Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multivariate outputs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Multivariable identification using centralized fixed modes

A procedure to determine a state space model of a multivariable system (lambda inputs, m outputs) is presented. The model is suitable for control studies and uses single input, single output (SISO) system data in the identification procedure. The procedure can be defined in three distinct steps. First, the system's lambda x m SISO transfer functions are identified by using any standard or known identification technique for SISO systems. One objective of this step is to identify SISO transfer functions with as few distinct modes as possible between any two functions. Second, the time domain realization of each SISO transfer function is obtained in a straightforward manner and combined into a total multivariable realization. This total realization, in all probability, has more state variables than are required to define system response. In the third step, these excess or redundant states are removed by using minimal realization theory. The remaining states are related to system centralized fixed modes. Eigenvalue-eigenvector techniques were recently reported that yield a computationally feasible solution to the problem posed in step three. The procedure is applied to QCSEE data to demonstrate its feasibility.

Merrill, W. C.↗

Identification of multivariable high performance turbofan engine dynamics from closed loop data

The multivariable instrumental variable/approximate maximum likelihood (IV/AML) method or recursive time-series analysis is used to identify the multivariable (four inputs-three outputs) dynamics of the Pratt and Whitney F100 engine. A detailed nonlinear engine simulation is used to determine linear engine model structures and parameters at an operating point using open loop data. Also, the IV/AML method is used in a direct identification mode to identify models from actual closed loop engine test data. Models identified from simulated and test data are compared to determine a final model structure and parameterization that can predict engine response for a wide class of inputs. The ability of the IV/AML algorithm to identify useful dynamic models from engine test data is assessed.

Merrill, W.↗

Identification of multivariable high performance turbofan engine dynamics from closed loop data

The multivariable instrumental variable/approximate maximum likelihood (IV/AML) method of recursive time-series analysis is used to identify the multivariable (four inputs-three outputs) dynamics of the Pratt and Whitney F100 engine. A detailed nonlinear engine simulation is used to determine linear engine model structures and parameters at an operating point using open loop data. Also, the IV/AML method is used in a direct identification made to identify models from actual closed loop engine test data. Models identified from simulated and test data are compared to determine a final model structure and parameterization that can predict engine response for a wide class of inputs. The ability of the IV/AML algorithm to identify useful dynamic models from engine test data is assessed. Previously announced in STAR as N82-20339

Merrill, W.↗

Fixed order dynamic compensation for multivariable linear systems

This paper considers the design of fixed order dynamic compensators for multivariable time invariant linear systems, minimizing a linear quadratic performance cost functional. Attention is given to robustness issues in terms of multivariable frequency domain specifications. An output feedback formulation is adopted by suitably augmenting the system description to include the compensator states. Either a controller or observer canonical form is imposed on the compensator description to reduce the number of free parameters to its minimal number. The internal structure of the compensator is prespecified by assigning a set of ascending feedback invariant indices, thus forming a Brunovsky structure for the nominal compensator.

Kramer, F. S.↗

STITCHES: creating new scenarios of climate model output by stitching together pieces of existing simulations

Abstract. Climate model output emulation has long been attempted to support impact research, mainly to fill in gaps in the scenario space. Given the computational cost of running coupled earth system models (ESMs), which are usually the domain of supercomputers and require on the order of days to weeks to complete a century-long simulation, only a handful of different scenarios are usually chosen to externally force ESM simulations. An effective emulator, able to run on standard computers in times of the order of minutes rather than days could therefore be used to derive climate information under scenarios that were not run by ESMs. Lately, the necessity of accounting for internal variability has also made the availability of initial-condition ensembles, under a specific scenario, important, further increasing the computational demand. At least so far, emulators have been limited to simplified ESM-like output, either seasonal, annual, or decadal averages of basic quantities, like temperature and precipitation, often emulated independently of one another. With this work, we propose a more comprehensive solution to ESM output emulation. Our emulator, STITCHES, uses existing archives of earth system models' (ESMs) scenario experiments to construct ESM-like output under new scenarios or enrich existing initial-condition ensembles, which is what other emulators also aim to do. Importantly, however, STITCHES' output has the same characteristics of the ESM output it sets out to emulate: multivariate, spatially resolved, and high frequency, representing both the forced component and the internal variability around it. STITCHES extends the idea of time sampling – according to which climate outcomes are stratified by the global warming level at which they manifest themselves, irrespective of the scenario and time at which they occur – to the construction of a continuous history of ESM-like output over the whole 21st century, consistent with a 21st-century trajectory of global surface air temperature (GSAT) derived from the scenario that has been chosen as the target of the emulation. STITCHES does so by first splitting the target GSAT trajectory into decade-long windows, then matching each window in turn to a decade-long window within an existing model simulation from the available scenario runs according to its proximity to the target in absolute size of the temperature anomaly and its rate of change. A look-up table is therefore created of a sequence of existing experiment–time-window combinations that, when stitched together, create a GSAT trajectory “similar” to the target. Importantly, we can then stitch together much more than GSAT from these windows, i.e., any output that the ESM has saved for these existing experiment–time-window combinations, at any frequency and spatial scale available in its archive. We show that the stitching does not introduce artifacts in the great majority of cases (we look at temperature and precipitation at monthly frequency and on the native grid of the ESM and at an index of ENSO activity, the Southern Oscillation Index). This is true even if the criteria for the identification of the decades to be stitched together are chosen to work for a smoothed time series of annual GSAT, a result we expect given the larger amount of noise affecting most other variables at finer spatial scales and higher frequencies, which therefore are more “forgiving” of the stitching. We successfully test the method's performance over many ESMs and scenarios. Only a few exceptions surface, but these less-than-optimal outcomes are always associated with a scarcity of the archived simulations from which we can gather the decade-long windows that form the building blocks of the emulated time series. In the great majority of cases, STITCHES' performance is satisfactory according to metrics that reward consistency in trends, interannual and inter-ensemble variance, and autocorrelation structure of the time series stitched together. The method therefore can be used to create ESM-like output according to new scenarios, on the basis of a trajectory of GSAT produced according to that scenario, which could be easily obtained by a simple climate model. It can also be used to increase the size of existing initial-condition ensembles. There are aspects of our emulator that will immediately disqualify it for specific applications, like when climate information is needed whose characteristics result from accumulated quantities over windows of times longer than those used as pieces by STITCHES, droughts longer than a decade for example. But for many applications, we argue that a stitched product can satisfy the climate information needs of impact researchers. STITCHES cannot emulate ESM output from scenarios that result in GSAT trajectories outside of the envelope available in the archive, nor can it emulate trajectories with shapes different from existing ones (overshoots with negative derivative, for example). Therefore, the size and characteristics of the available archives of ESM output are the principal limitations for STITCHES' deployment. Thus, we argue for the possibility of designing scenario experiments within, for example, the next phase of the Coupled Model Intercomparison Project according to new principles, relieved of the need to produce a number of similar trajectories that vary only in radiative forcing strength but more strategically covering the space of temperature anomalies and rates of change.

54 ENVIRONMENTAL SCIENCES↗

Interactive XCMS Online: Simplifying Advanced Metabolomic Data Processing and Subsequent Statistical Analyses

XCMS Online (xcmsonline.scripps.edu) is a cloud-based informatic platform designed to process and visualize mass-spectrometry-based, untargeted metabolomic data. Initially, the platform was developed for two-group comparisons to match the independent, “control” versus “disease” experimental design. Here, we introduce an enhanced XCMS Online interface that enables users to perform dependent (paired) two-group comparisons, meta-analysis, and multigroup comparisons, with comprehensive statistical output and interactive visualization tools. Newly incorporated statistical tests cover a wide array of univariate analyses. Multigroup comparison allows for the identification of differentially expressed metabolite features across multiple classes of data while higher order meta-analysis facilitates the identification of shared metabolic patterns across multiple two-group comparisons. Given the complexity of these data sets, we have developed an interactive platform where users can monitor the statistical output of univariate (cloud plots) and multivariate (PCA plots) data analysis in real time by adjusting the threshold and range of various parameters. On the interactive cloud plot, metabolite features can be filtered out by their significance level (p-value), fold change, mass-to-charge ratio, retention time, and intensity. The variation pattern of each feature can be visualized on both extracted-ion chromatograms and box plots. The interactive principal component analysis includes scores, loadings, and scree plots that can be adjusted depending on scaling criteria. The utility of XCMS functionalities is demonstrated through the metabolomic analysis of bacterial stress response and the comparison of lymphoblastic leukemia cell lines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using AI/ML to Address Satellite Cloud Remote Sensing Challenges

Various AI/ML tools, employed within the Clouds and the Earth's Radiant Energy System (CERES) Satellite Cloud and Radiation Property retrieval System (SatCORPS) project, are being used to mitigate satellite radiance artifacts and thereby yield more accurate cloud and radiation data products. Neural network and K-nearest neighbor approaches have been developed that enable us to better address common passive satellite remote sensing challenges, such as corrupted imagery, day/night cloud property discontinuities, solar terminator artifacts, inadequate knowledge of the land surface emission temperature (i.e., skin temperature), and poor assumptions about vertical cloud structure, that have otherwise proven difficult to solve using more conventional methods. Fixing these problems promotes a more consistent Earth radiation budget record. These efforts demonstrate effective use of AI/ML architecture to exploit complex, multivariate predictor relationships and produce usable output at satellite spatial and temporal resolutions that would otherwise be ignored or have large biases.

Benjamin Scarino↗

Diurnal Variability of Vertical Structure from a TRMM Passive Microwave "Virtual Radar" Retrieval

Robust description of the diurnal cycle from TRMM observations is complicated by the limitations of Low Earth Orbit (LEO) sampling; from a 'climatological' perspective, sufficient sampling must exist to control for both spatial and seasonal variability, before tackling an additional diurnal component (e.g., with 8 additional 3-hourly or 24 1-hourly bins). For documentation of vertical structure, the narrow sample swath of the TRMM Precipitation Radar limits the resolution of any of these components. A neural-network based 'virtual radar" retrieval has been trained and internally validated, using multifrequency / multipolarization passive microwave(TM1) brightness temperatures and textures parameters and lightning (LIS) observations, as inputs, and PR volumetric reflectivity as targets (outputs). By training the algorithms (essentially highly multivariate, nonlinear regressions) on a very large sample of high-quality co-located data from the center of the TRMM swath, 3D radar reflectivity and derived parameters (VIL, IWC, Echo Tops, etc.) can be retrieved across the entire TMI swath, good to 8-9% over the dynamic range of parameters. As a step in the retrieval (and as an output of the process), each TMI multifrequency pixel (at 85 GHz resolution) is classified into one of the 25 archetypal radar profile vertical structure "types", previously identified using cluster analysis. The dynamic range of retrieved vertical structure appears to have higher fidelity than the current (Version 6) experimental GPROF hydrometeor vertical structure retrievals. This is attributable to correct representation of the prior probabilities of vertical structure variability in the neural network training data, unlike the GPROF cloud-resolving model training dataset used in the V6 algorithms. The LIS lightning inputs are supplementary inputs, and a separate offline neural network has been trained to impute (predict) LIS lightning from passive-microwave-only data. The virtual radar retrieval is thus, in principle, extensible to Aqua/AMSR-E and NPOESS/CMIS passive microwave instruments. The virtual radar approach yields a threefold increase in effective sampling from the mission, albeit of lower-quality "retrieved" data, reducing the variance of local estimates by one third (or the standard deviation by-0.57). In this talk, the variance reduction is leveraged to more finely resolve global diurnal variability in both space and time (local hour).

Boccippio, Dennis J.↗

'Disturbance zeros' in multivariable systems

Zeros of the transfer matrix relating the outputs to the disturbances ('disturbance zeros') of a linear time-invariant system are defined. It is shown that these zeros are invariant under output feedback to control inputs but not under state feedback to control inputs, and the effect of state feedback on disturbance zeros is studied. The results are used to develop an algorithm for assigning disturbance zeros and system poles by means of state feedback. As an application of the algorithm, it is shown that the disturbance zeros can be positioned such that the effect of a class of disturbances at the outputs is eliminated in the steady state. An example is given to illustrate the main results of the paper.

Patel, R. V.↗

A reduced adaptive observer for multivariable systems

An adaptive observer for multivariable systems of order n having p output measurements is developed. The adaptive observer allows both the generation of the state of the system and - at least - the partial identification of the unknown parameters of the system. The order of this adaptive observer is n - p plus 1. The adaptive algorithm, based upon Liapunov synthesis, may be implemented in real time without the use of derivative operators. Eigenvalues of the observer may be arbitrarily or almost arbitrarily located. With some mild restriction upon the structure of the multivariable system, and upon the command system input, both generation of state and identification of parameters is guaranteed globally.

Carroll, R. L.↗

Pole-placement with constant gain output feedback

Davison (1970) has demonstrated that it is possible to assign max (m, p) poles of a linear time-invariant controllable and observable multivariable system arbitrarily close to desired locations by using constant gain output feedback. A new proof of Davison's theorem on pole placement is developed, and a system design procedure is described which offers some advantages over Davison's method. It is shown that in some cases more than max (m, p) poles can be assigned arbitrarily, and a least square design procedure is proposed to approximate the desired pole locations when it is not possible to place all the poles.

Sridhar, B.↗

Multivariable system synthesis with step disturbance rejection

The primary objective of this paper is to present a constructive procedure for the synthesis of linear multivariable systems whose entire internal state and output are corrupted by unknown step disturbances. It is assumed that the dynamical behavior of the system is expressed in any one of three equivalent ways - i.e., the state space representation, the controllable and observable differential operator representation, and the transfer matrix representation. In terms of the transfer matrix representation, T(s), the synthesis procedure is shown to be capable of producing any stable, desired closed loop transfer matrix, Td(s), which can be expressed as the product of T(s) and any proper rational matrix, Tc(s), while simultaneously eliminating the steady-state effect of step disturbances at the output of the system. Furthermore, the synthesis scheme outlined employes only the known, directly measurable input and output signals.

Wolovich, W. A.↗

Flight test trajectory controller synthesis with constrained eigenstructure assignment

The design of a maneuver autopilot for flight test trajectory control using constrained eigenvalue/eigenvector assignment is examined. The aircraft considered was a high-performance fighter with a command augmentation system engaged in all three axes. Attention is given to difficulties encountered in the generation of the desired eigenvalues and eigenvectors. It is found that this approach demands several iterations to converge to a satisfactory result, and does not appear to easily yield suitable insight for the output feedback design of high-order multivariable systems which will be used at other operating points. It is concluded that this technique could be made more attractive by generating gradients of the eigensystem between flight conditions, and including this information in the single-point design technique.

Menon, P. K. A.↗

A multivariable control scheme for robot manipulators

The article puts forward a simple scheme for multivariable control of robot manipulators to achieve trajectory tracking. The scheme is composed of an inner loop stabilizing controller and an outer loop tracking controller. The inner loop utilizes a multivariable PD controller to stabilize the robot by placing the poles of the linearized robot model at some desired locations. The outer loop employs a multivariable PID controller to achieve input-output decoupling and trajectory tracking. The gains of the PD and PID controllers are related directly to the linearized robot model by simple closed-form expressions. The controller gains are updated on-line to cope with variations in the robot model during gross motion and for payload change. Alternatively, the use of high gain controllers for gross motion and payload change is discussed. Computer simulation results are given for illustration.

Tarokh, M.↗

Projected changes in the terrestrial and oceanic regulators of climate variability across sub-Saharan Africa

Future changes in the sign and intensity of ocean–land–atmosphere interactions have been insufficiently studied, despite implications for regional climate change projections, extreme event statistics, and seasonal climate predictability. In response to this deficiency, the present study focuses on projected responses to the enhanced greenhouse effect in: (1) the mean state of the atmosphere and land surface; (2) oceanic and terrestrial drivers of sub-Saharan climate variability; and (3) total seasonal climate predictability of sub-Saharan Africa, a region known for its pronounced land–atmosphere coupling. Analysis focuses on output from 23 Earth System Models in the Coupled Model Intercomparison Project Phase Five for the late twentieth and twenty-first centuries. It is projected that the greatest warming across sub-Saharan Africa will occur over the Sahel, the monsoon season will become more persistent into late summer and autumn, short rains in the Horn of Africa (HOA) will intensify, and leaf area index will increase across the HOA. Stepwise Generalized Equilibrium Feedback Assessment, i.e. a multivariate statistical approach, is applied to the model output over sub-Saharan Africa in order to explore the oceanic and terrestrial drivers of regional climate. The models indicate that the study region’s climate variability is dominated by oceanic drivers, with secondary contributions from soil moisture and very modest impacts from vegetation. Overall, the general model consensus of future projections indicates a concerning diminished seasonal predictability of sub-Saharan African regional climate based on key oceanic and terrestrial predictors and an elevated role of the land surface (associated with soil moisture anomalies) compared to oceanic drivers in regulating regional climate variability.

54 ENVIRONMENTAL SCIENCES↗

Stochastic simulation of predictive space–time scenarios of wind speed using observations and physical model outputs

We propose a statistical space-time model for predicting atmospheric wind speed based on deterministic numerical weather predictions and historical measurements. We consider a Gaussian multivariate space-time framework that combines multiple sources of past physical model outputs and measurements in order to produce a probabilistic wind speed forecast within the prediction window. We illustrate this strategy on wind speed forecasts during several months in 2012 for a region near the Great Lakes in the United States. The results show that the prediction is improved in the mean-squared sense relative to the numerical forecasts as well as in probabilistic scores. Moreover, the samples are shown to produce realistic wind scenarios based on sample spectra and space-time correlation structure.

54 ENVIRONMENTAL SCIENCES↗

Remote sensing of ice phenomena from orbit by signal correlation of multiple receiver responses

The method of signal correlation of microwave responses as applied to the measurement of Earth-surface ice temperatures from orbit is explained and summarized. Ice temperatures are estimated by a correlation function that is derived from the processes of a forward stepwise correlator. Subsets of the post-detected outputs of microwave receiving channels are combined in a multivariate cross-correlation function which operates as a spatial filter and serves to improve the spatial resolution of the thermal gradients in ice structures. The correlator is designed to selectively identify the correlative components among the microwave responses and to strongly suppress or cancel the non-correlative components appearing in the post-detected outputs.

Stacey, J. M.↗