homogeneous solution-mixing with LiTFSI. Notably, interactions between P3HT-b-POEM with ionic species significantly improve molecular order and unexpectedly cause electrical oxidizing doping of P3HT block both in solution and solid-states, a phenomenon that has not been previously observed in Li-salt containing P3HT. Vapor doping of P3HT-b-POEM-LiTFSI thin films with F4TCNQ further enhances σ and yields a thermoelectric power factor PF = α 2 σ of 13.0 μW m -1 K -2 , which is more than 20 times higher than salt-free P3HT-b-POEM sample. Through modeling thermoelectric behaviors of P3HT-b-POEM with the Kang-Snyder transport model, the improvement in PF is attributed to higher electronic charge mobility originating from the enhanced molecular ordering of P3HT. The results demonstrate that solution co-processing CP-BCPs with a salt is a powerful method to control structure and performance of organic thermoelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-Temperature Mobility of Tungsten Grain Boundaries

The objective of this study is to assess the effect of hydrogen isotopes on mechanical properties of tungsten relevant to first-wall applications in a tokamak. We report progress on calculation of the mobility of tungsten grain boundaries at high temperature, a key property in the process of recrystallization. In prior work we studied tungsten grain boundary properties such as the energies of boundaries with various orientations and misorientations, including energies of grain boundary phases that differ in structure from those at low temperature. We have calculated properties associated with the grain boundary mobility including the response of grain boundaries to applied shear stress. Here we report direct calculation of the motion of curved grain boundaries at high temperature using molecular dynamics. We compute how the mobility increases with temperature and how the mobility depends on the grain boundary misorientation. These calculations form baseline data to calculate the change when hydrogen or other defects are present.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Surface Hydroxyls of Imogolite Nanotubes Drive Distinct Structures and Mobility Differentiation of Nanoconfined Water

Abstract Nanoconfined fluids, particularly water, govern subsurface geochemistry, yet the molecular-level mechanisms by which mineral surfaces dictate confined water structure and mobility remain poorly resolved. Here, we combine solution- and solid-state proton (1H) NMR spectroscopy, NMR relaxometry, modulated-gradient spin–echo (MGSE) NMR diffusometry, infrared spectroscopy, and molecular dynamics simulations to demonstrate that surface hydroxyls drive the structural and dynamic differentiation of water in imogolite nanotubes. In saturated suspensions, we observe the coexistence of distinct water 1H environments, each exhibiting significantly reduced mobility, which we attribute to strong interactions with the imogolite surfaces. As more mobile water is removed, long-range water diffusivity in the fibrous solid samples slows to 1.6 × 10–10 m2·s–1 while local fluctuations increase to 3.4 × 10–8 m2·s–1, indicating a significant increase in molecular restriction through surface interactions. Together, our experiments reveal three coexisting populations with varied structures and mobilities, all distinct from liquid bulk water. We resolve a persistent solid-like interfacial layer strongly bound to surface hydroxyls, characterized by an unusually short T2 (<1 ms), and a very close effective 1H–1H distance of ∼1.55 Å between water and the inner-surface silanol group. An inner-core population occupying the inner cavity exhibits an intermediate dynamic regime with restricted axial diffusion, while outer-surface water associated with aluminum hydroxyls retains relatively higher mobility. These results experimentally substantiate a hierarchy of water populations in imogolite and show how surface chemistry dictates the structures and dynamics of confined water.

Fleming, Xander B. [Earth and Environmental Scienc↗
DOE OSTI2022

Siloxane-functional small molecule acceptor for high-performance organic solar cells with 16.6% efficiency

As one of the simple but most effective molecular design strategies, side-chain engineering has been widely employed to modify the photoelectric properties of active layer materials for boosting the photovoltaic performance of organic solar cells (OSCs). In this work, a functionalized small molecule acceptor (SMA) named BTSi-4F with a bulky siloxane-terminated solubilizing group as side-chains, derived from a classical SMA of Y6, was designed and synthesized. The results demonstrate that the introduction of siloxane-functional terminated groups into SMA not only affects the optical absorption and molecular energy levels, but also regulates the miscibility between the polymer donor and SMA. Compared to the original Y6, BTSi-4F exhibits a better solubility, upshifted lowest unoccupied molecular orbital (LUMO) energy level, more ordered molecular packing, and higher electron-mobility. Matched with a wide bandgap polymer donor PM6, the chlorobenzene-processed OSCs based on PM6:BTSi-4F achieved a superior power conversion efficiency (PCE) of 16.6% with both high open-circuit voltage (V oc ) of 0.90 V and high fill factor (FF) of 0.77, while the devices based on PM6:Y6 obtained a much lower PCE of 13.0% with a V oc of 0.81 V and FF of 0.69 under the same conditions. This work offers a promising molecular design strategy of siloxane-terminated side chain engineering to develop high-performance SMAs for efficient OSCs.

14 SOLAR ENERGY↗
DOE OSTI2023

Molecular Dynamics Simulation of Pore-Size Effects on Gas Adsorption Kinetics in Zeolites

Strong gas-mineral interactions or slow adsorption kinetics require a molecular-level understanding of both adsorption and diffusion for these interactions to be properly described in transport models. In this combined molecular simulation and experimental study, noble gas adsorption and mobility is investigated in two naturally abundant zeolites whose pores are similar in size (clinoptilolite) and greater than (mordenite) the gas diameters. Simulated adsorption isotherms obtained from grand canonical Monte Carlo simulations indicate that both zeolites can accommodate even the largest gas (Rn). However, gas mobility in clinoptilolite is significantly hindered at pore-limiting window sites, as seen from molecular dynamics simulations in both bulk and slab zeolite models. Further, experimental gas adsorption isotherms for clinoptilolite confirm the presence of a kinetic barrier to Xe uptake, resulting in the unusual property of reverse Kr/Xe selectivity. Finally, a kinetic model is used to fit the simulated gas loading profiles, allowing a comparison of trends in gas diffusivity in the zeolite pores.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Dataset_for_Molecular_Motion_Below_the_Glass_Transition_A_Solid-State_NMR_Study_of_Siloxane_Polymer_Dynamics Study

This dataset contains solid-state 1H and 13C NMR relaxometry data, differential scanning calorimetry (DSC) data, and size exclusion chromatography (SEC/GPC) data supporting the study of sub-glass-transition (sub-Tg) molecular dynamics in a composition- and sequence-controlled series of diphenyl-substituted polysiloxanes (PDMS, 14Ph, 33Ph, 50Ph, 67Ph, and 100Ph; 0–100% diphenylsiloxane content by mole).All solid-state NMR data were acquired on a 200 MHz Bruker Avance III HD spectrometer using a static 7 mm HX probe or a 4 mm HX probe under 4 kHz magic-angle spinning. Raw Bruker TopSpin experiment folders are included for: (1) variable-temperature 1H lineshape measurements used to determine linewidth (FWHM) as a function of temperature across the glass transition; (2) 1H T1 (saturation recovery with solid-echo detection), probing nanosecond-scale dynamics near the 1H Larmor frequency; (3) 1H T1rho (direct spin-lock, 62.5 kHz), probing microsecond-scale segmental dynamics; (4) 13C-detected Lee–Goldburg cross-polarization 1H T1rho (LGCPH T1rho) for 33Ph and 50Ph, resolving aromatic and aliphatic proton environments; and (5) 13C T1 relaxation for 33Ph and 50Ph. Differential scanning calorimetry data (TA Instruments DSC 25, −150 to +120 °C, up to +300 °C for 100Ph, 10 °C/min) are included for all six compositions and support the glass-transition temperatures in Table 1 and Figure 1. Size exclusion chromatography data (Agilent 1200 Series, PL-Gel 300 mixed-C column, THF mobile phase, polystyrene calibration standards) are included for the three synthesized copolymers (33Ph, 50Ph, 67Ph) and support the number-average molecular weights in Table 1. Processed data include per-composition relaxation-time summaries (Excel), curve-fitting and Bloembergen-Purcell-Pound (BPP) model analysis notebooks (Jupyter/Python), and Igor Pro (.pxp) master files used to generate the manuscript's figures.

Bloembergen-Purcell-Pound theory↗